aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-11-07rtw88: remove extraneous 'const' qualifierArnd Bergmann1-1/+1
clang -Wextra warns about functions returning a 'const' integer: drivers/net/wireless/realtek/rtw88/rtw8822b.c:90:8: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] static const u8 rtw8822b_get_swing_index(struct rtw_dev *rtwdev) Remove the extra qualifier here. Fixes: c97ee3e0bea2 ("rtw88: add power tracking support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-7-arnd@kernel.org
2020-11-07rtlwifi: fix -Wpointer-sign warningArnd Bergmann3-44/+45
There are thousands of warnings in a W=2 build from just one file: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c:3788:15: warning: pointer targets in initialization of 'u8 *' {aka 'unsigned char *'} from 'char *' differ in signedness [-Wpointer-sign] Change the types to consistently use 'const char *' for the strings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-6-arnd@kernel.org
2020-11-07net: hostap: fix function cast warningArnd Bergmann1-12/+5
gcc -Wextra complains about the function type cast: drivers/net/wireless/intersil/hostap/hostap_hw.c:3173:48: warning: cast between incompatible function types from ‘void (*)(struct tasklet_struct *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type] Avoid this by just using the regular tasklet_setup() function instead of the incorrect homegrown version. Fixes: 7433c9690318 ("intersil: convert tasklets to use new tasklet_setup() API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-2-arnd@kernel.org
2020-11-07wireless: remove unneeded breakTom Rix7-10/+0
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020125841.26791-1-trix@redhat.com
2020-11-07rsi: Fix TX EAPOL packet handling against iwlwifi APMarek Vasut1-1/+2
In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode, the association fails. The former is using wpa_supplicant during association, the later is set up using hostapd: iwl$ cat hostapd.conf interface=wlp1s0 ssid=test country_code=DE hw_mode=g channel=1 wpa=2 wpa_passphrase=test wpa_key_mgmt=WPA-PSK iwl$ hostapd -d hostapd.conf rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test) The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter. The downstream vendor driver has this change in place already [1], however there is no explanation for it, neither is there any commit history from which such explanation could be obtained. [1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
2020-11-07wlcore: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* fall-through */ comments with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201008220905.GA8040@embeddedor
2020-11-07ray_cs: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+3
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* fall through */ comments with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201008220422.GA6926@embeddedor
2020-11-07wireless: mt7601u: convert tasklets to use new tasklet_setup() APIAllen Pais1-6/+6
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007103309.363737-3-allen.lkml@gmail.com
2020-11-07ath11k: fix ZERO address in probe requestCarl Huang1-0/+5
Host needs to pass at least on bssid with all 0xff to firmware in WMI_START_SCAN_CMDID, otherwise the bssid and receiver address in probe requeste are all ZEROs. This also fixed some hidden AP connection issue because some AP doesn't respond to probe request which receiver address are all ZEROs. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201012101733.24137-1-cjhuang@codeaurora.org
2020-11-07wil6210: wmi: Correct misnamed function parameter 'ptr_'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block' drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Excess function parameter 'ptr' description in 'wmi_buffer_block' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-2-lee.jones@linaro.org
2020-11-07wcn36xx: Enable firmware offloaded keepaliveBryan O'Donoghue1-0/+1
This patch calls wcn36xx_smd_keep_alive_req() on the STA patch immediately after associating with an AP. This will cause the firmware to send a NULL packet out to the AP every 30 seconds, thus offloading keep-alive processing from the SoC to the firmware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-4-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Enable firmware link monitoringBryan O'Donoghue1-0/+1
This patch switches on CONNECTION_MONITOR. Once done it is up to the firmware to send keep alive and to monitor the link state. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-3-bryan.odonoghue@linaro.org
2020-11-07wcn36xx: Set LINK_FAIL_TX_CNT to 1000 on all wcn36xxBryan O'Donoghue1-1/+2
The firmware parameter LINK_FAIL_TX_CNT maps to the prima configuration file parameter gLinkFailTxCnt and is described as: quote: " If within gLinkFailTimeout period(values is mentioned in msec) if FW doesn't receive acks for gLinkFailTxCnt number of packets, then link will be disconnected." The downstream description sets a minimum value of 1000 a maximum value of 60000 and a default value of 6000, however it appears that unless we actually set this value deliberately firmware defaults it to 0. Setting this value to non-zero results in the firmware doing link monitoring. The working example from downstream paradoxically sets the value to 200, here we opt to set the value to the minimum stipulated in the configuration file 1000. In conjunction with ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR); this change effects offload of link monitoring to the firmware. Tested with: 'CNSS-PR-2-0-1-2-c1-74-130449-3' wcn3620 'CNSS-PR-2-0-1-2-c1-00083' wcn3680 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103121735.291324-2-bryan.odonoghue@linaro.org
2020-11-07ath6kl: fix enum-conversion warningArnd Bergmann1-2/+2
gcc -Wextra points out a type mismatch drivers/net/wireless/ath/ath6kl/wmi.c: In function 'ath6kl_wmi_cmd_send': drivers/net/wireless/ath/ath6kl/wmi.c:1825:19: warning: implicit conversion from 'enum <anonymous>' to 'enum wmi_data_hdr_data_type' [-Wenum-conversion] 1825 | false, false, 0, NULL, if_idx); | ^~~~~ As far as I can tell, the numeric value is current here, so just use the correct enum literal instead of 'false'. Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201026213040.3889546-9-arnd@kernel.org
2020-11-07ath9k: dynack: Demote non-compliant function headerLee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'old' not described in 'ath_dynack_ewma' drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'new' not described in 'ath_dynack_ewma' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-40-lee.jones@linaro.org
2020-11-07ath9k: ar5008_phy: Demote half completed function headersLee Jones1-12/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'rfBuf' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'reg32' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'numBits' not described in 'ar5008_hw_phy_modify_rx_buffer' drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'firstBit' not described in 'ar5008_hw_phy_modify_rx_buffer' Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-21-lee.jones@linaro.org
2020-11-07ath9k: ar9003_2p2_initvals: Remove unused const variablesLee Jones1-14/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1734:18: warning: ‘ar9300PciePhy_clkreq_disable_L1_2p2’ defined but not used [-Wunused-const-variable=] drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1727:18: warning: ‘ar9300PciePhy_clkreq_enable_L1_2p2’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-14-lee.jones@linaro.org
2020-11-07ath9k: ar9485_initvals: Remove unused const variable 'ar9485_fast_clock_1_1_baseband_postamble'Lee Jones1-7/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9485_initvals.h:1009:18: warning: ‘ar9485_fast_clock_1_1_baseband_postamble’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-13-lee.jones@linaro.org
2020-11-07ath9k: ar9340_initvals: Remove unused const variable 'ar9340Modes_ub124_tx_gain_table_1p0'Lee Jones1-101/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9340_initvals.h:624:18: warning: ‘ar9340Modes_ub124_tx_gain_table_1p0’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-12-lee.jones@linaro.org
2020-11-07ath9k: ar9330_1p1_initvals: Remove unused const variable 'ar9331_common_tx_gain_offset1_1'Lee Jones1-7/+0
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h:1013:18: warning: ‘ar9331_common_tx_gain_offset1_1’ defined but not used [-Wunused-const-variable=] Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-11-lee.jones@linaro.org
2020-11-07ath: dfs_pri_detector: Demote zero/half completed kernel-doc headersLee Jones1-5/+4
There are only a couple of these and none of them are conformant. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/dfs_pri_detector.c:39: warning: Function parameter or member 'head' not described in 'pulse_elem' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'val' not described in 'pde_get_multiple' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'fraction' not described in 'pde_get_multiple' drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'tolerance' not described in 'pde_get_multiple' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-23-lee.jones@linaro.org
2020-11-07ath: dfs_pattern_detector: Fix some function kernel-doc headersLee Jones1-6/+8
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/dfs_pattern_detector.c:34: warning: Function parameter or member 'region' not described in 'radar_types' drivers/net/wireless/ath/dfs_pattern_detector.c:141: warning: Function parameter or member 'region' not described in 'get_dfs_domain_radar_types' drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'dpd' not described in 'channel_detector_get' drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'freq' not described in 'channel_detector_get' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-22-lee.jones@linaro.org
2020-11-07ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' paramLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/regd.c:378: warning: Function parameter or member 'reg' not described in 'ath_reg_apply_ir_flags' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-20-lee.jones@linaro.org
2020-11-07ath11k: Add new dfs region name for JPLavanya Suresh2-0/+2
Japan has new Radar types as per latest regulatory, included under MKK_N in FW. So adding new enum in ath11k to support it. Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604563475-5782-1-git-send-email-lavaks@codeaurora.org
2020-11-07ath11k: fix wmi init configurationKarthikeyan Periyasamy1-2/+2
Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to the hw IPQ8074. Also update the correct TWT radio count. Incorrect TWT radio count cause TWT feature fails on radio2 because physical device count is hardcoded to 2. so set the value dynamically. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params") Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604512020-25197-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix the hal descriptor maskKarthikeyan Periyasamy1-3/+3
Below listed hal descriptor mask are incorrect, so modify it to correct one - CE destination status description meta info mask is increased from 8 bits to 16 bits from the 0th bit position - Rx Reo queue duplicate count mask is decreased from 22 bits to 16 bits - Reo threshold status counter sum mask is increased from 24 bits to 26 bits No functionality impact, these descriptors are currently not used in any supported platform. But in future if someone referred these descriptor then ended with wrong values. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604511921-24840-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix single phy hw modeKarthikeyan Periyasamy1-3/+0
driver not able to bootup in the single radio configured board. single phy hw mode is converted to invalid hw mode and sent to FW through wmi init cmd. In that case driver is not receiving wmi ready event which leads to driver bootup fail. single phy hw mode is a valid for single radio configured board. so removed the conversion logic. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604511331-22477-1-git-send-email-periyasa@codeaurora.org
2020-11-07ath11k: Fix number of rules in filtered ETSI regdomainSven Eckelmann1-2/+3
The ath11k code will try to insert wheather rader related limits when the DFS region is set to ETSI. For this reason, it will add two more entries in the array of reg_rules. But the 2.4.0.1 firmware is prefiltering the list of reg rules it returns for 2.4GHz PHYs. They will then not contain the list of 5GHz rules and thus no wheather radar band rules were inserted by this code. But the code didn't fix the n_reg_rules for this regulatory domain and PHY when this happened. This resulted in a rejection by is_valid_rd because it found rules which start and end at 0khz. This resulted in a splat like: Invalid regulatory domain detected ------------[ cut here ]------------ WARNING: at backports-20200628-4.4.60-9a94b73e75/net/wireless/reg.c:3721 [...] ath11k c000000.wifi1: failed to perform regd update : -22 The number of rules must therefore be saved after they were converted from the ath11k format to the ieee80211_regdomain format and not before. Tested with IPQ8074 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030101940.2387952-1-sven@narfation.org
2020-11-07ath11k: Remove unused param from wmi_mgmt_paramsGovind Singh1-1/+0
qdf_ctx is not used in wmi_mgmt_params, remove this un-used variable. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603339175-12706-1-git-send-email-govinds@codeaurora.org
2020-11-07ath11k: Initialize complete alpha2 for regulatory changeSven Eckelmann1-0/+1
The function ath11k_wmi_send_init_country_cmd is taking 3 byte from alpha2 of the structure wmi_init_country_params. But the function ath11k_reg_notifier is only initializing 2 bytes. The third byte is therefore always an uninitialized value. The command can happen to look like 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 f8 00 instead of 0c 00 87 02 01 00 00 00 00 00 00 00 43 41 00 00 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201021140555.4114715-1-sven@narfation.org
2020-11-07ath11k: cold boot calibration supportGovindaraj Saminathan6-7/+100
cold boot calibration is the process to calibrate all the channels during the boot-up to avoid the calibration delay during the channel change. During the boot-up, firmware started in cold boot calibration mode Firmware calibrate all channels and generate CalDb(DDR). Subsequent wifi bringup will reuse the same CalDb. Firmware is restarted in normal mode to continue the normal operation. caldb memory address send to firmware through the QMI message.Firmware use this address to store the caldb data and use it until next reboot. This will give the improvement during the channel change. But it is increasing the boot-up time(up to 15sec depend on number of radios). So if the user want to reduce the boot-up time and accepting for channel change delay, user can disable this feature using the module param cold_boot_cal=0. Tested-on: IPQ8074 WLAN.HK.2.4.0.1-01162-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Co-developed-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1602862111-14063-1-git-send-email-ssreeela@codeaurora.org
2020-11-07ath11k: search DT for qcom,ath11k-calibration-variantSven Eckelmann4-2/+41
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on IPQ6018 using bus, qmi-chip-id and qmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. This problem was already solved on ath10k by adding a ",variant=.*" at the end of the board name. The same functionality must also be provided for ath11k. The device tree requires an additional string to define the variant name wifi@c000000 { status = "okay"; qcom,ath11k-calibration-variant = "Cigtech-WF-188"; }; This would create the boarddata identifier for the board-2.bin search * bus=ahb,qmi-chip-id=0,qmi-board-id=18,variant=Cigtech-WF-188 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015131501.1939685-2-sven@narfation.org
2020-11-07ath11k: Remove unnecessary data sync to cpu on monitor bufferVasanthakumar Thiagarajan1-4/+0
Monitor ring Rx buffer is not really modified between dma map and unmap. So remove the unnecssary data sync before dma unmap. This does not fix any visible issue, found in code review. Compile tested only. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1602744454-22969-1-git-send-email-vthiagar@codeaurora.org
2020-11-07ath11k: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007103309.363737-4-allen.lkml@gmail.com
2020-11-07ath10k: cancel rx worker in hif_stop for SDIOWen Gong1-0/+6
The rx worker of SDIO should be cancelled after disable interrupt, and release rx sk_buff in queue, otherwise the rx worker maybe still run after hif_stop. And it should be cancelled before napi_synchronize in hif_stop, because the rx worker of SDIO will call napi_schedule, it should have no napi_schedule before napi_synchronize, otherwise it lead napi_synchronize wait untill napi_complete. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604558036-4056-1-git-send-email-wgong@codeaurora.org
2020-11-07ath10k: Don't iterate over not-sdata-in-driver interfaces.Ben Greear4-11/+14
This fixes possible crash scenario where interfaces that were not set up in the driver yet might still be iterated over. When originally debugged on the ath10k-ct driver, the crash looked like this: kernel BUG at /home/greearb/git/linux-4.7.dev.y/drivers/net/wireless/ath/ath10k/wmi.c:1781! invalid opcode: 0000 [#1] PREEMPT SMP KASAN Modules linked in: nf_conntrack_netlink nf_conntrack nfnetlink nf_defrag_ipv4 bridge carl9170 mac80211_hwsim ath10k_pci ath10k_core ath5k ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 8021q garp mrp stp llc bnep bluetooth fuse macvlan pktgen rpcsec_gss_krb5 nfsv4 nfs fscache snd_hda_codec_hdmi coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic kvm iTCO_wdt irqbypass iTCO_vendor_support joydev snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device pcspkr snd_pcm snd_timer shpchp snd i2c_i801 lpc_ich soundcore tpm_tis tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 serio_raw i2c_algo_bit drm_kms_helper ata_generic e1000e pata_acpi drm ptp pps_core i2c_core fjes video ipv6 [last unloaded: nf_conntrack] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.10+ #15 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 task: ffff8801d4f20000 ti: ffff8801d4f28000 task.ti: ffff8801d4f28000 RIP: 0010:[<ffffffffa0efbcfb>] [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core] RSP: 0018:ffff8801d6447a98 EFLAGS: 00010293 RAX: 0000000000000018 RBX: ffff8801ce97e1d8 RCX: 0000000000000000 RDX: 0000000000000018 RSI: 0000000000000003 RDI: ffffed003ac88f49 RBP: ffff8801d6447af0 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff8801ce97e320 R14: ffff8801ce97e378 R15: ffff8801ce97ca40 FS: 0000000000000000(0000) GS:ffff8801d6440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007eff191ef1ab CR3: 000000000260a000 CR4: 00000000001406e0 Stack: 1ffff1003ac88f59 0000000041b58ab3 ffffffffa0f4d52a ffff8801d4f20000 0000000000000246 0000000000000002 ffff8801ce97e1d8 ffff8801bd5d39b8 0000000000000002 0000000000000001 ffff8801ce97ca40 ffff8801d6447b48 Call Trace: <IRQ> [<ffffffffa0d03e5c>] __iterate_interfaces+0xfc/0x1d0 [mac80211] [<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core] [<ffffffffa0efba70>] ? ath10k_wmi_cmd_send_nowait+0x260/0x260 [ath10k_core] [<ffffffffa0d04477>] ieee80211_iterate_active_interfaces_atomic+0x67/0x100 [mac80211] [<ffffffffa0d04410>] ? ieee80211_handle_reconfig_failure+0x140/0x140 [mac80211] [<ffffffffa0ef4060>] ? ath10k_tpc_config_disp_tables+0x620/0x620 [ath10k_core] [<ffffffffa0ef408b>] ath10k_wmi_op_ep_tx_credits+0x2b/0x50 [ath10k_core] [<ffffffffa0ee2fd2>] ath10k_htc_rx_completion_handler+0x422/0x5c0 [ath10k_core] [<ffffffffa0b4301e>] ath10k_pci_process_rx_cb+0x37e/0x430 [ath10k_pci] [<ffffffffa0ee2bb0>] ? ath10k_htc_build_tx_ctrl_skb+0xc0/0xc0 [ath10k_core] [<ffffffffa0b42ca0>] ? ath10k_pci_rx_post_pipe+0x550/0x550 [ath10k_pci] [<ffffffff8120cbe5>] ? debug_lockdep_rcu_enabled+0x35/0x40 [<ffffffff811e1893>] ? mark_held_locks+0x23/0xc0 [<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0 [<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290 [<ffffffff811e1bcd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8116019a>] ? __local_bh_enable_ip+0x6a/0xd0 [<ffffffff81df11d0>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffffa0b4902e>] ? ath10k_ce_per_engine_service+0xee/0x100 [ath10k_pci] [<ffffffffa0b43139>] ath10k_pci_htt_htc_rx_cb+0x29/0x30 [ath10k_pci] [<ffffffffa0b48fe6>] ath10k_ce_per_engine_service+0xa6/0x100 [ath10k_pci] [<ffffffffa0b49116>] ath10k_ce_per_engine_service_any+0xd6/0xf0 [ath10k_pci] [<ffffffffa0b45800>] ? ath10k_pci_enable_legacy_irq+0xe0/0xe0 [ath10k_pci] [<ffffffffa0b4585f>] ath10k_pci_tasklet+0x5f/0xb0 [ath10k_pci] [<ffffffff81160445>] tasklet_action+0x245/0x2b0 [<ffffffff81df4831>] __do_softirq+0x181/0x595 [<ffffffff8116137c>] irq_exit+0xbc/0xc0 [<ffffffff81df423c>] do_IRQ+0x7c/0x150 [<ffffffff81df23cc>] common_interrupt+0x8c/0x8c <EOI> [<ffffffff811e1abb>] ? trace_hardirqs_on_caller+0x18b/0x290 [<ffffffff81b722ae>] ? cpuidle_enter_state+0x1ae/0x4b0 [<ffffffff81b722a7>] ? cpuidle_enter_state+0x1a7/0x4b0 [<ffffffff81b72602>] cpuidle_enter+0x12/0x20 [<ffffffff811d0b6e>] call_cpuidle+0x4e/0x90 [<ffffffff811d10e7>] cpu_startup_entry+0x3f7/0x540 [<ffffffff811d0cf0>] ? default_idle_call+0x50/0x50 [<ffffffff81234bdf>] ? clockevents_config_and_register+0x5f/0x70 [<ffffffff81085a9a>] ? setup_APIC_timer+0xfa/0x110 [<ffffffff81083b63>] start_secondary+0x253/0x2b0 [<ffffffff81083910>] ? set_cpu_sibling_map+0x920/0x920 Code: 4d 49 e0 8b b3 48 01 00 00 48 c7 c7 a0 ee f3 a0 e8 d9 c2 3f e0 49 81 fd 3f 1f 00 00 76 0f 49 81 fc 3f 1f 00 00 0f 87 c0 fd ff ff <0f> 0b 0f 0b 90 55 48 89 e5 41 57 41 56 48 8d 85 58 ff ff ff 41 RIP [<ffffffffa0efbcfb>] ath10k_wmi_tx_beacons_iter+0x28b/0x290 [ath10k_core] RSP <ffff8801d6447a98> ---[ end trace 6588464714e5163a ]--- Similar logic was tested for years in ath10k-ct driver and various firmware. Also tested with stock kernel plus this patch, with firmware 10.2.4-1.0-00037 This test case was to bring up 5 vap on a radio and fake a firmware crash. Make sure ap interfaces continue to function properly. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200922191957.25257-2-greearb@candelatech.com
2020-11-07ath10k: fix compilation warningTamizh Chelvam1-1/+2
This change fixes below compilation warning. smatch warnings: drivers/net/wireless/ath/ath10k/mac.c:9125 ath10k_mac_op_set_tid_config() error: uninitialized symbol 'ret'. No functional changes. Compile tested only. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604507837-29361-1-git-send-email-tamizhr@codeaurora.org
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski30-118/+254
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Revert ibmvnic merge do_change_param_reset into do_resetDany Madden1-43/+104
This reverts commit 16b5f5ce351f8709a6b518cc3cbf240c378305bf where it restructures do_reset. There are patches being tested that would require major rework if this is committed first. We will resend this after the other patches have been applied. Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20201106191745.1679846-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds27-113/+250
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc3, including fixes from wireless, can, and netfilter subtrees. Current merge window - bugs in new features: - can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Previous releases - regressions: - mac80211: - don't require VHT elements for HE on 2.4 GHz - fix regression where EAPOL frames were sent in plaintext - netfilter: - ipset: Update byte and packet counters regardless of whether they match - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if inner packet has IP_DF (don't fragment) set in its header (when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev) - net: fec: fix MDIO probing for some FEC hardware blocks - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso support - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms, sparse-related fix used the wrong integer size Previous releases - always broken: - netfilter: use actual socket sk rather than skb sk when routing harder - r8169: work around short packet hw bug on RTL8125 by padding frames - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement, the hardware does not support it - chelsio/chtls: fix always leaking ctrl_skb and another leak caused by a race condition - fix drivers incorrectly writing into skbs on TX: - cadence: force nonlinear buffers to be cloned - gianfar: Account for Tx PTP timestamp in the skb headroom - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP - can: flexcan: - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A - add ECC initialization for VF610 and LX2160A - flexcan_remove(): disable wakeup completely - can: fix packet echo functionality: - peak_canfd: fix echo management when loopback is on - make sure skbs are not freed in IRQ context in case they need to be dropped - always clone the skbs to make sure they have a reference on the socket, and prevent it from disappearing - fix real payload length return value for RTR frames - can: j1939: return failure on bind if netdev is down, rather than waiting indefinitely Misc: - IPv6: reply ICMP error if the first fragment don't include all headers to improve compliance with RFC 8200" * tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) ionic: check port ptr before use r8169: work around short packet hw bug on RTL8125 net: openvswitch: silence suspicious RCU usage warning chelsio/chtls: fix always leaking ctrl_skb chelsio/chtls: fix memory leaks caused by a race can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text ...
2020-11-06netdevsim: Allow programming routes with nexthop objectsIdo Schimmel1-10/+0
Previous patches added the ability to program nexthop objects. Therefore, no longer forbid the programming of routes that point to such objects. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06netdevsim: Add dummy implementation for nexthop offloadIdo Schimmel1-3/+229
Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06netdevsim: Add devlink resource for nexthopsIdo Schimmel3-1/+29
The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06nexthop: Pass extack to register_nexthop_notifier()Ido Schimmel1-1/+2
This will be used by the next patch which extends the function to replay all the existing nexthops to the notifier block being registered. Device drivers will be able to pass extack to the function since it is passed to them upon reload from devlink. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06nexthop: vxlan: Convert to new notification infoIdo Schimmel1-2/+7
Convert the sole listener of the nexthop notification chain (the VXLAN driver) to the new notification info. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06ath11k: FILS discovery and unsolicited broadcast probe response supportAloka Dixit3-0/+307
This patch adds driver support for FILS discovery and unsolicited broadcast probe response transmission features which are used for in-band discovery in 6GHz band. Currently this support is enabled only in 6GHz by setting hardware flags. Changes include WMI commands to enable transmission, set packet interval, set template, and handle events. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007204036.19780-1-alokad@codeaurora.org
2020-11-06ath10k: sdio: remove redundant check in for loopAlex Dewar1-9/+3
The for loop checks whether cur_section is NULL on every iteration, but we know it can never be NULL as there is another check towards the bottom of the loop body. Refactor to avoid this unnecessary check. Also, increment the variable i inline for clarity Addresses-Coverity: 1496984 ("Null pointer dereferences) Suggested-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200916165748.20927-1-alex.dewar90@gmail.com
2020-11-05Merge tag 'mlx5-updates-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski19-462/+586
Saeed Mahameed says: ==================== mlx5-updates-2020-11-03 This series includes updates to mlx5 software steering component. 1) Few improvements in the DR area, such as removing unneeded checks, renaming to better general names, refactor in some places, etc. 2) Software steering (DR) Memory management improvements This patch series contains SW Steering memory management improvements: using buddy allocator instead of an existing bucket allocator, and several other optimizations. The buddy system is a memory allocation and management algorithm that manages memory in power of two increments. The algorithm is well-known and well-described, such as here: https://en.wikipedia.org/wiki/Buddy_memory_allocation Linux uses this algorithm for managing and allocating physical pages, as described here: https://www.kernel.org/doc/gorman/html/understand/understand009.html In our case, although the algorithm in principal is similar to the Linux physical page allocator, the "building blocks" and the circumstances are different: in SW steering, buddy allocator doesn't really allocates a memory, but rather manages ICM (Interconnect Context Memory) that was previously allocated and registered. The ICM memory that is used in SW steering is always power of 2 (order), so buddy system is a good fit for this. Patches in this series: [PATH 4] net/mlx5: DR, Add buddy allocator utilities This patch adds a modified implementation of a well-known buddy allocator, adjusted for SW steering needs: the algorithm in principal is similar to the Linux physical page allocator, but in our case buddy allocator doesn't really allocate a memory, but rather manages ICM memory that was previously allocated and registered. [PATH 5] net/mlx5: DR, Handle ICM memory via buddy allocation instead of bucket management This patch changes ICM management of SW steering to use buddy-system mechanism Instead of the previous bucket management. [PATH 6] net/mlx5: DR, Sync chunks only during free This patch makes syncing happen only when freeing memory chunks. [PATH 7] net/mlx5: DR, ICM memory pools sync optimization This patch adds tracking of pool's "hot" memory and makes the check whether steering sync is required much shorter and faster. [PATH 8] net/mlx5: DR, Free buddy ICM memory if it is unused This patch adds tracking buddy's used ICM memory, and frees the buddy if all its memory becomes unused. 3) Misc code cleanups * tag 'mlx5-updates-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net: mlx5: Replace in_irq() usage net/mlx5: Cleanup kernel-doc warnings net/mlx4: Cleanup kernel-doc warnings net/mlx5e: Validate stop_room size upon user input net/mlx5: DR, Free unused buddy ICM memory net/mlx5: DR, ICM memory pools sync optimization net/mlx5: DR, Sync chunks only during free net/mlx5: DR, Handle ICM memory via buddy allocation instead of buckets net/mlx5: DR, Add buddy allocator utilities net/mlx5: DR, Rename matcher functions to be more HW agnostic net/mlx5: DR, Rename builders HW specific names net/mlx5: DR, Remove unused member of action struct ==================== Link: https://lore.kernel.org/r/20201105201242.21716-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05net/usb/r8153_ecm: support ECM mode for RTL8153Hayes Wang3-27/+167
Support ECM mode based on cdc_ether with relative mii functions, when CONFIG_USB_RTL8152 is not set, or the device is not supported by r8152 driver. Both r8152 and r8153_ecm would check the return value of rtl8152_get_version() in porbe(). If rtl8152_get_version() return none zero value, the r8152 is used for the device with vendor mode. Otherwise, the r8153_ecm is used for the device with ECM mode. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05net: Add mhi-net driverLoic Poulain3-0/+324
This patch adds a new network driver implementing MHI transport for network packets. Packets can be in any format, though QMAP (rmnet) is the usual protocol (flow control + PDN mux). It support two MHI devices, IP_HW0 which is, the path to the IPA (IP accelerator) on qcom modem, And IP_SW0 which is the software driven IP path (to modem CPU). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1604424234-24446-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.