aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/nvme/host (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-11-26nvme-rdma: wait for local invalidation before completing a requestSagi Grimberg1-15/+24
We must not complete a request before the host memory region is invalidated. Luckily we have send with invalidate protocol support so we usually don't need to execute it, but in case the target did not invalidate a memory region for us, we must wait for the invalidation to complete before unmapping host memory and completing the I/O. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: don't complete requests before a send work request has completedSagi Grimberg1-4/+24
In order to guarantee that the HCA will never get an access violation (either from invalidated rkey or from iommu) when retrying a send operation we must complete a request only when both send completion and the nvme cqe has arrived. We need to set the send/recv completions flags atomically because we might have more than a single context accessing the request concurrently (one is cq irq-poll context and the other is user-polling used in IOCB_HIPRI). Only then we are safe to invalidate the rkey (if needed), unmap the host buffers, and complete the IO. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-26nvme-rdma: don't suppress send completionsSagi Grimberg1-40/+14
The entire completions suppress mechanism is currently broken because the HCA might retry a send operation (due to dropped ack) after the nvme transaction has completed. In order to handle this, we signal all send completions and introduce a separate done handler for async events as they will be handled differently (as they don't include in-capsule data by definition). Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-24nvme-fc: don't use bit masks for set/test_bit() numbersJens Axboe1-2/+2
So far harmless, but it's confusing and a bug waiting to happen if the shifts grow larger than 4. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-23nvme-pci: add quirk for delay before CHK RDY for WDC SN200Jeff Lien2-1/+3
And increase the existing delay to cover this device as well. Cc: stable@vger.kernel.org Signed-off-by: Jeff Lien <jeff.lien@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme: Suppress static analyis warningKeith Busch1-5/+2
The ns->head is always valid, so we don't need to check for NULL. Reported-by: Dan Carpenter <dan.caprenter@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme: Fix NULL dereference on reservation requestKeith Busch1-6/+6
This fixes using the NULL 'head' before getting the reference. It is however possible the head will always be NULL, so this patch uses the struct nvme_ns to get the ns_id field. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme: fix spelling mistake: "requeing" -> "requeuing"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_warn_ratelimited message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme-pci: avoid hmb desc array idx out-of-bound when hmmaxd set.Minwoo Im1-1/+1
hmb descriptor idx out-of-bound occurs in case of below conditions. preferred = 128MiB chunk_size = 4MiB hmmaxd = 1 Current code will not allow rmmod which will free hmb descriptors to be done successfully in above case. "descs[i]" will be set in for-loop without seeing any conditions related to "max_entries" after a single "descs" was allocated by (max_entries = 1) in this case. Added a condition into for-loop to check index of descriptors. Fixes: 044a9df1("nvme-pci: implement the HMB entry number and size limitations") Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme-pci: disable APST on Samsung SSD 960 EVO + ASUS PRIME B350M-AKai-Heng Feng1-2/+10
The NVMe device in question drops off the PCIe bus after system suspend. I've tried several approaches to workaround this issue, but none of them works: - NVME_QUIRK_DELAY_BEFORE_CHK_RDY - NVME_QUIRK_NO_DEEPEST_PS - Disable APST before controller shutdown - Delay between controller shutdown and system suspend - Explicitly set power state to 0 before controller shutdown Fortunately it's a desktop, so disable APST won't hurt the battery. Also, change the quirk function name to reflect it's for vendor combination quirks. BugLink: https://bugs.launchpad.net/bugs/1705748 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme-fc: check if queue is ready in queue_rqSagi Grimberg1-1/+18
In case the queue is not LIVE (fully functional and connected at the nvmf level), we cannot allow any commands other than connect to pass through. Add a new queue state flag NVME_FC_Q_LIVE which is set after nvmf connect and cleared in queue teardown. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-20nvme-fabrics: introduce init command check for a queue that is not aliveSagi Grimberg2-26/+36
When the fabrics queue is not alive and fully functional, no commands should be allowed to pass but connect (which moves the queue to a fully functional state). Any other command should be failed, with either temporary status BLK_STS_RESOUCE or permanent status BLK_STS_IOERR. This is shared across all fabrics, hence move the check to fabrics library. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds11-788/+2381
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-11nvme: fix visibility of "uuid" ns attributeMartin Wilck1-1/+1
"uuid" must be invisible if both ns->uuid and ns->nguid are unset, not if either one is. Fixes: d934f9848a77 "nvme: provide UUID value to userspace" Signed-off-by: Martin Wilck <mwilck@suse.com> [hch: rebased to the nvme-4.15 tree to help resolving a conflict] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: expose subsys attribute to sysfsHannes Reinecke1-0/+48
We should be exposing the subsystem attributes like 'model' and 'subsysnqn' to sysfs to allow for easier identification of the subsystem. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: create 'slaves' and 'holders' entries for hidden controllersHannes Reinecke3-0/+40
When creating nvme multipath devices we should populate the 'slaves' and 'holders' directorys properly to aid userspace topology detection. Signed-off-by: Hannes Reinecke <hare@suse.com> [hch: split from a larger patch, compile fix for CONFIG_NVME_MULTIPATH=n] Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: also expose the namespace identification sysfs files for mpath nodesChristoph Hellwig3-26/+38
We do this by adding a helper that returns the ns_head for a device that can belong to either the per-controller or per-subsystem block device nodes, and otherwise reuse all the existing code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: implement multipath access to nvme subsystemsChristoph Hellwig5-14/+455
This patch adds native multipath support to the nvme driver. For each namespace we create only single block device node, which can be used to access that namespace through any of the controllers that refer to it. The gendisk for each controllers path to the name space still exists inside the kernel, but is hidden from userspace. The character device nodes are still available on a per-controller basis. A new link from the sysfs directory for the subsystem allows to find all controllers for a given subsystem. Currently we will always send I/O to the first available path, this will be changed once the NVMe Asynchronous Namespace Access (ANA) TP is ratified and implemented, at which point we will look at the ANA state for each namespace. Another possibility that was prototyped is to use the path that is closes to the submitting NUMA code, which will be mostly interesting for PCI, but might also be useful for RDMA or FC transports in the future. There is not plan to implement round robin or I/O service time path selectors, as those are not scalable with the performance rates provided by NVMe. The multipath device will go away once all paths to it disappear, any delay to keep it alive needs to be implemented at the controller level. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: track shared namespacesChristoph Hellwig3-50/+210
Introduce a new struct nvme_ns_head that holds information about an actual namespace, unlike struct nvme_ns, which only holds the per-controller namespace information. For private namespaces there is a 1:1 relation of the two, but for shared namespaces this lets us discover all the paths to it. For now only the identifiers are moved to the new structure, but most of the information in struct nvme_ns should eventually move over. To allow lockless path lookup the list of nvme_ns structures per nvme_ns_head is protected by SRCU, which requires freeing the nvme_ns structure through call_srcu. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: introduce a nvme_ns_ids structureChristoph Hellwig2-34/+49
This allows us to manage the various uniqueue namespace identifiers together instead needing various variables and arguments. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: track subsystemsChristoph Hellwig3-36/+205
This adds a new nvme_subsystem structure so that we can track multiple controllers that belong to a single subsystem. For now we only use it to store the NQN, and to check that we don't have duplicate NQNs unless the involved subsystems support multiple controllers. Includes code originally from Hannes Reinecke to expose the subsystems in sysfs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block, nvme: Introduce blk_mq_req_flags_tBart Van Assche2-4/+6
Several block layer and NVMe core functions accept a combination of BLK_MQ_REQ_* flags through the 'flags' argument but there is no verification at compile time whether the right type of block layer flags is passed. Make it possible for sparse to verify this. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: linux-nvme@lists.infradead.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-pci: avoid dereference of symbol from unloaded moduleMing Lei1-1/+2
The 'remove_work' may be scheduled to run after nvme_remove() returns since we can't simply cancel it in nvme_remove() for avoiding deadlock. Once nvme_remove() returns, this module(nvme) can be unloaded. On the other hand, nvme_put_ctrl() calls ctr->ops->free_ctrl which may point to nvme_pci_free_ctrl() in unloaded module. This patch avoids this issue by queuing 'remove_work' via 'nvme_wq', and flush this worqueue in nvme_exit() as suggested by Sagi. Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: send uevent for some asynchronous eventsKeith Busch2-0/+29
This will give udev a chance to observe and handle asynchronous event notifications and clear the log to unmask future events of the same type. The driver will create a change uevent of the asyncronuos event result before submitting the next AEN request to the device if a completed AEN event is of type error, smart, command set or vendor specific, Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: unexport starting async event workKeith Busch2-8/+1
Async event work is for core use only and should not be called directly from drivers. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: remove handling of multiple AEN requestsKeith Busch5-39/+10
The driver can handle tracking only one AEN request, so this patch removes handling for multiple ones. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: remove unused "queue_size" fieldKeith Busch1-6/+3
This was being saved in a structure, but never used anywhere. The queue size is obtained through other means, so there's no reason to duplicate this without a user for it. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: centralize AEN definesKeith Busch5-47/+19
All the transports were unnecessarilly duplicating the AEN request accounting. This patch defines everything in one place. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: fix eui_show() print formatJavier González1-1/+1
Fix print formatting, but keep the original output to prevent user breakage as suggested by Joe Perches. Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: compare NQN string with right sizeJavier González1-1/+1
Copy subnqns using NVMF_NQN_SIZE as it is < 256 Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-rdma: fix nvme_rdma_create_queue_ib error flowMax Gurtovoy1-1/+1
QP object is created using rdma_cm api, therefore the destruction should use the same api for symmetry. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: decouple ns references from lldd referencesJames Smart1-6/+78
In the lldd api, a lldd may unregister a remoteport (loss of connectivity or driver unload) or localport (driver unload). The lldd must wait for the remoteport_delete or localport_delete before completing its actions post the unregister. The xxx_deletes currently occur only when the xxxport structure is fully freed after all references are removed. Thus the lldd may be held hostage until an app or in-kernel entity that has a namespace open finally closes so the namespace can be removed, the controller removed, thus the transport objects, thus the lldd. This patch decouples the transport and os-facing objects from the lldd and the remoteport and localport. There is a point in all deletions where the transport will no longer interact with the lldd on behalf of a controller. That point centers around the association established with the target/subsystem. It will access the lldd whenever it attempts to create an association and while the association is active. New associations may only be created if the remoteport is live (thus the localport is live). It will not access the lldd after deleting the association. Therefore, the patch tracks the count of active controllers - those with associations being created or that are active - on a remoteport. It also tracks the number of remoteports that have active controllers, on a a localport. When a remoteport is unregistered, as soon as there are no active controllers, the lldd's remoteport_delete may be called and the lldd may continue. Similarly, when a localport is unregistered, as soon as there are no remoteports with active controllers, the localport_delete callback may be made. This significantly speeds up unregistration with the lldd. The transport objects continue in suspended status with reconnect timers running, and upon expiration, normal ref-counting will occur and the objects will be freed. The transport object may still be held hostage by the application/kernel module, but that is acceptable. With this change, the lldd may be fully unloaded and reloaded, and if registrations occur prior to the timeouts, the nvme controller and namespaces will resume normally as if a link bounce. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: fix localport resume using stale valuesJames Smart1-2/+10
The localport resume was not updating the lldd ops structure. If the lldd is unloaded and reloaded, the ops pointers will differ. Additionally, as there are device references taken by the localport, ensure that resume only resumes if the device matches as well. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: check admin passthru command effectsKeith Busch2-0/+108
The NVMe standard provides a command effects log page so the host may be aware of special requirements it may need to do for a particular command. For example, the command may need to run with IO quiesced to prevent timeouts or undefined behavior, or it may change the logical block formats that determine how the host needs to construct future commands. This patch saves the nvme command effects log page if the controller supports it, and performs appropriate actions before and after an admin passthrough command is completed. If the controller does not support the command effects log page, the driver will define the effects for known opcodes. The nvme format and santize are the only commands in this patch with known effects. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: factor get log into a helperKeith Busch1-6/+13
And fix the warning on a successful firmware log. Reviewed-by: Javier González <javier@cnexlabs.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: fix and clarify the check for missing metadataChristoph Hellwig1-13/+18
Update the check in nvme_setup_rw for missing metadata so that it is together with the other metadata handling, does not contain impossible to reach conditions and warns if we get an impossible requests for a (non-PI) metadata-enabled namespace when CONFIG_BLK_DEV_INTEGRITY is not set. Also add a little helper that checks if a given metadata configuration contains protection information Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Javier González <jg@lightnvm.io> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: split __nvme_revalidate_diskChristoph Hellwig1-23/+26
Split out the code that applies the calculate value to a given disk/queue into new helper that can be reused by the multipath code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: set the chunk size before freezing the queueChristoph Hellwig1-2/+3
We don't need a frozen queue to update the chunk_size, which just is a hint, and moving it a little earlier will allow for some better code reuse with the multipath code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: don't pass struct nvme_ns to nvme_config_discardChristoph Hellwig1-16/+17
To allow reusing this function for the multipath node. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: don't pass struct nvme_ns to nvme_init_integrityChristoph Hellwig1-7/+7
To allow reusing this function for the multipath node. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: always unregister the integrity profile in __nvme_revalidate_diskChristoph Hellwig1-30/+10
This is safe because the queue is always frozen when we revalidate, and it simplifies both the existing code as well as the multipath implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: move the dying queue check from cancel to completionChristoph Hellwig1-6/+3
With multipath we don't want a hard DNR bit on a request that is cancelled by a controller reset, but instead want to be able to retry it on another patch. To archive this don't always set the DNR bit when the queue is dying in nvme_cancel_request, but defer that decision to nvme_req_needs_retry. Note that it applies to any command there and not just cancelled commands, but one the queue is dying that is the right thing to do anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-4.15/blockJens Axboe7-448/+969
Pull NVMe changes from Christoph: "Below are the currently queue nvme updates for Linux 4.15. There are a few more things that could make it for this merge window, but I'd like to get things into linux-next, especially for the unlikely case that Linus decided to cut -rc8. Highlights: - support for SGLs in the PCIe driver (Chaitanya Kulkarni) - disable I/O schedulers for the admin queue (Israel Rukshin) - various Fibre Channel fixes and enhancements (James Smart) - various refactoring for better code sharing between transports (Sagi Grimberg and me) as well as lots of little bits from various contributors."
2017-11-03nvme: comment typo fixed in clearing AERMinwoo Im1-1/+1
a tiny typo fixed in a comment. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-0/+1
Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01nvme: Remove unused headersKeith Busch1-4/+0
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01nvme-fc: add dev_loss_tmo timeout and remoteport resume supportJames Smart1-39/+239
When a remoteport is unregistered (connectivity lost), the following actions are taken: - the remoteport is marked DELETED - the time when dev_loss_tmo would expire is set in the remoteport - all controllers on the remoteport are reset. After a controller resets, it will stall in a RECONNECTING state waiting for one of the following: - the controller will continue to attempt reconnect per max_retries and reconnect_delay. As no remoteport connectivity, the reconnect attempt will immediately fail. If max reconnects has not been reached, a new reconnect_delay timer will be schedule. If the current time plus another reconnect_delay exceeds when dev_loss_tmo expires on the remote port, then the reconnect_delay will be shortend to schedule no later than when dev_loss_tmo expires. If max reconnect attempts are reached (e.g. ctrl_loss_tmo reached) or dev_loss_tmo ix exceeded without connectivity, the controller is deleted. - the remoteport is re-registered prior to dev_loss_tmo expiring. The resume of the remoteport will immediately attempt to reconnect each of its suspended controllers. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> [hch: updated to use nvme_delete_ctrl] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01nvme: allow controller RESETTING to RECONNECTING transitionJames Smart1-0/+1
Transport will typically transition from LIVE to RESETTING when initially performing a reset or recovering from an error. Adding this transition allows a transport to transition to RECONNECTING when it checks/waits for connectivity then creates new transport connections and reinits the controller. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-11-01nvme-fc: check connectivity before initiating reconnectsJames Smart1-7/+16
Check remoteport connectivity before initiating reconnects Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.