aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-10-13net: encx24j600: check error in devm_regmap_init_encx24j600Nanyong Sun3-5/+14
devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13Merge tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski4-16/+66
Saeed Mahameed says: ==================== mlx5 fixes 2021-10-12 * tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp net/mlx5e: Switchdev representors are not vlan challenged net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode net/mlx5: Fix cleanup of bridge delayed work ==================== Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: korina: select CRC32Vegard Nossum1-0/+1
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291bcd5f9 ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: remove single-byte netdev->dev_addr writesJakub Kicinski11-13/+21
Make the drivers which use single-byte netdev addresses (netdev->addr_len == 1) use the appropriate address setting helpers. arcnet copies from int variables and io reads a lot, so add a helper for arcnet drivers to use. Similar helper could be reused for phonet and appletalk but there isn't any good central location where we could put it, and netdevice.h is already very crowded. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for HSI Link: https://lore.kernel.org/r/20211012142757.4124842-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13hamradio: use dev_addr_set() for setting device addressJakub Kicinski8-16/+14
Use dev_addr_set() instead of writing to netdev->dev_addr directly in hamradio drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fix typo AVB->DMACBiju Das1-1/+1
Fix the typo AVB->DMAC in comment, as the code following the comment is for DMAC on Gigabit Ethernet IP. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Update ravb_emac_init_gbeth()Biju Das2-2/+9
This patch enables Receive/Transmit port of TOE and removes the setting of promiscuous bit from EMAC configuration mode register. This patch also update EMAC configuration mode comment from "PAUSE prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Document PFRI register bitBiju Das1-1/+1
Document PFRI register bit, as it is documented on R-Car Gen3 and RZ/G2L hardware manuals. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "nc_queue" feature bitBiju Das2-19/+19
Rename the feature bit "nc_queue" with "nc_queues" as AVB DMAC has RX and TX NC queues. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Optimize ravb_emac_init_gbeth functionBiju Das1-2/+1
Optimize CXR31 register initialization on ravb_emac_init_gbeth function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "tsrq" variableBiju Das2-5/+5
Rename the variable "tsrq" with "tccr_mask" as we are passing TCCR mask to the ravb_wait() function. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add support to retrieve stats for GbEthernetBiju Das1-0/+21
Add support for retrieving stats information for GbEthernet. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add carrier_counters to struct ravb_hw_infoBiju Das2-0/+11
RZ/G2L E-MAC supports carrier counters. Add a carrier_counter hw feature bit to struct ravb_hw_info to add this feature only for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_gbeth() stubBiju Das2-5/+142
Fillup ravb_rx_gbeth() function to support RZ/G2L. This patch also renames ravb_rcar_rx to ravb_rx_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_format_gbeth() stubBiju Das2-4/+31
Fillup ravb_rx_ring_format_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_format to ravb_rx_ring_format_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_free_gbeth() stubBiju Das1-4/+24
Fillup ravb_rx_ring_free_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_free to ravb_rx_ring_free_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_alloc_rx_desc_gbeth() stubBiju Das2-7/+24
Fillup ravb_alloc_rx_desc_gbeth() function to support RZ/G2L. This patch also renames ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add rx_max_buf_size to struct ravb_hw_infoBiju Das2-1/+5
R-Car AVB-DMAC has maximum 2K size on RX buffer, whereas on RZ/G2L it is 8K. We need to allow for changing the MTU within the limit of the maximum size of a descriptor. Add a rx_max_buf_size variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Use ALIGN macro for max_rx_lenBiju Das1-1/+1
Use ALIGN macro for calculating the value for max_rx_len. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: arc: select CRC32Vegard Nossum1-0/+1
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: qed_debug: fix check of false (grc_param < 0) expressionJean Sacren1-1/+1
The type of enum dbg_grc_params has the enumerator list starting from 0. When grc_param is declared by enum dbg_grc_params, (grc_param < 0) is always false. We should remove the check of this expression. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Acked-by: Shai Malin <smalin@marvell.com> Link: https://lore.kernel.org/r/20211012074645.12864-1-sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: enetc: include ip6_checksum.h for csum_ipv6_magicIoana Ciornei1-0/+1
For those architectures which do not define_HAVE_ARCH_IPV6_CSUM, we need to include ip6_checksum.h which provides the csum_ipv6_magic() function. Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20211012121358.16641-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13wireless: Remove redundant 'flush_workqueue()' callsChristophe JAILLET13-21/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
2021-10-13mt7601u: Remove redundant initialization of variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read, it is assigned later on with a different value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007234153.31222-1-colin.king@canonical.com
2021-10-13rtlwifi: rtl8192ee: Remove redundant initialization of variable versionColin Ian King1-1/+1
The variable version is being initialized with a value that is never read, it is being updated afterwards in both branches of an if statement. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007163722.20165-1-colin.king@canonical.com
2021-10-13rtw89: add Realtek 802.11ax driverPing-Ke Shih41-0/+91102
This driver named rtw89, which is the next generation of rtw88, supports Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC, Spatial reuse, TWT and BSS coloring; now some of them aren't implemented though. The chip architecture is entirely different from the chips supported by rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges are totally redefined, so it's impossible to reuse register definition. To communicate with firmware, new H2C/C2H format is proposed. In order to have better utilization, TX DMA flow is changed to two stages DMA. To provide rich RX status information, additional RX PPDU packets are added. Since there are so many differences mentioned above, we decide to propose a new driver. It has many authors, they are listed in alphabetic order: Chin-Yen Lee <timlee@realtek.com> Ping-Ke Shih <pkshih@realtek.com> Po Hao Huang <phhuang@realtek.com> Tzu-En Huang <tehuang@realtek.com> Vincent Fann <vincent_fann@realtek.com> Yan-Hsuan Chuang <tony0620emma@gmail.com> Zong-Zhe Yang <kevin_yang@realtek.com> Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211008035627.19463-1-pkshih@realtek.com
2021-10-13ath10k: fix max antenna gain unitSven Eckelmann2-3/+6
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org
2021-10-13ath9k: fix an IS_ERR() vs NULL checkDan Carpenter1-2/+2
The devm_kmemdup() function doesn't return error pointers, it returns NULL on error. Fixes: eb3a97a69be8 ("ath9k: fetch calibration data via nvmem subsystem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011123533.GA15188@kili
2021-10-13ath11k: Identify DFS channel when sending scan channel list commandBaochen Qiang1-0/+2
WMI_CHAN_INFO_DFS flag should be set when configuring a DFS channel included in scan channel list. Without it, firmware will not send a probe request frame which is needed in connection to an AP configured with hidden SSID/network_id. So fix this to allow probe request frames to be sent in cases where a beacon frame has been seen on the channel first. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011054919.77071-1-bqiang@codeaurora.org
2021-10-13ath9k: support DT ieee80211-freq-limit property to limit channelsChristian Lamparter1-0/+2
The common DT property can be used to limit the available channels but ath9k has to manually call wiphy_read_of_freq_limits(). I would have put this into ath9k_of_init(). But it didn't work there. The reason is that in ath9k_of_init() the channels and bands are not yet registered in the wiphy struct. So there isn't any channel to flag as disabled. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211009212847.1781986-1-chunkeey@gmail.com
2021-10-12ionic: no devlink_unregister if not registeredShannon Nelson1-1/+0
Don't try to unregister the devlink if it hasn't been registered yet. This bit of error cleanup code got missed in the recent devlink registration changes. Fixes: 7911c8bd546f ("ionic: Move devlink registration to be last devlink command") Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211012231520.72582-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: felix: break at first CPU port during init and teardownVladimir Oltean1-7/+12
The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: felix: purge skb from TX timestamping queue if it cannot be sentVladimir Oltean1-0/+28
At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch libVladimir Oltean2-4/+93
Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driverVladimir Oltean2-17/+1
As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP headerVladimir Oltean1-1/+23
The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: deny TX timestamping of non-PTP packetsVladimir Oltean1-7/+12
It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skbVladimir Oltean1-3/+3
When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: avoid overflowing the PTP timestamp FIFOVladimir Oltean2-8/+35
PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: mscc: ocelot: make use of all 63 PTP timestamp identifiersVladimir Oltean1-1/+3
At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driverVladimir Oltean1-2/+1
It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driverVladimir Oltean2-58/+6
The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12devlink: Delete reload enable/disable interfaceLeon Romanovsky7-23/+3
Commit a0c76345e3d3 ("devlink: disallow reload operation during device cleanup") added devlink_reload_{enable,disable}() APIs to prevent reload operation from racing with device probe/dismantle. After recent changes to move devlink_register() to the end of device probe and devlink_unregister() to the beginning of device dismantle, these races can no longer happen. Reload operations will be denied if the devlink instance is unregistered and devlink_unregister() will block until all in-flight operations are done. Therefore, remove these devlink_reload_{enable,disable}() APIs. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12net/mlx5: Set devlink reload feature bit for supported devices onlyLeon Romanovsky1-1/+4
Mulitport slave device doesn't support devlink reload, so instead of complicating initialization flow with devlink_reload_enable() which will be removed in next patch, don't set DEVLINK_F_RELOAD feature bit for such devices. This fixes an error when reload counters exposed (and equal zero) for the mode that is not supported at all. Fixes: d89ddaae1766 ("net/mlx5: Disable devlink reload for multi port slave device") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12devlink: Allow control devlink ops behavior through feature maskLeon Romanovsky6-0/+6
Introduce new devlink call to set feature mask to control devlink behavior during device initialization phase after devlink_alloc() is already called. This allows us to set reload ops based on device property which is not known at the beginning of driver initialization. For the sake of simplicity, this API lacks any type of locking and needs to be called before devlink_register() to make sure that no parallel access to the ops is possible at this stage. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12devlink: Reduce struct devlink exposureLeon Romanovsky1-1/+1
The declaration of struct devlink in general header provokes the situation where internal fields can be accidentally used by the driver authors. In order to reduce such possible situations, let's reduce the namespace exposure of struct devlink. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfp: use dev_driver_string() instead of pci_dev->driver->nameUwe Kleine-König1-1/+2
Replace dev->driver_name() by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <simon.horman@corigine.com>
2021-10-12mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->nameUwe Kleine-König1-1/+1
Replace dev->driver_name() by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
2021-10-12net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->nameUwe Kleine-König1-1/+1
Replace dev->driver_name() by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12net: hns3: use dev_driver_string() instead of pci_dev->driver->nameUwe Kleine-König1-1/+1
Replace dev->driver_name() by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.