aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-06-24qlcnic: Add support to enable/disable FW dump capabilityAnirban Chakraborty4-3/+28
In certain situations, it may be required to not enable FW dump capability. Add support to turn off/on FW dump capability. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: fix default operating state of interfaceAmit Kumar Salecha1-2/+2
Currently interface shows status as RUNNING, even if there is no link. To fix this, netif_carrier_off should be called qlcnic_open(). Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: fix initial number of msix entries in adapter.Sucheta Chakraborty2-5/+2
Calculation of number of MSI-X vectors was wrong on uniprocessor systems. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Add code to tune FW dumpAnirban Chakraborty2-6/+13
To accommodate change in FW dump template, it is required to modify the FW dump routine that captures cache data. Also, the default mask is changed to capture a dump that would cover all the protocols that this FW supports. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Remove holding api lock while taking the dumpAnirban Chakraborty2-9/+5
With the change in logic for taking FW dump across multiple drivers, there is no need to hold onto the api lock anymore in the fw dump path. Instead use rtnl_lock() to synchronize the access to FW dump data structs. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Add capability to take FW dump deterministicallySritej Velaga3-10/+27
In presence of multiple functions, current driver implementation does not guarantee that the FW dump is taken by the same function that forces it. Change it by adding a fw reset owner flag that could be changed in the device reset path and only when a function determines that it needs to reset it. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-23ixgbe: update driver version stringDon Skidmore2-5/+6
Update the ixgbe driver version string to better match the Source Driver with similar device support. Likewise update to the current LAD Linux versioning scheme. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix ring assignment issues for SR-IOV and drop casesAlexander Duyck2-3/+7
This change fixes the fact that we would trigger a null pointer dereference or specify the wrong ring if the rings were restored. This change makes certain that the DROP queue is a static value, and all other rings are based on the ring offsets for the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: disable RSC when Rx checksum is offEmil Tantilov1-11/+33
Disabling Rx checksumming leads to performance degradation due to RSC causing packets to have incorrect checksums. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: move reset code into a separate functionEmil Tantilov1-12/+14
Move reset code into a separate function to allow for reuse in other parts of the code. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: move setting RSC into a separate functionEmil Tantilov1-16/+18
Move setting RSC into a separate function to allow for reuse in other parts of the code. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add support for nfc addition and removal of filtersAlexander Duyck2-0/+290
This change is meant to allow for nfc to insert and remove filters in order to test the ethtool interface which includes it's own rules manager. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add support for displaying ntuple filters via the nfc interfaceAlexander Duyck2-0/+113
This code adds support for displaying the filters that were added via the nfc interface. This is primarily to test the interface for now, but I am also looking into the feasibility of moving all of the ntuple filter code in ixgbe over to the nfc interface since it seems to be better implemented. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add basic support for setting and getting nfc controlsAlexander Duyck1-0/+19
This change adds basic support for the obtaining of RSS ring counts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: update perfect filter framework to support retaining filtersAlexander Duyck4-280/+368
This change is meant to update the internal framework of ixgbe so that perfect filters can be stored and tracked via software. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix flags relating to perfect filters to support coexistenceAlexander Duyck3-41/+30
I am removing the requirement that Ntuple filters have the same number of queues and requirements as ATR. As a result this change will make it so that all the Ntuple flag does is disable ATR for now. This change fixes an issue in which we were incorrectly re-enabling ATR when we exited perfect filter mode. This was due to the fact that the logic assumed RSS and DCB were mutually exclusive which is no longer the case. To correct this we just need to add a check to guarantee DCB is disabled before re-enabling ATR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: remove ntuple filteringAlexander Duyck1-136/+0
Due to numerous issues in ntuple filters it has been decided to move the interface over to the network flow classification interface. As a first step to achieving this I first need to remove the old ntuple interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23bonding: add min links parameter to 802.3adstephen hemminger5-2/+51
This adds support for a configuring the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. See: http://bugzilla.vyatta.com/show_bug.cgi?id=7196 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ip: introduce ip_is_fragment helper inline functionPaul Gortmaker6-6/+6
There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21irda: fix smsc-ircc2 section mismatch warningRandy Dunlap1-1/+1
Fix section mismatch warning: WARNING: drivers/net/irda/smsc-ircc2.o(.devinit.text+0x1a7): Section mismatch in reference from the function smsc_ircc_pnp_probe() to the function .init.text:smsc_ircc_open() Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan24-0/+24
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840Michael Chan1-1/+13
And change iSCSI RQ doorbell size from 16B to 64B to match new firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21mv643xx_eth: enable transmit time stamping.Richard Cochran1-0/+2
This patch enables software (and phy device) transmit time stamping. Compile tested only. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21mv643xx_eth: fix race in trasmit path.Richard Cochran1-2/+4
Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21xen: convert to 64 bit stats interfacestephen hemminger1-5/+64
Convert xen driver to 64 bit statistics interface. Use stats_sync to ensure that 64 bit update is read atomically on 32 bit platform. Put hot statistics into per-cpu table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21vxge: fix 64 bit access on 32 bit platformsstephen hemminger2-40/+59
Need to add stat_sync wrapper around 64 bit statistic values. Fix wraparound bug in lockup detector where it is unsafely comparing 64 bit value that is not atomic. Since only care about detecting activity just looking at current low order bits will work. Remove unused entries in old vxge_sw_stats structure. Change the error counters to unsigned long since they won't grow so large as to have to be 64 bits. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ifb: convert to 64 bit statsstephen hemminger1-9/+47
Convert input functional block device to use 64 bit stats. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21drivers/net: Remove casts of void *Joe Perches41-147/+124
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: Chris Snook <chris.snook@gmail.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ixgbe: setup per CPU PCI pool for FCoE DDPVasu Dev2-36/+82
Currently single PCI pool used across all CPUs and that doesn't scales up as number of CPU increases, so this patch adds per CPU PCI pool to setup udl and that aligns well from FCoE stack as that already has per CPU exch locking. Adds per CPU PCI alloc setup and free in ixgbe_fcoe_ddp_pools_alloc and ixgbe_fcoe_ddp_pools_free, use CPU specific pool during DDP setup. Re-arranged ixgbe_fcoe struct to have fewer holes along with adding pools ptr using pahole. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: add support for Dell CEMEmil Tantilov7-0/+229
This patch adds support for Dell CEM (Comprehensive Embedded Management)). This consists of informing the management firmware of the driver version during probe on 82599 and X540 HW. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB, remove unneeded ixgbe_dcb_txq_to_tc() routineJohn Fastabend1-57/+1
The ixgbe_dcb_txq_to_tc() routine was used to map TX rings to a DCB traffic class. Now that a tx_ring has a DCB traffic class associated with it this routine is no longer needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB and perfect filters can coexistJohn Fastabend1-1/+0
Now flow directors perfect filters features can coexist with DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: fix bit mask for DCB versionJohn Fastabend1-1/+1
This bit mask is wrong DCBX_HOST is always set. It was missed up until now because lldpad reprograms the device on a link event. However this is still wrong and it is best not to be mis-configured for some time immediately following ixgbe_up(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: setup redirection table for multiple packet buffersJohn Fastabend1-1/+5
Setup RSS redirection table to be compatible with multiple packet buffers. Currently, this works on 82599 devices because the RSS redirection index is masked by the number of queues per packet buffer. This sets the cap on the RSS table to maxq. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB 82598 devices, tx_idx and rx_idx swappedJohn Fastabend1-2/+2
The tx_idx and rx_idx values are swapped on 82598 devices with DCB enabled. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: DCB use existing TX and RX queuesJohn Fastabend2-60/+49
The number of TX and RX queues allocated depends on the device type, the current features set, online CPUs, and various compile flags. To enable DCB with multiple queues and allow it to coexist with all the features currently implemented it has to setup a valid queue count. This is done at init time using the FDIR and RSS max queue counts and allowing each TC to allocate a queue per CPU. DCB will now use available queues up to (8 x TCs) this is somewhat arbitrary cap but allows DCB to use up to 64 queues. Its easy to increase this later if that is needed. This is prep work to enable Flow Director with DCB. After this DCB can easily coexist with existing features and no longer needs its own DCB feature ring. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: configure minimal packet buffers to support TCJohn Fastabend3-114/+138
ixgbe devices support different numbers of packet buffers either 8 or 4. Here we only allocate the minimal number of packet buffers required to implement the net_devices number of traffic classes. Fewer traffic classes allows for larger packet buffers in hardware. Also more Tx/Rx queues can be given to each traffic class. This patch is mostly about propagating the number of traffic classes through the init path. Specifically this adds the 4TC cases to the MRQC and MTQC setup routines. Also ixgbe_setup_tc() was sanitized to handle other traffic class value. Finally changing the number of packet buffers in the hardware requires the device to reinit. So this moves the reinit work from DCB into the main ixgbe_setup_tc() routine to consolidate the reset code. Now dcbnl_xxx ops call ixgbe_setup_tc() to configure packet buffers if needed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: consolidate MRQC and MTQC handlingJohn Fastabend2-57/+7
The MRQC and MTQC registers are configured in the main setup path but are also reconfigured in the DCB setup path. The DCB path fixes the DCB configuration by configuring the SECTXMINIFG gap which is required for DCB pause to operate correctly. This patch reduces the duplicate code and does all setup in ixgbe_setup_mtqc() and ixgbe_setup_mrqc(). Additionally, this removes the IXGBE_QDE. This write never set the WRITE bit in the register so the write was not actually doing anything. Also this was to clear the register but, it is never set and defaults to zero. If this is needed for SRIOV it should be added correctly in a follow up patch. But it's never been working so removing it here should be OK. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: consolidate packet buffer allocationJohn Fastabend13-170/+160
Consolidate packet buffer allocation currently being done in the DCB path and main path. This allows the feature set and packet buffer requirements to be done once. This is prep work to allow DCB to coexist with other features namely, flow director. CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbe: dcbnl reduce duplicated code and indentationJohn Fastabend1-26/+23
Replace duplicated code in if/else branches with single check and ixgbe_init_interrupt_scheme(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbevf: remove unnecessary ampersandsStephen Hemminger1-11/+11
Use standard format for net_device_ops (without &) Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Greg Rose <Gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21ixgbevf: Fix bungled declaration of ixgbevf_mbx_opsGreg Rose2-2/+2
In two places storage for mbx_ops is misidentified as type ixgbe_mac_operations. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21igb: convert to ndo_fix_featuresMichał Mirosław2-74/+26
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21e1000: convert to ndo_fix_featuresMichał Mirosław2-73/+26
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - RX csum disabled by default - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-20Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller35-251/+690
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-rxon.c drivers/net/wireless/rtlwifi/pci.c net/netfilter/ipvs/ip_vs_core.c
2011-06-20pxa168_eth: fix race in transmit path.Richard Cochran1-1/+1
Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20gianfar v5: implement nfcSebastian Poehn3-4/+989
This patch adds all missing functionalities for nfc except GRXFH. There is so much code because hardware has not a TCAM. Further hardware rule space is very limited. So I had to extensively use optimization features. Both reasons lead to the necessity to hold all online flows in a linked-list. Change-log: # Some suggestions by Joe Perches applied (thanks!) # Shorted some logs # Use memcmp() for comparing Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20ucc_geth: enable transmit time stamping.Richard Cochran1-0/+2
This patch enables software (and phy device) transmit time stamping. Compile tested only. Cc: Shlomi Gridish <gridish@freescale.com> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20pxa168_eth: enable transmit time stamping.Richard Cochran1-0/+3
This patch enables software (and phy device) transmit time stamping Compile tested only. Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Cc: Mark Brown <markb@marvell.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20smsc911x: enable transmit time stamping.Richard Cochran1-0/+1
This patch enables software (and phy device) transmit time stamping. Compile tested only. Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.