aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-22i40e: Explicitly write platform-specific mac address after PF resetTushar Dave1-38/+49
i40e PF reset clears mac filters. If platform-specific mac address is used, driver has to explicitly write default mac address to mac filters otherwise all incoming traffic destined to default mac address will be dropped after reset. This issue was found on SPARC while toggling i40e ntuple via ethtool. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: add missing link advertise settingStefan Assmann1-0/+1
Adding the missing link advertise for some X710 NICs. This can be observed by simply calling ethtool on the interface. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported [...] With fix applied. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 10000baseT/Full [...] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Move the mutex lock in i40e_client_unregisterCatherine Sullivan1-2/+2
We need to lock the client list around the i40e_client_release call to prevent the release from interrupting the client instances while they are being added. Change-Id: I99993f20179aaf8730207833e7d0869d2ccffa1d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove redundant memsetAmitoj Kaur Chawla1-1/+0
Remove redundant call to memset before a call to memcpy. The Coccinelle semantic patch used to make this change is as follows: @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari2-2/+2
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: refactor Rx filter handlingMitch Williams3-279/+261
Properly track filter adds and deletes so the driver doesn't lose filters during resets and up/down cycles. Add a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Implement a simple state machine so the driver can track the status of each filter throughout its lifecycle. Properly manage the overflow promiscuous state for the each VSI, and provide a way for the driver to detect when to exit overflow promiscuous mode. Remove all possible default MAC filters that the firmware may have set up so that the driver can manage these correctly, particularly when VLANs come into play. Remove the LAA flag for filters; instead just send whatever we get through set_mac to the firmware as the LAA for wakeup purposes. Finally, add the state of each filter to debugfs output so we can see what's going on inside the driver's pointy little head. Change-ID: I97c5e366fac2254fa01eaff4f65c0af61dcf2e1f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40evf: add hyperv dev idsJoshua Hay1-0/+2
This patch adds the Hyper-V specific VF device ids. Change-ID: I9c4fe6d8dfd34f7f68ebc9fdae225c8768439c89 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan5-5/+0
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams2-5/+2
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Fix to show correct Advertised Link Modes when link is downAvinash Dayanand1-19/+28
When link is down, Advertised Link Modes was wrongly displaying full supported link modes instead of Advertised link mode. Added conditional checks in order to make sure correct Advertised link modes are displayed when the link is down. Change-ID: I8a61413f9ee174149c7a33157b5f0b0a8da9842d Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: avoid null pointer dereferenceHeinrich Schuchardt1-1/+3
In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22macsec: enable GRO and RPS on macsec devicesPaolo Abeni1-7/+25
Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/mlx4_en: use READ_ONCE when freeing xdp_progBrenden Blanco1-2/+4
For consistency, and in order to hint at the synchronous nature of the xdp_prog field, use READ_ONCE in the destroy path of the ring. All occurrences should now use either READ_ONCE or xchg. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller9-167/+233
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2016-07-20 This series contains updates to fm10k only. Ngai-Mint provides a fix to clear PCIE_GMBX bits to ensure the proper functioning of the mailbox global interrupt after a data path reset. Jake provides most of the patches in the series, starting with a early return from fm10k_down() if we are already down to prevent conflict with other threads. Fixed an issue where fm10k_update_stats() could cause a null pointer dereference, specifically if it is called when we are going down and the rings have been removed. Cleans up and fixes the data path reset flow, Tx hang routine and stop_hw(). Re-worked the fm10k_reinit() to be more maintainable and fixed several inconsistencies with the work flow. Implemented fm10k_prepare_suspend() and fm10k_handle_resume() which abstract around the now existing fm10k_prepare_for_reset and fm10k_handle_reset. The new functions also handle stopping the service task, which is something that the original re-init flow does not need. Fixed an issue where if an FLR occurs, VF devices will be knocked out of bus master mode, and the driver will be unable to recover from the reset properly, so ensure bus master is enabled after every reset. Fixed an issue where a reset will occur as if for no reason, regularly every few minutes until the switch manager software is loaded, which is caused by continuously requesting the lport map so only do the request after we have verified the switch mailbox is tx_ready. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: dsa: mv88e6xxx: kill last locked reg_readVivien Didelot1-16/+19
Get rid of the last usage of the locked mv88e6xxx_reg_read function with a new mv88e6xxx_port_read helper, useful later for chips with different port registers base address. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: dsa: mv88e6xxx: rework EEPROM accessVivien Didelot2-283/+239
The 6352 family of switches and compatibles provide a 8-bit address and 16-bit data access to an optional EEPROM. Newer chip such as the 6390 family slightly changed the access to 16-bit address and 8-bit data. This commit cleans up the EEPROM access code for 16-bit access and makes it easy to eventually introduce future support for 8-bit access. Here's a list of notable changes brought by this patch: - provide Global2 unlocked helpers for EEPROM commands - remove eeprom_mutex, only reg_lock is necessary for driver functions - eeprom_len is 0 for chip without EEPROM, so return it directly - the Running bit must be 0 before r/w, so wait for Busy *and* Running - remove now unused mv88e6xxx_wait and mv88e6xxx_reg_write - other than that, the logic (in _{get,set}_eeprom16) didn't change Chips with an 8-bit EEPROM access will require to implement the 8-suffixed variant of G2 helpers and the related flag: #define MV88E6XXX_FLAGS_EEPROM8 \ (MV88E6XXX_FLAG_G2_EEPROM_CMD | \ MV88E6XXX_FLAG_G2_EEPROM_ADDR) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: dsa: mv88e6xxx: remove unused phy_mutexVivien Didelot1-6/+0
Only reg_lock is necessary now and phy_mutex is dead. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/faraday: Disallow using reversed MAC address from hardwareGavin Shan1-9/+0
The initial MAC address is retrieved from hardware if it's not provided by device-tree. The reserved MAC address from hardware will be used if non-reserved MAC address is invalid. It will cause mismatched MAC address seen by hardware and software. This disallows using the reserved hardware MAC address to avoid the mismatched MAC address seen by hardware and software. Fixes: 113ce107afe9 ("net/faraday: Read MAC address from chip") Suggested-by: David Laight <David.Laight@ACULAB.COM> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/mlx5e: Fix del vxlan port command buffer memsetSaeed Mahameed1-2/+2
memset the command buffers rather than the pointers to them. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20fm10k: bump version numberJacob Keller1-1/+1
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: return proper error code when pci_enable_msix_range failsJacob Keller1-1/+1
The pci_enable_msix_range() function returns a positive value of the number of allocated vectors if it succeeds. On failure it returns a negative error code. Return this code properly so that the error message printed by the driver will show the actual error code instead of being masked by -ENOMEM. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: force link to remain down for at least a second on resume eventsJacob Keller1-0/+4
When we resume from an AER recovery with many active VFs, the PF sees many spurious link up and link down events. Prevent this by delaying link down for at least one second after the resume event. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: implement request_lport_map pointerJacob Keller3-13/+9
If the fm10k interface is brought up, but the switch manager software is not running, the driver will continuously request the lport map every few seconds in the base driver watchdog routine. Eventually after several minutes the switch mailbox Tx fifo will fill up and the mailbox will timeout, resulting in a reset. This reset will appear as if for no reason, and occurs regularly every few minutes until the switch manager software is loaded. Prevent this from happening by only requesting the lport map after we've verified the switch mailbox is tx_ready. In order to simplify code logic and reduce code duplication, implement this as a new function pointer "mac.ops.request_lport_map" which the VF will not implement. Otherwise, we have to duplicate the tx_ready check outside of fm10k_get_host_state_generic, or re-implement most of fm10k_get_host_state_generic in the pf version. The resulting code is simpler and easier to understand, and prevents the PF from continuously requesting lport map and filling the Tx fifo of a switch mailbox that isn't ready. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: check if PCIe link is restoredJacob Keller1-0/+13
Sometimes, a VF driver will lose PCIe address access, such as due to a PF FLR event. In fm10k_detach_subtask, poll and check whether the PCIe register space is active again and restore the device when it has. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: enable bus master after every resetJacob Keller1-0/+2
If an FLR occurs, VF devices will be knocked out of bus master mode, and the driver will be unable to recover from the reset properly, resulting in malicious driver events and an infinite reset loop. In the normal case, the bus master mode will already be enabled and this call will essentially be a no-op. Since we're doing this every reset, it is possible we could remove the other calls to pci_set_master() but it seems not harmful to just leave them in place. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: use common flow for suspend and resumeJacob Keller1-70/+3
Continuing the effort to commonize the similar suspend/resume flows, finish up by using the new fm10k_handle_suspand and fm10k_handle_resume functions for the standard suspend/resume flow. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: implement reset_notify handler for PCIe FLR eventsJacob Keller1-0/+33
When a function level PCI reset is triggered using sysfs, it calls the driver's .reset_notify error handler. Implement a handler based on the now split fm10k_prepare_for_reset and fm10k_handle_reset functions, so that we fully reset the driver when the PCI function level reset occurs. This also ensures the reset is handled in a clean way by first disabling all the driver bits first and then restoring them after the function reset. Previously the stack simply performed a blind function reset and our driver didn't take any part in the process. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: use common reset flow when handling io errors from PCI stackJacob Keller1-53/+7
Now that we have extracted the necessary steps for a split suspend/resume flow, re-use these functions instead of using the current open coded flow. This ensures that we don't miss any steps. It also ensures that we have the correct driver states set. Since we'll be handling all of the reset flow ourselves, we no longer need to request a reset in the io_slot_reset() function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: implement prepare_suspend and handle_resumeJacob Keller1-0/+38
Implement fm10k_prepare_suspend and fm10k_handle_resume functions which abstract around the now existing fm10k_prepare_for_reset and fm10k_handle_reset. The new functions also handle stopping the service task, which is something that the original re-init flow does not need. Every other location that does a suspend/resume type flow is expected to use these functions, because otherwise they may have conflicts with the running watchdog routines. This also has the effect of preventing possible surprise remove events during handling of FLR events and PCIe errors. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: split fm10k_reinit into two functionsJacob Keller1-5/+28
There are several flows in the driver which perform the similar function of tearing down software and restoring software to recover from certain errors or PCIe events, including: * fm10k_reinit * fm10k_suspend/resume * fm10k_io_error_detected/fm10k_io_resume In addition, we want to implement a .reset_notify() handler as well which will also perform similar function. Rework how the driver codes reset and resume flows by separating out the reinit logic into two functions "fm10k_prepare_for_reset" and "fm10k_handle_reset". This first step will allow us to re-use this functionality in the similar blocks of code instead of re-coding the same sequence of events slightly different. The end result should be more maintainable and correct, fixing several inconsistencies with the work flow. The new functions expect to take the rtnl_lock() themselves, and it does have the unfortunate side effect of having the reinit flow take then release then take the rtnl_lock. However, this minor downside is out weighted by the benefits of code reduction and reducing needless difference between these flows. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: wait for queues to drain if stop_hw() fails onceJacob Keller3-7/+40
It turns out that sometimes during a reset the Tx queues will be temporarily stuck longer than .stop_hw() expects. Work around this issue by attempting to .stop_hw() first. If it tails, wait a number of attempts until the Tx queues appear to be drained. After this, attempt stop_hw() again. This ensures that we avoid waiting if we don't need to, such as during the first initialization of a VF, and give the proper amount of time necessary to recover from most situations. It is possible that the hardware is actually stuck. For PFs, this is usually fixed by a datapath reset. Unfortunately the VF cannot request a similar reset for itself. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: only warn when stop_hw fails with FM10K_ERR_REQUESTS_PENDINGJacob Keller1-1/+4
When stop_hw() routine fails with FM10K_ERR_REQUESTS_PENDING, this indicates that the Tx or Rx queues did not shutdown within the time limit. Print a more suitable message at the dev_info level instead of dev_err. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: use actual hardware registers when checking for pending TxJacob Keller1-3/+5
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: perform data path reset even when switch is not readyJacob Keller1-5/+0
A while ago, an additional check for the switch being ready was added to reset_hw. A recent refactor accidentally made this check return an error code on failure which caused fm10k_probe to fail when the switch wasn't brought up first. The original reasoning for the check was to prevent additional data path reset when the fabric wasn't ready yet. However, there isn't a compelling reason to keep the check, as the data path reset will restore hardware to a known good state. Remove the check and perform the data path reset regardless of the switch manager state. An alternative fix is to return FM10K_SUCCESS instead, and bypass the actual data path reset. This should be fine as we will perform a reset_hw once the switch is active. However, since data path reset will reset many parts of the hardware it seems better to just perform the reset regardless of switch state. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: don't stop reset due to FM10K_ERR_REQUESTS_PENDINGJacob Keller4-15/+24
Don't report FM10K_ERR_REQUESTS_PENDING when we fail to disable queues within the timeout. This can occur due to a hardware Tx hang, or when the switch ethernet fabric is resetting while we are transmitting traffic. It can sometimes take up to 500ms before the Tx DMA engine gives up. Instead, just skip the DMA engine check and perform a data-path reset anyways. Add a statistic counter to keep track of the number of resets occurring while we have pending DMA on the rings. In order to prevent having to re-assign err to 0, re-order the last few items of the reset_hw_pf function so that we don't perform "return err" at the end. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: Reset mailbox global interruptsNgai-Mint Kwan2-0/+6
When a data path reset is initiated, write control to the PCIE_GMBX is yanked from the switch manager. The switch manager writes to this register to clear mailbox global interrupt bits as part of its mailbox interrupt handling routine. When the device recovers from the data path reset and these bits are not cleared, it will prevent future mailbox global interrupts from being triggered. Upon confirming that the device has exited from a data path reset, clear these bits to ensure the proper functioning of the mailbox global interrupt. Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: prevent multiple threads updating statisticsJacob Keller2-0/+15
Also prevent updating stats while the interface is down. If we're already updating stats, just return doing nothing. When we take the device down, block stat updates until we come back up. This ensures that we avoid tearing down rings when we're updating statistics, and prevents updating statistics until we're up. We can't re-use the __FM10K_DOWN for this because it wouldn't prevent multiple threads from accessing statistics. Neither does it prevent the case where we start updating stats and then start going down in another thread. The fm10k_get_stats64 is except from this, because it has a completely different flow which does not suffer from the same issues as fm10k_update_stats might. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: avoid possible null pointer dereference in fm10k_update_statsJacob Keller1-2/+8
It's currently possible for fm10k_update_stats to be called during the window when we go down and the rings are removed. This can result in a null pointer dereference. In fm10k_get_stats64 we work around this by using ACCESS_ONCE and a null pointer check inside the loop. Use this same flow in the fm10k_update_stats to avoid the potential null pointer. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: no need to continue in fm10k_down if __FM10K_DOWN already setJacob Keller1-1/+2
Return early from fm10k_down() when we are already down, since that means another thread is either already finished or has started going down, so shouldn't conflict with them. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20mlxsw: spectrum: Expose per-tc counters via ethtoolIdo Schimmel2-1/+65
Expose the transmit queue length of each traffic class and the amount of unicast packets discarded due to insufficient room in the shared buffer. The first counter allows us to debug user priority to traffic class mapping, whereas the drop counter is useful when determining shared buffer configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20mlxsw: spectrum: Expose per-priority counters via ethtoolIdo Schimmel1-9/+107
Expose per-priority bytes / packets / PFC packets counters via ethtool. These counters are very useful when debugging QoS functionality and provide a better insight into the device's forwarding plane. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: cpmac: fix error handling of cpmac_probe()Wei Yongjun1-3/+2
Add the missing free_netdev() before return from function cpmac_probe() in the error handling case. This patch revert commit 0465be8f4f1d ("net: cpmac: fix in releasing resources"), which changed to only free_netdev while register_netdev failed. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/mlx5: Use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun1-8/+2
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: ethernet: nb8800: fix error handling of nb8800_probe()Wei Yongjun1-1/+1
In ops->reset() error handling case, clk_disable_unprepare() is missed before return from this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20wan/fsl_ucc_hdlc: use module_platform_driver to simplify the codeWei Yongjun1-12/+1
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20wan/fsl_ucc_hdlc: remove .owner field for driverWei Yongjun1-1/+0
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: axienet: Fix return value check in axienet_probe()Wei Yongjun1-2/+2
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 46aa27df8853 ('net: axienet: Use devm_* calls') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20wlcore: spi: fix build warning caused by redundant variableReizer, Eyal1-1/+0
The ret variable is unused in wlcore_probe_of() Remove it for fixing build warning. Fixes: 01efe65aba65 ("wlcore: spi: add wl18xx support") Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19net/mlx4_en: add xdp forwarding and data write supportBrenden Blanco5-8/+211
A user will now be able to loop packets back out of the same port using a bpf program attached to xdp hook. Updates to the packet contents from the bpf program is also supported. For the packet write feature to work, the rx buffers are now mapped as bidirectional when the page is allocated. This occurs only when the xdp hook is active. When the program returns a TX action, enqueue the packet directly to a dedicated tx ring, so as to avoid completely any locking. This requires the tx ring to be allocated 1:1 for each rx ring, as well as the tx completion running in the same softirq. Upon tx completion, this dedicated tx ring recycles pages without unmapping directly back to the original rx ring. In steady state tx/drop workload, effectively 0 page allocs/frees will occur. In order to separate out the paths between free and recycle, a free_tx_desc func pointer is introduced that is optionally updated whenever recycle_ring is activated. By default the original free function is always initialized. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: break out tx_desc write into separate functionBrenden Blanco1-58/+76
In preparation for writing the tx descriptor from multiple functions, create a helper for both normal and blueflame access. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.