aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09mn10300: Remove the architectureDavid Howells2-11/+3
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-09mlxsw: spectrum: Prevent duplicate mirrorsPetr Machata2-4/+27
The Spectrum ASIC doesn't support mirroring more than once from a single binding point (which is a port-direction pair). Therefore detect that a second binding of a given binding point is attempted. To that end, extend struct mlxsw_sp_span_inspected_port to track whether a given binding point is bound or not. Extend mlxsw_sp_span_entry_port_find() to look for ports based on the full unique key: port number, direction, and boundness. Besides fixing the overt bug where configured mirrors are not offloaded, this also fixes a more subtle bug: mlxsw_sp_span_inspected_port_del() just defers to mlxsw_sp_span_entry_bound_port_find(), and that used to find the first port with the right number (disregarding the type). Thus by adding and removing egress and ingress mirrors in the right order, one could trick the system into believing it has no egress mirrors when in fact it did have some. That then caused that mlxsw_sp_span_port_mtu_update() didn't update mirroring buffer when MTU was changed. Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09mlxsw: spectrum: Fix gact_ok offloadingJiri Pirko5-1/+19
For ok GACT action, TERMINATE binding_cmd should be used in action set passed down to HW. Fixes: b2925957ec1a9 ("mlxsw: spectrum_flower: Offload "ok" termination action") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: introduce IFF_NO_RX_HANDLERPaolo Abeni1-0/+2
Some network devices - notably ipvlan slave - are not compatible with any kind of rx_handler. Currently the hook can be installed but any configuration (bridge, bond, macsec, ...) is nonfunctional. This change allocates a priv_flag bit to mark such devices and explicitly forbid installing a rx_handler if such bit is set. The new bit is used by ipvlan slave device. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09cxgb4: increase max tx rate limit to 100 GbpsGanesh Goudar2-5/+5
T6 cards can support up to 100 G speeds. So, increase max programmable tx rate limit to 100 Gbps. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09vhost_net: examine pointer types during un-producingJason Wang1-1/+2
After commit fc72d1d54dd9 ("tuntap: XDP transmission"), we can actually queueing XDP pointers in the pointer ring, so we should examine the pointer type before freeing the pointer. Fixes: fc72d1d54dd9 ("tuntap: XDP transmission") Reported-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: ethernet: ave: enable Rx drop interruptKunihiko Hayashi1-1/+1
This enables AVE_GI_RXDROP interrupt factor. This factor indicates depletion of Rx descriptors and the handler counts the number of dropped packets. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: fix for coal configuation lost when setting the channelYunsheng Lin1-3/+34
This patch fixes the coalesce configuation lost problem when setting the channel number by restoring all vectors's coalesce configuation to vector 0's, because all vectors belonging to the same netdev have the same coalesce configuation for now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: refactor the coalesce related structYunsheng Lin3-36/+46
This patch refoctors the coalesce related struct by introducing the hns3_enet_coalesce struct, in order to fix the coalesce configuation lost problem when changing the channel number. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: fix for coalesce configuration lost during resetYunsheng Lin1-42/+114
Coalesce configuration will be set to default value by hns3_nic_init_vector_data during reset, which causes the coalesce configuration loss problem. This patch fixes it by setting the default value in hns3_nic_alloc_vector_data, which will not be called in the reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: refactor the get/put_vector functionYunsheng Lin4-10/+37
There is a get_vector function, which allocate the vectors for a client, but there is not a put_vector to free the vector. This patch introduces the put_vector function in order to fix the coalesce configuration lost problem during reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: fix for use-after-free when setting ring parameterYunsheng Lin1-5/+5
In hns3_set_ringparam, hns3_uninit_all_ring frees the memory pointed by priv->ring_data[i].ring, and hns3_change_all_ring_bd_num use that pointer without mallocing, which will cause a use-after-free problem. The patch fixes it by not freeing the memory in hns3_uninit_all_ring, and uses hns3_put_ring_config to free it when necessary. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: fix for pause configuration lost during resetYunsheng Lin1-2/+2
Pause configuration will be set to default value by hclge_tm_schd_init during reset, which causes the RSS configuration loss problem. This patch fixes it by calling hclge_tm_init_hw during reset process , which will set the pause configuration to default value. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: fix for RSS configuration loss problem during resetYunsheng Lin3-54/+56
RSS configuration will be set to default value by hclge_rss_init_hw during reset, which causes the RSS configuration loss problem. This patch fixes it by setting the default value in hclge_rss_init_cfg function, which will not be called in the reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: refactor the hclge_get/set_rss_tuple functionYunsheng Lin2-37/+67
This patch refactors the hclge_get/set_rss_tuple function in order to fix the rss configuration loss problem during reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: hns3: refactor the hclge_get/set_rss functionYunsheng Lin2-32/+9
This patch refactors the hclge_get/set_rss function in order to fix the rss configuration loss problem during reset process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: dsa: mv88e6xxx: Fix irq free'ingAndrew Lunn1-1/+1
Call the common irq free function, rather than going recursive and blowing away the stack, followed by the machine. Fixes: 294d711ee8c0 ("net: dsa: mv88e6xxx: Poll when no interrupt defined") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: usb: asix88179_178a: de-duplicate codeAlexander Kurz1-85/+30
Remove the duplicated code for asix88179_178a bind and reset methods. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: usb: asix88179_178a: set permanent address once onlyAlexander Kurz1-1/+0
The permanent address of asix88179_178a devices is read at probe time and should not be overwritten later. Otherwise it may be overwritten unintentionally with a configured address. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08sfc: support RSS spreading of ethtool ntuple filtersEdward Cree9-150/+443
Use a linked list to associate user-facing context IDs with FW-facing context IDs (since the latter can change after an MC reset). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08liquidio: avoid doing useless workPrasad Kanneganti2-2/+9
Avoid doing useless work by making sure that the response_list is not empty before scheduling work to process it. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08liquidio: Resolved mbox read issue while reading more than one 64bit dataIntiyaz Basha1-2/+3
Corrected length check when data received in the mbox is more than one 64 bit data value Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08Merge tag 'mlx5-updates-2018-02-28-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxDavid S. Miller11-275/+1617
Saeed Mahameed says: ==================== mlx5-updates-2018-02-28-2 (IPSec-2) This series follows our previous one to lay out the foundations for IPSec in user-space and extend current kernel netdev IPSec support. As noted in our previous pull request cover letter "mlx5-updates-2018-02-28-1 (IPSec-1)", the IPSec mechanism will be supported through our flow steering mechanism. Therefore, we need to change the initialization order. Furthermore, IPsec is also supported in both egress and ingress. Since our current flow steering is egress only, we add an empty (only implemented through FPGA steering ops) egress namespace to handle that case. We also implement the required flow steering callbacks and logic in our FPGA driver. We extend the FPGA support for ESN and modifying a xfrm too. Therefore, we add support for some new FPGA command interface that supports them. The other required bits are added too. The new features and requirements are advertised via cap bits. Last but not least, we revise our driver's accel_esp API. This API will be shared between our netdev and IB driver, so we need to have all the required functionality from both worlds. Regards, Aviad and Matan ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08ibmvnic: Do not disable device during failover or partition migrationThomas Falcon1-4/+7
During a device failover or partition migration reset, it is not necessary to disable the backing adapter since it should not be running yet and its Command-Response Queue is closed. Sending device commands during this time could result in an error or timeout disrupting the reset process. In these cases, just halt transmissions, clean up resources, and continue with reset. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08ibmvnic: Reorganize device closeThomas Falcon1-9/+14
Introduce a function to halt network operations and clean up any unused or outstanding socket buffers. Then, during device close, disable backing adapter before halting all queues and performing cleanup. This ensures all backing device operations will be stopped before the driver cleans up shared resources. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08ibmvnic: Clean up device closeThomas Falcon1-12/+2
Remove some dead code now that RX pools are being cleaned. This was included to wait until any pending RX queue interrupts are processed, but NAPI polling should be disabled by this point. Another minor change is to use the net device parameter for any print functions instead of accessing it from the adapter structure. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08hv_netvsc: fix locking during VF setupStephen Hemminger1-0/+4
The dev_uc/mc_sync calls need to have the device address list locked. This was spotted by running with lockdep enabled. Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08hv_netvsc: fix locking for rx_modeStephen Hemminger1-3/+8
The rx_mode operation handler is different than other callbacks in that is not always called with rtnl held. Therefore use RCU to ensure that references are valid. Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08hv_netvsc: avoid repeated updates of packet filterStephen Hemminger2-2/+7
The netvsc driver can get repeated calls to netvsc_rx_mode during network setup; each of these calls ends up scheduling the lower layers to update tha packet filter. This update requires an request/response to the host. So avoid doing this if we already know that the correct packet filter value is set. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08hv_netvsc: fix filter flagsStephen Hemminger1-2/+2
The recent change to not always enable all multicast and broadcast was broken; meant to set filter, not change flags. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08Merge tag 'wireless-drivers-for-davem-2018-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller25-88/+212
Kalle Valo: ==================== wireless-drivers fixes for 4.16 Quote a few fixes as I have not been able to send a pull request earlier. Most of the fixes for iwlwifi but also few others, nothing really standing out though. iwlwifi * fix a bogus warning when freeing a TFD * fix severe throughput problem with 9000 series * fix for a bug that caused queue hangs in certain situations * fix for an issue with IBSS * fix an issue with rate-scaling in AP-mode * fix Channel Switch Announcement (CSA) issues with count 0 and 1 * some firmware debugging fixes * remov a wrong error message when removing keys * fix a firmware sysassert most usually triggered in IBSS * a couple of fixes on multicast queues * a fix with CCMP 256 rtlwifi * fix loss of signal for rtl8723be brcmfmac * add possibility to obtain firmware error * fix P2P_DEVICE ethernet address generation ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: add support for VF driver inner interface hclgevf_ops.get_tqps_and_rss_infoPeng Li1-0/+10
This patch adds support for VF driver inner interface hclgevf_ops.get_tqps_and_rss_info. This interface will be used in the initialization process. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: set the max ring num when alloc netdevPeng Li1-14/+13
HNS3 driver should alloc netdev with max support ring num, as driver support change netdev count by ethtool -L. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: fix the queue id for tqp enable&&resetPeng Li1-26/+24
Command HCLGE_OPC_CFG_COM_TQP_QUEUE should use queue id in the function, but command HCLGE_OPC_RESET_TQP_QUEUE should use global queue id. This patch fixes the queue id about queue enable/disable/reset. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: fix endian issue when PF get mbx message flagPeng Li1-3/+4
This patch fixes the endian issue when PF get mbx message flag. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: set the cmdq out_vld bit to 0 after usedPeng Li2-0/+2
Driver check the out_vld bit when get a new cmdq BD, if the bit is 1, the BD is valid. driver Should set the bit 0 after used and hw will set the bit 1 if get a valid BD. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: hns3: VF should get the real rss_size instead of rss_size_maxPeng Li1-1/+1
VF driver should get the real rss_size which is assigned by host PF, not rss_size_max. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08team: Fix double free in error pathArkadi Sharshevsky1-2/+2
The __send_and_alloc_skb() receives a skb ptr as a parameter but in case it fails the skb is not valid: - Send failed and released the skb internally. - Allocation failed. The current code tries to release the skb in case of failure which causes redundant freeing. Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08ipvlan: properly annotate rx_handler accessPaolo Abeni1-1/+1
The rx_handler field is rcu-protected, but I forgot to use the proper accessor while refactoring netif_is_ipvlan_port(). Such function only check the rx_handler value, so it is safe, but we need to properly read rx_handler via rcu_access_pointer() to avoid sparse warnings. Fixes: 1ec54cb44e67 ("net: unpollute priv_flags space") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07net/mlx5: Fix wrongly assigned CQ reference counterLeon Romanovsky1-2/+1
The kernel compiled with CONFIG_REFCOUNT_FULL produces the following error. The reason to it that initial value of refcount_t is supposed to be more than 0, change it. [ 3.106634] ------------[ cut here ]------------ [ 3.107756] refcount_t: increment on 0; use-after-free. [ 3.109130] WARNING: CPU: 0 PID: 1 at lib/refcount.c:153 refcount_inc+0x27/0x30 [ 3.110085] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00028-gf683e04bdccc #137 [ 3.110085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 3.110085] RIP: 0010:refcount_inc+0x27/0x30 [ 3.110085] RSP: 0000:ffffaa620000fba0 EFLAGS: 00010286 [ 3.110085] RAX: 0000000000000000 RBX: ffff9a6d1a1821c8 RCX: ffffffff98a50f48 [ 3.110085] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000246 [ 3.110085] RBP: ffff9a6d1ac800a0 R08: 0000000000000289 R09: 000000000000000a [ 3.110085] R10: fffff03bc0682840 R11: ffffffff9949856d R12: ffff9a6d1b4a4000 [ 3.110085] R13: 0000000000000000 R14: ffff9a6d1a0a6c00 R15: ffffaa620000fc5c [ 3.110085] FS: 0000000000000000(0000) GS:ffff9a6d1fc00000(0000) knlGS:0000000000000000 [ 3.110085] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.110085] CR2: 0000000000000000 CR3: 000000000ba0a000 CR4: 00000000000006b0 [ 3.110085] Call Trace: [ 3.110085] mlx5_core_create_cq+0xde/0x250 [ 3.110085] ? __kmalloc+0x1ce/0x1e0 [ 3.110085] mlx5e_create_cq+0x15c/0x1e0 [ 3.110085] mlx5e_open_drop_rq+0xea/0x190 [ 3.110085] mlx5e_attach_netdev+0x53/0x140 [ 3.110085] mlx5e_attach+0x3d/0x60 [ 3.110085] mlx5e_add+0x11d/0x2f0 [ 3.110085] mlx5_add_device+0x77/0x170 [ 3.110085] mlx5_register_interface+0x74/0xc0 [ 3.110085] ? set_debug_rodata+0x11/0x11 [ 3.110085] init+0x67/0x72 [ 3.110085] ? mlx4_en_init_ptys2ethtool_map+0x346/0x346 [ 3.110085] do_one_initcall+0x98/0x147 [ 3.110085] ? set_debug_rodata+0x11/0x11 [ 3.110085] kernel_init_freeable+0x164/0x1e0 [ 3.110085] ? rest_init+0xb0/0xb0 [ 3.110085] kernel_init+0xa/0x100 [ 3.110085] ret_from_fork+0x35/0x40 [ 3.110085] Code: 00 00 00 00 e8 ab ff ff ff 84 c0 74 02 f3 c3 80 3d 3b c3 64 01 00 75 f5 48 c7 c7 68 0b 81 98 c6 05 2b c3 64 01 01 e8 79 d7 a3 ff <0f> ff c3 66 0f 1f 44 00 00 8b 06 83 f8 ff 74 39 31 c9 39 f8 89 [ 3.110085] ---[ end trace a0068e1c68438a74 ]--- Fixes: f105b45bf77c ("net/mlx5: CQ hold/put API") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: IPSec, Add support for ESNAviad Yehezkel5-12/+185
Currently ESN is not supported with IPSec device offload. This patch adds ESN support to IPsec device offload. Implementing new xfrm device operation to synchronize offloading device ESN with xfrm received SN. New QP command to update SA state at the following: ESN 1 ESN 2 ESN 3 |-----------*-----------|-----------*-----------|-----------* ^ ^ ^ ^ ^ ^ ^ - marks where QP command invoked to update the SA ESN state machine. | - marks the start of the ESN scope (0-2^32-1). At this point move SA ESN overlap bit to zero and increment ESN. * - marks the middle of the ESN scope (2^31). At this point move SA ESN overlap bit to one. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Yossef Efraim <yossefe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5e: Added common function for to_ipsec_sa_entryAviad Yehezkel1-10/+19
New function for getting driver internal sa entry from xfrm state. All checks are done in one function. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: Add flow-steering commands for FPGA IPSec implementationAviad Yehezkel5-0/+762
In order to add a context to the FPGA, we need to get both the software transform context (which includes the keys, etc) and the source/destination IPs (which are included in the steering rule). Therefore, we register new set of firmware like commands for the FPGA. Each time a rule is added, the steering core infrastructure calls the FPGA command layer. If the rule is intended for the FPGA, it combines the IPs information with the software transformation context and creates the respective hardware transform. Afterwards, it calls the standard steering command layer. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: Refactor accel IPSec codeAviad Yehezkel5-221/+526
The current code has one layer that executed FPGA commands and the Ethernet part directly used this code. Since downstream patches introduces support for IPSec in mlx5_ib, we need to provide some abstractions. This patch refactors the accel code into one layer that creates a software IPSec transformation and another one which creates the actual hardware context. The internal command implementation is now hidden in the FPGA core layer. The code also adds the ability to share FPGA hardware contexts. If two contexts are the same, only a reference count is taken. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: Added required metadata capability for ipsecAviad Yehezkel1-2/+4
Currently our device requires additional metadata in packet to perform ipsec crypto offload. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: Export ipsec capabilitiesAviad Yehezkel4-24/+16
We will need that for ipsec verbs. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: IPSec, Add command V2 supportAviad Yehezkel5-41/+61
This patch adds V2 command support. New fpga devices support extended features (udp encap, esn etc...), this features require new hardware sadb format therefore we have a new version of commands to manipulate it. Signed-off-by: Yossef Efraim <yossefe@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5e: IPSec, Add support for ESP trailer removal by hardwareYossi Kuperman5-1/+68
Current hardware decrypts and authenticates incoming ESP packets. Subsequently, the software extracts the nexthdr field, truncates the trailer and adjusts csum accordingly. With this patch and a capable device, the trailer is being removed by the hardware and the nexthdr field is conveyed via PET. This way we avoid both the need to access the trailer (cache miss) and to compute its relative checksum, which significantly improve the performance. Experiment shows that trailer removal improves the performance by 2Gbps, (netperf). Both forwarding and host-to-host configurations. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: IPSec, Generalize sandbox QP commandsYossi Kuperman1-51/+65
The current code assume only SA QP commands. Refactor in order to pave the way for new QP commands: 1. Generic cmd response format. 2. SA cmd checks are in dedicated functions. 3. Aligned debug prints. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07net/mlx5: Use MLX5_IPSEC_DEV macro for ipsec capsSaeed Mahameed1-2/+1
Fix build break of mlx5_accel_ipsec_device_caps is not defined when MLX5_ACCEL is not selected, use MLX5_IPSEC_DEV instead which handles such case. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.