aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-02r8152: fix typo in register nameKevin Lo1-6/+6
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net: phy: fix race in genphy_update_linkHeiner Kallweit1-0/+6
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02enetc: Select PHYLIB while CONFIG_FSL_ENETC_VF is setYueHaibing1-0/+1
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net/ethernet/qlogic/qed: force the string buffer NULL-terminatedWang Xiayang1-1/+1
strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: usb: pegasus: fix improper read if get_registers() failDenis Kirjanov1-1/+1
get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: samsung: Spelling s/case/cause/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: packetengines: Fix manufacturer spelling and capitalizationGeert Uytterhoeven2-4/+4
Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: nixge: Spelling s/Instrument/Instruments/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: ixp4xx: Spelling s/XSacle/XScale/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: broadcom: Fix manufacturer name in Kconfig help textGeert Uytterhoeven1-3/+3
The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217e9db68d3 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: apple: Fix manufacturer name in Kconfig help textGeert Uytterhoeven1-2/+2
The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b0908176704a ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: amd: Spelling s/case/cause/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: 8390: Fix manufacturer name in Kconfig help textGeert Uytterhoeven1-2/+2
The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b830266ff3 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01mvpp2: fix panic on module removalMatteo Croce1-3/+2
mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: stmmac: Use netif_tx_napi_add() for TX polling functionFrode Isaksen1-2/+3
This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()Jia-Ju Bai1-1/+2
In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: mediatek: Drop unneeded dependency on NET_VENDOR_MEDIATEKGeert Uytterhoeven1-1/+0
The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211David S. Miller1-3/+5
Johannes Berg says: ==================== Just a few fixes: * revert NETIF_F_LLTX usage as it caused problems * avoid warning on WMM parameters from AP that are too short * fix possible null-ptr dereference in hwsim * fix interface combinations with 4-addr and crypto control ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: ag71xx: Use GFP_KERNEL instead of GFP_ATOMIC in 'ag71xx_rings_init()'Christophe JAILLET1-1/+1
There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: ethernet: et131x: Use GFP_KERNEL instead of GFP_ATOMIC when allocating tx_ring->tcb_ringChristophe JAILLET1-1/+1
There is no good reason to use GFP_ATOMIC here. Other memory allocations are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and 'kzalloc()' in 'et131x_rx_dma_memory_alloc()') Use GFP_KERNEL which should be enough. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31mlxsw: spectrum_buffers: Further reduce pool size on Spectrum-2Petr Machata1-2/+2
In commit e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"), pool size was reduced to mitigate a problem in port buffer usage of ports split four ways. It turns out that this work around does not solve the issue, and a further reduction is required. Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the whole number of cells. Fixes: e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31mlxsw: spectrum: Fix error path in mlxsw_sp_module_init()Jiri Pirko1-1/+1
In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: dsa: qca8k: enable port flow controlxiaofeis1-1/+3
Set phy device advertising to enable MAC flow control. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30compat_ioctl: pppoe: fix PPPOEIOCSFWD handlingArnd Bergmann3-0/+19
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30enetc: Fix build error without PHYLIBYueHaibing1-0/+1
If PHYLIB is not set, build enetc will fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c: undefined reference to `phy_disconnect' enetc.c: undefined reference to `phy_start' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c: undefined reference to `phy_stop' enetc.c: undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe': enetc_mdio.c: undefined reference to `mdiobus_alloc_size' enetc_mdio.c: undefined reference to `mdiobus_free' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: stmmac: Sync RX Buffer upon allocationJose Abreu1-3/+10
With recent changes that introduced support for Page Pool in stmmac, Jon reported that NFS boot was no longer working on an ARM64 based platform that had the IP behind an IOMMU. As Page Pool API does not guarantee DMA syncing because of the use of DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon re-allocation because we are always re-using same pages. In fact, ARM64 code invalidates the DMA area upon two situations [1]: - sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE - sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE So, as we must invalidate both the current RX buffer and the newly allocated buffer we propose this fix. [1] arch/arm64/mm/cache.S Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30mlxsw: spectrum_ptp: fix duplicated check on orig_egr_typesColin Ian King1-2/+2
Currently are duplicated checks on orig_egr_types which are redundant, I believe this is a typo and should actually be orig_ing_types || orig_egr_types instead of the expression orig_egr_types || orig_egr_types. Fix these. Addresses-Coverity: ("Same on both sides") Fixes: c6b36bdd04b5 ("mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: dsa: mv88e6xxx: use link-down-define instead of plain valueHubert Feurstein1-1/+1
Using the define here makes the code more expressive. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: phy: fixed_phy: print gpio error only if gpio node is presentHubert Feurstein1-2/+4
It is perfectly ok to not have an gpio attached to the fixed-link node. So the driver should not throw an error message when the gpio is missing. Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: smc911x: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_detect’: drivers/net/ethernet/smsc/smc911x.c:677:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cfg & HW_CFG_EXT_PHY_DET_) { ^ drivers/net/ethernet/smsc/smc911x.c:715:3: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: hamradio: baycom_epp: Mark expected switch fall-throughGustavo A. R. Silva1-1/+2
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/net/hamradio/baycom_epp.c: In function ‘transmit’: drivers/net/hamradio/baycom_epp.c:491:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (i) { ^ drivers/net/hamradio/baycom_epp.c:504:3: note: here default: /* fall through */ ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: wan: sdla: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/net/wan/sdla.c: In function ‘sdla_errors’: drivers/net/wan/sdla.c:414:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cmd == SDLA_INFORMATION_WRITE) ^ drivers/net/wan/sdla.c:417:3: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabledPetr Machata5-17/+82
Spectrum systems have a configurable limit on how far into the packet they parse. By default, the limit is 96 bytes. An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and sequence ID of a PTP event is only available 32 bytes into payload, for a total of 94 bytes. When an additional 802.1q header is present as well (such as when ptp4l is running on a VLAN port), the parsing limit is exceeded. Such packets are not recognized as PTP, and are not timestamped. Therefore generalize the current VXLAN-specific parsing depth setting to allow reference-counted requests from other modules as well. Keep it in the VXLAN module, because the MPRS register also configures UDP destination port number used for VXLAN, and is thus closely tied to the VXLAN code anyway. Then invoke the new interfaces from both VXLAN (in obvious places), as well as from PTP code, when the (global) timestamping configuration changes from disabled to enabled or vice versa. Fixes: 8748642751ed ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: spider_net: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/toshiba/spider_net.c: In function 'spider_net_release_tx_chain': drivers/net/ethernet/toshiba/spider_net.c:783:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!brutal) { ^ drivers/net/ethernet/toshiba/spider_net.c:792:3: note: here case SPIDER_NET_DESCR_RESPONSE_ERROR: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: ehea: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/ibm/ehea/ehea_main.c: In function 'ehea_mem_notifier': include/linux/printk.h:311:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ibm/ehea/ehea_main.c:3253:3: note: in expansion of macro 'pr_info' pr_info("memory offlining canceled"); ^~~~~~~ drivers/net/ethernet/ibm/ehea/ehea_main.c:3256:2: note: here case MEM_ONLINE: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29mvpp2: refactor the HW checksum setupMatteo Croce1-13/+22
The hardware can only offload checksum calculation on first port due to the Tx FIFO size limitation, and has a maximum L3 offset of 128 bytes. Document this in a comment and move duplicated code in a function. Fixes: 576193f2d579 ("net: mvpp2: jumbo frames support") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29mvpp2: refactor MTU change codeMatteo Croce1-28/+13
The MTU change code can call napi_disable() with the device already down, leading to a deadlock. Also, lot of code is duplicated unnecessarily. Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29rocker: fix memory leaks of fib_work on two error return pathsColin Ian King1-0/+2
Currently there are two error return paths that leak memory allocated to fib_work. Fix this by kfree'ing fib_work before returning. Addresses-Coverity: ("Resource leak") Fixes: 19a9d136f198 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway") Fixes: dbcc4fa718ee ("rocker: Fail attempts to use routes with nexthop objects") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29net: stmmac: manage errors returned by of_get_mac_address()Martin Blumenstingl1-0/+7
Commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") added support for reading the MAC address from an nvmem-cell. This required changing the logic to return an error pointer upon failure. If stmmac is loaded before the nvmem provider driver then of_get_mac_address() return an error pointer with -EPROBE_DEFER. Propagate this error so the stmmac driver will be probed again after the nvmem provider driver is loaded. Default to a random generated MAC address in case of any other error, instead of using the error pointer as MAC address. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com20020-isa: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+6
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/arcnet/com20020-isa.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 205:13, 203:10, 209:7, 201:11, 207:8 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: arc-rimi: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/arc-rimi.c: In function 'arcrimi_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/arc-rimi.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/arc-rimi.c:366:2: note: here case 3: /* Node ID */ ^~~~ drivers/net/arcnet/arc-rimi.c:367:8: warning: this statement may fall through [-Wimplicit-fallthrough=] node = ints[3]; ~~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:368:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/arc-rimi.c:369:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:370:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com90io: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90io.c: In function 'com90io_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90io.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90io.c:366:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90io.c:367:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90io.c:368:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29arcnet: com90xx: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90xx.c: In function 'com90xx_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90xx.c:695:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90xx.c:696:2: note: here case 3: /* Mem address */ ^~~~ drivers/net/arcnet/com90xx.c:697:9: warning: this statement may fall through [-Wimplicit-fallthrough=] shmem = ints[3]; ~~~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:698:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90xx.c:699:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:700:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29mac80211_hwsim: Fix possible null-pointer dereferences in hwsim_dump_radio_nl()Jia-Ju Bai1-3/+5
In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is assigned to NULL. Then hdr is used on lines 3622 and 3623: genl_dump_check_consistent(cb, hdr); genlmsg_end(skb, hdr); Thus, possible null-pointer dereferences may occur. To fix these bugs, hdr is used here when it is not NULL. This bug is found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20190729082332.28895-1-baijiaju1990@gmail.com [put braces on all branches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-27r8169: don't use MSI before RTL8168dHeiner Kallweit1-2/+7
It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Reported-by: Dušan Dragić <dragic.dusan@gmail.com> Tested-by: Dušan Dragić <dragic.dusan@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27Revert ("r8169: remove 1000/Half from supported modes")Heiner Kallweit1-4/+1
This reverts commit a6851c613fd7fccc5d1f28d5d8a0cbe9b0f4e8cc. It was reported that RTL8111b successfully finishes 1000/Full autoneg but no data flows. Reverting the original patch fixes the issue. It seems to be a HW issue with the integrated RTL8211B PHY. This PHY version used also e.g. on RTL8168d, so better revert the original patch. Reported-by: Bernhard Held <berny156@gmx.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27net: phylink: Fix flow control for fixed-linkRené van Dorst1-0/+2
In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND with pl->supported, pl->supported is zeroed and only the speed/duplex modes and MII bits are set. So pl->link_config.advertising always loses the flow control/pause bits. By setting Pause and Asym_Pause bits in pl->supported, the flow control work again when devicetree "pause" is set in fixes-link node and the MAC advertise that is supports pause. Results with this patch. Legend: - DT = 'Pause' is set in the fixed-link in devicetree. - validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the validate(). - flow = results reported my link is Up line. +-----+------------+-------+ | DT | validate() | flow | +-----+------------+-------+ | Yes | Yes | rx/tx | | No | Yes | off | | Yes | No | off | +-----+------------+-------+ Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: René van Dorst <opensource@vdorst.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26Merge tag 'mlx5-fixes-2019-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller17-81/+117
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-07-25 This series introduces some fixes to mlx5 driver. 1) Ariel is addressing an issue with enacp flow counter race condition 2) Aya fixes ethtool speed handling 3) Edward fixes modify_cq hw bits alignment 4) Maor fixes RDMA_RX capabilities handling 5) Mark reverses unregister devices order to address an issue with LAG 6) From Tariq, - wrong max num channels indication regression - TLS counters naming and documentation as suggested by Jakub - kTLS, Call WARN_ONCE on netdev mismatch There is one patch in this series that touches nfp driver to align TLS statistics names with latest documentation, Jakub is CC'ed. Please pull and let me know if there is any problem. For -stable v4.9: ('net/mlx5: Use reversed order when unregister devices') For -stable v4.20 ('net/mlx5e: Prevent encap flow counter update async to user query') ('net/mlx5: Fix modify_cq_in alignment') For -stable v5.1 ('net/mlx5e: Fix matching of speed to PRM link modes') For -stable v5.2 ('net/mlx5: Add missing RDMA_RX capabilities') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26net: qualcomm: rmnet: Fix incorrect UL checksum offload logicSubash Abhinov Kasiviswanathan1-4/+9
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets so that the hardware can flip the checksum to 0xFFFF if the computed checksum is 0 per RFC768. However, this bit had to be set for IPv6 UDP non fragmented packets as well per hardware requirements. Otherwise, IPv6 UDP packets with computed checksum as 0 were transmitted by hardware and were dropped in the network. In addition to setting this bit for IPv6 UDP, the field is also appropriately renamed to udp_ind as part of this change. Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26ocelot: Cancel delayed work before wq destructionClaudiu Manoil1-0/+1
Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.