| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for interrupts for LAN8804 PHY.
Tested-by: Michael Walle <michael@walle.cc> # on kontron-kswitch-d10
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220913142926.816746-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a quirk for the HALNy HL-GSFP module, which appears to have an
inverted RX_LOS signal, and maybe uses TX_FAULT as a serial port
transmit pin. Rather than use these hardware signals, switch to
using software polling for these status signals.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move this module over to the new fixup mechanism.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new fixup mechanism to the SFP quirks, and use it for this
module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to handle more quirks than just those which affect the link
modes of the module. Move the quirk lookup into sfp.c, and pass the
quirk to sfp-bus.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Re-implement the decision making for soft state polling. Instead of
generating the soft state mask in sfp_soft_start_poll() by looking at
which GPIOs are available, record their availability in
sfp_sm_mod_probe() in sfp->state_hw_mask.
This will then allow us to clear bits in sfp->state_hw_mask in module
specific quirks when the hardware signals should not be used, thereby
allowing us to switch to using the software state polling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All field mask symbols are defined with a "_FMASK" suffix, but
EOT_COAL_GRANULARITY and DRBIP_ACL_ENABLE are defined without one.
Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with IPA v4.5, replication is done differently from before,
and as a result the "replication" portion of the how the sequencer
is specified must be zero.
Add a check for the configuration data failing that requirement, and
only update the sesquencer type value when it's supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ipa_endpoint_init_hdr(), as well as ipa_endpoint_init_hdr_ext(),
a top-level automatic variable named "offset" is used to represent
the offset of a register.
However, deeper within each of those functions is *another*
definition of a local variable with the same name, representing
something else. Scoping rules ensure the result is what was
intended, but this variable name reuse is bad practice and makes
the code confusing.
Fix this by naming the inner variable "off". Use "off" instead of
"checksum_offset" in ipa_endpoint_init_cfg() for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the definition of ipa_version_valid(), making it a static
inline function defined together with the enumerated type in
"ipa_version.h". Define a new count value in the type.
Rename the function to be ipa_version_supported(), and have it
return true only if the IPA version supplied is explicitly supported
by the driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the definition of the gsi_ee_id enumerated type out of "gsi.h"
and into "ipa_version.h". That latter header file isolates the
definition of the ipa_version enumerated type, allowing it to be
included in both IPA and GSI code. We have the same requirement for
gsi_ee_id, and moving it here makes it easier to get only that
definition without everything else defined in "gsi.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each GSI execution environment (EE) is able to access many of the
GSI registers associated with the other EEs. A block of GSI
registers is contained within a region of memory, and an EE's
register offset can be determined by adding the register's base
offset to the product of the EE ID and a fixed constant.
Despite this possibility, the AP IPA code *never* accesses any GSI
registers other than its own. So there's no need to define the
macros that compute register offsets for other EEs.
Redefine the AP access macros to compute the offset the way the more
general "any EE" macro would, and get rid of the unneeded macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In of_mdiobus_register(), we should call of_node_put() for 'child'
escaped out of for_each_available_child_of_node().
Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Co-developed-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY
designed for industrial Ethernet applications. It integrates
an Ethernet PHY core with a MAC and all the associated analog
circuitry, input and output clock buffering.
ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers
can be accessed through the MDIO MAC registers.
We are registering an MDIO bus with custom read/write in order
to let the PHY to be discovered by the PAL. This will let
the ADIN1100 Linux driver to probe and take control of
the PHY.
The ADIN2111 is a low power, low complexity, two-Ethernet ports
switch with integrated 10BASE-T1L PHYs and one serial peripheral
interface (SPI) port.
The device is designed for industrial Ethernet applications using
low power constrained nodes and is compliant with the IEEE 802.3cg-2019
Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE).
The switch supports various routing configurations between
the two Ethernet ports and the SPI host port providing a flexible
solution for line, daisy-chain, or ring network topologies.
The ADIN2111 supports cable reach of up to 1700 meters with ultra
low power consumption of 77 mW. The two PHY cores support the
1.0 V p-p operating mode and the 2.4 V p-p operating mode defined
in the IEEE 802.3cg standard.
The device integrates the switch, two Ethernet physical layer (PHY)
cores with a media access control (MAC) interface and all the
associated analog circuitry, and input and output clock buffering.
The device also includes internal buffer queues, the SPI and
subsystem registers, as well as the control logic to manage the reset
and clock control and hardware pin configuration.
Access to the PHYs is exposed via an internal MDIO bus. Writes/reads
can be performed by reading/writing to the ADIN2111 MDIO registers
via SPI.
On probe, for each port, a struct net_device is allocated and
registered. When both ports are added to the same bridge, the driver
will enable offloading of frame forwarding at the hardware level.
Driver offers STP support. Normal operation on forwarding state.
Allows only frames with the 802.1d DA to be passed to the host
when in any of the other states.
When both ports of ADIN2111 belong to the same SW bridge a maximum
of 12 FDB entries will offloaded by the hardware and are marked as such.
Co-developed-by: Lennart Franzen <lennart@lfdomain.com>
Signed-off-by: Lennart Franzen <lennart@lfdomain.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add additional PHY IDs for the internal PHYs of adin1110 and adin2111.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit b353b241f1eb9b6265358ffbe2632fdcb563354f, this is
creating multiple issues, just not ready to be merged yet.
Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/
Link: https://lore.kernel.org/all/20220907143915.5w65kainpykfobte@pengutronix.de/
Fixes: b353b241f1eb ("net: fec: Use a spinlock to guard `fep->ptp_clk_on`")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit f79959220fa5fbda939592bf91c7a9ea90419040, this is
creating multiple issues, just not ready to be merged yet.
Link: https://lore.kernel.org/all/20220905180542.GA3685102@roeck-us.net/
Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/
Fixes: f79959220fa5 ("fec: Restart PPS after link state change")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Maximum frame length check is enabled in lan937x switch on POR, But it
is found to be disabled on driver during port setup operation. Due to
this, packets are not dropped when transmitted with greater than configured
value. For testing, setup made for lan1->lan2 transmission and configured
lan1 interface with a frame length (less than 1500 as mentioned in
documentation) and transmitted packets with greater than configured value.
Expected no packets at lan2 end, but packets observed at lan2.
Based on the documentation, packets should get discarded if the actual
packet length doesn't match the frame length configured. Frame length check
should be disabled only for cascaded ports due to tailtags.
This feature was disabled on ksz9477 series due to ptp issue, which is
not in lan937x series. But since lan937x took ksz9477 as base, frame
length check disabled here as well. Patch added to remove this portion
from port setup so that maximum frame length check will be active for
normal ports.
Fixes: 55ab6ffaf378 ("net: dsa: microchip: add DSA support for microchip LAN937x")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Link: https://lore.kernel.org/r/20220912051228.1306074-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clang warns:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (err)
^~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:598:9: note: uninitialized use occurs here
return macsec_rule;
^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:2: note: remove the 'if' if its condition is always false
if (err)
^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:523:38: note: initialize the variable 'macsec_rule' to silence this warning
union mlx5e_macsec_rule *macsec_rule;
^
= NULL
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (err)
^~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1215:9: note: uninitialized use occurs here
return macsec_rule;
^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:2: note: remove the 'if' if its condition is always false
if (err)
^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1118:38: note: initialize the variable 'macsec_rule' to silence this warning
union mlx5e_macsec_rule *macsec_rule;
^
= NULL
2 errors generated.
If macsec_fs_{r,t}x_ft_get() fail, macsec_rule will be uninitialized.
Initialize it to NULL at the top of each function so that it cannot be
used uninitialized.
Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Fixes: 3b20949cb21b ("net/mlx5e: Add MACsec RX steering rules")
Link: https://github.com/ClangBuiltLinux/linux/issues/1706
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/20220911085748.461033-1-nathan@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Changing the DSA master means different things depending on the tagging
protocol in use.
For NPI mode ("ocelot" and "seville"), there is a single port which can
be configured as NPI, but DSA only permits changing the CPU port
affinity of user ports one by one. So changing a user port to a
different NPI port globally changes what the NPI port is, and breaks the
user ports still using the old one.
To address this while still permitting the change of the NPI port,
require that the user ports which are still affine to the old NPI port
are down, and cannot be brought up until they are all affine to the same
NPI port.
The tag_8021q mode ("ocelot-8021q") is more flexible, in that each user
port can be freely assigned to one CPU port or to the other. This works
by filtering host addresses towards both tag_8021q CPU ports, and then
restricting the forwarding from a certain user port only to one of the
two tag_8021q CPU ports.
Additionally, the 2 tag_8021q CPU ports can be placed in a LAG. This
works by enabling forwarding via PGID_SRC from a certain user port
towards the logical port ID containing both tag_8021q CPU ports, but
then restricting forwarding per packet, via the LAG hash codes in
PGID_AGGR, to either one or the other.
When we change the DSA master to a LAG device, DSA guarantees us that
the LAG has at least one lower interface as a physical DSA master.
But DSA masters can come and go as lowers of that LAG, and
ds->ops->port_change_master() will not get called, because the DSA
master is still the same (the LAG). So we need to hook into the
ds->ops->port_lag_{join,leave} calls on the CPU ports and update the
logical port ID of the LAG that user ports are assigned to.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Drivers could refuse to offload a LAG configuration for a variety of
reasons, mainly having to do with its TX type. Additionally, since DSA
masters may now also be LAG interfaces, and this will translate into a
call to port_lag_join on the CPU ports, there may be extra restrictions
there. Propagate the netlink extack to this DSA method in order for
drivers to give a meaningful error message back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a desire to support for DSA masters in a LAG.
That configuration is intended to work by simply enslaving the master to
a bonding/team device. But the physical DSA master (the LAG slave) still
has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical
CPU port.
However, we would like to be able to retrieve the LAG that's the upper
of the physical DSA master. In preparation for that, introduce a helper
called dsa_port_get_master() that replaces all occurrences of the
dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will
be made later within the helper itself.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for offloading packets based on L2TPv3 session id in switchdev
mode.
Example filter:
tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \
l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to be able to specify l2tpv3_sid.
ICE COMMS DDP package is required to create a filter as it contains L2TPv3
profiles.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
coccinelle reports a warning
WARNING: casting value returned by memory allocation
function to (struct octep_rx_buffer *) is useless.
To fix this the useless cast is removed.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/Yx+sr9o0uylXVcOl@playground
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: 9b8dd5e5ea48b ("gve: DQO: Add RX path")
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20220913000901.959546-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of t7xx_ccmni_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ipc_wwan_link_transmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214455.929028-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of korina_send_packet should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912214344.928925-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of liteeth_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/r/20220912195307.812229-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of emac_dev_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912195023.810319-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of dm9000_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220912194722.809525-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of ax88796c_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20220912194031.808425-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The warning message of unsupported FW appears every time RX timestamps
are disabled on the interface. The patch fixes the flags to correct set
for the check.
Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220915234932.25497-1-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kalle Valo says:
====================
wireless fixes for v6.0
Late stage fixes for v6.0. Temporarily mark iwlwifi's mei code broken
as it breaks suspend for iwd users and also don't spam nss trimming
messages. mt76 has fixes for aggregation sequence numbers and a
regression related to the VHT extended NSS BW feature.
* tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
wifi: mt76: fix reading current per-tid starting sequence number for aggregation
wifi: iwlwifi: Mark IWLMEI as broken
wifi: iwlwifi: don't spam logs with NSS>2 messages
====================
Link: https://lore.kernel.org/r/20220919105003.1EAE7C433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b43e ("sfc: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use kmemdup() helper instead of open-coding to
simplify the code when allocate dev_addr.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220914140100.3795545-2-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing error code when mlx5e_macsec_fs_add_rule() or
mlx5e_macsec_fs_init() fails. mlx5e_macsec_fs_init() don't
return ERR_PTR(), so replace IS_ERR_OR_NULL() check with
NULL pointer check.
Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220914140100.3795545-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Structure the code in such a way that it can be reused later for the
pMAC statistics, by just changing the "mac" argument to 1.
Usage:
ethtool --include-statistics --show-pause eno2
ethtool -S eno0 --groups eth-mac
ethtool -S eno0 --groups eth-ctrl
ethtool -S eno0 --groups rmon
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENETC has counters for the eMAC and for the pMAC exactly 0x1000
apart from each other. The driver only contains definitions for PM0,
the eMAC.
Rather than duplicating everything for PM1, modify the register
definitions such that they take the MAC as argument.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the Renesas Ethernet AVB (EtherAVB-IF) blocks on R-Car
Gen4 SoCs (e.g. R-Car V4H) by matching on a family-specific compatible
value.
These are treated the same as EtherAVB on R-Car Gen3.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/2ee968890feba777e627d781128b074b2c43cddb.1662718171.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support for Cable Diagnostics in lan8814 phy
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220909083123.30134-1-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update Kconfig to also check for ARCH_S32.
Add compatible string and quirks for fsl,s32v234
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable page_pool/XDP support for MT7621 SoC in order fix a regression
introduce adding XDP for MT7986 SoC. There is no a real use case for XDP
on MT7621 since it is a low-end cpu. Moreover this patch reduces the
memory footprint.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/2bf31e27b888c43228b0d84dd2ef5033338269e2.1663074002.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Per GDMA spec, rmb is necessary after checking owner_bits, before
reading EQ or CQ entries.
Add rmb in these two places to comply with the specs.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reported-by: Sinan Kaya <Sinan.Kaya@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1662928805-15861-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hwstats debugfs files are only writeable, but they are created with
read and write permissions, causing certain selftests to fail [1].
Fix by creating the files with write permission only.
[1]
# ./test_offload.py
Test destruction of generic XDP...
Traceback (most recent call last):
File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module>
simdev = NetdevSimDev()
[...]
Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex
cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument
Fixes: 1a6d7ae7d63c ("netdevsim: Introduce support for L3 offload xstats")
Reported-by: Jie2x Zhou <jie2x.zhou@intel.com>
Tested-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This node pointer is returned by of_find_compatible_node() with
refcount incremented in this function. of_node_put() on it before
exitting this function.
Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220908040226.871690-1-sunke32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Horatiu Vultur
Russell King (Oracle)
Alex Elder
Liang He
Alexandru Tachici
Francesco Dolcini
Rakesh Sankaranarayanan
Nathan Chancellor
Vladimir Oltean
Marcin Szycik
Jules Irenge
Shailend Chand
Nathan Huckleberry
Vadim Fedorenko
Jakub Kicinski
Íñigo Huguet
Yang Yingliang
Geert Uytterhoeven
Divya Koppera
Wei Fang
Lorenzo Bianconi
Haiyang Zhang
Ido Schimmel
Sun Ke
Michal Jaron