aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08ionic: add SKBTX_IN_PROGRESSShannon Nelson1-0/+1
Set the SKBTX_IN_PROGRESS when offloading the Tx timestamp. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ionic: check for valid tx_mode on SKBTX_HW_TSTAMP xmitShannon Nelson1-1/+1
Make sure the device is in a Tx offload mode before calling the hwstamp offload xmit. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ionic: remove unnecessary compat ifdefShannon Nelson1-2/+0
We don't need to look for HAVE_HWSTAMP_TX_ONESTEP_P2P in the upstream kernel. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ionic: fix up a couple of code style nitsShannon Nelson1-6/+4
Clean up variable declarations. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: change module descriptionMarek Behún1-1/+1
This module supports not only Alaska X, but also Alaska M. Change module description appropriately. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: differentiate 88E2110 vs 88E2111Marek Behún1-0/+62
88E2111 is a variant of 88E2110 which does not support 5 gigabit speeds. Differentiate these variants via the match_phy_device() method, since they have the same PHY ID. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: fix driver name for mv88e2110Marek Behún1-1/+1
The driver name "mv88x2110" should be instead "mv88e2110". Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: add separate structure for 88X3340Marek Behún1-2/+56
The 88X3340 contains 4 cores similar to 88X3310, but there is a difference: it does not support xaui host mode. Instead the corresponding MACTYPE means rxaui / 5gbase-r / 2500base-x / sgmii without AN Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: support other MACTYPEsMarek Behún1-36/+54
Currently the only "changing" MACTYPE we support is when the PHY changes between 10gbase-r / 5gbase-r / 2500base-x / sgmii Add support for usxgmii xaui / 5gbase-r / 2500base-x / sgmii rxaui / 5gbase-r / 2500base-x / sgmii and also 5gbase-r / 2500base-x / sgmii for 88E2110. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: store temperature read method in chip strucutreMarek Behún1-9/+14
Now that we have a chip structure, we can store the temperature reading method in this structure (OOP style). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: check for correct supported interface modeMarek Behún1-7/+30
The 88E2110 does not support xaui nor rxaui modes. Check for correct interface mode for different chips. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: support all rate matching modesMarek Behún1-11/+92
Add support for all rate matching modes for 88X3310 (currently only 10gbase-r is supported, but xaui and rxaui can also be used). Add support for rate matching for 88E2110 (on 88E2110 the MACTYPE register is at a different place). Currently rate matching mode is selected by strapping pins (by setting the MACTYPE register). There is work in progress to enable this driver to deduce the best MACTYPE from the knowledge of which interface modes are supported by the host, but this work is not finished yet. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: add MACTYPE definitions for 88E21xxMarek Behún1-0/+9
Add all MACTYPE definitions for 88E2110, 88E2180, 88E2111 and 88E2181. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: add all MACTYPE definitions for 88X33x0Marek Behún1-5/+13
Add all MACTYPE definitions for 88X3310, 88X3310P, 88X3340 and 88X3340P. In order to have consistent naming, rename MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH to MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: indicate 88X33x0 only port control registersMarek Behún1-7/+7
Rename port control registers to indicate that they are valid only for 88X33x0, not for 88E21x0. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: allow 5gbase-r and usxgmiiMarek Behún1-1/+7
These modes are also supported by these PHYs. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: fix typoMarek Behún1-1/+1
This space should be a tab instead. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: phy: marvell10g: rename registerMarek Behún1-4/+4
The MV_V2_PORT_MAC_TYPE_* is part of the CTRL register. Rename to MV_V2_PORT_CTRL_MACTYPE_*. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08ice: fix memory leak of aRFS after resuming from suspendYongxin Liu1-0/+1
In ice_suspend(), ice_clear_interrupt_scheme() is called, and then irq_free_descs() will be eventually called to free irq and its descriptor. In ice_resume(), ice_init_interrupt_scheme() is called to allocate new irqs. However, in ice_rebuild_arfs(), struct irq_glue and struct cpu_rmap maybe cannot be freed, if the irqs that released in ice_suspend() were reassigned to other devices, which makes irq descriptor's affinity_notify lost. So call ice_free_cpu_rx_rmap() before ice_clear_interrupt_scheme(), which can make sure all irq_glue and cpu_rmap can be correctly released before corresponding irq and descriptor are released. Fix the following memory leak. unreferenced object 0xffff95bd951afc00 (size 512): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 18 00 00 00 18 00 18 00 70 fc 1a 95 bd 95 ff ff ........p....... 00 00 ff ff 01 00 ff ff 02 00 ff ff 03 00 ff ff ................ backtrace: [<0000000072e4b914>] __kmalloc+0x336/0x540 [<0000000054642a87>] alloc_cpu_rmap+0x3b/0xb0 [<00000000f220deec>] ice_set_cpu_rx_rmap+0x6a/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff95bd81b0a2a0 (size 96): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 38 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 8............... b0 a2 b0 81 bd 95 ff ff b0 a2 b0 81 bd 95 ff ff ................ backtrace: [<00000000582dd5c5>] kmem_cache_alloc_trace+0x31f/0x4c0 [<000000002659850d>] irq_cpu_rmap_add+0x25/0xe0 [<00000000495a3055>] ice_set_cpu_rx_rmap+0xb4/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse warning: missing error code 'err'Arkadiusz Kubalewski1-2/+6
Set proper return values inside error checking if-statements. Previously following warning was produced when compiling against sparse. i40e_main.c:15162 i40e_init_recovery_mode() warn: missing error code 'err' Fixes: 4ff0ee1af0169 ("i40e: Introduce recovery mode support") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: 'vsi->netdev' could be nullArkadiusz Kubalewski1-2/+1
Remove vsi->netdev->name from the trace. This is redundant information. With the devinfo trace, the adapter is already identifiable. Previously following error was produced when compiling against sparse. i40e_main.c:2571 i40e_sync_vsi_filters() error: we previously assumed 'vsi->netdev' could be null (see line 2323) Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: uninitialized symbol 'ring'Arkadiusz Kubalewski1-0/+3
Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse errors in i40e_txrx.cArkadiusz Kubalewski1-7/+5
Remove error handling through pointers. Instead use plain int to return value from i40e_run_xdp(...). Previously: - sparse errors were produced during compilation: i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR() - sk_buff* was used to return value, but it has never had valid pointer to sk_buff. Returned value was always int handled as a pointer. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix parameters in aq_get_phy_register()Grzegorz Siwik1-1/+1
Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08mac80211_hwsim: use DEFINE_SPINLOCK() for spinlockGuobin Huang1-6/+2
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1616839160-6654-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08virt_wifi: Return micros for BSS TSF valuesA. Cody Schuffelen1-2/+3
cfg80211_inform_bss expects to receive a TSF value, but is given the time since boot in nanoseconds. TSF values are expected to be at microsecond scale rather than nanosecond scale. Signed-off-by: A. Cody Schuffelen <schuffelen@google.com> Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-07ice: Remove unnecessary blank lineTony Nguyen1-1/+0
Checkpatch reports the following, fix it. ----------------------------------------- drivers/net/ethernet/intel/ice/ice_main.c ----------------------------------------- CHECK:BRACES: Blank lines aren't necessary before a close brace '}' FILE: drivers/net/ethernet/intel/ice/ice_main.c:455: + +} Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-04-07ice: Remove unnecessary checks in add/kill_vid ndo opsBrett Creeley1-12/+0
Currently the driver is doing two unnecessary checks. First both ops are checking if the VLAN ID passed in is less than VLAN_N_VID and second both ops are checking to see if a port VLAN is configured on the VSI. The first check is already handled by the 8021q driver so this is an unnecessary check. The second check is unnecessary because the PF VSI is never put into a port VLAN. Remove these checks. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove rx_gro_dropped statAnirudh Venkataramanan4-6/+1
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use local variable instead of pointer derefsAnirudh Venkataramanan1-15/+12
Replace multiple instances of vsi->back and pi->phy with equivalent local variables Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary variableAnirudh Venkataramanan1-6/+1
In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this and just use pi->hw Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Limit forced overrides based on FW versionJeb Cramer1-12/+2
Beyond a specific version of firmware, there is no need to provide override values to the firmware when setting PHY capabilities. In this case, we do not need to indicate whether we're in Strict or Lenient Link Mode. In the case of translating capabilities to the configuration structure, the module compliance enforcement is already correctly set by firmware, so the extra code block is redundant. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use default configuration mode for PHY configurationAnirudh Venkataramanan6-42/+103
Recent firmware supports a new "get PHY capabilities" mode ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver to track and apply NVM based default link overrides. If FW AQ API version supports it, use Report Default Configuration. Add check function for Report Default Configuration support and update accordingly. Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for clarity. Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Replace some memsets and memcpys with assignmentAnirudh Venkataramanan1-7/+3
In ice_set_link_ksettings, use assignment instead of memset/memcpy where possible Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Fix error return codes in ice_set_link_ksettingsAnirudh Venkataramanan1-7/+7
Return more appropriate error codes so that the right error message is communicated to the user by ethtool. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Rename a couple of variablesAnirudh Venkataramanan1-25/+25
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to 'pi'. This is more consistent with similar usages elsewhere in the driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary checker loopAnirudh Venkataramanan1-9/+1
The loop checking for PF VSI doesn't make any sense. The VSI type backing the netdev passed to ice_set_link_ksettings will always be of type ICE_PF_VSI. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Ignore EMODE return for opcode 0x0605Anirudh Venkataramanan4-38/+59
When link is owned by manageability, the driver is not allowed to fiddle with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so. This patch adds a new function ice_set_link which abstracts the call to ice_aq_set_link_restart_an and provides a clean way to turn on/off link. While making this change, I also spotted that an int variable was being used to hold both an ice_status return code and the Linux errno return code. This pattern more often than not results in the driver inadvertently returning ice_status back to kernel which is a major boo-boo. Clean it up. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Align macro names to the specificationAnirudh Venkataramanan4-23/+24
For get PHY abilities AQ, the specification defines "report modes" as "with media", "without media" and "active configuration". For clarity, rename macros to align with the specification. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Modify recursive way of adding nodesVictor Raj1-53/+77
Remove the recursive way of adding the nodes to the layer in order to reduce the stack usage. Instead the algorithm is modified to use a while loop. The previous code was scanning recursively the nodes horizontally. The total stack consumption will be based on number of nodes present on that layer. In some cases it can consume more stack. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Re-send some AQ commands, as result of EBUSY AQ errorChinh T Cao3-2/+84
Retry sending some AQ commands, as result of EBUSY AQ error. ice_aqc_opc_get_link_topo ice_aqc_opc_lldp_stop ice_aqc_opc_lldp_start ice_aqc_opc_lldp_filter_ctrl This change follows the latest guidelines from HW team. It is better to retry the same AQ command several times, as the result of EBUSY, instead of returning error to the caller right away. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07net: hso: fix null-ptr-deref during tty device unregistrationAnirudh Rayabharam1-21/+12
Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call. Fixes: 72dc1c096c705 ("HSO: add option hso driver") Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Tested-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: fealnx: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: atheros: atl2: use module_pci_driver to simplify the codeWei Yongjun1-23/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: sundance: use module_pci_driver to simplify the codeWei Yongjun1-14/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07tulip: de2104x: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07tulip: windbond-840: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07enic: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: encx24j600: use module_spi_driver to simplify the codeWei Yongjun1-11/+1
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07Merge tag 'wireless-drivers-2021-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller13-55/+97
Kalle Valo says: ==================== wireless-drivers fixes for v5.12 Third, and last, set of fixes for v5.12. Small fixes, iwlwifi having most of them. brcmfmac regression caused by cfg80211 changes is the most important here. iwlwifi * fix a lockdep warning * fix regulatory feature detection in certain firmware versions * new hardware support * fix lockdep warning * mvm: fix beacon protection checks mt76 * mt7921: fix airtime reporting brcmfmac * fix a deadlock regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.