aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi1-1/+1
The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
2021-01-25iwlwifi: queue: bail out on invalid freeingJohannes Berg1-4/+2
If we find an entry without an SKB, we currently continue, but that will just result in an infinite loop since we won't increment the read pointer, and will try the same thing over and over again. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
2021-01-25iwlwifi: mvm: guard against device removal in reprobeJohannes Berg1-1/+2
If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
2021-01-25iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.Matti Gottlieb1-2/+2
The bit that indicates if the device supports 160MHZ is bit #9. The macro checks bit #8. Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
2021-01-25iwlwifi: mvm: clear IN_D3 after wowlan status cmdShaul Triebitz1-3/+3
In D3 resume flow, avoid the following race where sending packets before updating the sequence number (sequence number received from the wowlan status command response): Thread 1: __iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut by thread 2 before reaching iwl_mvm_query_wakeup_reasons. Thread 2: iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number. Thread 1: __iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons updating the sequence number received from the firmware. The next packet that will be sent now will cause sysassert 0x1096. Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after sending the wowlan status command and updating the sequence number. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
2021-01-25iwlwifi: pcie: add rules to match Qu with Hr2Luca Coelho3-0/+38
Until now we have been relying on matching the PCI ID and subsystem device ID in order to recognize Qu devices with Hr2. Add rules to match these devices, so that we don't have to add a new rule for every new ID we get. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
2021-01-25iwlwifi: mvm: invalidate IDs of internal stations at mvm startGregory Greenman2-0/+10
Having sta_id not set for aux_sta and snif_sta can potentially lead to a hard to debug issue in case remove station is called without an add. In this case sta_id 0, an unrelated regular station, will be removed. In fact, we do have a FW assert that occures rarely and from the debug data analysis it looks like sta_id 0 is removed by mistake, though it's hard to pinpoint the exact flow. The WARN_ON in this patch should help to find it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
2021-01-25iwlwifi: mvm: fix the return type for DSM functions 1 and 2Matt Chen3-29/+68
The return type value of functions 1 and 2 were considered to be an integer inside a buffer, but they can also be only an integer, without the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a single integer value, as well as packed inside a buffer. Signed-off-by: Matt Chen <matt.chen@intel.com> Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
2021-01-25iwlwifi: pcie: reschedule in long-running memory readsJohannes Berg1-1/+7
If we spin for a long time in memory reads that (for some reason in hardware) take a long time, then we'll eventually get messages such as watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272] This is because the reading really does take a very long time, and we don't schedule, so we're hogging the CPU with this task, at least if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y. Previously I misinterpreted the situation and thought that this was only going to happen if we had interrupts disabled, and then fixed this (which is good anyway, however), but that didn't always help; looking at it again now I realized that the spin unlock will only reschedule if CONFIG_PREEMPT is used. In order to avoid this issue, change the code to cond_resched() if we've been spinning for too long here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
2021-01-25iwlwifi: pcie: use jiffies for memory read spin time limitJohannes Berg1-6/+2
There's no reason to use ktime_get() since we don't need any better precision than jiffies, and since we no longer disable interrupts around this code (when grabbing NIC access), jiffies will work fine. Use jiffies instead of ktime_get(). This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule in long-running memory reads". The code gets simpler with the weird clock use etc. removed before we add cond_resched(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
2021-01-25iwlwifi: pcie: fix context info memory leakJohannes Berg1-2/+9
If the image loader allocation fails, we leak all the previously allocated memory. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
2021-01-25iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmapEmmanuel Grumbach1-0/+5
I hit a NULL pointer exception in this function when the init flow went really bad. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
2021-01-25iwlwifi: pcie: set LTR on more devicesJohannes Berg2-17/+28
To avoid completion timeouts during device boot, set up the LTR timeouts on more devices - similar to what we had before for AX210. This also corrects the AX210 workaround to be done only on discrete (non-integrated) devices, otherwise the registers have no effect. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
2021-01-25iwlwifi: queue: don't crash if txq->entries is NULLEmmanuel Grumbach1-25/+24
The code was really awkward, we would first dereference txq->entries when calling iwl_txq_genX_tfd_unmap and then we would check that txq->entries is non-NULL. Fix that by exiting if txq->entries is NULL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
2021-01-25iwlwifi: fix the NMI flow for old devicesEmmanuel Grumbach2-6/+13
I noticed that the flow that triggers an NMI on the firmware for old devices (tested on 7265) doesn't work. Apparently, the firmware / device is still in low power when we write the register that triggers the NMI. We call the "grab_nic_access" function to make sure the device is awake but that wasn't enough. I played with this and noticed that if we wait 1 ms after the device reports it is awake before we write to the NMI register, the device always sees our write and the firmware gets properly asserted. Triggering an NMI to the firmware can be done with the debugfs hook: echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi What happened before is that the firmware would just stall without running its NMI routine. Because of that the driver wouldn't get the "firmware crashed" interrupt. After a while the driver would notice that the firmware is not responding to some command and it would read the error data from the firmware, but this data is populated in the NMI service routine in the firmware which was not called. So in the logs it looked like: iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms. iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00000000 | branchlink2 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000000 | data2 iwlwifi 0000:00:03.0: 0x00000000 | data3 iwlwifi 0000:00:03.0: 0x00000000 | beacon time iwlwifi 0000:00:03.0: 0x00000000 | tsf low ... With this fix, immediately after we trigger the NMI to the firmware, we get the expected: iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000. iwlwifi 0000:00:03.0: Start IWL Error Log Dump: iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2 iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1 iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000080 | data2 iwlwifi 0000:00:03.0: 0x07030000 | data3 iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low iwlwifi 0000:00:03.0: 0x00000000 | tsf hi iwlwifi 0000:00:03.0: 0x00000000 | time gp1 iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2 iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type iwlwifi 0000:00:03.0: 0x0000001D | uCode version major Notice the first line: "Microcode SW error detected:" which is printed in the driver's ISR, which means that the driver actually got an interrupt from the firmware saying that it crashed. And then we have the properly populated error data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
2021-01-25iwlwifi: pnvm: don't try to load after failuresJohannes Berg1-1/+7
If loading the PNVM file failed on the first try during the interface up, the file is unlikely to show up later, and we already don't try to reload it if it changes, so just don't try loading it again and again. This also fixes some issues where we may try to load it at resume time, which may not be possible yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
2021-01-25iwlwifi: pnvm: don't skip everything when not reloadingJohannes Berg1-22/+22
Even if we don't reload the file from disk, we still need to trigger the PNVM load flow with the device; fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
2021-01-25iwlwifi: pcie: avoid potential PNVM leaksJohannes Berg1-0/+3
If we erroneously try to set the PNVM data again after it has already been set, we could leak the old DMA memory. Avoid that and warn, we shouldn't be doing this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
2021-01-25iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg1-0/+3
We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
2021-01-25iwlwifi: mvm: skip power command when unbinding vif during CSASara Sharon1-0/+3
In the new CSA flow, we remain associated during CSA, but still do a unbind-bind to the vif. However, sending the power command right after when vif is unbound but still associated causes FW to assert (0x3400) since it cannot tell the LMAC id. Just skip this command, we will send it again in a bit, when assigning the new context. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
2021-01-25Merge 5.11-rc5 into tty-nextGreg Kroah-Hartman113-557/+977
We need the fixes in here and this resolves a merge issue in drivers/tty/tty_io.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23net: dsa: hellcreek: Add TAPRIO offloading supportKurt Kanzenbach2-2/+318
The switch has support for the 802.1Qbv Time Aware Shaper (TAS). Traffic schedules may be configured individually on each front port. Each port has eight egress queues. The traffic is mapped to a traffic class respectively via the PCP field of a VLAN tagged frame. The TAPRIO Qdisc already implements that. Therefore, this interface can simply be reused. Add .port_setup_tc() accordingly. The activation of a schedule on a port is split into two parts: * Programming the necessary gate control list (GCL) * Setup delayed work for starting the schedule The hardware supports starting a schedule up to eight seconds in the future. The TAPRIO interface provides an absolute base time. Therefore, periodic delayed work is leveraged to check whether a schedule may be started or not. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mhi: Set wwan device typeLoic Poulain1-0/+5
The 'wwan' devtype is meant for devices that require additional configuration to be used, like WWAN specific APN setup over AT/QMI commands, rmnet link creation, etc. This is the case for MHI (Modem host Interface) netdev which targets modem/WWAN endpoints. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1611328554-1414-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mvpp2: Remove unneeded Kconfig dependency.Richard Cochran1-1/+0
The mvpp2 is an Ethernet driver, and it implements MAC style time stamping of PTP frames. It has no need of the expensive option to enable PHY time stamping. Remove the incorrect dependency. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: mv88e6xxx: Remove bogus Kconfig dependency.Richard Cochran1-1/+0
The mv88e6xxx is a DSA driver, and it implements DSA style time stamping of PTP frames. It has no need of the expensive option to enable PHY time stamping. Remove the bogus dependency. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23chtls: Fix potential resource leakPan Bian1-4/+3
The dst entry should be released if no neighbour is found. Goto label free_dst to fix the issue. Besides, the check of ndev against NULL is redundant. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: bcm_sf2: put device node before returnPan Bian1-2/+6
Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: disable IEOB interrupts before clearingAlex Elder1-1/+1
Currently in gsi_isr_ieob(), event ring IEOB interrupts are disabled one at a time. The loop disables the IEOB interrupt for all event rings represented in the event mask. Instead, just disable them all at once. Disable them all *before* clearing the interrupt condition. This guarantees we'll schedule NAPI for each event once, before another IEOB interrupt could be signaled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: repurpose gsi_irq_ieob_disable()Alex Elder1-7/+12
Rename gsi_irq_ieob_disable() to be gsi_irq_ieob_disable_one(). Introduce a new function gsi_irq_ieob_disable() that takes a mask of events to disable rather than a single event id. This will be used in the next patch. Rename gsi_irq_ieob_enable() to be gsi_irq_ieob_enable_one() to be consistent. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: have gsi_channel_update() return a valueAlex Elder1-7/+6
Have gsi_channel_update() return the first transaction in the updated completed transaction list, or NULL if no new transactions have been added. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: heed napi_complete() return valueAlex Elder1-3/+1
Pay attention to the return value of napi_complete(), completing polling only if it returns true. Just use napi rather than &channel->napi as the argument passed to napi_complete(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: ipa: count actual work done in gsi_channel_poll()Alex Elder1-3/+2
There is an off-by-one problem in gsi_channel_poll(). The count of transactions completed is incremented each time through the loop *before* determining whether there is any more work to do. As a result, if we exit the loop early the counter its value is one more than the number of transactions actually processed. Instead, increment the count after processing, to ensure it reflects the number of processed transactions. The result is more naturally described as a for loop rather than a while loop, so change that. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22mlxsw: Register physical ports as a devlink resourceDanielle Ratson3-11/+73
The switch ASIC has a limited capacity of physical ('flavour physical' in devlink terminology) ports that it can support. While each system is brought up with a different number of ports, this number can be increased via splitting up to the ASIC's limit. Expose physical ports as a devlink resource so that user space will have visibility to the maximum number of ports that can be supported and the current occupancy. In addition, add a "Generic Resources" section in devlink-resource documentation so the different drivers will be aligned by the same resource name when exposing to user space. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net/mlx5e: Support HTB offloadMaxim Mikityanskiy14-46/+1506
This commit adds support for HTB offload in the mlx5e driver. Performance: NIC: Mellanox ConnectX-6 Dx CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz (24 cores with HT) 100 Gbit/s line rate, 500 UDP streams @ ~200 Mbit/s each 48 traffic classes, flower used for steering No shaping (rate limits set to 4 Gbit/s per TC) - checking for max throughput. Baseline: 98.7 Gbps, 8.25 Mpps HTB: 6.7 Gbps, 0.56 Mpps HTB offload: 95.6 Gbps, 8.00 Mpps Limitations: 1. 256 leaf nodes, 3 levels of depth. 2. Granularity for ceil is 1 Mbit/s. Rates are converted to weights, and the bandwidth is split among the siblings according to these weights. Other parameters for classes are not supported. Ethtool statistics support for QoS SQs are also added. The counters are called qos_txN_*, where N is the QoS queue number (starting from 0, the numeration is separate from the normal SQs), and * is the counter name (the counters are the same as for the normal SQs). Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: hns3: replace skb->csum_not_inet with skb_csum_is_sctpXin Long1-1/+1
Commit fa8211701043 ("net: add inline function skb_csum_is_sctp") missed replacing skb->csum_not_inet check in hns3. This patch is to replace it with skb_csum_is_sctp(). Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/3ad3c22c08beb0947f5978e790bd98d2aa063df9.1611307861.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22sfc: reduce the number of requested xdp ev queuesIvan Babrou1-2/+4
Without this change the driver tries to allocate too many queues, breaching the number of available msi-x interrupts on machines with many logical cpus and default adapter settings: Insufficient resources for 12 XDP event queues (24 other channels, max 32) Which in turn triggers EINVAL on XDP processing: sfc 0000:86:00.0 ext0: XDP TX failed (-22) Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20210120212759.81548-1-ivan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: fec: put child node on error pathPan Bian1-1/+2
Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: stmmac: dwmac-intel-plat: remove config data on errorPan Bian1-2/+2
Remove the config data when rate setting fails. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: phy: realtek: Add support for RTL9000AA/ANYuusuke Ashizuka1-0/+132
RTL9000AA/AN as 100BASE-T1 is following: - 100 Mbps - Full duplex - Link Status Change Interrupt - Master/Slave configuration Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com> Signed-off-by: Torii Kenichi <torii.ken1@fujitsu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210121080254.21286-1-ashiduka@fujitsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: octeontx2: Make sure the buffer is 128 byte alignedKevin Hao1-1/+2
The octeontx2 hardware needs the buffer to be 128 byte aligned. But in the current implementation of napi_alloc_frag(), it can't guarantee the return address is 128 byte aligned even the request size is a multiple of 128 bytes, so we have to request an extra 128 bytes and use the PTR_ALIGN() to make sure that the buffer is aligned correctly. Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers") Reported-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli1-0/+1
Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net/mlx5: SF, Port function state change supportParav Pandit7-27/+431
Support changing the state of the SF port's function through devlink. When activating the SF port's function, enable the hca in the device followed by adding its auxiliary device. When deactivating the SF port's function, delete its auxiliary device followed by disabling the vHCA. Port function attributes get/set callbacks are invoked with devlink instance lock held. Such callbacks need to synchronize with sf port table getting disabled either via sriov sysfs callback. Such callbacks synchronize with table disable context holding table refcount. $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show ens2f0npf0sf88 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:88:88 state inactive opstate detached $ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active $ devlink port show ens2f0npf0sf88 -jp { "port": { "pci/0000:06:00.0/32768": { "type": "eth", "netdev": "ens2f0npf0sf88", "flavour": "pcisf", "controller": 0, "pfnum": 0, "sfnum": 88, "external": false, "splittable": false, "function": { "hw_addr": "00:00:00:00:88:88", "state": "active", "opstate": "attached" } } } } On port function activation, an auxiliary device is created in below example. $ devlink dev show devlink dev show auxiliary/mlx5_core.sf.4 $ devlink port show auxiliary/mlx5_core.sf.4/1 auxiliary/mlx5_core.sf.4/1: type eth netdev p0sf88 flavour virtual port 0 splittable false Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: SF, Add port add delete functionalityParav Pandit12-0/+601
To handle SF port management outside of the eswitch as independent software layer, introduce eswitch notifier APIs so that mlx5 upper layer who wish to support sf port management in switchdev mode can perform its task whenever eswitch mode is set to switchdev or before eswitch is disabled. Initialize sf port table on such eswitch event. Add SF port add and delete functionality in switchdev mode. Destroy all SF ports when eswitch is disabled. Expose SF port add and delete to user via devlink commands. $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show ens2f0npf0sf88 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached or by its unique port index: $ devlink port show pci/0000:06:00.0/32768 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show ens2f0npf0sf88 -jp { "port": { "pci/0000:06:00.0/32768": { "type": "eth", "netdev": "ens2f0npf0sf88", "flavour": "pcisf", "controller": 0, "pfnum": 0, "sfnum": 88, "external": false, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00", "state": "inactive", "opstate": "detached" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: E-switch, Add eswitch helpers for SF vportParav Pandit4-8/+97
Add helpers to enable/disable eswitch port, register its devlink port and load its representor. Signed-off-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: E-switch, Prepare eswitch to handle SF vportVu Pham5-4/+73
Prepare eswitch to handle SF vport during (a) querying eswitch functions (b) egress ACL creation (c) account for SF vports in total vports calculation Assign a dedicated placeholder for SFs vports and their representors. They are placed after VFs vports and before ECPF vports as below: [PF,VF0,...,VFn,SF0,...SFm,ECPF,UPLINK]. Change functions to map SF's vport numbers to indices when accessing the vports or representors arrays, and vice versa. Signed-off-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: SF, Add auxiliary device driverParav Pandit9-5/+184
Add auxiliary device driver for mlx5 subfunction auxiliary device. A mlx5 subfunction is similar to PCI PF and VF. For a subfunction an auxiliary device is created. As a result, when mlx5 SF auxiliary device binds to the driver, its netdev and rdma device are created, they appear as $ ls -l /sys/bus/auxiliary/devices/ mlx5_core.sf.4 -> ../../../devices/pci0000:00/0000:00:03.0/0000:06:00.0/mlx5_core.sf.4 $ ls -l /sys/class/net/eth1/device /sys/class/net/eth1/device -> ../../../mlx5_core.sf.4 $ cat /sys/bus/auxiliary/devices/mlx5_core.sf.4/sfnum 88 $ devlink dev show pci/0000:06:00.0 auxiliary/mlx5_core.sf.4 $ devlink port show auxiliary/mlx5_core.sf.4/1 auxiliary/mlx5_core.sf.4/1: type eth netdev p0sf88 flavour virtual port 0 splittable false $ rdma link show mlx5_0/1 link mlx5_0/1 state ACTIVE physical_state LINK_UP netdev p0sf88 $ rdma dev show 8: rocep6s0f1: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d113 sys_image_guid 248a:0703:00b3:d112 13: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112 In future, devlink device instance name will adapt to have sfnum annotation using either an alias or as devlink instance name described in RFC [1]. [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: SF, Add auxiliary device supportParav Pandit4-1/+305
Introduce API to add and delete an auxiliary device for an SF. Each SF has its own dedicated window in the PCI BAR 2. SF device is similar to PCI PF and VF that supports multiple class of devices such as net, rdma and vdpa. SF device will be added or removed in subsequent patch during SF devlink port function state change command. A subfunction device exposes user supplied subfunction number which will be further used by systemd/udev to have deterministic name for its netdevice and rdma device. An mlx5 subfunction auxiliary device example: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached $ devlink port show ens2f0npf0sf88 pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false function: hw_addr 00:00:00:00:88:88 state inactive opstate detached $ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88 state active On activation, $ ls -l /sys/bus/auxiliary/devices/ mlx5_core.sf.4 -> ../../../devices/pci0000:00/0000:00:03.0/0000:06:00.0/mlx5_core.sf.4 $ cat /sys/bus/auxiliary/devices/mlx5_core.sf.4/sfnum 88 Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22net/mlx5: Introduce vhca state event notifierParav Pandit11-0/+418
vhca state events indicates change in the state of the vhca that may occur due to a SF allocation, deallocation or enabling/disabling the SF HCA. Introduce vhca state event handler which will be used by SF devlink port manager and SF hardware id allocator in subsequent patches to act on the event. This enables single entity to subscribe, query and rearm the event for a function. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg9-16/+16
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net: ipa: remove a remoteproc dependencyAlex Elder2-38/+2
The IPA driver currently requires a DT property to be defined whose value is the phandle for the modem subsystem. This was needed to look up a remoteproc structure pointer used when registering for notifications in the original IPA notification mechanism. Remoteproc provides a more generic SSR notifier system, and the IPA driver switched over to it last summer, but this remoteproc phandle dependency was not removed at that time. Get rid of the IPA remoteproc pointer and stop requiring the phandle be specified. This avoids a link error (rproc_put() not defined) for certain configurations. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.