aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-02-09net: hns3: modify some unmacthed types print parameterJiaran Zhang6-9/+9
Fix an issue where the formatting symbol of the formatting input and output function does not match the actual type. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: clean up unnecessary parentheses in macro definitionsYufeng Mo8-18/+18
In macro definitions, parentheses are unnecessary in some cases, such as the calling parameter of a function, the left variable of the equal sign, and so on. So remove these unnecessary parentheses according to these rules. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove the shaper param magic numberPeng Li1-6/+8
To make the code more readable, this patch adds a definition for the magic number 126 used for the default shaper param ir_b, and rename macro DIVISOR_IR_B_126. No functional change. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove redundant client_setup_tc handleJian Shen3-43/+0
Since the real tx queue number and real rx queue number always be updated when netdev opens, it's redundant to call hclge_client_setup_tc to do the same thing. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: clean up some incorrect variable types in hclge_dbg_dump_tm_map()Yonglong Liu1-6/+5
queue_id, qset_id and other IDs are unsigned type, so modify the corresponding local variables' type in hclge_dbg_dump_tm_map() from signed to unsigned. kstrtouint() and the print format should be updated as well. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for index in hclge_get_rss_key()Yufeng Mo1-0/+11
The index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this index before using it in hclge_get_rss_key(). Fixes: a638b1d8cc87 ("net: hns3: fix get VF RSS issue") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()Yufeng Mo1-4/+14
The tqp_index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this tqp_index before using it in hclge_get_ring_chain_from_mbx(). Fixes: 84e095d64ed9 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for queue_id in hclge_reset_vf_queue()Yufeng Mo1-0/+7
The queue_id is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this queue_id before using it in hclge_reset_vf_queue(). Fixes: 1a426f8b40fc ("net: hns3: fix the VF queue reset flow error") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: dsa: felix: implement port flushing on .phylink_mac_link_downVladimir Oltean3-1/+78
There are several issues which may be seen when the link goes down while forwarding traffic, all of which can be attributed to the fact that the port flushing procedure from the reference manual was not closely followed. With flow control enabled on both the ingress port and the egress port, it may happen when a link goes down that Ethernet packets are in flight. In flow control mode, frames are held back and not dropped. When there is enough traffic in flight (example: iperf3 TCP), then the ingress port might enter congestion and never exit that state. This is a problem, because it is the egress port's link that went down, and that has caused the inability of the ingress port to send packets to any other port. This is solved by flushing the egress port's queues when it goes down. There is also a problem when performing stream splitting for IEEE 802.1CB traffic (not yet upstream, but a sort of multicast, basically). There, if one port from the destination ports mask goes down, splitting the stream towards the other destinations will no longer be performed. This can be traced down to this line: ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG); which should have been instead, as per the reference manual: ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA, DEV_MAC_ENA_CFG); Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is the case, but apparently multicasting to several ports will cause issues if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set. I am not sure what the state of the Ocelot VSC7514 driver is, but probably not as bad as Felix/Seville, since VSC7514 uses phylib and has the following in ocelot_adjust_link: if (!phydev->link) return; therefore the port is not really put down when the link is lost, unlike the DSA drivers which use .phylink_mac_link_down for that. Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h which are not exported in include/soc/mscc/ and a bugfix patch should probably not move headers around. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: broadcom: bcm4908enet: add BCM4908 controller driverRafał Miłecki4-0/+781
BCM4908 SoCs family uses Ethernel controller that includes UniMAC but uses different DMA engine (than other controllers) and requires different programming. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: phy: broadcom: remove BCM5482 1000Base-BX supportMichael Walle1-92/+1
It is nowhere used in the kernel. It also seems to be lacking the proper fiber advertise flags. Remove it. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: phy: drop explicit genphy_read_status() opMichael Walle2-2/+0
genphy_read_status() is already the default for the .read_status() op. Drop the unnecessary references. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09brcmfmac: add support for CQM RSSI notificationsAlvin Šipraga3-0/+121
Add support for CQM RSSI measurement reporting and advertise the NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace supplicant such as iwd to be notified of changes in the RSSI for roaming and signal monitoring purposes. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210208125738.3546557-1-alsi@bang-olufsen.dk
2021-02-09wil6210: Add Support for Extended DMG MCS 12.1Max Chen5-19/+52
FW reports Tx/Rx extended MCS 12.1 to driver as "26". Driver will convert this into base MCS 7 + EXTENDED_SC_DMG flag so kernel can do the correct phy rate conversion. Also add log prints to print "12.1" instead of "26" for extended MCS. Signed-off-by: Max Chen <mxchen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1609977050-7089-3-git-send-email-mxchen@codeaurora.org
2021-02-09ath10k: Add new debug level for sta related logsTamizh Chelvam3-12/+13
Add new level ATH10K_DBG_STA debug_mask for printing sta related logs. This will be useful to check the debug logs of connection and changes related to station. Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021 Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612463738-16542-1-git-send-email-tamizhr@codeaurora.org
2021-02-09carl9170: fix struct alignment conflictArnd Bergmann2-11/+11
Multiple structures in the carl9170 driver have alignment impossible alignment constraints that gcc warns about when building with 'make W=1': drivers/net/wireless/ath/carl9170/fwcmd.h:243:2: warning: alignment 1 of 'union <anonymous>' is less than 4 [-Wpacked-not-aligned] drivers/net/wireless/ath/carl9170/wlan.h:373:1: warning: alignment 1 of 'struct ar9170_rx_frame_single' is less than 2 [-Wpacked-not-aligned] In the carl9170_cmd structure, multiple members that have an explicit alignment requirement of four bytes are added into a union with explicit byte alignment, but this in turn is part of a structure that also has four-byte alignment. In the wlan.h header, multiple structures contain a ieee80211_hdr member that is required to be two-byte aligned to avoid alignmnet faults when processing network headers, but all members are forced to be byte-aligned using the __packed tag at the end of the struct definition. In both cases, leaving out the packing does not change the internal layout of the structure but changes the alignment constraint of the structure itself. Change all affected structures to only apply packing where it does not violate the alignment requirement of the contained structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204162926.3262598-1-arnd@kernel.org
2021-02-09wcn36xx: del BA session on TX stopLoic Poulain3-4/+5
Deleting BA session was not correcly performed, causing communication issues with APs that dynamically stop/start new BA sessions. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1611328304-1010-1-git-send-email-loic.poulain@linaro.org
2021-02-09ath11k: Update tx descriptor search index properlyKarthikeyan Periyasamy7-5/+20
Tx descriptor search index field should be updated with hw peer id and not by AST Hash as per the HW/FW recommendation. Incorrect search index causes throughput degradation in all scenario for all the platforms. so updated the search index field with hw peer id, which is a common change applicable for all the platforms. Also no need of these configuration for non station type. seen 10% throughput increase in WDS traffic with this change. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612410960-9120-1-git-send-email-periyasa@codeaurora.org
2021-02-09ath10k: Fix lockdep assertion warning in ath10k_sta_statisticsAnand K Mistry1-0/+2
ath10k_debug_fw_stats_request just be called with conf_mutex held, otherwise the following warning is seen when lock debugging is enabled: WARNING: CPU: 0 PID: 793 at drivers/net/wireless/ath/ath10k/debug.c:357 ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core] Modules linked in: snd_hda_codec_hdmi designware_i2s snd_hda_intel snd_intel_dspcfg snd_hda_codec i2c_piix4 snd_hwdep snd_hda_core acpi_als kfifo_buf industrialio snd_soc_max98357a snd_soc_adau7002 snd_soc_acp_da7219mx98357_mach snd_soc_da7219 acp_audio_dma ccm xt_MASQUERADE fuse ath10k_pci ath10k_core lzo_rle ath lzo_compress mac80211 zram cfg80211 r8152 mii joydev CPU: 0 PID: 793 Comm: wpa_supplicant Tainted: G W 5.10.9 #5 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 RIP: 0010:ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core] Code: 1e bb a1 ff ff ff 4c 89 ef 48 c7 c6 d3 31 2e c0 89 da 31 c0 e8 bd f8 ff ff 89 d8 eb 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 04 ff ff ff 0f 1f 44 00 00 55 48 89 e5 41 56 53 48 89 fb RSP: 0018:ffffb2478099f7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e432700cce0 RCX: 11c85cfd6b8e3b00 RDX: ffff9e432700cce0 RSI: ffff9e43127c5668 RDI: ffff9e4318deddf0 RBP: ffffb2478099f7f8 R08: 0000000000000002 R09: 00000003fd7068cc R10: ffffffffc01b2749 R11: ffffffffc029efaf R12: ffff9e432700c000 R13: ffff9e43127c33e0 R14: ffffb2478099f918 R15: ffff9e43127c33e0 FS: 00007f7ea48e2740(0000) GS:ffff9e432aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000059aa799ddf38 CR3: 0000000118de2000 CR4: 00000000001506f0 Call Trace: ath10k_sta_statistics+0x4d/0x270 [ath10k_core] sta_set_sinfo+0x1be/0xaec [mac80211] ieee80211_get_station+0x58/0x76 [mac80211] rdev_get_station+0xf1/0x11e [cfg80211] nl80211_get_station+0x7f/0x146 [cfg80211] genl_rcv_msg+0x32e/0x35e ? nl80211_stop_ap+0x19/0x19 [cfg80211] ? nl80211_get_station+0x146/0x146 [cfg80211] ? genl_rcv+0x19/0x36 ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x89/0xfb genl_rcv+0x28/0x36 netlink_unicast+0x169/0x23b netlink_sendmsg+0x38a/0x402 sock_sendmsg+0x72/0x76 ____sys_sendmsg+0x153/0x1cc ? copy_msghdr_from_user+0x5d/0x85 ___sys_sendmsg+0x7c/0xb5 ? lock_acquire+0x181/0x23d ? syscall_trace_enter+0x15e/0x160 ? find_held_lock+0x3d/0xb2 ? syscall_trace_enter+0x15e/0x160 ? sched_clock_cpu+0x15/0xc6 __sys_sendmsg+0x62/0x9a do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4913e675630e ("ath10k: enable rx duration report default for wmi tlv") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210202144033.1.I9e556f9fb1110d58c31d04a8a1293995fb8bb678@changeid
2021-02-09ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()Anand K Mistry1-0/+3
The ieee80211_find_sta_by_ifaddr call in ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the RCU read lock. Otherwise, the following warning will be seen when RCU usage checking is enabled: ============================= WARNING: suspicious RCU usage 5.10.3 #8 Tainted: G W ----------------------------- include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by ksoftirqd/1/16. stack backtrace: CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G W 5.10.3 #8 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 Call Trace: dump_stack+0xab/0x115 sta_info_hash_lookup+0x71/0x1e9 [mac80211] ? lock_is_held_type+0xe6/0x12f ? __kasan_kmalloc+0xfb/0x112 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211] ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core] ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core] ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core] ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core] ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core] ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core] ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci] ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core] ? _raw_spin_unlock_irqrestore+0x34/0x61 ? lockdep_hardirqs_on+0x8e/0x12e ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci] net_rx_action+0x11a/0x347 __do_softirq+0x2d3/0x539 run_ksoftirqd+0x4b/0x86 smpboot_thread_fn+0x1d0/0x2ab ? cpu_report_death+0x7f/0x7f kthread+0x189/0x191 ? cpu_report_death+0x7f/0x7f ? kthread_blkcg+0x31/0x31 ret_from_fork+0x22/0x30 Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid
2021-02-08i40e: Log error for oversized MTU on deviceEryk Rybak1-4/+7
When attempting to link XDP prog with MTU larger than supported, user is not informed why XDP linking fails. Adding proper error message: "MTU too large to enable XDP". Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08i40e: consolidate handling of XDP program actionsCristian Dumitrescu1-37/+61
Consolidate the actions performed on the packet based on the XDP program result into a separate function that is easier to read and maintain. Simplify the i40e_construct_skb_zc function, so that the input xdp buffer is always freed, regardless of whether the output skb is successfully created or not. Simplify the behavior of the i40e_clean_rx_irq_zc function, so that the current packet descriptor is dropped when function i40_construct_skb_zc returns an error as opposed to re-processing the same description on the next invocation. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08i40e: remove the redundant buffer info updatesCristian Dumitrescu1-19/+14
For performance reasons, remove the redundant buffer info updates (*bi = NULL). The buffers ready to be cleaned can easily be tracked based on the ring next-to-clean variable, which is consistently updated. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08i40e: remove unnecessary cleaned_count updatesCristian Dumitrescu1-3/+1
For performance reasons, remove the redundant updates of the cleaned_count variable, as its value can be computed based on the ring next-to-clean variable, which is consistently updated. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08i40e: remove unnecessary memory writes of the next to clean pointerCristian Dumitrescu1-19/+11
For performance reasons, avoid writing the ring next-to-clean pointer value back to memory on every update, as it is not really necessary. Instead, simply read it at initialization into a local copy, update the local copy as necessary and write the local copy back to memory after the last update. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08mlxsw: spectrum_router: Set offload_failed flagAmit Cohen1-0/+52
When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and route insertion fails, FIB abort is triggered. After aborting, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08netdevsim: fib: Add debugfs to debug route offload failureAmit Cohen1-2/+112
Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08netdevsim: dev: Initialize FIB module after debugfsIdo Schimmel1-19/+21
Initialize the dummy FIB offload module after debugfs, so that the FIB module could create its own directory there. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08netdevsim: fib: Do not warn if route was not found for several eventsAmit Cohen1-3/+3
The next patch will add the ability to fail route offload controlled by debugfs variable called "fail_route_offload". If we vetoed the addition, we might get a delete or append notification for a route we do not have. Therefore, do not warn if route was not found. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08IPv6: Add "offload failed" indication to routesAmit Cohen2-3/+3
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv6 routes, so that users will have better visibility into the offload process. 'struct fib6_info' is extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase struct size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08IPv4: Add "offload failed" indication to routesAmit Cohen2-0/+3
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias', and 'struct fib_rt_info' are extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase structs size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08RDMA/mlx5: Cleanup the synchronize_srcu() from the ODP flowYishai Hadas1-0/+1
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a very heavy time consumer as part of dereg_mr. For example de-registration of 10000 ODP MRs each with size of 2M hugepage took 19.6 sec comparing de-registration of same number of non ODP MRs that took 172 ms. The new locking scheme uses the wait_event() mechanism which follows the use count of the MR instead of using synchronize_srcu(). By that change, the time required for the above test took 95 ms which is even better than the non ODP flow. Once fully dropped the srcu usage, had to come with a lock to protect the XA access. As part of using the above mechanism we could also clean the num_deferred_work stuff and follow the use count instead. Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08ice: Improve MSI-X fallback logicTony Nguyen1-15/+25
Currently if the driver is unable to get all the MSI-X vectors it wants, it falls back to the minimum configuration which equates to a single Tx/Rx traffic queue pair. Instead of using the minimum configuration, if given more vectors than the minimum, utilize those vectors for additional traffic queues after accounting for other interrupts. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-02-08ice: Fix trivial error messageMitch Williams1-1/+1
This message indicates an error on close, not open. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: remove unnecessary castsBruce Allan4-11/+11
Casting a void * rvalue in an assignment is unnecessary in C; remove the casts. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Refactor DCB related variables out of the ice_port_info structChinh T Cao7-78/+83
Refactor the DCB related variables out of the ice_port_info_struct. The goal is to make the ice_port_info struct cleaner. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Co-developed-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: fix writeback enable logicJesse Brandeburg2-35/+25
The writeback enable logic was incorrectly implemented (due to misunderstanding what the side effects of the implementation would be during polling). Fix this logic issue, while implementing a new feature allowing the user to control the writeback frequency using the knobs for controlling interrupt throttling that we already have. Basically if you leave adaptive interrupts enabled, the writeback frequency will be varied even if busy_polling or if napi-poll is in use. If the interrupt rates are set to a fixed value by ethtool -C and adaptive is off, the driver will allow the user-set interrupt rate to guide how frequently the hardware will complete descriptors to the driver. Effectively the user will get a control over the hardware efficiency, allowing the choice between immediate interrupts or delayed up to a maximum of the interrupt rate, even when interrupts are disabled during polling. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Use PSM clock frequency to calculate RL profilesBen Shelton5-9/+63
The core clock frequency is currently hardcoded at 446 MHz for the RL profile calculations. This causes issues since not all devices use that clock frequency. Read the GLGEN_CLKSTAT_SRC register to determine which PSM clock frequency is selected. This ensures that the rate limiter profile calculations will be correct. Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: create scheduler aggregator node config and move VSIsKiran Patil9-20/+1207
Create set scheduler aggregator node and move for VSIs into respective scheduler node. Max children per aggregator node is 64. There are two types of aggregator node(s) created. 1. dedicated node for PF and _CTRL VSIs 2. dedicated node(s) for VFs. As part of reset and rebuild, aggregator nodes are recreated and VSIs are moved to respective aggregator node. Having related VSIs in respective tree avoid starvation between PF and VF w.r.t Tx bandwidth. Co-developed-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Tarun Singh <tarun.k.singh@intel.com> Co-developed-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Victor Raj <victor.raj@intel.com> Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Add initial support framework for LAGDave Ertman7-0/+570
Add the framework and initial implementation for receiving and processing netdev bonding events. This is only the software support and the implementation of the HW offload for bonding support will be coming at a later time. There are some architectural gaps that need to be closed before that happens. Because this is a software only solution that supports in kernel bonding, SR-IOV is not supported with this implementation. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Remove xsk_buff_pool from VSI structureMichal Swiatkowski3-79/+30
Current implementation of netdev already contains xsk_buff_pools. We no longer have to contain these structures in ice_vsi. Refactor the code to operate on netdev-provided xsk_buff_pools. Move scheduling napi on each queue to a separate function to simplify setup function. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: implement new LLDP filter commandDave Ertman6-8/+82
There is an issue with some NVMs where an already existent LLDP filter is blocking the creation of a filter to allow LLDP packets to be redirected to the default VSI for the interface. This is blocking all LLDP functionality based in the kernel when the FW LLDP agent is disabled (e.g. software based DCBx). Implement the new AQ command to allow adding VSI destinations to existent filters on NVM versions that support the new command. The new lldp_fltr_ctrl AQ command supports Rx filters only, so the code flow for adding filters to disable Tx of control frames will remain intact. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: log message when trusted VF goes in/out of promisc modeBrett Creeley1-13/+19
Currently there is no message printed on the host when a VF goes in and out of promiscuous mode. This is causing confusion because this is the expected behavior based on i40e. Fix this. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08Merge tag 'mlx5-updates-2021-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller24-1056/+3782
mlx5-updates-2021-02-04 Vlad Buslov says: ================= Implement support for VF tunneling Abstract Currently, mlx5 only supports configuration with tunnel endpoint IP address on uplink representor. Remove implicit and explicit assumptions of tunnel always being terminated on uplink and implement necessary infrastructure for configuring tunnels on VF representors and updating rules on such tunnels according to routing changes. SW TC model From TC perspective VF tunnel configuration requires two rules in both directions: TX rules 1. Rule that redirects packets from UL to VF rep that has the tunnel endpoint IP address: $ tc -s filter show dev enp8s0f0 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 16:c9:a0:2d:69:2c src_mac 0c:42:a1:58:ab:e4 eth_type ipv4 ip_flags nofrag in_hw in_hw_count 1 action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen index 3 ref 1 bind 1 installed 377 sec used 0 sec Action statistics: Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 114096 bytes 952 pkt backlog 0b 0p requeues 0 cookie 878fa48d8c423fc08c3b6ca599b50a97 no_percpu used_hw_stats delayed 2. Rule that decapsulates the tunneled flow and redirects to destination VF representor: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed RX rules 1. Rule that encapsulates the tunneled flow and redirects packets from source VF rep to tunnel device: $ tc -s filter show dev enp8s0f0_1 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac 0a:40:bd:30:89:99 src_mac ca:2e:a7:3f:f5:0f eth_type ipv4 ip_tos 0/0x3 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key set src_ip 7.7.7.5 dst_ip 7.7.7.1 key_id 98 dst_port 4789 nocsum ttl 64 pipe index 1 ref 1 bind 1 installed 411 sec used 411 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 no_percpu used_hw_stats delayed action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen index 1 ref 1 bind 1 installed 411 sec used 0 sec Action statistics: Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 5615833 bytes 4028 pkt backlog 0b 0p requeues 0 cookie bb406d45d343bf7ade9690ae80c7cba4 no_percpu used_hw_stats delayed 2. Rule that redirects from tunnel device to UL rep: $ tc -s filter show dev vxlan_sys_4789 ingress filter protocol ip pref 4 flower chain 0 filter protocol ip pref 4 flower chain 0 handle 0x1 dst_mac ca:2e:a7:3f:f5:0f src_mac 0a:40:bd:30:89:99 eth_type ipv4 enc_dst_ip 7.7.7.5 enc_src_ip 7.7.7.1 enc_key_id 98 enc_dst_port 4789 enc_tos 0 ip_flags nofrag in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 installed 434 sec used 434 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen index 4 ref 1 bind 1 installed 434 sec used 0 sec Action statistics: Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 129936 bytes 1082 pkt backlog 0b 0p requeues 0 cookie ac17cf398c4c69e4a5b2f7aabd1b88ff no_percpu used_hw_stats delayed HW offloads model For hardware offload the goal is to mach packet on both rules without exposing it to software on tunnel endpoint VF. In order to achieve this for tx, TC implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification rule to overwrite packet source port to the value of tunnel VF. Eswitch code is modified to recirculate such packets after source port value is changed, which allows second tx rules to match. For rx path indirect table infrastructure is used to allow fully processing VF tunnel traffic in hardware. To implement such pipeline driver needs to program the hardware after matching on UL rule to overwrite source vport from UL to tunnel VF and recirculate the packet to the root table to allow matching on the rule installed on tunnel VF. For this, indirect table matches all encapsulated traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by the miss rule. Such configuration will cause packet to appear on VF representor instead of VF itself if packet has been matches by indirect table rule based on tunnel parameters but missed on second rule (after recirculation). Handle such case by marking packets processed by indirect table with special 0xFFF value in reg_c1 and extending slow table with additional flow group that matches on reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF mark). When creating offloads fdb tables, install one rule per VF vport to match on recirculated miss packets and redirect them to appropriate VF vport. Routing events In order to support routing changes and migration of tunnel device between different endpoint VFs, implement routing infrastructure and update it with FIB events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel rule is attached to a routing entry, which is shared for rules of same tunnel. On FIB event the work is scheduled to delete/recreate all rules of affected tunnel. Note: only vxlan tunnel type is supported by this series. =================
2021-02-08cxgb4: remove unused vpd_cap_addrHeiner Kallweit2-3/+0
It is likely that this is a leftover from T3 driver heritage. cxgb4 uses the PCI core VPD access code that handles detection of VPD capabilities. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08Merge tag 'mt76-for-kvalo-2021-01-29' of https://github.com/nbd168/wirelessKalle Valo75-3199/+12008
mt76 patches for 5.12 * add new mt7921e driver * factor out common code shared between 7615/7663 and 7921 * performance optimizations * 7915 dbdc fixes * 802.11 encap offload support * support for multiple pcie gen1 host interfaces on 7915 * 7915 testmode support * bugfixes * testmode support enhancements * endian fixes * 7915 txbf support
2021-02-08Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-nextKalle Valo40-738/+1389
iwlwifi patches intended for v5.12 * Check FW notification sizes for robustness; * Improvements in the NAPI implementation; * Implement a workaround for CCA-EXT; * Add new FW API support; * Fix a CSA bug; * Implement PHY integration version parsing; * A bit of refactoring; * One more CSA bug fix, this time in the AP side; * Support for new So devices and a bit of reorg; * Per Platform Antenna Gain (PPAG) fixes and improvements; * Improvements in the debug framework; * Some other clean-ups and small fixes. # gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2021-02-08mwl8k: fix alignment constraintsArnd Bergmann1-1/+1
sturct mwl8k_dma_data contains a ieee80211_hdr structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: vers/net/wireless/marvell/mwl8k.c:811:1: warning: alignment 1 of 'struct mwl8k_dma_data' is less than 2 [-Wpacked-not-aligned] Mark mwl8k_dma_data itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204162813.3159319-1-arnd@kernel.org
2021-02-08wl3501: fix alignment constraintsArnd Bergmann1-1/+1
struct wl3501_80211_tx_hdr contains a ieee80211_hdr structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: wireless/wl3501.h:553:1: warning: alignment 1 of 'struct wl3501_80211_tx_hdr' is less than 2 [-Wpacked-not-aligned] Mark wl3501_80211_tx_hdr itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204162653.3113749-1-arnd@kernel.org
2021-02-08rt2800usb: add Sweex LW163V2 id'sStanislaw Gruszka1-0/+1
Add support for Sweex LW163V2 device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204101902.199590-1-stf_xl@wp.pl
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.