aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-12-28net: lantiq_etop: add blank line after declarationAleksander Jan Bajkowski1-0/+1
This patch adds a missing line after the declaration and fixes the checkpatch warning: WARNING: Missing a blank line after declarations + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://lore.kernel.org/r/20211228220031.71576-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28net: lantiq_etop: add missing comment for wmb()Aleksander Jan Bajkowski1-0/+1
This patch adds the missing code comment for memory barrier call and fixes checkpatch warning: WARNING: memory barrier without comment + wmb(); Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://lore.kernel.org/r/20211228214910.70810-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28r8169: don't use pci_irq_vector() in atomic contextThomas Gleixner1-7/+7
Since referenced change pci_irq_vector() can't be used in atomic context any longer. This conflicts with our usage of this function in rtl8169_netpoll(). Therefore store the interrupt number in struct rtl8169_private. Fixes: 495c66aca3da ("genirq/msi: Convert to new functions") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3cd24763-f307-78f5-76ed-a5fbf315fb28@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28igc: Fix TX timestamp support for non-MSI-X platformsJames McLaughlin1-0/+6
Time synchronization was not properly enabled on non-MSI-X platforms. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28igc: Do not enable crosstimestamping for i225-V modelsVinicius Costa Gomes1-1/+14
It was reported that when PCIe PTM is enabled, some lockups could be observed with some integrated i225-V models. While the issue is investigated, we can disable crosstimestamp for those models and see no loss of functionality, because those models don't have any support for time synchronization. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/ Reported-by: Stefan Dietrich <roots@gmx.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28ixgbevf: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbevf driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28ixgbe: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbe driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28igc: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. igc driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28igb: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. igb driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28ice: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ice driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28iavf: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. iavf driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28i40e: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. i40e driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28e1000: switch to napi_build_skb()Alexander Lobakin1-1/+1
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx element. e1000 driver runs Tx completion polling cycle right before the Rx one. Now that e1000 uses napi_consume_skb() to put skbuff_heads of completed entries into the cache, it will never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx and increase throughput. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28e1000: switch to napi_consume_skb()Alexander Lobakin1-5/+7
In order to take the best from per-cpu NAPI skbuff_head caches and CPU cycles, let's switch from dev_kfree_skb_any(), which passes skb back to the mm layer, to napi_consume_skb(), which feeds those caches on non-zero budget instead (falls back to the former on 0). Do the replacement in e1000_unmap_and_free_tx_resource(). There are 4 call sites of this function throughout the driver: * e1000_clean_tx_ring(). Slowpath, process context, cleans the whole Tx ring on ifdown. Use budget of 0 here; * e1000_tx_map(). Hotpath, net Tx softirq, unmaps the buffers in case of error. Use 0 as well; * e1000_clean_tx_irq(). Hotpath, NAPI Tx completion polling cycle. As the driver doesn't count completed Tx entries towards the NAPI budget, just use the poll budget of 64 to utilize caches. Apart from being a preparation for switching to napi_build_skb(), this is useful on its own as well, as napi_consume_skb() flushes skb caches by batches of 32 instead of one-at-a-time. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-28net: lantiq_xrx200: fix statistics of received bytesAleksander Jan Bajkowski1-1/+1
Received frames have FCS truncated. There is no need to subtract FCS length from the statistics. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28net: ag71xx: Fix a potential double free in error handling pathsChristophe JAILLET1-15/+8
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there is no need to call free_netdev() explicitly or there will be a double free(). Simplify all error handling paths accordingly. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net:Remove initialization of static variables to 0Wen Zhiwei1-3/+3
Delete the initialization of three static variables because it is meaningless. Signed-off-by: Wen Zhiwei <wenzhiwei@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: usb: pegasus: Do not drop long Ethernet framesMatthias-Christian Ott1-2/+2
The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames that are longer than 1518 octets, for example, Ethernet frames that contain 802.1Q VLAN tags. The frames are sent to the pegasus driver via USB but the driver discards them because they have the Long_pkt field set to 1 in the received status report. The function read_bulk_callback of the pegasus driver treats such received "packets" (in the terminology of the hardware) as errors but the field simply does just indicate that the Ethernet frame (MAC destination to FCS) is longer than 1518 octets. It seems that in the 1990s there was a distinction between "giant" (> 1518) and "runt" (< 64) frames and the hardware includes flags to indicate this distinction. It seems that the purpose of the distinction "giant" frames was to not allow infinitely long frames due to transmission errors and to allow hardware to have an upper limit of the frame size. However, the hardware already has such limit with its 2048 octet receive buffer and, therefore, Long_pkt is merely a convention and should not be treated as a receive error. Actually, the hardware is even able to receive Ethernet frames with 2048 octets which exceeds the claimed limit frame size limit of the driver of 1536 octets (PEGASUS_MTU). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matthias-Christian Ott <ott@mirix.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27atlantic: Fix buff_ring OOB in aq_ring_rx_cleanZekun Shen1-0/+8
The function obtain the next buffer without boundary check. We should return with I/O error code. The bug is found by fuzzing and the crash report is attached. It is an OOB bug although reported as use-after-free. [ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9 [ 4.806505] [ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34 [ 4.809030] Call Trace: [ 4.809343] dump_stack+0x76/0xa0 [ 4.809755] print_address_description.constprop.0+0x16/0x200 [ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.813183] __kasan_report.cold+0x37/0x7c [ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.814393] kasan_report+0xe/0x20 [ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic] [ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic] [ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic] [ 4.817746] ? __next_timer_interrupt+0xba/0xf0 [ 4.818322] net_rx_action+0x363/0xbd0 [ 4.818803] ? call_timer_fn+0x240/0x240 [ 4.819302] ? __switch_to_asm+0x40/0x70 [ 4.819809] ? napi_busy_loop+0x520/0x520 [ 4.820324] __do_softirq+0x18c/0x634 [ 4.820797] ? takeover_tasklets+0x5f0/0x5f0 [ 4.821343] run_ksoftirqd+0x15/0x20 [ 4.821804] smpboot_thread_fn+0x2f1/0x6b0 [ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.823041] ? __kthread_parkme+0x80/0x100 [ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.824301] kthread+0x2b5/0x3b0 [ 4.824723] ? kthread_create_on_node+0xd0/0xd0 [ 4.825304] ret_from_fork+0x35/0x40 Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: ethernet: ti: davinci_emac: Use platform_get_irq() to get the interruptLad Prabhakar1-27/+42
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq() for DT users only. While at it propagate error code in case request_irq() fails instead of returning -EBUSY. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: xilinx: emaclite: Use platform_get_irq() to get the interruptLad Prabhakar1-6/+3
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: ethoc: Use platform_get_irq() to get the interruptLad Prabhakar1-6/+3
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27fsl/fman: Use platform_get_irq() to get the interruptLad Prabhakar1-16/+16
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). While doing so return error pointer from read_dts_node() as platform_get_irq() may return -EPROBE_DEFER. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: pxa168_eth: Use platform_get_irq() to get the interruptLad Prabhakar1-4/+5
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27ethernet: netsec: Use platform_get_irq() to get the interruptLad Prabhakar1-7/+6
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: wwan: iosm: Keep device at D0 for s2idle caseKai-Heng Feng1-0/+3
We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops. This prevent those laptops to stay in s2idle state. >From what I can understand, the intention of ipc_pcie_suspend() is to put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the device at D0. However, the device can still be put to D3hot/D3cold by PCI core. So explicitly let PCI core know this device should stay at D0, to solve the spurious wakeup. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: wwan: iosm: Let PCI core handle PCI power transitionKai-Heng Feng1-47/+2
pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power transition for system-wide suspend and resume, so it's not necessary to do it in the driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: lan966x: Fix the vlan used by host portsHoratiu Vultur1-3/+3
The blamed commit changed the vlan used by the host ports to be 4095 instead of 0. Because of this change the following issues are seen: - when the port is probed first it was adding an entry in the MAC table with the wrong vlan (port->pvid which is default 0) and not HOST_PVID - when the port is removed from a bridge, it was using the wrong vlan to add entries in the MAC table. It was using the old PVID and not the HOST_PVID This patch fixes this two issues by using the HOST_PVID instead of port->pvid. Fixes: 6d2c186afa5d5d ("net: lan966x: Add vlan support.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Use page frag RX buffers for better software GRO performanceJakub Kicinski1-12/+15
If NETIF_F_GRO_HW is disabled, the existing driver code uses kmalloc'ed data for RX buffers. This causes inefficient SW GRO performance because the GRO data is merged using the less efficient frag_list. Use netdev_alloc_frag() and friends instead so that GRO data can be merged into skb_shinfo(skb)->frags for better performance. [Use skb_free_frag() - Vikas Gupta] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: convert to xdp_do_flushEdwin Peer1-1/+1
The xdp_do_flush_map function has been replaced with the more general xdp_do_flush(). Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support CQE coalescing mode in ethtoolMichael Chan1-1/+23
Support showing and setting the CQE mode in ethtool. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support configurable CQE coalescing modeMichael Chan2-5/+12
CQE coalescing mode is the same as the timer reset coalescing mode on Broadcom devices. Currently this mode is always enabled if it is supported by the device. Restructure the code slightly to support dynamically changing this mode. Add a flags field to struct bnxt_coal. Initially, the CQE flag will be set for the RX and TX side if the device supports it. We need to move bnxt_init_dflt_coal() to set up default coalescing until the capability is determined. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: enable interrupt sampling on 5750X for DIMAndy Gospodarek1-1/+13
5750X (P5) chips handle receiving packets on the NQ rather than the main completion queue so we need to get and set stats from the correct spots for dynamic interrupt moderation. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Log error report for dropped doorbellMichael Chan1-2/+8
Log the unrecognized error report type value as well. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Add event handler for PAUSE Storm eventSomnath Kotur1-0/+3
FW has been modified to send a new async event when it detects a pause storm. Register for this new event and log it upon receipt. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-24net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_registerMiaoqian Lin1-2/+2
The fixed_phy_get_gpiod function() returns NULL, it doesn't return error pointers, using NULL checking to fix this.i Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20211224021500.10362-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-24net: phy: micrel: Add config_init for LAN8814Horatiu Vultur1-0/+32
Add config_init for LAN8814. This function is required for the following reasons: - we need to make sure that the PHY is reset, - disable ANEG with QSGMII PCS Host side - swap the MDI-X A,B transmit so that there will not be any link flip-flaps when the PHY gets a link. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-24net: wan/lmc: fix spelling of "its"Randy Dunlap1-1/+1
Use the possessive "its" instead of the contraction of "it is" ("it's") in user messages. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23Merge tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski12-46/+121
Saeed Mahameed says: ==================== mlx5 fixes 2021-12-22 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()' net/mlx5e: Delete forward rule for ct or sample action net/mlx5e: Fix ICOSQ recovery flow for XSK net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled net/mlx5e: Wrap the tx reporter dump callback to extract the sq net/mlx5: Fix tc max supported prio for nic mode net/mlx5: Fix SF health recovery flow net/mlx5: Fix error print in case of IRQ request failed net/mlx5: Use first online CPU instead of hard coded CPU net/mlx5: DR, Fix querying eswitch manager vport for ECPF net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources ==================== Link: https://lore.kernel.org/r/20211223190441.153012-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski23-147/+268
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23Merge tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds24-151/+272
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - revert "tipc: use consistent GFP flags" Previous releases - regressions: - igb: fix deadlock caused by taking RTNL in runtime resume path - accept UFOv6 packages in virtio_net_hdr_to_skb - netfilter: fix regression in looped (broad|multi)cast's MAC handling - bridge: fix ioctl old_deviceless bridge argument - ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor, avoid stalls when multiple sockets use an interface Previous releases - always broken: - inet: fully convert sk->sk_rx_dst to RCU rules - veth: ensure skb entering GRO are not cloned - sched: fix zone matching for invalid conntrack state - bonding: fix ad_actor_system option setting to default - nf_tables: fix use-after-free in nft_set_catchall_destroy() - lantiq_xrx200: increase buffer reservation to avoid mem corruption - ice: xsk: avoid leaking app buffers during clean up - tun: avoid double free in tun_free_netdev" * tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M r8152: sync ocp base r8152: fix the force speed doesn't work for RTL8156 net: bridge: fix ioctl old_deviceless bridge argument net: stmmac: ptp: fix potentially overflowing expression net: dsa: tag_ocelot: use traffic class to map priority on injected header veth: ensure skb entering GRO are not cloned. asix: fix wrong return value in asix_check_host_enable() asix: fix uninit-value in asix_mdio_read() sfc: falcon: Check null pointer of rx_queue->page_ring sfc: Check null pointer of rx_queue->page_ring net: ks8851: Check for error irq drivers: net: smc911x: Check for error irq fjes: Check for error irq bonding: fix ad_actor_system option setting to default igb: fix deadlock caused by taking RTNL in RPM resume path gve: Correct order of processing device options net: skip virtio_net_hdr_set_proto if protocol already set net: accept UFOv6 packages in virtio_net_hdr_to_skb docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx ...
2021-12-23net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5MNobuhiro Iwamatsu1-1/+1
ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a value, which is 0. Fix from BIT(0) to 0. Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23r8152: sync ocp baseHayes Wang1-4/+22
There are some chances that the actual base of hardware is different from the value recorded by driver, so we have to reset the variable of ocp_base to sync it. Set ocp_base to -1. Then, it would be updated and the new base would be set to the hardware next time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23r8152: fix the force speed doesn't work for RTL8156Hayes Wang1-0/+17
It needs to set mdio force mode. Otherwise, link off always occurs when setting force speed. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: stmmac: ptp: fix potentially overflowing expressionXiaoliang Yang1-1/+1
Convert the u32 variable to type u64 in a context where expression of type u64 is required to avoid potential overflow. Fixes: e9e3720002f6 ("net: stmmac: ptp: update tas basetime after ptp adjust") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23veth: ensure skb entering GRO are not cloned.Paolo Abeni1-2/+6
After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"), if GRO is enabled on a veth device and TSO is disabled on the peer device, TCP skbs will go through the NAPI callback. If there is no XDP program attached, the veth code does not perform any share check, and shared/cloned skbs could enter the GRO engine. Ignat reported a BUG triggered later-on due to the above condition: [ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574! [ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25 [ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0 [ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f 85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89 f7 4c 89 8c [ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246 [ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000 [ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2 [ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0 [ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590 [ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0 [ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000 [ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0 [ 53.982634][ C1] Call Trace: [ 53.982634][ C1] <TASK> [ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0 [ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460 [ 53.982634][ C1] tcp_ack+0x2666/0x54b0 [ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0 [ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810 [ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0 [ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0 [ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0 [ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440 [ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660 [ 53.982634][ C1] ip_list_rcv+0x2c8/0x410 [ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910 [ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0 [ 53.982634][ C1] napi_complete_done+0x188/0x6e0 [ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0 [ 53.982634][ C1] __napi_poll+0xa1/0x530 [ 53.982634][ C1] net_rx_action+0x567/0x1270 [ 53.982634][ C1] __do_softirq+0x28a/0x9ba [ 53.982634][ C1] run_ksoftirqd+0x32/0x60 [ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0 [ 53.982634][ C1] kthread+0x3b9/0x490 [ 53.982634][ C1] ret_from_fork+0x22/0x30 [ 53.982634][ C1] </TASK> Address the issue by skipping the GRO stage for shared or cloned skbs. To reduce the chance of OoO, try to unclone the skbs before giving up. v1 -> v2: - use avoid skb_copy and fallback to netif_receive_skb - Eric Reported-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23Merge tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextJakub Kicinski163-2634/+5358
Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 Third set of patches for v5.17, and the final one if all goes well. We have Specific Absorption Rate (SAR) support for both mt76 and rtw88. Also iwlwifi should be now W=1 warning free. But otherwise nothing really special this time, business as usual. Major changes: mt76 * Specific Absorption Rate (SAR) support * mt7921: new PCI ids * mt7921: 160 MHz channel support iwlwifi * fix W=1 and sparse warnings * BNJ hardware support * add new killer device ids * support for Time-Aware-SAR (TAS) from the BIOS * Optimized Connectivity Experience (OCE) scan support rtw88 * hardware scan * Specific Absorption Rate (SAR) support ath11k * qca6390/wcn6855: report signal and tx bitrate * qca6390: rfkill support * qca6390/wcn6855: regdb.bin support ath5k * switch to rate table based lookup wilc1000 * spi: reset/enable GPIO support * tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (148 commits) mt76: mt7921: fix a possible race enabling/disabling runtime-pm wilc1000: Document enable-gpios and reset-gpios properties wilc1000: Add reset/enable GPIO support to SPI driver wilc1000: Convert static "chipid" variable to device-local variable rtw89: 8852a: correct bit definition of dfs_en rtw88: don't consider deep PS mode when transmitting packet ath11k: Fix unexpected return buffer manager error for QCA6390 ath11k: add support of firmware logging for WCN6855 ath11k: Fix napi related hang ath10k: replace strlcpy with strscpy rtw88: support SAR via kernel common API rtw88: 8822c: add ieee80211_ops::hw_scan iwlwifi: mei: wait before mapping the shared area iwlwifi: mei: clear the ownership when the driver goes down iwlwifi: yoyo: fix issue with new DBGI_SRAM region read. iwlwifi: fw: fix some scan kernel-doc iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ iwlwifi: mvm: remove card state notification code iwlwifi: mvm: drop too short packets silently iwlwifi: mvm: fix AUX ROC removal ... ==================== Link: https://lore.kernel.org/r/20211223141108.78808C36AE9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: stmmac: add tc flower filter for EtherType matchingOng Boon Leong2-0/+124
This patch adds basic support for EtherType RX frame steering for LLDP and PTP using the hardware offload capabilities. Example steps for setting up RX frame steering for LLDP and PTP: $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 For LLDP $ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88cc \ flower hw_tc 5 OR $ tc filter add dev $IFDEVNAME parent ffff: protocol LLDP \ flower hw_tc 5 For PTP $ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88f7 \ flower hw_tc 6 Show tc ingress filter $ tc filter show dev $IFDEVNAME ingress v1->v2: Thanks to Kurt's and Sebastian's suggestion. - change from __be16 to u16 etype - change ETHER_TYPE_FULL_MASK to use cpu_to_be16() macro Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23net: lan966x: Add support for multiple bridge flagsHoratiu Vultur4-2/+82
This patch series extends the current supported bridge flags with the following flags: BR_FLOOD, BR_BCAST_FLOOD and BR_LEARNING. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-22net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'Christophe JAILLET1-5/+9
All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out' where 'flow_flag_set(flow, FAILED);' is called. All but the new error handling paths added by the commits given in the Fixes tag below. Fix these error handling paths and branch to 'err_out'. Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port") Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> (cherry picked from commit 31108d142f3632970f6f3e0224bd1c6781c9f87d)
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.