aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-09-24wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle1-1/+1
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: fix HT20/HT40 bandwidth switch on MT7620Daniel Golle1-0/+8
Add missing configuration of the channel bandwidth filter to the channel setup function for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move helper functions up in fileDaniel Golle1-20/+20
Move register access helper functions up to the head of the file so they can be used in all functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add TX LOFT calibration for MT7620Tomislav Požega2-0/+912
Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle1-1/+2
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXIQ calibration for MT7620Tomislav Požega1-0/+375
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXDCOC calibration for MT7620Tomislav Požega1-0/+60
Add RXDCOC calibration code from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add r calibration for MT7620Tomislav Požega2-0/+135
Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e0c34f233089bec4eb73826bc4f512166ee25934.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RF self TXDC calibration for MT7620Tomislav Požega1-0/+48
Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/dbb6e5a0c12d6101477bd09e83253091d21512c9.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move up and reuse busy wait functionsDaniel Golle1-53/+46
Move bbp_ready and rf_ready busy wait functions up in the code so they can more easily be used. Allow specifying register mask in rf_ready function which is useful for calibration routines which will be added in follow-up commits. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add support for external PA on MT7620Daniel Golle2-1/+52
Implement support for external PA connected to MT7620A. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [pozega.tomislav@gmail.com: use chanreg and dccal helpers.] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add throughput LED triggerDavid Bauer1-0/+18
This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Tested-by: Christoph Krapp <achterin@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: define RF5592 in init_eeprom routineTomislav Požega1-0/+2
Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592 PCIe radio (a single chip 2T2R 802.11abgn solution). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d7eccb2c7b8ec4cd360fa2007796abffc35abb0d.1663445157.git.daniel@makrotopia.org
2022-09-23sfc: correct filter_table_remove method for EF10 PFsAndy Moreton1-1/+1
A previous patch added a wrapper function to take a lock around efx_mcdi_filter_table_remove(), but only changed EF10 VFs' method table to call it. Change it in the PF method table too. Fixes: 77eb40749d73 ("sfc: move table locking into filter_table_{probe,remove} methods") Signed-off-by: Andy Moreton <andy.moreton@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220922211218.814-1-ecree@xilinx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: encapsulate updating three more registersAlex Elder1-26/+53
Create a new function that encapsulates setting the BCR, TX_CFG, and CLKON_CFG register values during hardware configuration. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: encapsulate updating the COUNTER_CFG registerAlex Elder1-13/+22
Create a new function that encapsulates setting the counter configuration register value for versions prior to IPA v4.5. Create another small function to represent configuring hardware timing regardless of version. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: encapsulate setting the FILT_ROUT_HASH_EN registerAlex Elder1-8/+13
Create a new function that encapsulates setting the register flag that disables filter and routing table hashing for IPA v4.2. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: tidy up register enum definitionsAlex Elder1-21/+21
Update a few enumerated type definitions in "ipa_reg.h" so that the values assigned to each member align on the same column. Where a "TX" or "RX" (or both) comment is present, move that annotation into a separate comment between the member name and its value. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: define BCR values using an enumAlex Elder3-20/+18
The backward compatibility register (BCR) has a set of bit flags that indicate ways in which the IPA hardware should operate in a backward compatible way. The register is not supported starting with IPA v4.5, and where it is supported, defined bits all have the same numeric value. Redefine these flags using an enumerated type, with each member's value representing the bit position that encodes it in the BCR. This replaces all of the single-bit field masks previously defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: rearrange functions for similarityAlex Elder1-45/+41
Both aggr_time_limit_encode() and hol_block_timer_encode() figure out how to encode a millisecond time value so it can be programmed into a register. Rearranging them a bit can make their similarity more obvious, with both taking essentially the same form. To do this: - Return 0 immediately in aggr_time_limit_encode() if the microseconds value supplied is zero. - Reverse the test at top of aggr_time_limit_encode(), so we compute and return the Qtime value in the "true" block, and compute the result the old way otherwise. - Open-code (and eliminate) hol_block_timer_qtime_encode() at the top of hol_block_timer_encode() in the case we use Qtimer. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: introduce ipa_qtime_val()Alex Elder1-36/+44
Create a new function ipa_qtime_val() which returns a value that indicates what should be encoded for a register with a time field expressed using Qtime. Use it to factor out common code in aggr_time_limit_encoded() and hol_block_timer_qtime_val(). Rename aggr_time_limit_encoded() and hol_block_timer_qtime_val() so their names are both verbs ending in "encode". Rename the "limit" argument to the former to be "milliseconds" for consistency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: ipa: don't use u32p_replace_bits()Alex Elder1-2/+2
In two spots we use u32_replace_bits() to replace a set of bits in a register while preserving the rest. Both of those cases just zero the bits being replaced, and this can be done more simply without using that function. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextJakub Kicinski2-249/+230
Marc Kleine-Budde says: ==================== pull-request: can-next 2022-09-23 The first 2 patches are by Ziyang Xuan and optimize registration and the sending in the CAN BCM protocol a bit. The next 8 patches target the gs_usb driver. 7 are by me and first fix the time hardware stamping support (added during this net-next cycle), rename a variable, convert the usb_control_msg + manual kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error handling and add switchable termination support. The patch by Rhett Aultman and Vasanth Sadhasivan convert the driver from usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER. The last patch is by Shang XiaoJing and removes an unneeded call to dev_err() from the ctucanfd driver. * tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: Remove redundant dev_err call can: gs_usb: remove dma allocations can: gs_usb: add switchable termination support can: gs_usb: gs_make_candev(): clean up error handling can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}() can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev can: gs_usb: gs_can_open(): initialize time counter before starting device can: gs_usb: add missing lock to protect struct timecounter::cycle_last can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv() can: bcm: check the result of can_send() in bcm_can_tx() can: bcm: registration process optimization in bcm_module_init() ==================== Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: mt7531: ensure all MACs are powered down before resetAlexander Couzens1-0/+4
The datasheet [1] explicit describes it as requirement for a reset. [1] MT7531 Reference Manual for Development Board rev 1.0, page 735 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: mt7531: only do PLL once after the resetAlexander Couzens1-6/+9
Move the PLL init of the switch out of the pad configuration of the port 6 (usally cpu port). Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for outbound traffic on port 5 or port 6. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Cc: stable@vger.kernel.org Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: macsec: remove the prepare flag from the MACsec offloading contextAntoine Tenart1-1/+0
Now that the MACsec offloading preparation phase was removed from the MACsec core implementation as well as from drivers implementing it, we can safely remove the flag representing it. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net/mlx5e: macsec: remove checks on the prepare phaseAntoine Tenart1-36/+0
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: atlantic: macsec: remove checks on the prepare phaseAntoine Tenart1-57/+0
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: phy: mscc: macsec: remove checks on the prepare phaseAntoine Tenart1-41/+0
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: macsec: remove the prepare phase when offloadingAntoine Tenart1-13/+0
The hardware offloading in MACsec was initially supported using 2 phases. This was proposed in the RFC as this could have allowed easier fallback to the software implementation if the hardware did not support a feature or had enough entries already. But this fallback wasn't implemented and might not be a good idea after all. In addition it turned out this logic didn't mapped well the hardware logic and device drivers were mostly ignoring the preparation phase. Let's remove this as it does not offer any advantage and is ignored by drivers. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: atlantic: macsec: make the prepare phase a noopAntoine Tenart1-45/+45
In preparation for removing the MACsec h/w offloading preparation phase, make it a no-op in the Atlantic driver. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: phy: mscc: macsec: make the prepare phase a noopAntoine Tenart1-49/+55
In preparation for removing the MACsec h/w offloading preparation phase, make it a no-op in the MSCC phy driver. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23can: ctucanfd: Remove redundant dev_err callShang XiaoJing1-1/+0
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/all/20220923095835.14647-1-shangxiaojing@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: remove dma allocationsVasanth Sadhasivan1-33/+6
DMA allocated buffers are a precious resource. If there is no need for DMA allocations, then it might be worth to use non-dma allocated buffers. After testing the gs_usb driver with and without DMA allocation, there does not seem to be a significant change in latency or CPU utilization either way. Therefore, DMA allocation is not necessary and removed. Internal buffers used within urbs were managed and freed manually. These buffers are no longer needed to be managed by the driver. The URB_FREE_BUFFER flag, allows for the buffers in question to be automatically freed. Co-developed-by: Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by: Vasanth Sadhasivan <vasanth.sadhasivan@samsara.com> Link: https://lore.kernel.org/all/20220920154724.861093-2-rhett.aultman@samsara.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: add switchable termination supportMarc Kleine-Budde1-1/+78
The candleLight community is working on switchable termination support for the candleLight firmware. As the the Linux CAN framework supports switchable termination add this feature to the gs_usb driver. Devices supporting the feature should set the GS_CAN_FEATURE_TERMINATION and implement the GS_USB_BREQ_SET_TERMINATION and GS_USB_BREQ_GET_TERMINATION control messages. For now the driver assumes for activated termination the standard termination value of 120Ω. Link: https://lore.kernel.org/all/20220923074114.662045-1-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/issues/92 Link: https://github.com/candle-usb/candleLight_fw/pull/109 Link: https://github.com/candle-usb/candleLight_fw/pull/108 Cc: Daniel Trevitz <daniel.trevitz@wika.com> Cc: Ryan Edwards <ryan.edwards@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: gs_make_candev(): clean up error handlingMarc Kleine-Budde1-8/+13
Introduce a label to free the allocated candev in case of an error and make use of if. Fix a memory leak if the extended bit timing cannot be read. Extend the error messages to print the number of the failing channel and the symbolic error name. Link: https://lore.kernel.org/all/20220921193902.575416-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()Marc Kleine-Budde1-194/+107
Convert the driver to use usb_control_msg_{send,recv}() instead of usb_control_msg(). These functions allow the data to be placed on the stack. This makes the driver a lot easier as we don't have to deal with dynamically allocated memory. Link: https://lore.kernel.org/all/20220921193902.575416-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to devMarc Kleine-Budde1-3/+3
Most of the driver uses the variable "dev" to point to the struct gs_can. Use the same name in gs_cmd_reset(), too. Rename gsdev to dev. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220921193902.575416-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: gs_can_open(): initialize time counter before starting deviceMarc Kleine-Budde1-4/+6
On busy networks the CAN controller might receive CAN frames directly after starting it but before the timecounter is setup. This will lead to NULL pointer deref while converting the converting the CAN frame's timestamp with the timecounter. Close the race window by setting up the timecounter before starting the CAN controller. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Link: https://lore.kernel.org/all/20220921081329.385509-1-mkl@pengutronix.de Cc: John Whittington <git@jbrengineering.co.uk Tested-by: John Whittington <git@jbrengineering.co.uk> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: add missing lock to protect struct timecounter::cycle_lastMarc Kleine-Budde1-5/+18
The struct timecounter::cycle_last is a 64 bit variable, read by timecounter_cyc2time(), and written by timecounter_read(). On 32 bit architectures this is not atomic. Add a spinlock to protect access to struct timecounter::cycle_last. In the gs_usb_timestamp_read() callback the lock is dropped to execute a sleeping synchronous USB transfer. This is safe, as the variable we want to protect is accessed during this call. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Link: https://lore.kernel.org/all/20220920100416.959226-3-mkl@pengutronix.de Cc: John Whittington <git@jbrengineering.co.uk> Tested-by: John Whittington <git@jbrengineering.co.uk> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()Marc Kleine-Budde1-2/+1
The 2nd argument of usb_control_msg_recv() is the "endpoint", usb_control_msg_recv() will internally convert the endpoint into a pipe with usb_rcvctrlpipe(). In gs_usb_get_timestamp() not the endpoint "0" is passed, but the pipe. This worked by accident as endpoint is a __u8 and the lowest 8 bits of the pipe are 0. Fix this copy/paste error by using the correct endpoint of "0". Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Link: https://lore.kernel.org/all/20220920100416.959226-2-mkl@pengutronix.de Cc: John Whittington <git@jbrengineering.co.uk> Tested-by: John Whittington <git@jbrengineering.co.uk> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-23net: macb: Fix ZynqMP SGMII non-wakeup source resume failureRadhey Shyam Pandey1-0/+4
When GEM is in SGMII mode and disabled as a wakeup source, the power management controller can power down the entire full power domain(FPD) if none of the FPD devices are in use. Incase of FPD off, there are below ethernet link up issues on non-wakeup suspend/resume. To fix it add phy_exit() in suspend and phy_init() in the resume path which reinitializes PS GTR SGMII lanes. $ echo +20 > /sys/class/rtc/rtc0/wakealarm $ echo mem > /sys/power/state After resume: $ ifconfig eth0 up xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout phy phy-fd400000.phy.0: phy poweron failed --> -110 xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout SIOCSIFFLAGS: Connection timed out phy phy-fd400000.phy.0: phy poweron failed --> -110 Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: lan966x: Add offload support for taprioHoratiu Vultur7-3/+560
Lan966x switch supports time-based egress shaping in hardware according to IEEE 802.1Qbv. Add support for TAS configuration on egress port of lan966x switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: lan966x: Add registers used by taprioHoratiu Vultur1-0/+159
Add registers that are used by taprio to configure the HW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: lan966x: Add offload support for mqprioHoratiu Vultur5-2/+71
Implement mqprio qdisc support using tc command. The HW supports 8 priority queues from highest (7) to lowest (0). Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: lan966x: Add define for number of priority queues NUM_PRIO_QUEUESHoratiu Vultur2-1/+3
Add a define for the number of priority queues on lan966x. Because there will be more checks for this, so instead of using hardcoded value all over the place add a define for this. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23xen-netback: use kstrdup instead of open-coding itMinghao Chi1-2/+1
use kstrdup instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23tun: support not enabling carrier in TUNSETIFFPatrick Rohr1-3/+6
This change adds support for not enabling carrier during TUNSETIFF interface creation by specifying the IFF_NO_CARRIER flag. Our tests make heavy use of tun interfaces. In some scenarios, the test process creates the interface but another process brings it up after the interface is discovered via netlink notification. In that case, it is not possible to create a tun/tap interface with carrier off without it racing against the bring up. Immediately setting carrier off via TUNSETCARRIER is still too late. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: dsa: mt7530: add support for in-band link statusDaniel Golle2-13/+38
Read link status from SGMII PCS for in-band managed 2500Base-X and 1000Base-X connection on a MAC port of the MT7531. This is needed to get the SFP cage working which is connected to SGMII interface of port 5 of the MT7531 switch IC on the Bananapi BPi-R3 board. While at it also handle an_complete for both the autoneg and the non-autoneg codepath. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-23net: phy: aquantia: Add support for rate matchingSean Anderson1-4/+47
This adds support for rate matching for phys similar to the AQR107. We assume that all phys using aqr107_read_status support rate matching. However, it could be possible to determine support based on the firmware revision if there are phys discovered which do not support rate matching. However, as rate matching is advertised in the datasheets for these phys, I suspect it is supported most boards. Despite the name, the "config" registers are updated with the current rate matching method (if any). Because they appear to be updated automatically, I don't know if these registers can be used to disable rate matching. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.