aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-06-15net: ipa: rename two transaction fieldsAlex Elder2-24/+25
There are two fields in a GSI transaction that keep track of TRE counts. The first represents the number of TREs reserved for the transaction in the TRE ring; that's currently named "tre_count". The second is the number of TREs that are actually *used* by the transaction at the time it is committed. Rename the "tre_count" field to be "rsvd_count", to make its meaning a little more specific. The "_count" is present in the name mainly to avoid interpreting it as a reserved (not-to-be-used) field. This name also distinguishes it from the "tre_count" field associated with a channel. Rename the "used" field to be "used_count", to match the convention used for reserved TREs. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-15net: ipa: use "tre_ring" for all TRE ring local variablesAlex Elder1-9/+9
All local variables that represent event rings are named "ring". All but two functions that represent a channel's TRE ring with a local variable use the name "tre_ring". For consistency, use that name in the two functions that don't fit the pattern. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-14net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constantFrank Wunderlich2-8/+20
Replace last occurences of hardcoded cpu-port by cpu_dp member of dsa_port struct. Now the constant can be dropped. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14net: dsa: mt7530: rework mt753[01]_setupFrank Wunderlich1-4/+21
Enumerate available cpu-ports instead of using hardcoded constant. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14net: dsa: mt7530: rework mt7530_hw_vlan_{add,del}Frank Wunderlich1-18/+12
Rework vlan_add/vlan_del functions in preparation for dynamic cpu port. Currently BIT(MT7530_CPU_PORT) is added to new_members, even though mt7530_port_vlan_add() will be called on the CPU port too. Let DSA core decide when to call port_vlan_add for the CPU port, rather than doing it implicitly. We can do autonomous forwarding in a certain VLAN, but not add br0 to that VLAN and avoid flooding the CPU with those packets, if software knows it doesn't need to process them. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14mlxsw: Revert "Prepare for XM implementation - LPM trees"Petr Machata3-163/+31
This reverts commit 923ba95ea22d ("Merge branch 'mlxsw-spectrum-prepare-for-xm-implementation-lpm-trees'"). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14mlxsw: Revert "Prepare for XM implementation - prefix insertion and removal"Petr Machata3-589/+209
This reverts commit e7086213f7b4 ("Merge branch 'mlxsw-spectrum-prepare-for-xm-implementation-prefix-insertion-and-removal'"). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14mlxsw: Revert "Introduce initial XM router support"Petr Machata11-1518/+8
This reverts commit 75c2a8fe8e39 ("Merge branch 'mlxsw-introduce-initial-xm-router-support'"). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET1-1/+0
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxJakub Kicinski4-15/+85
Saeed Mahameed says: ==================== mlx5-next: updates 2022-06-14 1) Updated HW bits and definitions for upcoming features 1.1) vport debug counters 1.2) flow meter 1.3) Execute ASO action for flow entry 1.4) enhanced CQE compression 2) Add ICM header-modify-pattern RDMA API Leon Says ========= SW steering manipulates packet's header using "modifying header" actions. Many of these actions do the same operation, but use different data each time. Currently we create and keep every one of these actions, which use expensive and limited resources. Now we introduce a new mechanism - pattern and argument, which splits a modifying action into two parts: 1. action pattern: contains the operations to be applied on packet's header, mainly set/add/copy of fields in the packet 2. action data/argument: contains the data to be used by each operation in the pattern. This way we reuse same patterns with different arguments to create new modifying actions, and since many actions share the same operations, we end up creating a small number of patterns that we keep in a dedicated cache. These modify header patterns are implemented as new type of ICM memory, so the following kernel patch series add the support for this new ICM type. ========== * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Add bits and fields to support enhanced CQE compression net/mlx5: Remove not used MLX5_CAP_BITS_RW_MASK net/mlx5: group fdb cleanup to single function net/mlx5: Add support EXECUTE_ASO action for flow entry net/mlx5: Add HW definitions of vport debug counters net/mlx5: Add IFC bits and enums for flow meter RDMA/mlx5: Support handling of modify-header pattern ICM area net/mlx5: Manage ICM of type modify-header pattern net/mlx5: Introduce header-modify-pattern ICM properties ==================== Link: https://lore.kernel.org/r/20220614184028.51548-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14ice: Fix memory corruption in VF driverPrzemyslaw Patynowski1-0/+5
Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a436bdf ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix queue config fail handlingPrzemyslaw Patynowski1-27/+26
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Sync VLAN filtering features for DVMRoman Storozhenko1-15/+28
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix PTP TX timestamp offset calculationMichal Michalik2-1/+32
The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata1-1/+1
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-13amd-xgbe: Use platform_irq_count()Jean-Philippe Brucker1-2/+2
The AMD XGbE driver currently counts the number of interrupts assigned to the device by inspecting the pdev->resource array. Since commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed IRQs from this array, the driver now attempts to get all interrupts from 1 to -1U and gives up probing once it reaches an invalid interrupt index. Obtain the number of IRQs with platform_irq_count() instead. Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13net: phy: fixed_phy: set phy_mask before calling mdiobus_register()Rasmus Villemoes1-0/+1
There's no point probing for phys on this artificial bus, so we can save a little bit of boot time by telling mdiobus_register() not to do that. This doesn't have any functional change, since, at this point, fixed_mdio_read() returns 0xffff for all addresses/registers, so mdiobus_scan() -> get_phy_device() -> get_phy_c22_id() will return -ENODEV, which is just ignored. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220606200208.1665417-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13net/mlx5: Remove not used MLX5_CAP_BITS_RW_MASKShay Drory1-7/+0
Remove not used MLX5_CAP_BITS_RW_MASK. While at it, remove CAP_MASK, MLX5_CAP_OFF_CMDIF_CSUM and MLX5_DEV_CAP_FLAG_*, since MLX5_CAP_BITS_RW_MASK was their only user. Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-13net/mlx5: group fdb cleanup to single functionShay Drory1-8/+10
Currently, the allocation of fdb software objects are done is single function, oppose to the cleanup of them. Group the cleanup of fdb software objects to single function. Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-13net/mlx5: Add support EXECUTE_ASO action for flow entryJianbo Liu1-0/+33
Attach flow meter to FTE with object id and index. Use metadata register C5 to store the packet color meter result. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-13net/mlx5: Manage ICM of type modify-header patternYevgeny Kliteynik1-0/+42
Added support for managing new type of ICM for devices that support sw_owner_v2. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-13can: netlink: allow configuring of fixed data bit rates without need for do_set_data_bittiming callbackMarc Kleine-Budde1-1/+2
This patch is similar to 7e193a42c37c ("can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callback") but for data bit rates instead of bit rates. Usually CAN devices support configurable data bit rates. The limits are defined by struct can_priv::data_bittiming_const. Another way is to implement the struct can_priv::do_set_data_bittiming callback. If the bit rate is configured via netlink, the can_changelink() function checks that either can_priv::data_bittiming_const or struct can_priv::do_set_data_bittiming is implemented. In commit 431af779256c ("can: dev: add CAN interface API for fixed bitrates") an API for configuring bit rates on CAN interfaces that only support fixed bit rates was added. The supported bit rates are defined by struct can_priv::bitrate_const. However the above mentioned commit forgot to add the struct can_priv::data_bitrate_const to the check in can_changelink(). In order to avoid to implement a no-op can_priv::do_set_data_bittiming callback on devices with fixed data bit rates, extend the check in can_changelink() accordingly. Link: https://lore.kernel.org/all/20220613143633.4151884-1-mkl@pengutronix.de Fixes: 431af779256c ("can: dev: add CAN interface API for fixed bitrates") Acked-by: Max Staudt <max@enpas.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-13octeontx2-vf: Add support for adaptive interrupt coalescingSuman Ghosh1-1/+2
Fixes: 6e144b47f560 (octeontx2-pf: Add support for adaptive interrupt coalescing) Added support for VF interfaces as well. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: smsc95xx: add support for Microchip EVB-LAN8670-USBParthiban Veerasooran1-0/+5
This patch adds support for Microchip's EVB-LAN8670-USB 10BASE-T1S ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pairs. Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13nfp: support 48-bit DMA addressing for NFP3800Yinjun Zhang10-33/+52
48-bit DMA addressing is supported in NFP3800 HW and implemented in NFDK firmware, so enable this feature in driver now. Note that with this change, NFD3 firmware, which doesn't implement 48-bit DMA, cannot be used for NFP3800 any more. RX free list descriptor, used by both NFD3 and NFDK, is also modified to support 48-bit DMA. That's OK because the top bits is always get set to 0 when assigned with 40-bit address. Based on initial work of Jakub Kicinski <jakub.kicinski@netronome.com>. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13xilinx: Fix build on x86.David S. Miller1-4/+4
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: Use iowrite64 to write all 64b descriptor pointersAndy Chiu1-3/+18
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: make the 64b addresable DMA depends on 64b archecturesAndy Chiu2-24/+40
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: derive channel from transactionAlex Elder3-29/+13
In gsi_channel_tx_queued(), we report when a transaction gets passed to hardware. Change that function so it takes transaction rather than a channel as its argument, and derive the channel from the transaction. Rename the function accordingly. Delete the header comments above the function definition; the ones above the declaration in "gsi_private.h" should suffice. In addition, the comments above gsi_channel_tx_update() do a fine job of explaining what's going on. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: determine channel from eventAlex Elder1-5/+21
Each event in an event ring describes the TRE whose completion caused the event. Currently, every event ring is dedicated to a single channel, so the channel is easily derived from the event ring. An event ring can actually be shared by more than one channel though, and to distinguish events for one channel from another, the event structure contains a field indicating which channel the event is associated with. In gsi_event_trans(), use the channel ID in an event to determine which channel the event is for. This makes the channel pointer now passed to that function irrelevant; pass the GSI pointer to that function instead. And although it shouldn't happen, warn if an event arrives that records a channel ID that's not in use, or if the event does not have a transaction associated with it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: simplify endpoint transaction completionAlex Elder1-18/+5
When a GSI transaction completes, ipa_endpoint_trans_complete() is eventually called. That handles TX and RX completions separately, but ipa_endpoint_tx_complete() is a no-op. Instead, have ipa_endpoint_trans_complete() return immediately for a TX transaction, and incorporate code from ipa_endpoint_rx_complete() to handle RX transactions. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: rename endpoint->trans_tre_maxAlex Elder2-4/+4
The trans_tre_max field of the IPA endpoint structure is only used to limit the number of fragments allowed for an SKB being prepared for transmission. Recognizing that, rename the field skb_frag_max, and reduce its value by 1. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: rename channel->tlv_countAlex Elder5-32/+11
Each GSI channel has a TLV FIFO of a certain size, specified in the configuration data for an AP channel. That size dictates the maximum number of TREs that are allowed in a single transaction. The only way that value is used after initialization is as a limit on the number of TREs in a transaction; calling it "tlv_count" isn't helpful, and in fact gsi_channel_trans_tre_max() exists to sort of abstract it. Instead, rename the channel->tlv_count field trans_tre_max, and get rid of the helper function. Update a couple of comments as well. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: ipa: verify command channel TLV countAlex Elder1-12/+27
In commit 8797972afff3d ("net: ipa: remove command info pool"), the maximum number of IPA commands that would be sent in a single transaction was defined. That number can't exceed the size of the TLV FIFO on the command channel, and we can check that at runtime. To add this check, pass a new flag to gsi_channel_data_valid() to indicate the channel being checked is being used for IPA commands. Knowing that we can also verify the channel direction is correct. Use a new local variable that refers to the command-specific portion of the data being checked. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: fix tm port shapping of fibre port is incorrect after driver initializationGuangbin Huang3-4/+10
Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: fix PF rss size initialization bugJie Wang1-1/+3
Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: restore tm priority/qset to default settings when tc disabledGuangbin Huang2-31/+65
Currently, settings parameters of schedule mode, dwrr, shaper of tm priority or qset of one tc are only be set when tc is enabled, they are not restored to the default settings when tc is disabled. It confuses users when they cat tm_priority or tm_qset files of debugfs. So this patch fixes it. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: modify the ring param print infoJie Wang1-1/+1
Currently tx push is also a ring param. So the original ring param print info in hns3_is_ringparam_changed should be adjusted. Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: don't push link state to VF if unaliveJian Shen1-0/+6
It's unnecessary to push link state to unalive VF, and the VF will query link state from PF when it being start works. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: set port base vlan tbl_sta to false before removing old vlanGuangbin Huang1-0/+1
When modify port base vlan, the port base vlan tbl_sta needs to set to false before removing old vlan, to indicate this operation is not finish. Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-11can: etas_es58x: fix signedness of USB RX and TX pipesVincent Mailhol1-2/+2
USB pipes are meant to be unsigned int (c.f. [1]). However, fields rx_pipe and tx_pipe of struct es58x_device are both signed integers. Change the type of those two fields from int to unsigned int. [1] https://elixir.bootlin.com/linux/v5.18/source/include/linux/usb.h#L1571 Link: https://lore.kernel.org/all/20220611162037.1507-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: etas_es58x: replace es58x_device::rx_max_packet_size by usb_maxpacket()Vincent Mailhol2-5/+2
The field rx_max_packet_size of struct es58x_device in nothing else than usb_endpoint_descriptor::wMaxPacketSize and can be easily retrieved using usb_maxpacket(). Also, rx_max_packet_size being used a single time, there is no merit to cache it locally. Remove es58x_device::rx_max_packet_size and rely on usb_maxpacket() instead. Link: https://lore.kernel.org/all/20220611162037.1507-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: skb: drop tx skb if in listen only modeVincent Mailhol1-1/+8
Frames can be directly injected to a can driver via the packet socket. By doing so, it is possible to reach the net_device_ops::ndo_start_xmit function even if the driver is configured in listen only mode. Add a check in can_dropped_invalid_skb() to discard the skb if CAN_CTRLMODE_LISTENONLY is set. Link: https://lore.kernel.org/all/20220610143009.323579-8-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.cVincent Mailhol1-0/+58
The functions can_dropped_invalid_skb() and can_skb_headroom_valid() grew a lot over the years to a point which it does not make much sense to have them defined as static inline in header files. Move those two functions to the .c counterpart of skb.h. can_skb_headroom_valid()'s only caller being can_dropped_invalid_skb(), the declaration is removed from the header. Only can_dropped_invalid_skb() gets its symbol exported. While doing so, do a small cleanup: add brackets around the else block in can_dropped_invalid_skb(). Link: https://lore.kernel.org/all/20220610143009.323579-7-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11net: Kconfig: move the CAN device menu to the "Device Drivers" sectionVincent Mailhol2-0/+3
The devices are meant to be under the "Device Drivers" category of the menuconfig. The CAN subsystem is currently one of the rare exception with all of its devices under the "Networking support" category. The CAN_DEV menuentry gets moved to fix this discrepancy. The CAN menu is added just before MCTP in order to be consistent with the current order under the "Networking support" menu. A dependency on CAN is added to CAN_DEV so that the CAN devices only show up if the CAN subsystem is enabled. Link: https://lore.kernel.org/all/20220610143009.323579-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: Kconfig: add CONFIG_CAN_RX_OFFLOADVincent Mailhol4-1/+8
Only a few drivers rely on the CAN rx offload framework (as of the writing of this patch, only four: flexcan, m_can, mcp251xfd and ti_hecc). Split it out of can-dev and add a new config symbol: CAN_RX_OFFLOAD. The drivers relying on CAN rx offload are in different sub folders. Make CAN_RX_OFFLOAD an hidden option and tag all the drivers depending on that feature with "select CAN_RX_OFFLOAD" so that the option gets automatically enabled if and only if one of those drivers is chosen. Link: https://lore.kernel.org/all/20220610143009.323579-5-mailhol.vincent@wanadoo.fr Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: bittiming: move bittiming calculation functions to calc_bittiming.cVincent Mailhol4-197/+207
The canonical way to select or deselect an object during compilation is to use this pattern in the relevant Makefile: bar-$(CONFIG_FOO) := foo.o bittiming.c instead uses some #ifdef CONFIG_CAN_CALC_BITTIMG. Create a new file named calc_bittiming.c with all the functions which are conditionally compiled with CONFIG_CAN_CALC_BITTIMG and modify the Makefile according to above pattern. Link: https://lore.kernel.org/all/20220610143009.323579-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEVVincent Mailhol4-18/+43
In the next patches, the software/virtual drivers (slcan, v(x)can) will depend on drivers/net/can/dev/skb.o. This patch changes the scope of the can-dev module to include the above mentioned drivers. To do so, we reuse the menu "CAN Device Drivers" and turn it into a configmenu using the config symbol CAN_DEV (which we released in previous patch). Also, add a description to this new CAN_DEV menuconfig. The symbol CAN_DEV now only triggers the build of skb.o. For this reasons, all the macros from linux/module.h are deported from drivers/net/can/dev/dev.c to drivers/net/can/dev/skb.c. Finally, drivers/net/can/dev/Makefile is adjusted accordingly. Link: https://lore.kernel.org/all/20220610143009.323579-3-mailhol.vincent@wanadoo.fr Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: Kconfig: rename config symbol CAN_DEV into CAN_NETLINKVincent Mailhol2-8/+12
In the next patches, the scope of the can-dev module will grow to engloble the software/virtual drivers (slcan, v(x)can). To this extent, release CAN_DEV by renaming it into CAN_NETLINK. The config symbol CAN_DEV will be reused to cover this extended scope. The rationale for the name CAN_NETLINK is that netlink is the predominant feature added here. The current description only mentions platform drivers despite the fact that this symbol is also required by "normal" devices (e.g. USB or PCI) which do not fall under the platform devices category. The description is updated accordingly to fix this gap. Link: https://lore.kernel.org/all/20220610143009.323579-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Max Staudt <max@enpas.org> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callbackMarc Kleine-Budde1-1/+2
Usually CAN devices support configurable bit rates. The limits are defined by struct can_priv::bittiming_const. Another way is to implement the struct can_priv::do_set_bittiming callback. If the bit rate is configured via netlink, the can_changelink() function checks that either can_priv::bittiming_const or struct can_priv::do_set_bittiming is implemented. In commit 431af779256c ("can: dev: add CAN interface API for fixed bitrates") an API for configuring bit rates on CAN interfaces that only support fixed bit rates was added. The supported bit rates are defined by struct can_priv::bitrate_const. However the above mentioned commit forgot to add the struct can_priv::bitrate_const to the check in can_changelink(). In order to avoid to implement a no-op can_priv::do_set_bittiming callback on devices with fixed bit rates, extend the check in can_changelink() accordingly. Link: https://lore.kernel.org/all/20220611144248.3924903-1-mkl@pengutronix.de Fixes: 431af779256c ("can: dev: add CAN interface API for fixed bitrates") Reported-by: Max Staudt <max@enpas.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.