aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-05-04i40e: VF's promiscuous attribute is not keptGrzegorz Siwik1-0/+23
This patch fixes a bug where the promiscuous mode was not being kept when the VF switched to a new VLAN. Now we are config two times a promiscuous mode when we switch VLAN. Without this change when we change VF VLAN we still receive all the packets from previous VLAN and only unicast from new VLAN. Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Disable sniffing VF traffic on PFMichal Swiatkowski1-22/+2
Delete code that add default Tx rule on PF. With this rule PF can see Tx VF traffic that should go outside. For traffic from VF to another VF default Tx rule on PF doesn't apply because of lower priority than VF mac rule. With this change on PF in promisc mode we can see only Rx traffic that doesn't match any other rule (mac etc.). We can't see Tx traffic from other VSI. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Use more efficient structuresJesse Brandeburg1-2/+2
Move a bunch of members around to make more efficient use of memory, eliminating holes where possible. None of these members are hot path so cache line alignment is not very important here. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Use bitfields where possibleJesse Brandeburg1-5/+5
The driver was converted to not use bool, but it was neglected that the bools should have been converted to bit fields as bit fields in software structures are ok, as long as they use the correct kinds of unsigned types. This avoids wasting lots of storage space to store single bit values. One of the change hunks moves a variable lport out of a group of "combinable" bit fields because all bits of the u8 lport are valid and the variable can be packed in the struct in struct holes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Add function to program ethertype based filter rule on VSIsAkeem G Abodunrin4-0/+120
This patch adds function to program VSI with ethertype based filter rule, so that all flow control frames would be disallowed from being transmitted to the client, in order to prevent malicious VSI, especially VF from sending out PAUSE or PFC frames, and then control other VSIs traffic. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Separate if conditions for ice_set_features()Tony Nguyen1-2/+6
Set features can have multiple features turned on|off in a single call. Grouping these all in an if/else means after one condition is met, other conditions/features will not be evaluated. Break the if/else statements by feature to ensure all features will be handled properly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Remove __always_unused attributeTony Nguyen1-1/+1
The variable netdev is being used in this function; remove the __always_unused attribute from it. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Suppress false-positive style issues reported by static analyzerBruce Allan1-0/+1
A recent version of cppcheck falsely reports- Variable ip.hdr is assigned a value that is never used. ip is a union so the pointer ip.hdr is actually used when referenced as ip.v4 and ip.v6. Silence these false reports when using cppcheck with the --inline-suppr command-line option. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Refactor getting/setting coalesceBrett Creeley1-59/+93
Currently if the driver has an uneven amount of Rx/Tx queues setting the coalesce settings through ethtool will result in an error. This is happening because in the setting coalesce flow we are reporting an error if either Rx or Tx fails. Also, the flow for setting/getting per_q_coalesce and setting/getting coalesce settings for the entire device is different. Fix these issues by adding one function, ice_set_q_coalesce(), and another, ice_get_q_coalesce(), that both getting/setting per_q and entire device coalesce can use. This makes handling the error cases generic between the two flows and simplifies __ice_set_coalesce() and __ice_get_coalesce(). Also, add a header comment to __ice_set_coalesce(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Always free/allocate q_vectorsBrett Creeley1-20/+14
Currently when probing/removing the driver we allocate/deallocate each vsi->q_vectors array in ice_vsi_alloc_arrays() and ice_vsi_free_arrays() respectively. However, we don't do this during the reset and VSI rebuild flow. This is inconsistent and unnecessary to have a difference between the two flows. This patch makes the change to always allocate/deallocate the vsi->q_vectors array regardless of the driver flow we are in. Also, update the comment for ice_vsi_free_arrays() to be more descriptive. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Do not unnecessarily initialize local variableBruce Allan1-1/+1
The local variable speed does not need to be initialized and can cause some static analysis tools to complain the initial assigned value is never used. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Add more validation in ice_vc_cfg_irq_map_msgMichal Swiatkowski4-28/+36
Add few checks to validate msg from iavf driver. Test if we have got enough q_vectors allocated in VSI connected with VF. Add masks for itr_indx and msix_indx to avoid writing to reserved fieldi of QINT. Clear q_vector->num_ring_rx/tx, without it we can increment this value every time we send irq map msg from VF. So after second call this value will be incorrect. Decrement num_vectors from msg, because last vector in iavf msg is misc vector (we don't set map for it). Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Don't remove VLAN filters that were never programmedAkeem G Abodunrin2-2/+16
In case of non-trusted VFs, it is possible to program VLAN filter far less than what is requested by the VF originally, thereby makes number of VLAN elements being tracked by VF different from actual VLAN tags. This patch makes sure that we are not attempting to remove VLAN filter that does not exist. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Preserve VLAN Rx stripping settingsTony Nguyen1-0/+4
When Tx insertion is set, we are not accounting for the state of Rx stripping. This causes Rx stripping to be enabled any time Tx insertion is changed, even when it's supposed to be disabled. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Fix for allowing too many MDD events on VFMichal Swiatkowski1-7/+8
Disable VF if any malicious device driver (MDD) event is detected by hardware. Track vf->num_mdd_events for information about VF MDD events. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Use pf instead of vsi-backJesse Brandeburg1-30/+30
Many times in our functions we have a local variable pf, which is equivalent to vsi->back. Just use pf consistently instead of vsi->back where available. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ieee802154: hwsim: unregister hw while hwsim_subscribe_all_others failsYueHaibing1-1/+3
KASAN report this: kernel BUG at net/mac802154/main.c:130! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 0 PID: 19932 Comm: modprobe Not tainted 5.1.0-rc6+ #22 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ieee802154_free_hw+0x2a/0x30 [mac802154] Code: 55 48 8d 57 38 48 89 e5 53 48 89 fb 48 8b 47 38 48 39 c2 75 15 48 8d 7f 48 e8 82 85 16 e1 48 8b 7b 28 e8 f9 ef 83 e2 5b 5d c3 <0f> 0b 0f 1f 40 00 55 48 89 e5 53 48 89 fb 0f b6 86 80 00 00 00 88 RSP: 0018:ffffc90001c7b9f0 EFLAGS: 00010206 RAX: ffff88822df3aa80 RBX: ffff88823143d5c0 RCX: 0000000000000002 RDX: ffff88823143d5f8 RSI: ffff88822b1fabc0 RDI: ffff88823143d5c0 RBP: ffffc90001c7b9f8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4 R13: ffff88822dea4f50 R14: ffff88823143d7c0 R15: 00000000fffffff4 FS: 00007ff52e999540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdc06dba768 CR3: 000000023160a000 CR4: 00000000000006f0 Call Trace: hwsim_add_one+0x2dd/0x540 [mac802154_hwsim] hwsim_probe+0x2f/0xb0 [mac802154_hwsim] platform_drv_probe+0x3a/0x90 ? driver_sysfs_add+0x79/0xb0 really_probe+0x1d4/0x2d0 driver_probe_device+0x50/0xf0 device_driver_attach+0x54/0x60 __driver_attach+0x7e/0xd0 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x68/0xc0 driver_attach+0x19/0x20 bus_add_driver+0x15e/0x200 driver_register+0x5b/0xf0 __platform_driver_register+0x31/0x40 hwsim_init_module+0x74/0x1000 [mac802154_hwsim] ? 0xffffffffa00e9000 do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff52e4a2839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffffa7b3c08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005647560a2a00 RCX: 00007ff52e4a2839 RDX: 0000000000000000 RSI: 00005647547f3c2e RDI: 0000000000000003 RBP: 00005647547f3c2e R08: 0000000000000000 R09: 00005647560a2a00 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005647560a2c10 R14: 0000000000040000 R15: 00005647560a2a00 Modules linked in: mac802154_hwsim(+) mac802154 [last unloaded: mac802154_hwsim] In hwsim_add_one, if hwsim_subscribe_all_others fails, we should call ieee802154_unregister_hw to free resources. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-05-04ieee802154: hwsim: Fix error handle path in hwsim_init_moduleYueHaibing1-2/+2
KASAN report this: BUG: unable to handle kernel paging request at fffffbfff834f001 PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c968d067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 8871 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328 Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246 RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503 RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008 RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195 R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008 R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000 FS: 00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: genl_family_find_byname+0x7f/0xf0 net/netlink/genetlink.c:104 genl_register_family+0x1e1/0x1070 net/netlink/genetlink.c:333 ? 0xffffffffc1978000 hwsim_init_module+0x6a/0x1000 [mac802154_hwsim] ? 0xffffffffc1978000 ? 0xffffffffc1978000 ? 0xffffffffc1978000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcc02fec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcc02fec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdcc02ff6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: mac802154_hwsim(+) mac802154 ieee802154 speakup(C) rc_proteus_2309 rtc_rk808 streebog_generic rds vboxguest madera_spi madera da9052_wdt mISDN_core ueagle_atm usbatm atm ir_imon_decoder scsi_transport_sas rc_dntv_live_dvb_t panel_samsung_s6d16d0 drm drm_panel_orientation_quirks lib80211 fb_agm1264k_fl(C) gspca_pac7302 gspca_main videobuf2_v4l2 soundwire_intel_init i2c_dln2 dln2 usbcore hid_gaff 88pm8607 nfnetlink axp20x_i2c axp20x uio pata_marvell pmbus_core snd_sonicvibes gameport snd_pcm snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore rtc_ds1511 rtc_ds1742 vsock dwc_xlgmac rtc_rx8010 libphy twofish_x86_64_3way twofish_x86_64 twofish_common ad5696_i2c ad5686 lp8788_charger cxd2880_spi dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops fbtft(C) sysimgblt sysfillrect syscopyarea fb_sys_fops janz_ican3 firewire_net firewire_core crc_itu_t spi_slave_system_control i2c_matroxfb i2c_algo_bit matroxfb_base fb fbdev matroxfb_DAC1064 matroxfb_accel cfbcopyarea cfbimgblt cfbfillrect matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc leds_blinkm ti_dac7311 intel_spi_pci intel_spi spi_nor hid_elan hid async_tx rc_cinergy_1400 rc_core intel_ishtp kxcjk_1013 industrialio_triggered_buffer kfifo_buf can_dev intel_th spi_pxa2xx_platform pata_artop vme_ca91cx42 gb_gbphy(C) greybus(C) industrialio mptbase st_drv cmac ttpci_eeprom via_wdt gpio_xra1403 mtd iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 input_leds crypto_simd cryptd glue_helper ide_pci_generic piix psmouse ide_core serio_raw ata_generic i2c_piix4 pata_acpi parport_pc parport floppy rtc_cmos intel_agp intel_gtt agpgart sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: speakup] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff834f001 ---[ end trace 5aa772c793e0e971 ]--- RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328 Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246 RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503 RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008 RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195 R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008 R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000 FS: 00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 The error handing path misplace the cleanup in hwsim_init_module, switch the two cleanup functions to fix above issues. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-05-04r8169: remove rtl_write_exgmac_batchHeiner Kallweit1-22/+4
rtl_write_exgmac_batch is used in only one place, so we can remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: spectrum: split base on local_ports_in_{1x, 2x} resourcesShalom Toledo1-11/+35
When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: resources: Add local_ports_in_{1x, 2x}Shalom Toledo1-0/+4
Since the number of local ports in 4x changed between SPC and SPC-2, firmware expose new resources that the driver can query. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: Bump firmware version to 13.2000.1122Ido Schimmel1-2/+2
The new version supports two features that are required by upcoming changes in the driver: * Querying of new resources allowing port split into two ports on Spectrum-2 systems * Querying of number of gearboxes on supported systems such as SN3800 Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve resuming from hibernationHeiner Kallweit1-6/+1
I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit3-9/+31
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge tag 'mlx5-updates-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller29-531/+959
Saeed Mahameed says: ==================== mlx5-updates-2019-04-30 mlx5 misc updates: 1) Bodong Wang and Parav Pandit (6): - Remove unused mlx5_query_nic_vport_vlans - vport macros refactoring - Fix vport access in E-Switch - Use atomic rep state to serialize state change 2) Eli Britstein (2): - prio tag mode support, added ACLs and replace TC vlan pop with vlan 0 rewrite when prio tag mode is enabled. 3) Erez Alfasi (2): - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions - mlx5e: ethtool, Add support for EEPROM high pages query 4) Masahiro Yamada (1): - remove meaningless CFLAGS_tracepoint.o 5) Maxim Mikityanskiy (1): - Put the common XDP code into a function 6) Tariq Toukan (2): - Turn on HW tunnel offload in all TIRs 7) Vlad Buslov (1): - Return error when trying to insert existing flower filter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller14-208/+448
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-05-02 This series contains updates to the ice driver only. Anirudh introduces the framework to store queue specific information in the VSI queue contexts. This will allow future changes to update the structure to hold queue specific information. Akeem adds additional check so that if there is no queue to disable when attempting to disable a queue, return a configuration error without acquiring the lock. Fixed an issue with non-trusted VFs being able to add more than the permitted number of VLANs. Bruce removes unreachable code and updated the function to return void since it would never return anything but success. Brett provides most of the changes in the series, starting with reducing the scope of the error variable used and improved the debug message if we fail to configure the receive queue. Updates the driver to use a macro instead of using the same 'for' loop throughout the driver which helps with readability. Fixed an issue where users were led to believe they could set rx-usecs-high value, yet the changes to this value would not stick because it was not yet implemented to allow changes to this value, so implement the missing code to change the value. Found we had unnecessary wait when disabling queues, so remove it. I,proved a wasteful addition operation in our hot path by adding a member to the ice_q_vector structure and the necessary changes to use the member which stores the calculated vector hardware index. Refactored the link event flow to make it cleaner and more clear. Maciej updates the array index when stopping transmit rings, so that process every ring the VSI, not just the rings in a given transmit class. Paul adds support for setting 52 byte RSS hash keys. Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register, since the interrupt handlers will handle resetting the bit, if necessary. Tony adds a missing PHY type, which was causing warning message about an unrecognized PHY. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: gcc 8: fix compilation warningSameeh Jubran1-1/+1
GCC 8 contains a number of new warnings as well as enhancements to existing checkers. The warning - Wstringop-truncation - warns for calls to bounded string manipulation functions such as strncat, strncpy, and stpncpy that may either truncate the copied string or leave the destination unchanged. In our case the destination string length (32 bytes) is much shorter than the source string (64 bytes) which causes this warning to show up. In general the destination has to be at least a byte larger than the length of the source string with strncpy for this warning not to showup. This can be easily fixed by using strlcpy instead which already does the truncation to the string. Documentation for this function can be found here: https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141 Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix ena_com_fill_hash_function() implementationSameeh Jubran1-0/+1
ena_com_fill_hash_function() didn't configure the rss->hash_func. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: improve latency by disabling adaptive interrupt moderation by defaultSameeh Jubran1-1/+5
Adaptive interrupt moderation was erroneously enabled by default in the driver. In case the device supports adaptive interrupt moderation it will be automatically used, which may potentially increase latency. The adaptive moderation can be enabled from ethtool command in case the feature is supported by the device. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Guy Tzalik <gtzalik@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix return value of ena_com_config_llq_info()Sameeh Jubran1-1/+1
ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails. Return the failure code of ena_com_set_llq() in case it fails. fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix incorrect test of supported hash functionSameeh Jubran1-1/+1
ena_com_set_hash_function() tests if a hash function is supported by the device before setting it. The test returns the opposite result than needed. Reverse the condition to return the correct value. Also use the BIT macro instead of inline shift. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: Free napi resources when ena_up() failsSameeh Jubran1-0/+1
ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up(). Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: set freed objects to NULL to avoid failing future allocationsSameeh Jubran1-10/+15
In some cases when a queue related allocation fails, successful past allocations are freed but the pointer that pointed to them is not set to NULL. This is a problem for 2 reasons: 1. This is generally a bad practice since this pointer might be accidentally accessed in the future. 2. Future allocations using the same pointer check if the pointer is NULL and fail if it is not. Fixed this by setting such pointers to NULL in the allocation of queue related objects. Also refactored the code of ena_setup_tx_resources() to goto-style error handling to avoid code duplication of resource freeing. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entrySameeh Jubran1-2/+2
second parameter should be the index of the table rather than the value. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Saeed Bshara <saeedb@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04wimax/i2400m: use struct_size() helperGustavo A. R. Silva1-2/+1
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]); with: struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls)); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for FEC encoding controlJian Shen5-1/+213
This patch adds support for FEC encoding control, user can change FEC mode by command ethtool --set-fec, and get FEC mode by command ethtool --show-fec. The fec capability is changed follow the port speed. If autoneg on, the user configure fec mode will be overwritten by autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add autoneg and change speed support for fibre portJian Shen3-11/+163
Previously, our driver only supports phydev to autoneg or change port speed. This patch adds support for fibre port, driver gets media speed capability and autoneg capability from firmware. If the media supports multiple speeds, user can change port speed with command "ethtool -s <devname> speed xxxx autoneg off duplex full". If autoneg on, the user configuration may be overwritten by the autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for multiple media typeJian Shen8-63/+246
Previously, we can only identify copper and fiber type, the supported link modes of port information are always showing SR type. This patch adds support for multiple media types, include SR, LR CR, KR. Driver needs to query the media type from firmware periodicly, and updates the port information. The new port information looks like this: Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 25000baseCR/Full 25000baseSR/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Supported FEC modes: None BaseR Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Current message level: 0x00000036 (54) probe link ifdown ifup Link detected: yes In order to be compatible with old firmware which only support sfp speed, we remained using the same query command, and kept the former logic. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03usbnet: ipheth: Remove unnecessary NULL pointer checkGuenter Roeck1-2/+0
ipheth_carrier_set() is called from two locations. In ipheth_carrier_check_work(), its parameter 'dev' is set with container_of(work, ...) and can not be NULL. In ipheth_open(), dev is extracted from netdev_priv(net) and dereferenced before the call to ipheth_carrier_set(). The NULL pointer check of dev in ipheth_carrier_set() is therefore unnecessary and can be removed. Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Pass interrupt number in platform dataAndrew Lunn1-4/+9
Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa :mv88e6xxx: Disable unused portsAndrew Lunn1-1/+11
If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with all ports enable. Ports which are then actively used are reconfigured as required when the driver starts. However unused ports are left alone. Change this to disable them, and turn off any SERDES interface. This could save some power and so reduce the temperature a bit. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Set STP disable state in port_disableAndrew Lunn1-0/+3
When requested to disable a port, set the port STP state to disabled. This fully disables the port and should save some power. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03hv_netvsc: fix race that may miss tx queue wakeupHaiyang Zhang1-6/+9
When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03parisc: Tune LASI LAN for QEMUHelge Deller1-2/+3
Do not loose cycles when we run on QEMU, and fix one trivial typo. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03i40e: Introduce recovery mode supportAlice Michael3-30/+293
This patch introduces "recovery mode" to the i40e driver. It is part of a new Any2Any idea of upgrading the firmware. In this approach, it is required for the driver to have support for "transition firmware", that is used for migrating from structured to flat firmware image. In this new, very basic mode, i40e driver must be able to handle particular IOCTL calls from the NVM Update Tool and run a small set of AQ commands. These additional AQ commands are part of the interface used by the NVMUpdate tool. The NVMUpdate tool contains all of the necessary logic to reference these new AQ commands. The end user experience remains the same, they are using the NVMUpdate tool to update the NVM contents. Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: print PCI vendor and device ID during probeStefan Assmann1-3/+4
Printing each devices PCI vendor and device ID has the advantage of easily revealing what hardware we're dealing with exactly. It's no longer necessary to match the PCI bus information to the lspci output. Helps with bug reports where no lspci output is available. Output before i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 and after i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy1-12/+16
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: update version numberAlice Michael1-1/+1
Just bumping the version number appropriately. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove out-of-range comparisons in i40e_validate_cloud_filterJacob Keller1-2/+2
The function i40e_validate_cloud_filter checks that the destination and source port numbers are valid by attempting to ensure that the number is non-zero and no larger than 0xFFFF. However, the types for the dst_port and src_port variable are __be16 which by definition cannot be larger than 0xFFFF Since these values cannot be larger than 2 bytes, the check to see if they exceed 0xFFFF is meaningless. One might consider these checks as some sort of defensive coding, in case the type was later changed. However, these checks also byte-swap the value before comparison using be16_to_cpu, which will truncate the values to 16bits anyways. Additionally, changing the type would require updating the opcodes to support new data layout of these virtchnl commands. Remove the check to silence the -Wtype-limits warning that was added to GCC 8. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov8-13/+93
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.