aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-06-25enic: Use receive queue buffer blocks of 32/64 entriesVasanthy Kolluri4-26/+37
Change the receive queue buffer allocations into blocks of 32 entries when ring size is less than 64, otherwise use 64 entries per block. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Add new firmware devcmdsVasanthy Kolluri3-9/+146
Add new firmware devcmds - CMD_PROXY_BY_BDF, CMD_PACKET_FILTER_ALL, CMD_ENABLE_WAIT. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Use (netdev|dev|pr)_<level> macro helpers for loggingVasanthy Kolluri9-109/+98
Replace all printk routines with the (netdev|dev|pr)_<level> macros that provide verbose logs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Clean up: Add wrapper routines for firmware devcmd callsVasanthy Kolluri5-84/+201
Add wrapper routines that issue devcmds to firmware and ensure that a devcmd lock is held for each devcmd call. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Use a lighter reset operation for enic devicesVasanthy Kolluri4-8/+55
The port profile information for a dynamic enic device is set by the upper layers, that are oblivious to the device reset operation. We do not want a reset operation erase the network state of a dynamic enic device as there is no way to set up the port profile information again. Hence a lighter reset operation called hang reset is used. Hang reset, unlike soft reset does not reset the network state and resets the host side state only. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Bug Fix: Change hardware ingress vlan rewrite modeVasanthy Kolluri5-7/+68
The current ingress vlan rewrite mode setting lets the hardware strip off the tag control information of a packet received on native vlan. As a result, the priority bits are also lost. The fix is to change the ingress vlan rewrite mode setting such that the complete tag control information is retained for packets that belong to native vlan. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Feature Add: Replace LRO with GROVasanthy Kolluri3-80/+9
enic now uses the GRO mechanism instead of LRO to pass skbs to upper layers. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Update version to 2.1.3.Michael Chan1-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Further unify kcq handling code.Michael Chan1-37/+34
This eliminates some of the duplicate code for the various devices that require the same basic kcq handling. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Restructure kcq processing.Michael Chan1-54/+22
By doing more work in the common function cnic_get_kcqes(), and making full use of the kcq_info structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Unify kcq allocation for all devices.Michael Chan2-64/+98
By creating a common data stucture kcq_info for all devices, the kcq (kernel completion queue) for all devices can be allocated by common code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Unify IRQ code for all hardware types.Michael Chan1-13/+20
By creating a common cnic_doirq(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Fine-tune CID memory space calculation.Michael Chan2-15/+21
The current code makes assumptions about the CID (context ID) memory space and starting CID that may not be always correct when firmware changes. In particular, BNX2_ISCSI_START_CID may not always be fixed. We now calculate cp->max_cid_space and cp->iscsi_start_cid dynamically instead of using fixed constants. The unused cp->max_iscsi_conn is also eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Record hardware RX hash on each skb where possibleBen Hutchings7-3/+49
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Disable setting feature flags that are not implementedBen Hutchings1-1/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Replace EFX_DRIVER_NAME with KBUILD_MODNAMEBen Hutchings3-5/+3
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Implement message level controlBen Hutchings20-529/+727
Replace EFX_ERR() with netif_err(), EFX_INFO() with netif_info(), EFX_LOG() with netif_dbg() and EFX_TRACE() and EFX_REGDUMP() with netif_vdbg(). Replace EFX_ERR_RL(), EFX_INFO_RL() and EFX_LOG_RL() using explicit calls to net_ratelimit(). Implement the ethtool operations to get and set message level flags, and add a 'debug' module parameter for the initial value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Log MTD errors using partition name, not just net device nameBen Hutchings1-9/+14
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Implement ethtool register dump operationBen Hutchings4-0/+292
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24broadcom: Add 5241 supportDmitry Baryshkov1-0/+22
This patch adds the 5241 PHY ID to the broadcom module. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24broadcom: move all PHY_ID's to headerDmitry Baryshkov1-12/+12
Move all PHY IDs to brcmphy.h header for completeness and unification of code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller18-56/+99
Conflicts: net/ipv4/ip_output.c
2010-06-23sky2: enable rx/tx in sky2_phy_reinit()Brandon Philips1-5/+14
sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: Brandon Philips <bphilips@suse.de> Tested-by: Brandon Philips <bphilips@suse.de> Cc: stable@kernel.org Tested-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: update version to 5.0.6Amit Kumar Salecha1-2/+2
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: mark context state freed after destroyAmit Kumar Salecha2-1/+3
After destroying recv ctx, context state remain same. Fix it by marking as FREED. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: offload tx timeout recoveryAmit Kumar Salecha2-36/+32
Offload tx timeout recovery to fw recovery func(check_health). In check_health, first check health of device, if it its ok, then do tx timeout recovery otherwise device recovery. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: dont free host resources during fw recoveryAmit Kumar Salecha1-29/+3
There is no need to free/alloc host resources during firmware recovery. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: release device resources during interface downAmit Kumar Salecha6-37/+114
Previously we were allocating device resources during probe and release them during remove. Now alloc during interface up and release in interface down. This helps in device performance, as it doesn't need to keep track of inactive resources. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: fix mac address mgmtAmit Kumar Salecha1-3/+8
We first add mac address in driver local list and then send command to fw to add same. There are checks in driver to ensure send command doesn't fail before adding mac address in local list. But instead fix should be: Add mac address in fw and if it succeeds, add it in driver local list. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: handshake with card after fw loadAmit Kumar Salecha3-7/+9
Instead of delaying rcv handshake till interface comes up, do it just after fw load. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: cleanup skb allocationAmit Kumar Salecha3-21/+13
No need to maintian separate state for alloced and freed skb. This can be done by null check. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: disable gig speed when in S0->Sx transitionBruce Allan1-14/+5
Most of this workaround is necessary for all ICHx/PCH parts so one of the two MAC-type checks can be removed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: packet split should not be used with early receiveBruce Allan1-1/+1
Originally it was thought there were issues with ICHx/PCH parts with packet split when jumbo frames were enabled but in fact it is really only when early-receive is enabled (via ERT register) on these parts. Use packet split with jumbos but only when early-receive is not enabled. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: do not touch PHY page 800 registers when link speed is 1000MbpsBruce Allan1-2/+0
The PHY on 82577/82578 has issues when the registers on page 800 are accessed when in gigabit mode. Do not clear the Wakeup Control register when resetting the part since it is on page 800 (and will be cleared on reset anyway). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23e1000e: avoid polling h/w registers during link negotiationBruce Allan3-28/+29
Avoid touching hardware registers when possible, otherwise link negotiation can get messed up when user-level scripts are rapidly polling the driver to see if/when link is up. Use the saved link state information instead when possible. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23cnic: Disable statistics initialization for eth clients that do not support statisticsDmitry Kravkov1-21/+34
Disable statistics initialization for eth clients that do not support statistics. This prevents memory corruption on bnx2x hw. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
2010-06-23net: add dependency on fw class module to qlcnic and netxen_nicAnirban Chakraborty1-0/+2
netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-22Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6David S. Miller1-0/+1
2010-06-22hso: remove setting of low_latency flagFilip Aben1-1/+0
This patch removes the setting of the low_latency flag. tty_flip_buffer_push() is occasionally being called in irq context, which causes a hang if the low_latency flag is set. Removing the low_latency flag only seems to impact the flush to ldisc, which will now be put on a workqueue. Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-21lasi82596: fix netdev_mc_count conversionHelge Deller1-1/+1
Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when appropriate) Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-21NET: MIPSsim: Fix modpost warning.Ralf Baechle1-1/+1
$ make CONFIG_DEBUG_SECTION_MISMATCH=y [...] WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe() The variable mipsnet_driver references the function __init mipsnet_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, [...] Fixed by making mipsnet_probe __devinit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/mipsnet.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-20caif: Use link layer MTU instead of fixed MTUSjur Braendeland1-1/+0
Previously CAIF supported maximum transfer size of ~4050. The transfer size is now calculated dynamically based on the link layers mtu size. Signed-off-by: Sjur Braendeland@stericsson.com Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: update driver version numberBruce Allan1-1/+3
Also separate out an _EXTRAVERSION similar to the core kernel. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: update copyright informationBruce Allan11-12/+12
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: enable support for EEE on 82579Bruce Allan4-1/+70
This patch enables IEEE802.3az (a.k.a. Energy Efficient Ethernet) on the new 82579 LOMs. An optional module parameter is provided to disable the feature if desired. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: initial support for 82579 LOMsBruce Allan7-46/+386
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: fix check for manageability on ICHx/PCHBruce Allan1-4/+27
Do not check for all the bits in E1000_FWSM_MODE_MASK when checking for manageability on 82577/82578; only check if iAMT is enabled. Both of the manageability checks (for 82577/82578 and ICHx) must check the firmware valid bit too since the other bits are only valid when the latter is set. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: separate out PHY statistics register updatesBruce Allan3-47/+126
The 82577/82578 parts have half-duplex statistics in PHY registers. These need only be read when in half-duplex and should all be read at once rather than one at a time to prevent excessive cycles of acquiring/releasing the PHY semaphore. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: cleanup e1000_sw_lcd_config_ich8lan()Bruce Allan1-13/+19
Do not acquire and release the PHY unnecessarily for parts that return from this workaround without actually accessing the PHY registers. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-18e1000e: cleanup ethtool loopback setup codeBruce Allan1-32/+42
Refactor the loopback setup code to first handle the only 10/100 PHY supported by the driver if applicable and then handle the 1Gig PHYs in a switch statement for PHY-specific setups. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.