aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-05-17net/mlx5: sparse: error: context imbalance in 'mlx5_vf_get_core_dev'Saeed Mahameed1-2/+0
Removing the annotation resolves the issue for some reason. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Drain fw_reset when removing deviceShay Drory3-3/+27
In case fw sync reset is called in parallel to device removal, device might stuck in the following deadlock: CPU 0 CPU 1 ----- ----- remove_one uninit_one (locks intf_state_mutex) mlx5_sync_reset_now_event() work in fw_reset->wq. mlx5_enter_error_state() mutex_lock (intf_state_mutex) cleanup_once fw_reset_cleanup() destroy_workqueue(fw_reset->wq) Drain the fw_reset WQ, and make sure no new work is being queued, before entering uninit_one(). The Drain is done before devlink_unregister() since fw_reset, in some flows, is using devlink API devlink_remote_reload_actions_performed(). Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: CT: Fix setting flow_source for smfs ct tuplesPaul Blakey1-1/+1
Cited patch sets flow_source to ANY overriding the provided spec flow_source, avoiding the optimization done by commit c9c079b4deaa ("net/mlx5: CT: Set flow source hint from provided tuple device"). To fix the above, set the dr_rule flow_source from provided flow spec. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: CT: Fix support for GRE tuplesPaul Blakey1-24/+32
cited commit removed support for GRE tuples when software steering was enabled. To bring back support for GRE tuples, add GRE ipv4/ipv6 matchers. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Remove HW-GRO from reported featuresGal Pressman1-4/+0
We got reports of certain HW-GRO flows causing kernel call traces, which might be related to firmware. To be on the safe side, disable the feature for now and re-enable it once a driver/firmware fix is found. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Properly block HW GRO when XDP is enabledMaxim Mikityanskiy1-0/+12
HW GRO is incompatible and mutually exclusive with XDP and XSK. However, the needed checks are only made when enabling XDP. If HW GRO is enabled when XDP is already active, the command will succeed, and XDP will be skipped in the data path, although still enabled. This commit fixes the bug by checking the XDP and XSK status in mlx5e_fix_features and disabling HW GRO if XDP is enabled. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Properly block LRO when XDP is enabledMaxim Mikityanskiy1-0/+7
LRO is incompatible and mutually exclusive with XDP. However, the needed checks are only made when enabling XDP. If LRO is enabled when XDP is already active, the command will succeed, and XDP will be skipped in the data path, although still enabled. This commit fixes the bug by checking the XDP status in mlx5e_fix_features and disabling LRO if XDP is enabled. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Block rx-gro-hw feature in switchdev modeAya Levin1-0/+4
When the driver is in switchdev mode and rx-gro-hw is set, the RQ needs special CQE handling. Till then, block setting of rx-gro-hw feature in switchdev mode, to avoid failure while setting the feature due to failure while opening the RQ. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5e: Wrap mlx5e_trap_napi_poll into rcu_read_lockMaxim Mikityanskiy1-3/+10
The body of mlx5e_napi_poll is wrapped into rcu_read_lock to be able to read the XDP program pointer using rcu_dereference. However, the trap RQ NAPI doesn't use rcu_read_lock, because the trap RQ works only in the non-linear mode, and mlx5e_skb_from_cqe_nonlinear, until recently, didn't support XDP and didn't call rcu_dereference. Starting from the cited commit, mlx5e_skb_from_cqe_nonlinear supports XDP and calls rcu_dereference, but mlx5e_trap_napi_poll doesn't wrap it into rcu_read_lock. It leads to RCU-lockdep warnings like this: WARNING: suspicious RCU usage This commit fixes the issue by adding an rcu_read_lock to mlx5e_trap_napi_poll, similarly to mlx5e_napi_poll. Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: DR, Ignore modify TTL on RX if device doesn't support itYevgeny Kliteynik2-21/+48
When modifying TTL, packet's csum has to be recalculated. Due to HW issue in ConnectX-5, csum recalculation for modify TTL on RX is supported through a work-around that is specifically enabled by configuration. If the work-around isn't enabled, rather than adding an unsupported action the modify TTL action on RX should be ignored. Ignoring modify TTL action might result in zero actions, so in such cases we will not convert the match STE to modify STE, as it is done by FW in DMFS. This patch fixes an issue where modify TTL action was ignored both on RX and TX instead of only on RX. Fixes: 4ff725e1d4ad ("net/mlx5: DR, Ignore modify TTL if device doesn't support it") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: Initialize flow steering during driver probeShay Drory3-61/+91
Currently, software objects of flow steering are created and destroyed during reload flow. In case a device is unloaded, the following error is printed during grace period: mlx5_core 0000:00:0b.0: mlx5_fw_fatal_reporter_err_work:690:(pid 95): Driver is in error state. Unloading As a solution to fix use-after-free bugs, where we try to access these objects, when reading the value of flow_steering_mode devlink param[1], let's split flow steering creation and destruction into two routines: * init and cleanup: memory, cache, and pools allocation/free. * create and destroy: namespaces initialization and cleanup. While at it, re-order the cleanup function to mirror the init function. [1] Kasan trace: [ 385.119849 ] BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] Read of size 4 at addr ffff888104b79308 by task bash/291 [ 385.119849 ] [ 385.119849 ] CPU: 1 PID: 291 Comm: bash Not tainted 5.17.0-rc1+ #2 [ 385.119849 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 [ 385.119849 ] Call Trace: [ 385.119849 ] <TASK> [ 385.119849 ] dump_stack_lvl+0x6e/0x91 [ 385.119849 ] print_address_description.constprop.0+0x1f/0x160 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] kasan_report.cold+0x83/0xdf [ 385.119849 ] ? devlink_param_notify+0x20/0x190 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] devlink_nl_param_fill+0x18a/0xa50 [ 385.119849 ] ? _raw_spin_lock_irqsave+0x8d/0xe0 [ 385.119849 ] ? devlink_flash_update_timeout_notify+0xf0/0xf0 [ 385.119849 ] ? __wake_up_common+0x4b/0x1e0 [ 385.119849 ] ? preempt_count_sub+0x14/0xc0 [ 385.119849 ] ? _raw_spin_unlock_irqrestore+0x28/0x40 [ 385.119849 ] ? __wake_up_common_lock+0xe3/0x140 [ 385.119849 ] ? __wake_up_common+0x1e0/0x1e0 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp8+0x27/0x80 [ 385.119849 ] ? __rcu_read_unlock+0x48/0x70 [ 385.119849 ] ? kasan_unpoison+0x23/0x50 [ 385.119849 ] ? __kasan_slab_alloc+0x2c/0x80 [ 385.119849 ] ? memset+0x20/0x40 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp4+0x25/0x80 [ 385.119849 ] devlink_param_notify+0xce/0x190 [ 385.119849 ] devlink_unregister+0x92/0x2b0 [ 385.119849 ] remove_one+0x41/0x140 [ 385.119849 ] pci_device_remove+0x68/0x140 [ 385.119849 ] ? pcibios_free_irq+0x10/0x10 [ 385.119849 ] __device_release_driver+0x294/0x3f0 [ 385.119849 ] device_driver_detach+0x82/0x130 [ 385.119849 ] unbind_store+0x193/0x1b0 [ 385.119849 ] ? subsys_interface_unregister+0x270/0x270 [ 385.119849 ] drv_attr_store+0x4e/0x70 [ 385.119849 ] ? drv_attr_show+0x60/0x60 [ 385.119849 ] sysfs_kf_write+0xa7/0xc0 [ 385.119849 ] kernfs_fop_write_iter+0x23a/0x2f0 [ 385.119849 ] ? sysfs_kf_bin_read+0x160/0x160 [ 385.119849 ] new_sync_write+0x311/0x430 [ 385.119849 ] ? new_sync_read+0x480/0x480 [ 385.119849 ] ? _raw_spin_lock+0x87/0xe0 [ 385.119849 ] ? __sanitizer_cov_trace_cmp4+0x25/0x80 [ 385.119849 ] ? security_file_permission+0x94/0xa0 [ 385.119849 ] vfs_write+0x4c7/0x590 [ 385.119849 ] ksys_write+0xf6/0x1e0 [ 385.119849 ] ? __x64_sys_read+0x50/0x50 [ 385.119849 ] ? fpregs_assert_state_consistent+0x99/0xa0 [ 385.119849 ] do_syscall_64+0x3d/0x90 [ 385.119849 ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 385.119849 ] RIP: 0033:0x7fc36ef38504 [ 385.119849 ] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 385.119849 ] RSP: 002b:00007ffde0ff3d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 385.119849 ] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc36ef38504 [ 385.119849 ] RDX: 000000000000000c RSI: 00007fc370521040 RDI: 0000000000000001 [ 385.119849 ] RBP: 00007fc370521040 R08: 00007fc36f00b8c0 R09: 00007fc36ee4b740 [ 385.119849 ] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc36f00a760 [ 385.119849 ] R13: 000000000000000c R14: 00007fc36f005760 R15: 000000000000000c [ 385.119849 ] </TASK> [ 385.119849 ] [ 385.119849 ] Allocated by task 65: [ 385.119849 ] kasan_save_stack+0x1e/0x40 [ 385.119849 ] __kasan_kmalloc+0x81/0xa0 [ 385.119849 ] mlx5_init_fs+0x11b/0x1160 [ 385.119849 ] mlx5_load+0x13c/0x220 [ 385.119849 ] mlx5_load_one+0xda/0x160 [ 385.119849 ] mlx5_recover_device+0xb8/0x100 [ 385.119849 ] mlx5_health_try_recover+0x2f9/0x3a1 [ 385.119849 ] devlink_health_reporter_recover+0x75/0x100 [ 385.119849 ] devlink_health_report+0x26c/0x4b0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work+0x11e/0x1b0 [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] Freed by task 65: [ 385.275909 ] kasan_save_stack+0x1e/0x40 [ 385.275909 ] kasan_set_track+0x21/0x30 [ 385.275909 ] kasan_set_free_info+0x20/0x30 [ 385.275909 ] __kasan_slab_free+0xfc/0x140 [ 385.275909 ] kfree+0xa5/0x3b0 [ 385.275909 ] mlx5_unload+0x2e/0xb0 [ 385.275909 ] mlx5_unload_one+0x86/0xb0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work.cold+0xca/0xcf [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] The buggy address belongs to the object at ffff888104b79300 [ 385.275909 ] which belongs to the cache kmalloc-128 of size 128 [ 385.275909 ] The buggy address is located 8 bytes inside of [ 385.275909 ] 128-byte region [ffff888104b79300, ffff888104b79380) [ 385.275909 ] The buggy address belongs to the page: [ 385.275909 ] page:00000000de44dd39 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x104b78 [ 385.275909 ] head:00000000de44dd39 order:1 compound_mapcount:0 [ 385.275909 ] flags: 0x8000000000010200(slab|head|zone=2) [ 385.275909 ] raw: 8000000000010200 0000000000000000 dead000000000122 ffff8881000428c0 [ 385.275909 ] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 385.275909 ] page dumped because: kasan: bad access detected [ 385.275909 ] [ 385.275909 ] Memory state around the buggy address: [ 385.275909 ] ffff888104b79200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc [ 385.275909 ] ffff888104b79280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] >ffff888104b79300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ] ^ [ 385.275909 ] ffff888104b79380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] ffff888104b79400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ]] Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17net/mlx5: DR, Fix missing flow_source when creating multi-destination FW tableMaor Dickman5-6/+14
In order to support multiple destination FTEs with SW steering FW table is created with single FTE with multiple actions and SW steering rule forward to it. When creating this table, flow source isn't set according to the original FTE. Fix this by passing the original FTE flow source to the created FW table. Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-17octeontx2-pf: Add support for adaptive interrupt coalescingSuman Ghosh7-8/+99
Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate. Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20220517044055.876158-1-sumang@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: smc911x: replace ternary operator with min()Guo Zhengkui1-1/+1
Fix the following coccicheck warning: drivers/net/ethernet/smsc/smc911x.c:483:20-22: WARNING opportunity for min() Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220516115627.66363-1-guozhengkui@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: thunderx: remove null check after call container_of()Haowen Bai1-3/+0
container_of() will never return NULL, so remove useless code. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1652696212-17516-1-git-send-email-baihaowen@meizu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17octeontx2-pf: Use memset_startat() helper in otx2_stop()Xiu Jianfeng1-2/+1
Use memset_startat() helper to simplify the code, there is no functional change in this patch. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220516092337.131653-1-xiujianfeng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net/qla3xxx: Fix a test in ql_reset_work()Christophe JAILLET1-1/+2
test_bit() tests if one bit is set or not. Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit QL_RESET_START (i.e. 3) is set. In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say QL_ADAPTER_UP. This looks harmless, because this bit is likely be set, and when the ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set. This has been spotted by smatch. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17ice: Fix interrupt moderation settings getting clearedMichal Wilczynski2-11/+16
Adaptive-rx and Adaptive-tx are interrupt moderation settings that can be enabled/disabled using ethtool: ethtool -C ethX adaptive-rx on/off adaptive-tx on/off Unfortunately those settings are getting cleared after changing number of queues, or in ethtool world 'channels': ethtool -L ethX rx 1 tx 1 Clearing was happening due to introduction of bit fields in ice_ring_container struct. This way only itr_setting bits were rebuilt during ice_vsi_rebuild_set_coalesce(). Introduce an anonymous struct of bitfields and create a union to refer to them as a single variable. This way variable can be easily saved and restored. Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-17ice: fix possible under reporting of ethtool Tx and Rx statisticsPaul Greenwalt1-3/+4
The hardware statistics counters are not cleared during resets so the drivers first access is to initialize the baseline and then subsequent reads are for reporting the counters. The statistics counters are read during the watchdog subtask when the interface is up. If the baseline is not initialized before the interface is up, then there can be a brief window in which some traffic can be transmitted/received before the initial baseline reading takes place. Directly initialize ethtool statistics in driver open so the baseline will be initialized when the interface is up, and any dropped packets incremented before the interface is up won't be reported. Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init") Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-17ice: fix crash when writing timestamp on RX ringsArkadiusz Kubalewski1-4/+15
Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Dave Cain <dcain@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-17rtw89: pci: only mask out INT indicator register for disable interrupt v1Ping-Ke Shih1-3/+0
The design of INT indicator register (R_AX_PCIE_HIMR00_V1) is to reduce IO during frequent interrupts, because it can stop chip sending interrupt to host if we just set this indicator to 0, not all IMR(s). This indicator register looks like a root interrupt controller of wifi chip. However, we can't set all other IMR(s) to 0 during we are running on interrupt service routine, or the indicator register can't reflect the status of certain interrupt happened during this period, and then miss some interrupts especially SER interrupt events. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-7-pkshih@realtek.com
2022-05-17rtw89: convert rtw89_band to nl80211_band preciselyZong-Zhe Yang4-11/+29
Before 6 GHz band was supported, i.e. only 2 GHz and 5 GHz, they were the same from the numerical point of view. However, after 6 GHz band support, we need to do this conversion logically. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-6-pkshih@realtek.com
2022-05-17rtw89: 8852c: update txpwr tables to HALRF_027_00_052Zong-Zhe Yang1-1857/+1857
Update notes: update the following to HALRF_027_00_052 TX power by rate table TX power limit table TX power limit RU table TX shape table doesn't seem to be changed on HALRF_027_00_052 Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-5-pkshih@realtek.com
2022-05-17rtw89: cfo: check mac_id to avoid out-of-boundsPing-Ke Shih1-0/+5
Somehow, hardware reports incorrect mac_id and pollute memory. Check index before we access the array. UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23 index 188 is out of range for type 's32 [64]' CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE Call Trace: <IRQ> show_stack+0x52/0x58 dump_stack_lvl+0x4c/0x63 dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_out_of_bounds.cold+0x44/0x49 ? __alloc_skb+0x92/0x1d0 rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core] rtw89_core_rx+0x261/0x871 [rtw89_core] ? __alloc_skb+0xee/0x1d0 rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci] __napi_poll+0x33/0x1a0 net_rx_action+0x126/0x260 ? __queue_work+0x217/0x4c0 __do_softirq+0xd9/0x315 ? disable_irq_nosync+0x10/0x10 do_softirq.part.0+0x6d/0x90 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci] irq_thread_fn+0x28/0x60 irq_thread+0xc8/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x16b/0x190 ? irq_thread_check_affinity+0xe0/0xe0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-4-pkshih@realtek.com
2022-05-17rtw89: 8852c: set TX antenna pathPing-Ke Shih1-4/+5
To make user space can set TX antenna via iw command. Then, we can diagnose antenna is connected properly or not, and measure TX power in single path. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-3-pkshih@realtek.com
2022-05-17rtw89: add ieee80211::sta_rc_update opsPing-Ke Shih3-5/+22
When peer's NSS, rate or bandwidth is changed, we update RA(rate adaptive) mask to ensure transmitting packets properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220516005215.5878-2-pkshih@realtek.com
2022-05-17wireless: Fix Makefile to be in alphabetical orderSrinivasan R1-1/+1
Fix quantenna to be in the right order Signed-off-by: Srinivasan R <srinir@outlook.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/MA1PR01MB26992E104B006B340C3C3A84C1CA9@MA1PR01MB2699.INDPRD01.PROD.OUTLOOK.COM
2022-05-17net: phy: marvell: Add errata section 5.1 for Alaska PHYLeszek Polak1-0/+37
As per Errata Section 5.1, if EEE is intended to be used, some register writes must be done once after every hardware reset. This patch now adds the necessary register writes as listed in the Marvell errata. Without this fix we experience ethernet problems on some of our boards equipped with a new version of this ethernet PHY (different supplier). The fix applies to Marvell Alaska 88E1510/88E1518/88E1512/88E1514 Rev. A0. Signed-off-by: Leszek Polak <lpolak@arri.de> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220516070859.549170-1-sr@denx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: qede: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-1/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516082251.1651350-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: vxge: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-2/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516081914.1651281-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17qed: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-1/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516072646.1651109-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()Zixuan Fu1-0/+4
In vmxnet3_rq_create(), when dma_alloc_coherent() fails, vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all() -> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls vmxnet3_force_close() -> dev_close() in error handling code. And the driver calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all() -> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(), rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing a NULL pointer dereference. To fix this possible bug, an if statement is added to check whether rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so. The error log in our fault-injection testing is shown as follows: [ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3] ... [ 65.227977] Call Trace: ... [ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3] [ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3] [ 65.228866] __dev_close_many+0x288/0x350 [ 65.229607] dev_close_many+0xa4/0x480 [ 65.231124] dev_close+0x138/0x230 [ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3] [ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3] ... Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()Zixuan Fu1-0/+2
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is freed immediately. Similarly, in another branch, when dma_map_page() fails, rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf() returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all() -> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs. To fix these possible bugs, rbi->skb and rbi->page should be cleared after they are freed. The error log in our fault-injection testing is shown as follows: [ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150 ... [ 14.321586] Call Trace: ... [ 14.325357] consume_skb+0x2f/0x150 [ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3] [ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3] [ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.361675] Allocated by task 351: ... [ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0 [ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3] [ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.367309] [ 14.367412] Freed by task 351: ... [ 14.368932] __dev_kfree_skb_any+0xd2/0xe0 [ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3] [ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3] [ 14.370174] __dev_open+0x28a/0x420 [ 14.370399] __dev_change_flags+0x192/0x590 [ 14.370667] dev_change_flags+0x7a/0x180 [ 14.370919] do_setlink+0xb28/0x3570 [ 14.371150] rtnl_newlink+0x1160/0x1740 [ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50 [ 14.371661] netlink_rcv_skb+0x1cd/0x3e0 [ 14.371913] netlink_unicast+0x5dc/0x840 [ 14.372169] netlink_sendmsg+0x856/0xc40 [ 14.372420] ____sys_sendmsg+0x8a7/0x8d0 [ 14.372673] __sys_sendmsg+0x1c2/0x270 [ 14.372914] do_syscall_64+0x41/0x90 [ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae ... Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Zixuan Fu <r33s3n6@gmail.com> Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net/mlxbf_gige: use eth_zero_addr() to clear mac addressLu Wei1-1/+1
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Lu Wei <luwei32@huawei.com> Link: https://lore.kernel.org/r/20220516033343.329178-1-luwei32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17ethernet/ti: delete if NULL check befort devm_kfreeBernard Zhao1-9/+4
devm_kfree check the pointer, there is no need to check before devm_kfree call. This change is to cleanup the code a bit. Signed-off-by: Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/20220516015208.6526-1-bernard@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: systemport: Fix an error handling path in bcm_sysport_probe()Christophe JAILLET1-2/+4
if devm_clk_get_optional() fails, we still need to go through the error handling path. Add the missing goto. Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-17net: lan966x: Fix assignment of the MAC addressHoratiu Vultur1-0/+28
The following two scenarios were failing for lan966x. 1. If the port had the address X and then trying to assign the same address, then the HW was just removing this address because first it tries to learn new address and then delete the old one. As they are the same the HW remove it. 2. If the port eth0 was assigned the same address as one of the other ports eth1 then when assigning back the address to eth0 then the HW was deleting the address of eth1. The case 1. is fixed by checking if the port has already the same address while case 2. is fixed by checking if the address is used by any other port. Fixes: e18aba8941b40b ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220513180030.3076793-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-16net: ethernet: Fix unmet direct dependencies detected for NVMEM_SUNPLUS_OCOTPWells Lu1-3/+0
Removed unnecessary: select COMMON_CLK_SP7021 select RESET_SUNPLUS select NVMEM_SUNPLUS_OCOTP from Kconfig. Reported-by: kernel test robot <yujie.liu@intel.com> Signed-off-by: Wells Lu <wellslutw@gmail.com> Link: https://lore.kernel.org/r/1652443036-24731-1-git-send-email-wellslutw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16Merge tag 'linux-can-next-for-5.19-20220516' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextJakub Kicinski2-5/+5
Marc Kleine-Budde says: ==================== pull-request: can-next 2022-05-16 the first 2 patches are by me and target the CAN raw protocol. The 1st removes an unneeded assignment, the other one adds support for SO_TXTIME/SCM_TXTIME. Oliver Hartkopp contributes 2 patches for the ISOTP protocol. The 1st adds support for transmission without flow control, the other let's bind() return an error on incorrect CAN ID formatting. Geert Uytterhoeven contributes a patch to clean up ctucanfd's Kconfig file. Vincent Mailhol's patch for the slcan driver uses the proper function to check for invalid CAN frames in the xmit callback. The next patch is by Geert Uytterhoeven and makes the interrupt-names of the renesas,rcar-canfd dt bindings mandatory. A patch by my update the ctucanfd dt bindings to include the common CAN controller bindings. The last patch is by Akira Yokosawa and fixes a breakage the ctucanfd's documentation. * tag 'linux-can-next-for-5.19-20220516' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: docs: ctucanfd: Use 'kernel-figure' directive instead of 'figure' dt-bindings: can: ctucanfd: include common CAN controller bindings dt-bindings: can: renesas,rcar-canfd: Make interrupt-names required can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual check can: ctucanfd: Let users select instead of depend on CAN_CTUCANFD can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting can: isotp: add support for transmission without flow control can: raw: add support for SO_TXTIME/SCM_TXTIME can: raw: raw_sendmsg(): remove not needed setting of skb->sk ==================== Link: https://lore.kernel.org/r/20220516202625.1129281-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16niu: Silence randstruct warningsKees Cook1-10/+31
Clang randstruct gets upset when it sees struct addresspace (which is randomized) being assigned to a struct page (which is not randomized): drivers/net/ethernet/sun/niu.c:3385:12: error: casting from randomized structure pointer type 'struct address_space *' to 'struct page *' *link = (struct page *) page->mapping; ^ It looks like niu.c is looking for an in-line place to chain its allocated pages together and is overloading the "mapping" member, as it is unused. This is very non-standard, and is expected to be cleaned up in the future[1], but there is no "correct" way to handle it today. No meaningful machine code changes result after this change, and source readability is improved. Drop the randstruct exception now that there is no "confusing" cross-type assignment. [1] https://lore.kernel.org/lkml/YnqgjVoMDu5v9PNG@casper.infradead.org/ Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Du Cheng <ducheng2@gmail.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-hardening@vger.kernel.org Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/lkml/20220511151647.7290adbe@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2022-05-16net: wwan: t7xx: Avoid calls to skb_data_area_size()Ricardo Martinez2-8/+5
skb_data_area_size() helper was used to calculate the size of the DMA mapped buffer passed to the HW. Instead of doing this, use the size passed to allocate the skbs. Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net: dsa: realtek: rtl8366rb: Serialize indirect PHY register accessAlvin Šipraga1-12/+25
Lock the regmap during the whole PHY register access routines in rtl8366rb. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220513213618.2742895-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual checkVincent Mailhol1-2/+2
slcan does a manual check in slc_xmit() to verify if the skb is valid. This check is incomplete, use instead can_dropped_invalid_skb(). Link: https://lore.kernel.org/all/20220514141650.1109542-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-16can: ctucanfd: Let users select instead of depend on CAN_CTUCANFDGeert Uytterhoeven1-3/+3
The CTU CAN-FD IP core is only useful when used with one of the corresponding PCI/PCIe or platform (FPGA, SoC) drivers, which depend on PCI resp. OF. Hence make the users select the core driver code, instead of letting then depend on it. Keep the core code config option visible when compile-testing, to maintain compile-coverage. Link: https://lore.kernel.org/all/887b7440446b6244a20a503cc6e8dc9258846706.1652104941.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-16net: phy: micrel: Use the kszphy probe/suspend/resumeFabio Estevam1-2/+3
Now that it is possible to use .probe without having .driver_data, let KSZ8061 use the kszphy specific hooks for probe,suspend and resume, which is preferred. Switch to using the dedicated kszphy probe/suspend/resume functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net: phy: micrel: Allow probing without .driver_dataFabio Estevam1-5/+6
Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net: fix dev_fill_forward_path with pppoe + bridgeFelix Fietkau1-0/+1
When calling dev_fill_forward_path on a pppoe device, the provided destination address is invalid. In order for the bridge fdb lookup to succeed, the pppoe code needs to update ctx->daddr to the correct value. Fix this by storing the address inside struct net_device_path_ctx Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-16octeontx2-pf: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-2/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16net: wwan: t7xx: Fix return type of t7xx_dl_add_timedout()YueHaibing1-4/+2
t7xx_dl_add_timedout() now return int 'ret', but the return type is bool. Change the return type to int for furthor errcode upstream. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16octeon_ep: delete unnecessary NULL checkZiyang Xuan3-6/+3
vfree(NULL) is safe. NULL check before vfree() is not needed. Delete them to simplify the code. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.