aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-02net/mlx5e: TC, Support offloading police actionJianbo Liu9-5/+124
Add parsing support by implementing struct mlx5e_tc_act for police action. TC rule with police actions is broken down into several rules in different tables. One rule with the original match in the original flow table, which set fte_id, do metering, and jump to the post_meter table. If there are more police actions, more rules are created for each of them. Besides, a last rule is created in the end. In post_meter table, there are two pre-defined rules, one is to drop packet if its packet color is RED, the other is to jump back to post_act table. As fte_id is updated before jumping, the rule for next meter is matched to do another round of metering (if there are multiple meters in the flow rule). Otherwise, last fte_id is matched and do the original actions. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Add flow_action to parse stateJianbo Liu3-3/+3
As a preparation for validating police action, adds flow_action to parse state, which is to passed to parsing callbacks. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Add post meter table for flow meteringJianbo Liu7-3/+245
Flow meter object monitors the packets rate for the flows it is attached to, and color packets with GREEN or RED. The post meter table is used to check the color. Packet is dropped if it's RED, or forwarded to post_act table if GREEN. Packet color will be set to 8 LSB of the register C5, so they are reserved for metering, which are previously used for matching fte id. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Add generic macros to use metadata register mappingJianbo Liu5-10/+12
There are many definitions to get bits and mask for different types of metadata register mapping, add generic macros to unify them. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Get or put meter by the index of tc police actionJianbo Liu2-0/+226
Add functions to create and destroy flow meter aso object. This object only supports the range allocation. 64 objects are allocated at a time, and there are two meters in each object. Usually only one meter is allocated for a flow, so bitmap is used to manage these 128 meters. TC police action is mapped to hardware meter. As the index is unique for each police action, add APIs to allocate or free hardware meter by the index. If the meter is already created, increment its refcnt, otherwise create new one. If police action has different parameters, update hardware meter accordingly. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Add support to modify hardware flow meter parametersJianbo Liu3-0/+192
The policing rate and burst from user are converted to flow meter parameters in hardware. These parameters are set or modified by ACCESS_ASO WQE, add function to support it. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5e: Prepare for flow meter offload if hardware supports itJianbo Liu7-1/+129
If flow meter aso object is supported, set the allocated range, and initialize aso wqe. The allocated range is indicated by log_meter_aso_granularity in HW capabilities, and currently is 6. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: Implement interfaces to control ASO SQ and CQJianbo Liu2-0/+162
Add interfaces to use ASO object control channel. The channel consists of a control SQ and CQ to which user can post ACCESS_ASO work requests to modify ASO objects. The functions to get wqe from SQ, fill wqe, post the request, and poll the completion of the work, are provided. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: Add support to create SQ and CQ for ASOJianbo Liu3-1/+350
Add a separate API to create SQ and CQ for advanced steering operations (ASO). Since the mlx5_en API to create these resources is strongly coupled with netdev channels and datapath elements, this API provides an alternative for creating send queues that are used for ASO. Currently the API allows creating channels with 2 wqbbs only - meaning the support will be for a single ACCESS_ASO wqe with data at a time. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: E-switch: Change eswitch mode only via devlink commandChris Mi3-22/+15
Enable or disable switchdev according to the eswitch mode set by devlink command. So it is not changed by other functions anymore. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: E-switch, Remove dependency between sriov and eswitch modeChris Mi7-81/+83
Currently, there are three eswitch modes, none, legacy and switchdev. None is the default mode. Remove redundant none mode as eswitch mode should always be either legacy mode or switchdev mode. With this patch, there are two behavior changes: 1. Legacy becomes the default mode. When querying eswitch mode using devlink, a valid mode is always returned. 2. When disabling sriov, the eswitch mode will not change, only vfs are unloaded. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: E-switch, Introduce flag to indicate if fdb table is createdChris Mi2-0/+12
Introduce flag to indicate if fdb table is created as a pre-step to prepare for removing dependency between sriov and eswitch mode in the downstream patches. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: E-switch, Introduce flag to indicate if vport acl namespace is createdChris Mi2-0/+6
Eswitch vport acl namespace is needed when loading vfs. There is no need to free and reallocate it when switching eswitch mode. Introduce flag to indicate if it is created or not. When needed, create it. Only free it when the driver is unloaded or in bare metal mode. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: delete dead code in mlx5_esw_unlock()Dan Carpenter1-2/+0
Smatch complains about this function: drivers/net/ethernet/mellanox/mlx5/core/eswitch.c:2000 mlx5_esw_unlock() warn: inconsistent returns '&esw->mode_lock'. Before commit ec2fa47d7b98 ("net/mlx5: Lag, use lag lock") there used to be a matching mlx5_esw_lock() function and the lock and unlock functions were symmetric. But now we take the lock unconditionally and must unlock unconditionally as well. As near as I can tell this is dead code and can just be deleted. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net/mlx5: Delete ipsec_fs header file as not usedLeon Romanovsky1-21/+0
ipsec_fs.h is not used and can be safely deleted. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02net: dsa: microchip: add LAN937x in the ksz spi probeArun Ramadoss1-0/+26
This patch add the LAN937x part support in the existing ksz_spi_probe. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add phylink_mac_config supportArun Ramadoss4-2/+74
This patch add support for phylink_mac_config dsa hook. It configures the mac for MII/RMII modes. The RGMII mode will be added in the future patches. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add phylink_mac_link_up supportArun Ramadoss5-0/+82
This patch add support for phylink_mac_link_up. It configures the mac for the speed, flow control and duplex mode. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add phylink_get_caps supportArun Ramadoss3-0/+15
The internal phy of the LAN937x are capable of 100Mbps Full duplex. The xMII port of switch is capable of 10Mbps Full & Half Duplex, 100Mbps Full & Half Duplex and 1000Mbps Half duplex. xMII port also supports Tx and Rx Flow control. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add MTU and fast_age supportArun Ramadoss4-0/+36
This patch add the support for port_max_mtu, port_change_mtu and port_fast_age dsa functionality. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: register mdio-busArun Ramadoss1-0/+74
This patch register mdio-bus for the lan937x series switch. mdio read and write uses the vphy for accessing the phy register. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add phy read and write supportArun Ramadoss4-0/+156
This patch add support for the writing and reading of the phy registers. LAN937x uses the Vphy indirect addressing method for accessing the phys. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: lan937x: add dsa_tag_protocolArun Ramadoss2-0/+12
This patch update the ksz_get_tag_protocol to return LAN937x specific tag if the chip id matches one of LAN937x series switch Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: add DSA support for microchip LAN937xArun Ramadoss6-1/+333
Basic DSA driver support for lan937x and the device will be configured through SPI interface. It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the functionality of ksz9477 series switch. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: dsa: microchip: generic access to ksz9477 static and reserved tableArun Ramadoss4-10/+58
The ksz9477 and lan937x has few difference in the static and reserved table register 0x041C. For the ksz9477 if the bit 0 is 1 - read operation and 0 - write operation. But for lan937x bit 1:0 used for selecting the read/write operation, 01 - write and 10 - read. To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks & shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then updated the function with masks & shifts based on the switch instead of hard coding it. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: phy: micrel: Adding LED feature for LAN8814 PHYDivya Koppera1-17/+56
LED support for extended mode where LED 1: Enhanced Mode 5 (10M/1000M/Activity) LED 2: Enhanced Mode 4 (100M/1000M/Activity) By default it supports KSZ9031 LED mode Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet44-110/+84
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01qlogic/qed: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'a'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220630123924.7531-1-yuanjilin@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01samsung/sxgbe: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'are'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220630124639.11420-1-yuanjilin@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01stmicro/stmmac: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'all'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220630125222.14357-1-yuanjilin@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01ethernet/sun: fix repeated words in commentsJilin Yuan4-4/+4
Delete the redundant word 'the'. Delete the redundant word 'is'. Delete the redundant word 'start'. Delete the redundant word 'checking'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220630130916.21074-1-yuanjilin@cdjrlc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01usbnet: remove vestiges of debug macrosOliver Neukum1-3/+0
The driver has long since be converted to dynamic debugging. The internal compile options for more debugging can simply be deleted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01net: pcs: rzn1-miic: update speed only if interface is changedClément Léger1-5/+16
As stated by Russel King, miic_config() can be called as a result of ethtool setting the configuration while the link is already up. Since the speed is also set in this function, it could potentially modify the current speed that is set. This will only happen if there is no PHY present and we aren't using fixed-link mode. Handle that by storing the current interface mode in the miic_port structure and update the speed only if the interface mode is going to be changed. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220629122003.189397-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01octeontx2-af: fix operand size in bitwise operationShijith Thotton1-2/+2
Made size of operands same in bitwise operations. The patch fixes the klocwork issue, operands in a bitwise operation have different size at line 375 and 483. Signed-off-by: Shijith Thotton <sthotton@marvell.com> Link: https://lore.kernel.org/r/f4fba33fe4f89b420b4da11d51255e7cc6ea1dbf.1656586269.git.sthotton@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01net: usb: Fix typo in codeLi kunyu1-1/+1
Remove the repeated ';' from code. Signed-off-by: Li kunyu <kunyu@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01nfp: support VF rate limit with NFDKBin Chen1-0/+1
Support VF rate limiting with NFDK by adding ndo_set_vf_rate to the NFDK ops structure. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The VF rate limit feature is already supported by the driver for NFD3. Signed-off-by: Bin Chen <bin.chen@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01cdc-eem: always use BITOliver Neukum1-1/+1
Either you use BIT(x) or 1 << x in the same expression. Mixing them is ridiculous. Go to BIT() Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01cxgb4: Fix typo in stringLi kunyu1-1/+1
Remove the repeated ',' from string Signed-off-by: Li kunyu <kunyu@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller5-0/+107
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-30 This series contains updates to i40e driver only. Lukasz adds reporting of packets dropped for being too large into the Rx dropped statistics. Norbert clears VF filter and MAC address to resolve issue with older VFs being unable to change their MAC address. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller7-189/+283
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-06-30 This series contains updates to ice driver only. Martyna adds support for VLAN related TC switchdev filters and reworks dummy packet implementation of VLANs to enable dynamic header insertion to allow for more rule types. Lu Wei utilizes eth_broadcast_addr() helper over an open coded version. Ziyang Xuan removes unneeded NULL checks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01neterion/vxge: fix repeated words in commentsJilin Yuan2-2/+2
Delete the redundant word 'frame'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01ethernet/neterion: fix repeated words in commentsJilin Yuan1-5/+5
Delete the redundant word 'the'. Delete the redundant word 'a'. Delete the redundant word 'frame'. Delete the redundant word 'is'. Delete the redundant word 'not'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01ethernet/natsemi: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'in'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01mellanox/mlxsw: fix repeated words in commentsJilin Yuan3-3/+3
Delete the redundant word 'action'. Delete the redundant word 'refer'. Delete the redundant word 'for'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01ethernet/marvell: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'a'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01marvell/octeontx2/af: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'so'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01wifi: cfg80211: Increase akm_suites array size in cfg80211_crypto_settingsVeerendranath Jakkam1-4/+8
Increase akm_suites array size in struct cfg80211_crypto_settings to 10 and advertise the capability to userspace. This allows userspace to send more than two AKMs to driver in netlink commands such as NL80211_CMD_CONNECT. This capability is needed for implementing WPA3-Personal transition mode correctly with any driver that handles roaming internally. Currently, the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256, SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing the akm_suites array size to 10 should be reasonable for future usecases. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01pm/sleep: Add PM_USERSPACE_AUTOSLEEP KconfigKalesh Singh1-1/+2
Systems that initiate frequent suspend/resume from userspace can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP config. This allows for certain sleep-sensitive code (wireguard/rng) to decide on what preparatory work should be performed (or not) in their pm_notification callbacks. This patch was prompted by the discussion at [1] which attempts to remove CONFIG_ANDROID that currently guards these code paths. [1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/ Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-01xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()Jan Beulich1-1/+3
The commit referenced below moved the invocation past the "next" label, without any explanation. In fact this allows misbehaving backends undue control over the domain the frontend runs in, as earlier detected errors require the skb to not be freed (it may be retained for later processing via xennet_move_rx_slot(), or it may simply be unsafe to have it freed). This is CVE-2022-33743 / XSA-405. Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront") Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-07-01xen/netfront: force data bouncing when backend is untrustedRoger Pau Monne1-2/+47
Bounce all data on the skbs to be transmitted into zeroed pages if the backend is untrusted. This avoids leaking data present in the pages shared with the backend but not part of the skb fragments. This requires introducing a new helper in order to allocate skbs with a size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the granted pages. Reporting whether the backend is to be trusted can be done using a module parameter, or from the xenstore frontend path as set by the toolstack when adding the device. This is CVE-2022-33741, part of XSA-403. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.