aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-03-24bnxt: set devlink port attrs properlyJiri Pirko1-0/+2
Set the attrs properly so delink has enough info to generate physical port names. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24bnxt: add missing net/devlink.h includeJiri Pirko1-0/+1
devlink functions are in use, so include the related header file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: enable driver build for arm64 or compile_testIgor Russkikh1-1/+2
The driver is now constantly tested in our lab on aarch64 hardware: Jetson tx2, Pascal and Xavier tegra based hardware. Many of tegra smmu related HW bugs were fixed or workarounded already. Thus, add ARM64 into Kconfig. Add also COMPILE_TEST dependency. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: improve LRO configurationNikita Danilov5-2/+46
Default LRO HW configuration was very conservative. Low Number of Descriptors per LRO Sequence, small session timeout, inefficient settings in interrupt generation logic. Change max number of LRO descriptors from 2 to 16 to increase performance. Increase maximum coalescing interval in HW to 250uS. Tune up HW LRO interrupt generation setting to prevent hw issues with long LRO sessions. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Increase rx ring default size from 1K to 2KIgor Russkikh1-1/+1
For multigig rates 1K ring size is often not enough and causes extra packet drops in hardware. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Make RX default frame size 2KIgor Russkikh1-1/+1
This correlates with default internet MTU. This also allows page flip/reuse to be activated, since each allocated RX page now serves for two frags/packets. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: Introduce rx refill threshold valueIgor Russkikh2-0/+6
Before that, we've refilled ring even on single descriptor move. Under high packet load that caused page allocation logic to be triggered too often. That made overall ring processing slower. Moreover, with page buffer reuse implemented, we should give a chance higher networking levels to process received packets faster, release the pages they consumed and therefore give a higher chance for these pages to be reused. RX ring is now refilled only when AQ_CFG_RX_REFILL_THRES or more descriptors were processed (32 by default). Under regular traffic this gives quite enough time for packet to be consumed and page to be reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: optimize rx performance by page reuse strategyIgor Russkikh8-63/+152
We introduce internal aq_rxpage wrapper over regular page where extra field is tracked: rxpage offset inside of allocated page. This offset allows to reuse one page for multiple packets. When needed (for example with large frames processing), allocated pageorder could be customized. This gives even larger page reuse efficiency. page_ref_count is used to track page users. If during rx refill underlying page has users, we increase pg_off by rx frame size thus the top half of the page is reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: optimize rx path using larger preallocated skb lenIgor Russkikh2-9/+20
Atlantic driver used 14 bytes preallocated skb size. That made L3 protocol processing inefficient because pskb_pull had to fetch all the L3/L4 headers from extra fragments. Specially on UDP flows that caused extra packet drops because CPU was overloaded with pskb_pull. This patch uses eth_get_headlen for skb preallocation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23Merge tag 'mlx5-updates-2019-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller19-114/+238
Saeed Mahameed says: ==================== mlx5-updates-2019-03-20 This series includes updates to mlx5 driver, 1) Compiler warnings cleanup from Saeed Mahameed 2) Parav Pandit simplifies sriov enable/disables 3) Gustavo A. R. Silva, Removes a redundant assignment 4) Moshe Shemesh, Adds Geneve tunnel stateless offload support 5) Eli Britstein, Adds the Support for VLAN modify action and Replaces TC VLAN pop and push actions with VLAN modify Note: This series includes two simple non-mlx5 patches, 1) Declare IANA_VXLAN_UDP_PORT definition in include/net/vxlan.h, and use it in some drivers. 2) Declare GENEVE_UDP_PORT definition in include/net/geneve.h, and use it in mlx5 and nfp drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller14-183/+835
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-03-22 This series contains updates to ice driver only. Akeem enables MAC anti-spoofing by default when a new VSI is being created. Fixes an issue when reclaiming VF resources back to the pool after reset, by freeing VF resources separately using the first VF vector index to traverse the list, instead of starting at the last assigned vectors list. Added support for VF & PF promiscuous mode in the ice driver. Fixed the PF driver from letting the VF know it is "not trusted" when it attempts to add more than its permitted additional MAC addresses. Altered how the driver gets the VF VSIs instances, instead of using the mailbox messages to retrieve VSIs, get it directly via the VF object in the PF data structure. Bruce fixes return values to resolve static analysis warnings. Made whitespace changes to increase readability and reduce code wrapping. Anirudh cleans up code by removing a function prototype that was never implemented and removed an unused field in the ice_sched_vsi_info structure. Kiran fixes a potential divide by zero issue by adding a check. Victor cleans up the transmit scheduler by adjusting the stack variable usage and added/modified debug prints to make them more useful. Yashaswini updates the driver in VEB mode to ensure that the LAN_EN bit is set if all the right conditions are met. Christopher ensures the loopback enable bit is not set for prune switch rules, since all transmit traffic would be looped back to the internal switch and dropped. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: convert rps_needed and rfs_needed to new static branch apiEric Dumazet1-1/+1
We prefer static_branch_unlikely() over static_key_false() these days. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23r8169: fix cable re-plugging issueHeiner Kallweit1-1/+1
Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ethernet: ti: fix possible object reference leakWen Yang1-2/+6
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ibm: fix possible object reference leakWen Yang1-0/+1
The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Douglas Miller <dougmill@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: xilinx: fix possible object reference leakWen Yang1-0/+2
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: phy: Re-parent menus for MDIO bus drivers correctlyFlorian Fainelli1-0/+3
After 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") the various MDIO bus drivers were no longer parented with config PHYLIB but with config MDIO_BUS which is not a menuconfig, fix this by depending on MDIO_DEVICE which is a menuconfig. This is visually nicer and less confusing for users. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: phy: Correct Cygnus/Omega PHY driver promptFlorian Fainelli1-2/+1
The tristate prompt should have been replaced rather than defined a few lines below, rebase mistake. Fixes: 17cc9821766c ("net: phy: Move Omega PHY entry to Cygnus PHY driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22net/mlx5e: Replace TC VLAN pop and push actions with VLAN modifyEli Britstein1-1/+11
Changing the VLAN header may be implemented by pop the existing header and push a new one. Translate those operations as VLAN modify. Applicable for use cases such as OVS where the controller translates a vlan modify meta (OF) rule to DP pop+push actions rule. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Support VLAN modify actionEli Britstein1-2/+49
Support VLAN modify action by emulating a rewrite action for the VLAN fields. Currently, the only supported field is the vid. The prio in the action must be set to 0 to indicate no change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Add VLAN ID rewrite fieldsEli Britstein1-0/+2
Add VLAN ID rewrite fields as a pre-step to support this rewrite. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net: Add IANA_VXLAN_UDP_PORT definition to vxlan header fileMoshe Shemesh5-8/+7
Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it can be used by drivers instead of local definition. Updated drivers which locally defined it as 4789 to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Cc: Peng Li <lipeng321@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: TX, Add geneve tunnel stateless offload supportMoshe Shemesh4-3/+77
Currently support only default geneve udp port (6081). For the tx side, the HW is assisted by SW parsing, which sets the headers offset to offload tunneled LSO and csum. Note that for udp tunnels, we don't use special rx offloads, as rss on the outer headers is enough, we support checksum complete and GRO takes care of aggregation. Geneve TSO BW and CPU load results (tested using iperf single tcp stream). In this patch we add TSO support over Geneve, so the "before" result doesn't actually get to using the TSO HW offload even when turned on. Tested on ConnectX-5, Intel(R) Xeon(R) CPU E5-2660 v2 @2.20GHz. __________________________________ | Before | After | |________________|_________________| | 12.6 Gbits/sec | 21.7 Gbits/sec | | 100% CPU load | 61.5% CPU load | |________________|_________________| Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Take SW parser code to a separate functionMoshe Shemesh2-24/+53
Refactor mlx5e_ipsec_set_swp() code, split the part which sets the eseg software parser (SWP) offsets and flags, so it can be used in a downstream patch by other mlx5e functionality which needs to set eseg SWP. The new function mlx5e_set_eseg_swp() is useful for setting swp for both outer and inner headers. It also handles the special ipsec case of xfrm mode transfer. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net: Move the definition of the default Geneve udp port to public header fileMoshe Shemesh4-5/+2
Move the definition of the default Geneve udp port from the geneve source to the header file, so we can re-use it from drivers. Modify existing drivers to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Remove redundant assignmentGustavo A. R. Silva1-4/+2
Remove redundant assignment to tun_entropy->enabled. Addesses-Coverity-ID: 1477328 ("Unused value") Fixes: 97417f6182f8 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Fix compilation warning in en_tc.cSaeed Mahameed2-2/+3
Amazingly a mlx5e_tc function is being called from the eswitch layer, which is by itself very terrible! The function was declared locally in eswitch_offloads.c so it could be used there, which caused the following compilation warning, fix that. drivers/.../mlx5/core/en_tc.c:3242:6: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5e_tc_clean_fdb_peer_flows’ Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Fix port buffer function documentation formatSaeed Mahameed1-15/+15
This patch fixes compiler warnings: In drivers/.../mlx5/core/en/port_buffer.c:190: warning: Function parameter or member 'pfc_en' not described... ... warning: Function parameter or member 'change' not described... Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Fix compilation warning in eq.cSaeed Mahameed1-4/+2
mlx5_eq_table_get_rmap is being used only when CONFIG_RFS_ACCEL is enabled, this patch fixes the below warning when CONFIG_RFS_ACCEL is disabled. drivers/.../mlx5/core/eq.c:903:18: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5_eq_table_get_rmap’ Fixes: f2f3df550139 ("net/mlx5: EQ, Privatize eq_table and friends") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Simplify mlx5_sriov_is_enabled() by using pci core APIParav Pandit2-8/+5
It is desired to get rid of num_vfs stored inside mlx5_core_sriov to safely support vports more than vfs. To reduce dependency on mlx5_core_sriov num_vfs, start using pci_num_vf() from pci core. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Rename total_vfs to total_vportsParav Pandit1-2/+2
Macro MLX5_TOTAL_VPORTS() returns total number of vports. Therefore, rename variable total_vfs to total_vports to improve code readability. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Simplify sriov enable/disable flowParav Pandit1-36/+8
Simplify sriov enable/disable flow for below two checks. 1. PCI core driver allows sriov configuration only on a PF. This is done in drivers/pci/pci-sysfs.c sriov_attrs_are_visible(). 2. PCI core driver allow sriov enablement if the sriov is currently disabled for for a PF. This is done in drivers/pci/pci-sysfs.c sriov_numvfs_store(). Hence there is no need for mlx5 driver to duplicate such checks. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22ice: Get VF VSI instances directly via PFAkeem G Abodunrin1-8/+27
This patch changes how we get VF VSIs instances. Instead of relying on mailbox virtual channel message to retrieve VSI, it is more reliable getting it directly via VF object in PF data structure. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Don't let VF know that it is untrustedAkeem G Abodunrin1-4/+8
Don't let the VF know it's not trusted when it tries to add more than permitted additional MAC addresses. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Set LAN_EN for all directional rulesYashaswini Raghuram Prathivadi Bhayankaram1-3/+9
The LAN_EN bit for a switch rule determines if the packet can go out on the wire or not. Set the LAN_EN flag in the switch action for all directional rules. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Do not set LB_EN for prune switch rulesChristopher N Bednarz1-1/+6
LB_EN for prune switch rules was causing all TX traffic to loopback to the internal switch and dropped. When running bi-directional stress workloads with RDMA the RDPU would hang blocking tx and rx traffic. Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Enable LAN_EN for the right recipesYashaswini Raghuram Prathivadi Bhayankaram1-9/+20
In VEB mode, enable LAN_EN bit in the action fields for filter rules corresponding to the right recipes. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Add support for PF/VF promiscuous modeAkeem G Abodunrin7-31/+527
Implement support for VF promiscuous mode, MAC/VLAN/MAC_VLAN and PF multicast MAC/VLAN/MAC_VLAN promiscuous mode. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: code cleanup in ice_sched.cVictor Raj1-8/+9
This patch does some clean up in the Tx scheduler code: 1. Adjust the stack variable usage 2. Modify the debug prints to display the FW error 3. Add additional debug prints while adding/removing VSIs Signed-off-by: Victor Raj <victor.raj@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Remove unused vsi_id fieldAnirudh Venkataramanan1-1/+0
Remove unused vsi_id field from struct ice_sched_vsi_info. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix some function prototype and signature style issuesBruce Allan11-87/+108
Put the return type on a separate line for function prototypes and signatures that would exceed the 80-character limit if both were on the same line. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix the divide by zero issueKiran Patil1-1/+12
Static analysis flagged a potential divide by zero error because vsi->num_rxq can become zero in certain condition and it is used as divisor. Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Fix issue reconfiguring VF queuesAkeem G Abodunrin3-16/+76
When VF requested for queues changes, we need to update LAN Tx queue with correct number of VF queue pairs and re-allocate VF resources based on this new requested number of queues, which is constraint within maximum queue supported per VF. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Remove unused function prototypeAnirudh Venkataramanan1-10/+0
Commit 7c710869d64e ("ice: Add handlers for VF netdevice operations") seems to have inadvertently introduced a function prototype for ice_set_vf_bw that isn't implemented. Remove it. Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix static analysis warningsBruce Allan4-4/+4
cppcheck warns "Identical condition '<var>', second condition is always false". Fix them. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Fix issue reclaiming resources back to the pool after resetAkeem G Abodunrin1-3/+23
This patch fixes issue reclaiming VF resources back to the pool after reset - Since we only allocate HW vector for all VFs and track together with resources allocation for PF with ice_search_res, we need to free VFs resources separately, using first VF vector index to traverse the list. Otherwise tracker starts from the last assigned vectors list and causes maximum supported number of HW vectors, 1024 to be exhausted, depending on the number of VFs enabled, which causes a lot of unwanted issues, and failed to reassign vectors for VFs. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Enable MAC anti-spoof by defaultAkeem G Abodunrin1-0/+9
This patch enables MAC anti-spoof by default, with creation of VF VSIs or when the VF VSIs are being re-initialized. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22genetlink: make policy common to familyJohannes Berg5-29/+5
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22r8169: use netif_start_queue instead of netif_wake_qeueue in rtl8169_start_xmitHeiner Kallweit1-1/+1
Replace the call to netif_wake_queue in rtl8169_start_xmit with netif_start_queue as we don't need to actually wake up the queue since we are still in mid transmit so we just need to reset the bit so it doesn't prevent the next transmit. (Description shamelessly copied from a mail sent by Alex.) Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22r8169: don't read interrupt mask register in interrupt handlerHeiner Kallweit1-2/+4
After the original patch network starts to crash on heavy load. It's not fully clear why this additional register read has such side effects, but removing it fixes the issue. Thanks also to Alex for his contribution and hints. [0] https://marc.info/?t=155268170400002&r=1&w=2 Fixes: e782410ed237 ("r8169: improve spurious interrupt detection") Reported-by: VDR User <user.vdr@gmail.com> Tested-by: VDR User <user.vdr@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.