| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trap door number is a 4-bit number divided in two regions (3 and 1-bit).
Both values were not masked properly. This bug does not affect supported
devices as they use up to port 7 (ext2). It would only be a problem if
the driver becomes compatible with 10-port switches like RTL8370MB and
RTL8310SR.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
External interfaces can be configured, even if they are not CPU ports.
The first CPU port will also be the trap port (for receiving trapped
frames from the switch).
The CPU information was dropped from chip data as it was not used
outside setup. The only other place it was used is when it wrongly
checks for CPU port when it should check for extint.
The supported modes check now uses port type and not port usage.
As a byproduct, more than one CPU can be configured. although this
might not work well with DSA setups. Also, this driver is still only
blindly forwarding all traffic to CPU port(s).
This change was not tested in a device with multiple active external
interfaces ports.
realtek_priv->cpu_port is now only used by rtl8366rb.c
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RTL8367RB-VB is a 5+2 port 10/100/1000M Ethernet switch.
It is similar to RTL8367S but in this version, both
external interfaces are RGMII.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realtek's RTL8367S, a 5+2 port 10/100/1000M Ethernet switch.
It shares the same driver family (RTL8367C) with other models
as the RTL8365MB-VC. Its compatible string is "realtek,rtl8367s".
It was tested only with MDIO interface (realtek-mdio), although it might
work out-of-the-box with SMI interface (using realtek-smi).
This patch was based on an unpublished patch from Alvin Šipraga
<alsi@bang-olufsen.dk>.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of a fixed CPU port, assume that DSA is correct.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"extport" 0, 1, 2 was used to reference external ports id (ext0, ext1,
ext2). Meanwhile, port 0..9 is used as switch ports, including external
ports. "extport" was renamed to extint to make it clear it does not mean
the port number but the external interface number id.
The macros that map extint numbers to registers addresses now use inline
ifs instead of binary arithmetic.
Realtek uses in docs and drivers EXT_PORT0 (GMAC1) and EXT_PORT1
(GMAC2), with EXT_PORT0 being converted to ext_id == 1 and so on. It
might introduce some confusing while reading datasheets but it will not
be exposed to users.
"extint" was hardcoded to 1. However, some chips have multiple external
interfaces. It's not right to assume the CPU port uses extint 1 nor that
all extint are CPU ports. Now it came from a map between port number and
external interface id number.
This patch still does not allow multiple CPU ports nor extint as a non
CPU port.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver is a mdio_driver instead of a platform driver (like
realtek-smi).
ds_ops was duplicated for smi and mdio usage as mdio interfaces uses
phy_{read,write} in ds_ops and the presence of phy_read is incompatible
with external slave_mii_bus allocation.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Preparing for multiple interfaces support, the drivers
must be independent of realtek-smi.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the only two direct calls from subdrivers to realtek-smi.
Now they are called from realtek_priv. Subdrivers can now be
linked independently from realtek-smi.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to adding other interfaces, the private data structure
was renamed to priv. Also, realtek_smi_variant and realtek_smi_ops
were renamed to realtek_variant and realtek_ops as those structs are
not SMI specific.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removed kdoc mark for incomplete struct description.
Added a return description for rtl8366rb_drop_untagged.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ethtool rx-buf-len is for setting receive buffer size,
support setting it via ethtool -G parameter and getting
it via ethtool -g parameter.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aggregation rings imply header-data split.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new microchip,synclko-disable property which can be specified
to disable the reference clock output from the device if not required
by the board design.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get rid of unnecessary if check on tx_desc pointer in
mvneta_xdp_submit_frame routine since num_frames is always greater than
0 and tx_desc pointer is always initialized.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert sparx5 to use the mac_select_interface rather than using
phylink_set_pcs(). The intention here is to unify the approach for
PCS and eventually remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The call to brcm_alt_fw_path in brcmf_fw_get_firmwares is not protected
by a check to the validity of the fwctx->req->board_type pointer. This
results in a crash in strlcat when, for example, the WLAN chip is found
in a USB dongle.
Prevent the crash by adding the necessary check.
See: https://github.com/raspberrypi/linux/issues/4833
Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220118154514.3245524-1-phil@raspberrypi.com
|
|
ath.git patches for v5.18. Major changes:
ath11k
* add LDPC FEC type in 802.11 radiotap header
* enable RX PPDU stats in monitor co-exist mode
wcn36xx
* implement survey reporting
|
|
For the NL80211_REGDOM_SET_BY_USER hint from cfg80211, it set the new
alpha2 code to ath11k, then ath11k send WMI_SET_INIT_COUNTRY_CMDID to
firmware for all chips currently. When test with WCN6855/QCA6390 chips,
this WMI CMD leads firmware crash.
For AP based chips(ipq8074/qcn9074), WMI_SET_INIT_COUNTRY_CMDID is used
to send to firmware, for STATION based chips(WCN6855/QCA6390), it need to
use another WMI CMD WMI_SET_CURRENT_COUNTRY_CMDID.
Add flag current_cc_support in hardware parameters, it is used to
distinguish AP/STA platform. After that, the firmware will work
normal and the regulatory feature works well for QCA6390/WCN6855.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220119041355.32014-1-quic_wgong@quicinc.com
|
|
When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Fixes: c3a7d7eb4c98 ("ath11k: add 6 GHz params in peer assoc command")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220119034211.28622-1-quic_wgong@quicinc.com
|
|
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com
|
|
There is no point in accepting frames with a wrong or missing checksum,
at least not outside of a promiscuous setting. Set the right flag by
default in the hwsim driver to ensure checksums are not ignored.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125122540.855604-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
In Spectrum-2 and later ASICs, each TCAM region has a default action
that is executed in case a packet did not match any rule in the region.
The location of the action in the database (KVDL) is computed by adding
the region's index to a base value.
Some TCAM regions are not exposed to the host and used internally by the
device. Allocate KVDL entries for the default actions of these regions
to avoid the host from overwriting them.
With mlxsw, lookups in the internal regions are not currently performed,
but it is a good practice not to overwrite their default actions.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When processing events generated by the device's firmware, the driver
protects itself from events reported for non-existent local ports, but
not for the CPU port (local port 0), which exists, but does not have all
the fields as any local port.
This can result in a NULL pointer dereference when trying access
'struct mlxsw_sp_port' fields which are not initialized for CPU port.
Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware")
already handled such issue by bailing early when processing a PUDE event
reported for the CPU port.
Generalize the approach by moving the check to a common function and
making use of it in all relevant places.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For event traps which are used in core, avoid having a separate trap
group for each event. Instead of that introduce a single core event trap
group and use it for all event traps.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions belong to core.c alongside the functions that
register/unregister a single trap. Move it there. Make the functions
possibly usable by other parts of mlxsw code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of initializing the trap groups used by core in spectrum.c
over op, do it directly in core.c
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call inits the EMAD group, but other groups as well. Therefore, move
it out of EMAD init code and call it before.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling the same code four times, do it in a loop over array
which contains trap grups to be set.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure to reset the tx_timer_active flag in xgbe_stop(),
otherwise a port restart may result in tx timeout due to
uncleared flag.
Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Saeed Mahameed says:
====================
mlx5-updates-2022-01-27
1) Dima, adds an internal mlx5 steering callback per steering provider
(FW vs SW steering), to advertise steering capabilities implemented by
each module, this helps upper modules in mlx5 to know what is
supported and what's not without the need to tell what is the underlying
steering mode.
2nd patch is the usecase where this interface is used to implement
Vlan Push/pop for uplink with SW steering, where in FW mode it's not
supported yet.
2) Roi Dayan improves code readability and maintainability
as preparation step for multi attribute instance per flow
in mlx5 TC module
Currently the mlx5_flow object contains a single mlx5_attr instance.
However, multi table actions (e.g. CT) instantiate multiple attr instances.
This is a refactoring series in a preparation to support multiple
attribute instances per flow.
The commits prepare functions to get attr instance instead of using
flow->attr and also using attr->flags if the flag is more relevant
to be attr flag and not a flow flag considering there will be multiple
attr instances. i.e. CT and SAMPLE flags.
* tag 'mlx5-updates-2022-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: VLAN push on RX, pop on TX
net/mlx5: Introduce software defined steering capabilities
net/mlx5: Remove unused TIR modify bitmask enums
net/mlx5e: CT, Remove redundant flow args from tc ct calls
net/mlx5e: TC, Store mapped tunnel id on flow attr
net/mlx5e: Test CT and SAMPLE on flow attr
net/mlx5e: Refactor eswitch attr flags to just attr flags
net/mlx5e: CT, Don't set flow flag CT for ct clear flow
net/mlx5e: TC, Hold sample_attr on stack instead of pointer
net/mlx5e: TC, Reject rules with multiple CT actions
net/mlx5e: TC, Refactor mlx5e_tc_add_flow_mod_hdr() to get flow attr
net/mlx5e: TC, Pass attr to tc_act can_offload()
net/mlx5e: TC, Split pedit offloads verify from alloc_tc_pedit_action()
net/mlx5e: TC, Move pedit_headers_action to parse_attr
net/mlx5e: Move counter creation call to alloc_flow_attr_counter()
net/mlx5e: Pass attr arg for attaching/detaching encaps
net/mlx5e: Move code chunk setting encap dests into its own function
====================
Link: https://lore.kernel.org/r/20220127204007.146300-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-01-27
Christophe Jaillet removes useless DMA-32 fallback calls from applicable
Intel drivers and simplifies code as a result of the removal.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: Remove useless DMA-32 fallback configuration
igb: Remove useless DMA-32 fallback configuration
igc: Remove useless DMA-32 fallback configuration
ice: Remove useless DMA-32 fallback configuration
iavf: Remove useless DMA-32 fallback configuration
e1000e: Remove useless DMA-32 fallback configuration
i40e: Remove useless DMA-32 fallback configuration
ixgbevf: Remove useless DMA-32 fallback configuration
ixgbe: Remove useless DMA-32 fallback configuration
ixgb: Remove useless DMA-32 fallback configuration
====================
Link: https://lore.kernel.org/r/20220127215224.422113-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors.
Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some older NIC hardware isn't capable of doing VLAN push on RX and pop
on TX.
A workaround has been added in software to support it, but it has a
performance penalty since it requires a hairpin + loopback.
There's no such limitation with the newer NICs, so no need to pay the
price of the w/a. With this change the software w/a is disabled for
certain HW versions and steering modes that support it.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are two different internal steering modes, abstracted from the
rest of the driver. In order to keep upper layer of the driver agnostic
to the differences in capabilities of the steering modes, this patch
introduces mlx5_fs_get_capabilities() API to check if a certain software
defined capability is supported. It differs from the capabilities
exposed by the hardware, as it takes into account the flow steering mode
(SMFS/DMFS) currently enabled.
This implementation supports only two capability flags:
MLX5_FLOW_STEERING_CAP_VLAN_PUSH_ON_RX
MLX5_FLOW_STEERING_CAP_VLAN_POP_ON_TX
They map to DR_ACTION_STATE_PUSH_VLAN and DR_ACTION_STATE_POP_VLAN
actions, implemented in SW steering earlier in commit f5e22be534e0
("net/mlx5: DR, Split modify VLAN state to separate pop/push states").
Which enables using of pop/push vlan without restrictions, e.g. doing
vlan pop on TX and RX, compared to FW steering that supports only vlan
pop on RX and push on TX.
Other capabilities can be added in the future.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The flow arg is not being used so remove it.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In preparation for multiple attr instances the tunnel_id should
be attr specific and not flow specific.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the mlx5_flow object contains a single mlx5_attr instance.
However, multi table actions (e.g. CT) instantiate multiple attr instances.
Prepare for multiple attr instances by testing for CT or SAMPLE flag on attr
flags instead of flow flag.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The flags are flow attrs and not esw specific attr flags.
Refactor to remove the esw prefix and move from eswitch.h
to en_tc.h where struct mlx5_flow_attr exists.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ct clear action is a normal flow with a modify header for registers to
0. there is no need for any special handling in tc_ct.c.
Parsing of ct clear action still allocates mod acts to set 0 on the
registers and the driver continue to add a normal rule with modify hdr
context.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In later commit we are going to instantiate multiple attr instances
for flow instead of single attr.
Parsing TC sample allocates a new memory but there is no symmetric
cleanup in the infrastructure.
To avoid asymmetric alloc/free use sample_attr as part of the flow attr
and not allocated and held as a pointer.
This will avoid a cleanup leak when sample action is not on the first
attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The driver doesn't support multiple CT actions.
Multiple CT clear actions are ok as they are redundant also with
another CT actions.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In later commit we are going to instantiate multiple attr instances
for flow instead of single attr.
Make sure mlx5e_tc_add_flow_mod_hdr() use the correct attr and not flow->attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In later commit we are going to instantiate multiple attr instances
for flow instead of single attr.
Make sure the parsing using correct attr and not flow->attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Split pedit verify part into a new subfunction for better
maintainability.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
Colin Ian King
Luiz Angelo Daros de Luca
Subbaraya Sundeep
Jakub Kicinski
Robert Hancock
Lorenzo Bianconi
Yuji Ishikawa
Russell King (Oracle)
Phil Elwell
Kalle Valo
Wen Gong
Pavel Skripkin
Miquel Raynal
Ido Schimmel
Amit Cohen
Jiri Pirko
Raju Rangoju
Shyam Sundar S K
Dima Chumak
Roi Dayan