aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-04-15ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-9/+19
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code IXGBE_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-8-maciej.fijalkowski@intel.com
2022-04-15i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-10/+23
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code I40E_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-7-maciej.fijalkowski@intel.com
2022-04-15ice, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-10/+20
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code ICE_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-6-maciej.fijalkowski@intel.com
2022-04-15ixgbe, xsk: Decorate IXGBE_XDP_REDIR with likely()Maciej Fijalkowski1-12/+13
ixgbe_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most probable action returned from BPF program that AF_XDP has in its pipeline. Let's also bring this suggestion up to the callsite of ixgbe_run_xdp_zc() so that compiler will be able to generate more optimized code which in turn will make branch predictor happy. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-5-maciej.fijalkowski@intel.com
2022-04-15ice, xsk: Decorate ICE_XDP_REDIR with likely()Maciej Fijalkowski1-10/+11
ice_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most probable action returned from BPF program that AF_XDP has in its pipeline. Let's also bring this suggestion up to the callsite of ice_run_xdp_zc() so that compiler will be able to generate more optimized code which in turn will make branch predictor happy. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-4-maciej.fijalkowski@intel.com
2022-04-15net: hns3: add tx push support in hns3 ring param processJie Wang1-1/+32
This patch adds tx push param to hns3 ring param and adapts the set and get API of ring params. So users can set it by cmd ethtool -G and get it by cmd ethtool -g. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15net: restore alpha order to Ethernet devices in configStephen Hemminger1-13/+13
The displayed list of Ethernet devices in make menuconfig has gotten out of order. This is mostly due to changes in vendor names etc, but also because of new Microsoft entry in wrong place. This restores so that the display is in order even if the names of the sub directories are not. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15octeon_ep: fix error return code in octep_probe()Yang Yingliang1-1/+2
If register_netdev() fails , it should return error code in octep_probe(). Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: emaclite: Remove custom BUFFER_ALIGN macroShravya Kumbham1-16/+2
BUFFER_ALIGN macro is used to calculate the number of bytes required for the next alignment. Instead of this, we can directly use the skb_reserve(skb, NET_IP_ALIGN) to make the protocol header buffer aligned on at least a 4-byte boundary, where the NET_IP_ALIGN is by default defined as 2. So removing the BUFFER_ALIGN and its related defines which it can be done by the skb_reserve() itself. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: emaclite: Update copyright text to correct formatMichal Simek1-1/+1
Based on recommended guidance Copyright term should be also present in front of (c). That's why aligned driver to match this pattern. It helps automated tools with source code scanning. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: emaclite: Fix coding styleRadhey Shyam Pandey1-20/+15
Make coding style changes to fix checkpatch script warnings. There is no functional change. Fixes below check and warnings- CHECK: Blank lines aren't necessary after an open brace '{' CHECK: spinlock_t definition without comment CHECK: Please don't use multiple blank lines WARNING: Prefer 'unsigned int' to bare use of 'unsigned' CHECK: braces {} should be used on all arms of this statement CHECK: Unbalanced braces around else statement CHECK: Alignment should match open parenthesis WARNING: Missing a blank line after declarations Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller4-3/+10
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-14 This series contains updates to ice driver only. Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when ice_fill_rx_descs() does not return the entire buffer request and fixes a return value for !CONFIG_NET_SWITCHDEV configuration which was preventing VF creation. Wojciech prevents eswitch transmit when VFs are being removed which was causing NULL pointer dereference. Jianglei Nie fixes a memory leak on error path of getting OROM data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: ethernet: ti: davinci_emac: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-6/+3
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15octeon_ep: Fix spelling mistake "inerrupts" -> "interrupts"Colin Ian King1-1/+1
There is a spelling mistake in a dev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_thermal: Use common define for thermal zone name lengthVadim Pasternak1-3/+2
Replace internal define 'MLXSW_THERMAL_ZONE_MAX_NAME' by common 'THERMAL_NAME_LENGTH'. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_thermal: Use exact name of cooling devices for bindingVadim Pasternak1-2/+1
Modular system supports additional cooling devices "mlxreg_fan1", "mlxreg_fan2", etcetera. Thermal zones in "mlxsw" driver should be bound to the same device as before called "mlxreg_fan". Used exact match for cooling device name to avoid binding to new additional cooling devices. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_thermal: Add line card id prefix to line card thermal zone nameVadim Pasternak1-4/+12
Add prefix "lc#n" to thermal zones associated with the thermal objects found on line cards. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #3 located at line card #5 will have type: mlxsw-lc5-gearbox3. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_thermal: Extend internal structures to support multi thermal areasVadim Pasternak1-57/+91
Introduce intermediate level for thermal zones areas. Currently all thermal zones are associated with thermal objects located within the main board. Such objects are created during driver initialization and removed during driver de-initialization. For line cards in modular system the thermal zones are to be associated with the specific line card. They should be created whenever new line card is available (inserted, validated, powered and enabled) and removed, when line card is getting unavailable. The thermal objects found on the line card #n are accessed by setting slot index to #n, while for access to objects found on the main board slot index should be set to default value zero. Each thermal area contains the set of thermal zones associated with particular slot index. Thus introduction of thermal zone areas allows to use the same APIs for the main board and line cards, by adding slot index argument. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_hwmon: Introduce slot parameter in hwmon interfacesVadim Pasternak1-10/+20
Add 'slot' parameter to 'mlxsw_hwmon_dev' structure. Use this parameter in mlxsw_reg_mtmp_pack(), mlxsw_reg_mtbr_pack(), mlxsw_reg_mgpir_pack() and mlxsw_reg_mtmp_slot_index_set() routines. For main board it'll always be zero, for line cards it'll be set to the physical slot number in modular systems. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core_hwmon: Extend internal structures to support multi hwmon objectsVadim Pasternak1-76/+111
Currently, mlxsw supports a single hwmon device and registers it with attributes corresponding to the various objects found on the main board such as fans and gearboxes. Line cards can have the same objects, but unlike the main board they can be added and removed while the system is running. The various hwmon objects found on these line cards should be created when the line card becomes available and destroyed when the line card becomes unavailable. The above can be achieved by representing each line card as a different hwmon device and registering / unregistering it when the line card becomes available / unavailable. Prepare for multi hwmon device support by splitting 'struct mlxsw_hwmon' into 'struct mlxsw_hwmon' and 'struct mlxsw_hwmon_dev'. The first will hold information relevant to all hwmon devices, whereas the second will hold per-hwmon device information. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core: Move port module events enablement to a separate functionVadim Pasternak1-8/+31
Use a separate function for enablement of port module events such plug/unplug and temperature threshold crossing. The motivation is to reuse the function for line cards. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core: Extend port module data structures for line cardsVadim Pasternak1-73/+169
The port module core is tasked with module operations such as setting power mode policy and reset. The per-module information is currently stored in one large array suited for non-modular systems where only the main board is present (i.e., slot index 0). As a preparation for line cards support, allocate a per line card array according to the queried number of slots in the system. For each line card, allocate a module array according to the queried maximum number of modules per-slot. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core: Extend interfaces for cable info access with slot argumentVadim Pasternak7-134/+184
Extend all cable info APIs with 'slot_index' argument. For main board, slot will always be set to zero and these APIs will work as before. If reading cable information is required from cages located on line cards, slot should be set to the physical slot number, where line card is located in modular systems. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: ethernet: ti: cpsw_priv: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-12/+6
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: stmmac: stmmac_main: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-12/+6
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: ethernet: ti: cpsw_new: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()Minghao Chi1-22/+11
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15geneve: avoid indirect calls in GRO path, when possiblePaolo Abeni1-2/+8
In the most common setups, the geneve tunnels use an inner ethernet encapsulation. In the GRO path, when such condition is true, we can call directly the relevant GRO helper and avoid a few indirect calls. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: phy: LAN937x: added PHY_POLL_CABLE_TEST flagArun Ramadoss1-0/+1
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: mvneta: add support for page_pool_get_statsLorenzo Bianconi2-1/+20
Introduce support for the page_pool stats API into mvneta driver. Report page_pool stats through ethtool. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni36-126/+181
2022-04-14Merge tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds33-122/+177
Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter. Current release - regressions: - smc: fix af_ops of child socket pointing to released memory - wifi: ath9k: fix usage of driver-private space in tx_info Previous releases - regressions: - ipv6: fix panic when forwarding a pkt with no in6 dev - sctp: use the correct skb for security_sctp_assoc_request - smc: fix NULL pointer dereference in smc_pnet_find_ib() - sched: fix initialization order when updating chain 0 head - phy: don't defer probe forever if PHY IRQ provider is missing - dsa: revert "net: dsa: setup master before ports" - dsa: felix: fix tagging protocol changes with multiple CPU ports - eth: ice: - fix use-after-free when freeing @rx_cpu_rmap - revert "iavf: fix deadlock occurrence during resetting VF interface" - eth: lan966x: stop processing the MAC entry is port is wrong Previous releases - always broken: - sched: - flower: fix parsing of ethertype following VLAN header - taprio: check if socket flags are valid - nfc: add flush_workqueue to prevent uaf - veth: ensure eth header is in skb's linear part - eth: stmmac: fix altr_tse_pcs function when using a fixed-link - eth: macb: restart tx only if queue pointer is lagging - eth: macvlan: fix leaking skb in source mode with nodst option" * tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies net: dsa: felix: fix tagging protocol changes with multiple CPU ports tun: annotate access to queue->trans_start nfc: nci: add flush_workqueue to prevent uaf net: dsa: realtek: don't parse compatible string for RTL8366S net: dsa: realtek: fix Kconfig to assure consistent driver linkage net: ftgmac100: access hardware register after clock ready Revert "net: dsa: setup master before ports" macvlan: Fix leaking skb in source mode with nodst option netfilter: nf_tables: nft_parse_register can return a negative value net: lan966x: Stop processing the MAC entry is port is wrong. net: lan966x: Fix when a port's upper is changed. net: lan966x: Fix IGMP snooping when frames have vlan tag net: lan966x: Update lan966x_ptp_get_nominal_value sctp: Initialize daddr on peeled off socket net/smc: Fix af_ops of child socket pointing to released memory net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() net/smc: use memcpy instead of snprintf to avoid out of bounds read net: macb: Restart tx only if queue pointer is lagging ...
2022-04-14ice: Fix memory leak in ice_get_orom_civd_data()Jianglei Nie1-0/+1
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: fix crash in switchdev modeWojciech Drewek1-1/+2
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a663f ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: allow creating VFs for !CONFIG_NET_SWITCHDEVMaciej Fijalkowski1-1/+1
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <grzegorz.nitka@intel.com> Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski1-1/+6
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14rndis_host: limit scope of bogus MAC address detection to ZTE devicesLech Perczak1-5/+12
Reporting of bogus MAC addresses and ignoring configuration of new destination address wasn't observed outside of a range of ZTE devices, among which this seems to be the common bug. Align rndis_host driver with implementation found in cdc_ether, which also limits this workaround to ZTE devices. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rndis_host: enable the bogus MAC fixup for ZTE devices from cdc_etherLech Perczak1-0/+32
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from MF286R, expose both CDC-ECM and RNDIS network interfaces. They have a trait of ignoring the locally-administered MAC address configured on the interface both in CDC-ECM and RNDIS part, and this leads to dropping of incoming traffic by the host. However, the workaround was only present in CDC-ECM, and MF286R explicitly requires it in RNDIS mode. Re-use the workaround in rndis_host as well, to fix operation of MF286R module, some versions of which expose only the RNDIS interface. Do so by introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all of the packets inside the batch need the fixup. This might introduce a performance penalty, because test is done for every returned Ethernet frame. Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE modems, like MF823 found in the wild, report the USB_CLASS_COMM class interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14cdc_ether: export usbnet_cdc_zte_rx_fixupLech Perczak1-1/+2
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduces a workaround for certain ZTE modems reporting invalid MAC addresses over CDC-ECM. The same issue was present on their RNDIS interface,which was fixed in commit a5a18bdf7453 ("rndis_host: Set valid random MAC on buggy devices"). However, internal modem of ZTE MF286R router, on its RNDIS interface, also exhibits a second issue fixed already in CDC-ECM, of the device not respecting configured random MAC address. In order to share the fixup for this with rndis_host driver, export the workaround function, which will be re-used in the following commit in rndis_host. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton1-2/+2
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14net: dsa: felix: fix tagging protocol changes with multiple CPU portsVladimir Oltean1-0/+23
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14tun: annotate access to queue->trans_startAntoine Tenart1-1/+1
Commit 5337824f4dc4 ("net: annotate accesses to queue->trans_start") introduced a new helper, txq_trans_cond_update, to update queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c was missed, as it was introduced roughly at the same time. Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin1-2/+2
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: stable@vger.kernel.org Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <jahutchinson99@googlemail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Tested-by: James Hutchinson <jahutchinson99@googlemail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13igc: Fix suspending when PTM is activeVinicius Costa Gomes1-1/+14
Some mainboard/CPU combinations, in particular, Alder Lake-S with a W680 mainboard, have shown problems (system hangs usually, no kernel logs) with suspend/resume when PCIe PTM is enabled and active. In some cases, it could be reproduced when removing the igc module. The best we can do is to stop PTM dialogs from the downstream/device side before the interface is brought down. PCIe PTM will be re-enabled when the interface is being brought up. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13igc: Fix BUG: scheduling while atomicSasha Neftin1-2/+2
Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838fe9ce ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <vinschen@redhat.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13igc: Fix infinite loop in release_swfw_syncSasha Neftin1-2/+9
An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release. This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit. Fixes: c0071c7aa5fe ("igc: Add HW initialization code") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13net: dsa: realtek: don't parse compatible string for RTL8366SAlvin Šipraga1-5/+0
This switch is not even supported, but if someone were to actually put this compatible string "realtek,rtl8366s" in their device tree, they would be greeted with a kernel panic because the probe function would dereference NULL. So let's just remove it. Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/ Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: dsa: realtek: fix Kconfig to assure consistent driver linkageAlvin Šipraga1-9/+21
The kernel test robot reported a build failure: or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant' ... with the following build configuration: CONFIG_NET_DSA_REALTEK=y CONFIG_NET_DSA_REALTEK_SMI=y CONFIG_NET_DSA_REALTEK_RTL8365MB=y CONFIG_NET_DSA_REALTEK_RTL8366RB=m The problem here is that the realtek-smi interface driver gets built-in, while the rtl8366rb switch subdriver gets built as a module, hence the symbol rtl8366rb_variant is not reachable when defining the OF device table in the interface driver. The Kconfig dependencies don't help in this scenario because they just say that the subdriver(s) depend on at least one interface driver. In fact, the subdrivers don't depend on the interface drivers at all, and can even be built even in their absence. Somewhat strangely, the interface drivers can also be built in the absence of any subdriver, BUT, if a subdriver IS enabled, then it must be reachable according to the linkage of the interface driver: effectively what the IS_REACHABLE() macro achieves. If it is not reachable, the above kind of linker error will be observed. Rather than papering over the above build error by simply using IS_REACHABLE(), we can do a little better and admit that it is actually the interface drivers that have a dependency on the subdrivers. So this patch does exactly that. Specifically, we ensure that: 1. The interface drivers' Kconfig symbols must have a value no greater than the value of any subdriver Kconfig symbols. 2. The subdrivers should by default enable both interface drivers, since most users probably want at least one of them; those interface drivers can be explicitly disabled however. What this doesn't do is prevent a user from building only a subdriver, without any interface driver. To that end, add an additional line of help in the menu to guide users in the right direction. Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13nfp: update nfp_X logging definitionsDylan Muller1-6/+20
Previously it was not possible to determine which code path was responsible for generating a certain message after a call to the nfp_X messaging definitions for cases of duplicate strings. We therefore modify nfp_err, nfp_warn, nfp_info, nfp_dbg and nfp_printk to print the corresponding file and line number where the nfp_X definition is used. Signed-off-by: Dylan Muller <dylan.muller@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13Merge tag 'wireless-2022-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller5-23/+38
Kalle Valo says: ==================== wireless fixes for v5.18 First set of fixes for v5.18. Maintainers file updates, two compilation warning fixes, one revert for ath11k and smaller fixes to drivers and stack. All the usual stuff. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13octeon_ep: add ethtool support for Octeon PCI Endpoint NICVeerasenareddy Burru3-1/+465
Add support for the following ethtool commands: ethtool -i|--driver devname ethtool devname ethtool -s devname [speed N] [autoneg on|off] [advertise N] ethtool -S|--statistics devname Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Signed-off-by: Satananda Burla <sburla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.