| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid
|
|
As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).
Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.
Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
|
|
When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1. This was
never changed in the driver, so we were checking for the wrong bit in
newer devices. Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
|
|
The driver can match via multiple methods. Its acpi_device_id table is
referenced via ACPI_PTR() so it will be unused for !CONFIG_ACPI builds:
drivers/net/ethernet/smsc/smsc911x.c:2652:36: warning:
‘smsc911x_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Limiting the scope of the variable vector_ring_chain to the block where it
is used.
Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Code to defer the reset(which caps the frequency of the reset) schedules the
timer and returns. Hence, following 'else-if' looks un-necessary.
Fixes: 9de0b86f6444 ("net: hns3: Prevent to request reset frequently")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This removes the left over check and assignment which is no longer used
anywhere in the function and should have been removed as part of the
below mentioned patch.
Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we can specify ifindex on link creation. This change allows
to specify ifindex when a device is moved to another network namespace.
Even now, a device ifindex can be changed if there is another device
with the same ifindex in the target namespace. So this change doesn't
introduce completely new behavior, it adds more control to the process.
CRIU users want to restore containers with pre-created network devices.
A user will provide network devices and instructions where they have to
be restored, then CRIU will restore network namespaces and move devices
into them. The problem is that devices have to be restored with the same
indexes that they have before C/R.
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ++ is confusing. It looks duplicated with the one already performed in
'skb_fill_page_desc()'.
In fact, it is harmless. 'nr_frags' is written twice with the same value.
Once, because of the nr_frags++, and once because of the 'nr_frags = i + 1'
in 'skb_fill_page_desc()'.
So axe this post-increment to avoid confusion.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'page_address(skb_frag_page()) + skb_frag_off()' can be replaced by an
equivalent 'skb_frag_address()' which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to use 'list_for_each_entry_safe' here, as nothing is
removed from the list in the 'for' loop.
Use 'list_for_each_entry' instead, it is slightly less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
X.25 Layer 3 (the Packet Layer) expects layer 2 to provide a reliable
datalink service such that no packets are reordered or dropped. And
X.25 Layer 2 (the LAPB layer) is indeed designed to provide such service.
However, this reliability is not preserved when a driver calls "netif_rx"
to deliver the received packets to layer 3, because "netif_rx" will put
the packets into per-CPU queues before they are delivered to layer 3.
If there are multiple CPUs, the order of the packets may not be preserved.
The per-CPU queues may also drop packets if there are too many.
Therefore, we should not call "netif_rx" to let it queue the packets.
Instead, we should use our own queue that won't reorder or drop packets.
This patch changes all X.25 drivers to use their own queues instead of
calling "netif_rx". The patch also documents this requirement in the
"x25-iface" documentation.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Saeed Mahameed says:
====================
mlx5-updates-2021-04-02
This series provides trivial updates and cleanup to mlx5 driver
1) Support for matching on ct_state inv and rel flag in connection tracking
2) Reject TC rules that redirect from a VF to itself
3) Parav provided some E-Switch cleanups that could be summarized to:
3.1) Packing and Reduce structure sizes
3.2) Dynamic allocation of rate limit tables and structures
4) Vu Makes the netdev arfs and vlan tables allocation dynamic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx5 implementation executes a firmware command on the PF to change
the configuration of the selected VF.
Link: https://lore.kernel.org/linux-pci/20210314124256.70253-5-leon@kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The number of MSI-X vectors is a PCI property visible through lspci. The
field is read-only and configured by the device. The mlx5 devices work in
a static or dynamic assignment mode.
Static assignment means that all newly created VFs have a preset number of
MSI-X vectors determined by device configuration parameters. This can
result in some VFs having too many or too few MSI-X vectors. Till now this
has been the only means of fine-tuning the MSI-X vector count and it was
acceptable for small numbers of VFs.
With dynamic assignment the inefficiency of having a fixed number of MSI-X
vectors can be avoided with each VF having exactly the required
vectors. Userspace will provide this information while provisioning the VF
for use, based on the intended use. For instance if being used with a VM,
the MSI-X vector count might be matched to the CPU count of the VM.
For compatibility mlx5 continues to start up with MSI-X vector assignment,
but the kernel can now access a larger dynamic vector pool and assign more
vectors to created VFs.
Link: https://lore.kernel.org/linux-pci/20210314124256.70253-4-leon@kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This patch adds the support of XDP_REDIRECT to another remote cpu for
further action. It also implements ndo_xdp_xmit ops, enabling the driver
to transmit packets forwarded to it by XDP program running on another
interface.
This patch has been tested using "xdp_redirect_cpu" for XDP_REDIRECT
+ drop testing. It also been tested with "xdp_redirect" sample app
which can be used to exercise ndo_xdp_xmit ops. The burst traffics are
generated using pktgen_sample03_burst_single_flow.sh in samples/pktgen
directory.
v4: Move xdp_do_flush() processing into stmmac_finalize_xdp_rx() and
combined the XDP verdict of XDP TX and REDIRECT together.
v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
for point out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for XDP_TX action which enables XDP program to
transmit back received frames.
This patch has been tested with the "xdp2" app located in samples/bpf
dir. The DUT receives burst traffic packet generated using pktgen script
'pktgen_sample03_burst_single_flow.sh'.
v4: Moved stmmac_tx_timer_arm() to be done once at the end of NAPI RX.
Fixed stmmac_xdp_xmit_back() to return STMMAC_XDP_CONSUMED if
XDP buffer to frame conversion fails. Thanks to Jakub's input.
v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
for pointing out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the initial XDP support to stmmac driver. It supports
XDP_PASS, XDP_DROP and XDP_ABORTED actions. Upcoming patches will add
support for XDP_TX and XDP_REDIRECT.
To support XDP headroom, this patch adds page_offset into RX buffer and
change the dma_sync_single_for_device|cpu(). The DMA address used for
RX operation are changed to take into page_offset too. As page_pool
can handle dma_sync_single_for_device() on behalf of driver with
PP_FLAG_DMA_SYNC_DEV flag, we skip doing that in stmmac driver.
Current stmmac driver supports split header support (SPH) in RX but
the flexibility of splitting header and payload at different position
makes it very complex to be supported for XDP processing. In addition,
jumbo frame is not supported in XDP to keep the initial codes simple.
This patch has been tested with the sample app "xdp1" located in
samples/bpf directory for both SKB and Native (XDP) mode. The burst
traffic generated using pktgen_sample03_burst_single_flow.sh in
samples/pktgen directory.
Changes in v3:
- factor in xdp header and tail adjustment done by XDP program.
Thanks to Jakub Kicinski for pointing out the gap in v2.
Changes in v2:
- fix for "warning: variable 'len' set but not used" reported by lkp.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch organizes TX tail pointer update into a new function called
stmmac_flush_tx_descriptors() so that we can reuse it in stmmac_xmit(),
stmmac_tso_xmit() and up-coming XDP implementation.
Changes to v2:
- Fix for warning: unused variable ‘desc_size’
https://patchwork.hopto.org/static/nipa/457321/12170149/build_32bit/stderr
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SPH functionality splits header and payload according to split mode and
offsef fields (SPLM and SPLOFST). It is beneficials for Linux network
stack RX processing however it adds a lot of complexity in XDP
processing.
So, this patch makes the split-header (SPH) capability of the controller
is stored in "priv->sph_cap" and the enabling/disabling of SPH is decided
by "priv->sph".
This is to prepare initial XDP enabling for stmmac to disable the use of
SPH whenever XDP is enabled.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Certain platform likes Intel mGBE has independent hardware IRQ resources
for TX and RX DMA operation. In preparation to support XDP TX, we add IRQ
affinity hint to group both RX and TX queue of the same queue ID to the
same CPU.
Changes in v2:
- IRQ affinity hint need to set to null before IRQ is released.
Thanks to issue reported by Song, Yoong Siang.
Reported-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dynamic allocate vlan table in mlx5e_priv for EN netdev
when needed. Don't allocate it for representor netdev.
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Dynamic allocate arfs table in mlx5e_priv for EN netdev
when needed. Don't allocate it for representor netdev.
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since there are self loopback prevention mechanisms at the
VF level, offloading such rules which redirect from a VF
to itself in the eswitch will break the datapath since the
packets will be dropped once they go back to the vport they
came from.
Therefore, offloading such rules will be rejected and left to
be handled by SW.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ida_simple_alloc() and remove functions are deprecated.
Related change:
commit 3264ceec8f17 ("lib/idr.c: document that ida_simple_{get,remove}() are deprecated")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Function QoS related fields are already defined in qos related struct.
min and max rate are left out to mlx5_vport_info struct.
Move them to existing qos struct.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Structure mlx5_vport_info consumes 40 bytes of space due to a hole
in it. After packing it reduces to 32 bytes.
Currently:
pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o
struct mlx5_vport_info {
u8 mac[6]; /* 0 6 */
u16 vlan; /* 6 2 */
u8 qos; /* 8 1 */
/* XXX 7 bytes hole, try to pack */
u64 node_guid; /* 16 8 */
int link_state; /* 24 4 */
u32 min_rate; /* 28 4 */
u32 max_rate; /* 32 4 */
bool spoofchk; /* 36 1 */
bool trusted; /* 37 1 */
/* size: 40, cachelines: 1, members: 9 */
/* sum members: 31, holes: 1, sum holes: 7 */
/* padding: 2 */
/* last cacheline: 40 bytes */
};
After packing:
$ pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o
struct mlx5_vport_info {
u8 mac[6]; /* 0 6 */
u16 vlan; /* 6 2 */
u64 node_guid; /* 8 8 */
int link_state; /* 16 4 */
u32 min_rate; /* 20 4 */
u32 max_rate; /* 24 4 */
u8 qos; /* 28 1 */
u8 spoofchk:1; /* 29: 0 1 */
u8 trusted:1; /* 29: 1 1 */
/* size: 32, cachelines: 1, members: 9 */
/* padding: 2 */
/* bit_padding: 6 bits */
/* last cacheline: 32 bytes */
};
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add missing mutex_destroy() to pair with mutex_init().
This should be done only when table is initialized, hence perform
mutex_init() only when table is initialized.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A device supports 128 rate limiters. A static table allocation consumes
8KB of memory even when rate is not configured.
Instead, allocate the table when at least one rate is configured.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Rate limit entry refcount can be incremented uniformly when it is newly
allocated or reused.
So simplify the code to increment refcount at one place.
Use decrement refcount helper in two routines.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
User helper routines to allocate and free rate limit table entries.
Subsequent patch extends use of these helpers to do allocation
during rate entry allocation callback.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Table max_size, min and max rate are constants initialized while table
is created. Reading it doesn't need to hold a table mutex. Hence, read
them without holding table mutex.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix the warning due to missing int.
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned free_count;
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Function QoS related fields are already defined in qos related struct.
min and max rate are left out to mlx5_vport_info struct.
Move them to existing qos struct.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Structure mlx5_vport_info consumes 40 bytes of space due to a hole
in it. After packing it reduces to 32 bytes.
Currently:
pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o
struct mlx5_vport_info {
u8 mac[6]; /* 0 6 */
u16 vlan; /* 6 2 */
u8 qos; /* 8 1 */
/* XXX 7 bytes hole, try to pack */
u64 node_guid; /* 16 8 */
int link_state; /* 24 4 */
u32 min_rate; /* 28 4 */
u32 max_rate; /* 32 4 */
bool spoofchk; /* 36 1 */
bool trusted; /* 37 1 */
/* size: 40, cachelines: 1, members: 9 */
/* sum members: 31, holes: 1, sum holes: 7 */
/* padding: 2 */
/* last cacheline: 40 bytes */
};
After packing:
$ pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o
struct mlx5_vport_info {
u8 mac[6]; /* 0 6 */
u16 vlan; /* 6 2 */
u64 node_guid; /* 8 8 */
int link_state; /* 16 4 */
u32 min_rate; /* 20 4 */
u32 max_rate; /* 24 4 */
u8 qos; /* 28 1 */
u8 spoofchk:1; /* 29: 0 1 */
u8 trusted:1; /* 29: 1 1 */
/* size: 32, cachelines: 1, members: 9 */
/* padding: 2 */
/* bit_padding: 6 bits */
/* last cacheline: 32 bytes */
};
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for matching on ct_state inv and rel flags.
Currently the support is only for match on -inv and -rel.
Matching on +inv and +rel will be rejected.
Example:
$ tc filter add dev ens1f0_0 ingress prio 1 chain 1 proto ip flower \
ct_state -est-rel+trk \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_1 ingress prio 1 chain 1 proto ip flower \
ct_state +trk+est-inv \
action mirred egress redirect dev ens1f0_0
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Restore CMP screener registers on resume path.
Fixes: c1e85c6ce57ef ("net: macb: save/restore the remaining registers and features")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's useful, especially for debugging purposes, to have the Rx copybreak
value changeable at runtime. Export it as an ethtool tunable.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DMA unmapping, allocating a new buffer and DMA mapping it back on the
refill path is really not that efficient. Proper buffer recycling (page
pool, flipping the page and using the other half) cannot be done for
DPAA2 since it's not a ring based controller but it rather deals with
multiple queues which all get their buffers from the same buffer pool on
Rx.
To circumvent these limitations, add support for Rx copybreak. For small
sized packets instead of creating a skb around the buffer in which the
frame was received, allocate a new sk buffer altogether, copy the
contents of the frame and release the initial page back into the buffer
pool.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the dpaa2_eth_xdp_release_buf function into dpaa2_eth_recycle_buf
since in the next patches we'll be using the same recycle mechanism for
the normal stack path beside for XDP_DROP.
Also, rename the array which holds the buffers to be recycled so that it
does not have any reference to XDP.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Let the network stack know we've got support for timestamping
the packets.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the new hwstamp stats to our ethtool stats output.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the get_ts_info() callback for ethtool support of
timestamping information.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Tx and Rx timestamped packets are handled through separate
queues. Here we set them up, service them, and tear them down
along with the normal Tx and Rx queues.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We do hardware timestamping through a separate Tx queue,
and optionally through a separate Rx queue. These queues
are allocated, freed, and tracked separately from the basic
queue arrays.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add handling of the new Rx packet classification filter type.
This simple bit of classification allows for steering packets
to a separate Rx queue for processing.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These are changes to compile and link the new code, but no
new feature support is available or advertised yet.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Matt Chen
Johannes Berg
Luca Coelho
Krzysztof Kozlowski
Salil Mehta
Andrei Vagin
Christophe JAILLET
Xie He
Greg Kroah-Hartman
David S. Miller
Leon Romanovsky
Ong Boon Leong
Vu Pham
Ariel Levkovich
Roi Dayan
Parav Pandit
Claudiu Beznea
Ioana Ciornei
Shannon Nelson