aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/nvme (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-25Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds6-4/+300
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support
2019-11-25Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds18-214/+289
Pull block driver updates from Jens Axboe: "Here are the main block driver updates for 5.5. Nothing major in here, mostly just fixes. This contains: - a set of bcache changes via Coly - MD changes from Song - loop unmap write-zeroes fix (Darrick) - spelling fixes (Geert) - zoned additions cleanups to null_blk/dm (Ajay) - allow null_blk online submit queue changes (Bart) - NVMe changes via Keith, nothing major here either" * tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits) Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()" drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET bcache: don't export symbols bcache: remove the extra cflags for request.o bcache: at least try to shrink 1 node in bch_mca_scan() bcache: add idle_max_writeback_rate sysfs interface bcache: add code comments in bch_btree_leaf_dirty() bcache: fix deadlock in bcache_allocator bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add more accurate error messages in read_super() bcache: fix static checker warning in bcache_device_free() bcache: fix a lost wake-up problem caused by mca_cannibalize_lock bcache: fix fifo index swapping condition in journal_pin_cmp() md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load null_blk: add zone open, close, and finish support dm: add zone open, close and finish support ...
2019-11-22nvme: hwmon: add quirk to avoid changing temperature thresholdAkinobu Mita3-2/+12
This adds a new quirk NVME_QUIRK_NO_TEMP_THRESH_CHANGE to avoid changing the value of the temperature threshold feature for specific devices that show undesirable behavior. Guenter reported: "On my Intel NVME drive (SSDPEKKW512G7), writing any minimum limit on the Composite temperature sensor results in a temperature warning, and that warning is sticky until I reset the controller. It doesn't seem to matter which temperature I write; writing -273000 has the same result." The Intel NVMe has the latest firmware version installed, so this isn't a problem that was ever fixed. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-22nvme: hwmon: provide temperature min and max values for each sensorAkinobu Mita1-16/+90
According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-13nvme: Discard workaround for non-conformant devicesEduard Hasenleithner1-3/+9
Users observe IOMMU related errors when performing discard on nvme from non-compliant nvme devices reading beyond the end of the DMA mapped ranges to discard. Two different variants of this behavior have been observed: SM22XX controllers round up the read size to a multiple of 512 bytes, and Phison E12 unconditionally reads the maximum discard size allowed by the spec (256 segments or 4kB). Make nvme_setup_discard unconditionally allocate the maximum DSM buffer so the driver DMA maps a memory range that will always succeed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202665 many Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at> [changelog, use existing define, kernel coding style] Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-12nvme: Add hardware monitoring supportGuenter Roeck5-0/+206
nvme devices report temperature information in the controller information (for limits) and in the smart log. Currently, the only means to retrieve this information is the nvme command line interface, which requires super-user privileges. At the same time, it would be desirable to be able to use NVMe temperature information for thermal control. This patch adds support to read NVMe temperatures from the kernel using the hwmon API and adds temperature zones for NVMe drives. The thermal subsystem can use this information to set thermal policies, and userspace can access it using libsensors and/or the "sensors" command. Example output from the "sensors" command: nvme0-pci-0100 Adapter: PCI adapter Composite: +39.0°C (high = +85.0°C, crit = +85.0°C) Sensor 1: +39.0°C Sensor 2: +41.0°C Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-08Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-blockLinus Torvalds2-0/+10
Pull block fixes from Jens Axboe: - Two NVMe device removal crash fixes, and a compat fixup for for an ioctl that was introduced in this release (Anton, Charles, Max - via Keith) - Missing error path mutex unlock for drbd (Dan) - cgroup writeback fixup on dead memcg (Tejun) - blkcg online stats print fix (Tejun) * tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block: cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead block: drbd: remove a stray unlock in __drbd_send_protocol() blkcg: make blkcg_print_stat() print stats only for online blkgs nvme: change nvme_passthru_cmd64 to explicitly mark rsvd nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths nvme-rdma: fix a segmentation fault during module unload
2019-11-06nvme-multipath: fix crash in nvme_mpath_clear_ctrl_pathsAnton Eidelman1-0/+2
nvme_mpath_clear_ctrl_paths() iterates through the ctrl->namespaces list while holding ctrl->scan_lock. This does not seem to be the correct way of protecting from concurrent list modification. Specifically, nvme_scan_work() sorts ctrl->namespaces AFTER unlocking scan_lock. This may result in the following (rare) crash in ctrl disconnect during scan_work: BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core] ... Call Trace: nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core] nvme_remove_namespaces+0x35/0xe0 [nvme_core] nvme_do_delete_ctrl+0x47/0x90 [nvme_core] nvme_sysfs_delete+0x49/0x60 [nvme_core] dev_attr_store+0x17/0x30 sysfs_kf_write+0x3e/0x50 kernfs_fop_write+0x11e/0x1a0 __vfs_write+0x1b/0x40 vfs_write+0xb9/0x1a0 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8d02bfb154 Fix: After taking scan_lock in nvme_mpath_clear_ctrl_paths() down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe. This will not cause deadlocks because taking scan_lock never happens while holding the namespaces_rwsem. Moreover, scan work downs namespaces_rwsem in the same order. Alternative: sort ctrl->namespaces in nvme_scan_work() while still holding the scan_lock. This would leave nvme_mpath_clear_ctrl_paths() without correct protection against ctrl->namespaces modification by anyone other than scan_work. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-06nvme-rdma: fix a segmentation fault during module unloadMax Gurtovoy1-0/+8
In case there are controllers that are not associated with any RDMA device (e.g. during unsuccessful reconnection) and the user will unload the module, these controllers will not be freed and will access already freed memory. The same logic appears in other fabric drivers as well. Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-04nvme: Fix parsing of ANA log pagePrabhath Sajeepa1-4/+8
Check validity of offset into ANA log buffer before accessing nvme_ana_group_desc. This check ensures the size of ANA log buffer >= offset + sizeof(nvme_ana_group_desc) Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: stop using bio_set_op_attrsChristoph Hellwig1-7/+6
bio_set_op_attrs has been long deprecated, replace it with a direct assignment of the flags to bio->bi_opf. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: add plugging for read/write when ns is bdevChristoph Hellwig1-0/+3
With reference to the following issue reported on the mailing list :- http://lists.infradead.org/pipermail/linux-nvme/2019-October/027604.html this patch adds plugging for the bdev-ns under nvmet_bdev_execute_rw(). We can see the following performance improvement in random write workload I/Os with the setup described in the link when device_path configured as /dev/md0. Without this patch :-   write: IOPS=40.8k, BW=159MiB/s (167MB/s)(4777MiB/30002msec)   write: IOPS=41.2k, BW=161MiB/s (169MB/s)(4831MiB/30011msec)     slat (usec): min=8,  max=10823, avg=15.64,  stdev=16.85     slat (usec): min=8,  max=401,   avg=15.40,  stdev= 9.56     clat (usec): min=54, max=2492,  avg=759.07, stdev=172.62     clat (usec): min=56, max=1997,  avg=768.06, stdev=178.72 With this patch :-   write: IOPS=123k, BW=480MiB/s (504MB/s)(14.1GiB/30011msec)   write: IOPS=123k, BW=481MiB/s (504MB/s)(14.1GiB/30002msec)     slat (usec): min=8,  max=9941,  avg=13.31,  stdev= 8.04     slat (usec): min=8,  max=289,   avg=13.31,  stdev= 3.37     clat (usec): min=43, max=17635, avg=245.46, stdev=171.23     clat (usec): min=44, max=17751, avg=245.25, stdev=183.14 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: clean up command parsing a bitChristoph Hellwig2-5/+6
Move the special cases for fabrics commands and the discovery controller to nvmet_parse_admin_cmd in preparation for adding passthrough support. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme-pci: Spelling s/resdicovered/rediscovered/Geert Uytterhoeven1-1/+1
Fix misspelling of "rediscovered". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: fill discovery controller sn, fr and mn correctlySagi Grimberg1-1/+7
Discovery controllers need this information as well. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Open code nvmet_req_execute()Christoph Hellwig6-15/+8
Now that nvmet_req_execute does nothing, open code it. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, update changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Remove the data_len field from the nvmet_req structChristoph Hellwig7-39/+86
Instead of storing the expected length and checking it when it's executed, just check the length inside the command themselves. A new helper, nvmet_check_data_len() is created to help with this check. Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, udpate changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Introduce nvmet_dsm_len() helperChristoph Hellwig2-2/+7
Similar to the nvmet_rw_len helper. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, update changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Cleanup discovery execute handlersChristoph Hellwig1-25/+19
Push the lid and cns check into their respective handlers and, while we're at it, rename the functions to be consistent with other discovery handlers. Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, update changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: Introduce common execute function for get_log_page and identifyChristoph Hellwig1-43/+50
Instead of picking the sub-command handler to execute in a nested switch statement introduce a landing functions that calls out to the appropriate sub-command handler. This will allow us to have a common place in the handler to check the transfer length in a future patch. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [split patch, update change log] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet-tcp: Don't set the request's data_lenLogan Gunthorpe1-4/+2
It's not apprporiate for the transports to set the data_len field of the request which is only used by the core. In this case, just use a variable on the stack to store the length of the sgl for comparison. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet-tcp: Don't check data_len in nvmet_tcp_map_data()Logan Gunthorpe1-1/+1
None of the other transports check data_len which is verified in core code. The function should instead check that the sgl length is non-zero. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme: Introduce nvme_lba_to_sect()Damien Le Moal2-7/+15
Introduce the new helper function nvme_lba_to_sect() to convert a device logical block number to a 512B sector number. Use this new helper in obvious places, cleaning up the code. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme: Cleanup and rename nvme_block_nr()Damien Le Moal2-5/+8
Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT instead of its hard coded value 9. Also add a comment to decribe this helper. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme: move common call to nvme_cleanup_cmd to core layerMax Gurtovoy5-11/+8
nvme_cleanup_cmd should be called for each call to nvme_setup_cmd (symmetrical functions). Move the call for nvme_cleanup_cmd to the common core layer and call it during nvme_complete_rq for the good flow. For error flow, each transport will call nvme_cleanup_cmd independently. Also take care of a special case of path failure, where we call nvme_complete_rq without doing nvme_setup_cmd. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme: introduce "Command Aborted By host" status codeMax Gurtovoy2-1/+2
Fix the status code of canceled requests initiated by the host according to TP4028 (Status Code 0x371): "Command Aborted By host: The command was aborted as a result of host action (e.g., the host disconnected the Fabric connection)." Also in a multipath environment, unless otherwise specified, errors of this type (path related) should be retried using a different path, if one is available. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet-rdma: add unlikely check at nvmet_rdma_map_sgl_keyedIsrael Rukshin1-2/+2
The calls to nvmet_req_alloc_sgl and rdma_rw_ctx_init should usually succeed, so add this simple optimization to the fast path. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: add unlikely check at nvmet_req_alloc_sglIsrael Rukshin1-1/+1
The call to sgl_alloc shouldn't fail so add this simple optimization to the fast path. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvmet: use bio_io_error instead of duplicating itIsrael Rukshin1-5/+3
This commit doesn't change any logic. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme: introduce nvme_is_aen_req functionIsrael Rukshin5-8/+12
This function improves code readability and reduces code duplication. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme-fc: ensure association_id is cleared regardless of a Disconnect LSJames Smart1-3/+3
Code today only clears the association_id if a Disconnect LS is transmit. Remove ambiguity and unconditionally clear the association_id if the association has been terminated. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme-fc: clarify error messagesJames Smart1-5/+6
Change wording on a couple of messages to clarify what happened. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme-fc: Set new cmd set indicator in nvme-fc cmnd iuJames Smart1-0/+5
Set the new category field in the FC-NVME CMND_IU based on queue number. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04nvme-fc and nvmet-fc: sync with FC-NVME-2 header changesJames Smart2-25/+26
Sync sources with revised structure and field names to correspond with FC-NVME-2 header sync-up. Tested interoperability with success: - prior initiator with new target - prior target with new initiator - new on new Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Fix free/alloc races in batmanadv, from Sven Eckelmann. 2) Several leaks and other fixes in kTLS support of mlx5 driver, from Tariq Toukan. 3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke Høiland-Jørgensen. 4) Add an r8152 device ID, from Kazutoshi Noguchi. 5) Missing include in ipv6's addrconf.c, from Ben Dooks. 6) Use siphash in flow dissector, from Eric Dumazet. Attackers can easily infer the 32-bit secret otherwise etc. 7) Several netdevice nesting depth fixes from Taehee Yoo. 8) Fix several KCSAN reported errors, from Eric Dumazet. For example, when doing lockless skb_queue_empty() checks, and accessing sk_napi_id/sk_incoming_cpu lockless as well. 9) Fix jumbo packet handling in RXRPC, from David Howells. 10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet. 11) Fix DMA synchronization in gve driver, from Yangchun Fu. 12) Several bpf offload fixes, from Jakub Kicinski. 13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo. 14) Fix ping latency during high traffic rates in hisilicon driver, from Jiangfent Xiao. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) net: fix installing orphaned programs net: cls_bpf: fix NULL deref on offload filter removal selftests: bpf: Skip write only files in debugfs selftests: net: reuseport_dualstack: fix uninitalized parameter r8169: fix wrong PHY ID issue with RTL8168dp net: dsa: bcm_sf2: Fix IMP setup for port different than 8 net: phylink: Fix phylink_dbg() macro gve: Fixes DMA synchronization. inet: stop leaking jiffies on the wire ixgbe: Remove duplicate clear_bit() call Documentation: networking: device drivers: Remove stray asterisks e1000: fix memory leaks i40e: Fix receive buffer starvation for AF_XDP igb: Fix constant media auto sense switching when no cable is connected net: ethernet: arc: add the missed clk_disable_unprepare igb: Enable media autosense for the i350. igb/igc: Don't warn on fatal read failures when the device is removed tcp: increase tcp_max_syn_backlog max value net: increase SOMAXCONN to 4096 netdevsim: Fix use-after-free during device dismantle ...
2019-10-29nvme-multipath: remove unused groups_only mode in ana logAnton Eidelman1-5/+4
groups_only mode in nvme_read_ana_log() is no longer used: remove it. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-29nvme-multipath: fix possible io hang after ctrl reconnectAnton Eidelman1-1/+1
The following scenario results in an IO hang: 1) ctrl completes a request with NVME_SC_ANA_TRANSITION. NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered. 2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl. This fails because ctrl disconnects. Therefore nvme_update_ns_ana_state() is not called and NVME_NS_ANA_PENDING bit in ns->flags is not cleared. 3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls nvme_read_ana_log(ctrl, groups_only=true). However, nvme_update_ana_state() does not update namespaces because nr_nsids = 0 (due to groups_only mode). 4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK. Result: The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set. Consequently ctrl will never be considered a viable path by __nvme_find_path(). IO will hang if ctrl is the only or the last path to the namespace. More generally, while ctrl is reconnecting, its ANA state may change. And because nvme_mpath_init() requests ANA log in groups_only mode, these changes are not propagated to the existing ctrl namespaces. This may result in a mal-function or an IO hang. Solution: nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false. This will not harm the new ctrl case (no namespaces present), and will make sure the ANA state of namespaces gets updated after reconnect. Note: Another option would be for nvme_mpath_init() to invoke nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-28net: use skb_queue_empty_lockless() in busy poll contextsEric Dumazet1-1/+1
Busy polling usually runs without locks. Let's use skb_queue_empty_lockless() instead of skb_queue_empty() Also uses READ_ONCE() in __skb_try_recv_datagram() to address a similar potential problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18nvme-pci: Set the prp2 correctly when using more than 4k pageKevin Hao1-1/+2
In the current code, the nvme is using a fixed 4k PRP entry size, but if the kernel use a page size which is more than 4k, we should consider the situation that the bv_offset may be larger than the dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then cause the command can't be executed correctly. Fixes: dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-15nvme-tcp: fix possible leakage during error flowMax Gurtovoy1-0/+1
During nvme_tcp_setup_cmd_pdu error flow, one must call nvme_cleanup_cmd since it's symmetric to nvme_setup_cmd. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-15nvmet-loop: fix possible leakage during error flowMax Gurtovoy1-1/+3
During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since it's symmetric to nvme_setup_cmd. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLLSebastian Andrzej Siewior1-0/+2
The access to sk->sk_ll_usec should be hidden behind CONFIG_NET_RX_BUSY_POLL like the definition of sk_ll_usec. Put access to ->sk_ll_usec behind CONFIG_NET_RX_BUSY_POLL. Fixes: 1a9460cef5711 ("nvme-tcp: support simple polling") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme: Wait for reset state when requiredKeith Busch3-17/+74
Prevent simultaneous controller disabling/enabling tasks from interfering with each other through a function to wait until the task successfully transitioned the controller to the RESETTING state. This ensures disabling the controller will not be interrupted by another reset path, otherwise a concurrent reset may leave the controller in the wrong state. Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme: Prevent resets during paused controller stateKeith Busch1-4/+25
A paused controller is doing critical internal activation work in the background. Prevent subsequent controller resets from occurring during this period by setting the controller state to RESETTING first. A helper function, nvme_try_sched_reset_work(), is introduced for these paths so they may continue with scheduling the reset_work after they've completed their uninterruptible critical section. Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme: Restart request timers in resetting stateKeith Busch2-0/+16
A controller in the resetting state has not yet completed its recovery actions. The pci and fc transports were already handling this, so update the remaining transports to not attempt additional recovery in this state. Instead, just restart the request timer. Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme: Remove ADMIN_ONLY stateKeith Busch4-37/+11
The admin only state was intended to fence off actions that don't apply to a non-IO capable controller. The only actual user of this is the scan_work, and pci was the only transport to ever set this state. The consequence of having this state is placing an additional burden on every other action that applies to both live and admin only controllers. Remove the admin only state and place the admin only burden on the only place that actually cares: scan_work. This also prepares to make it easier to temporarily pause a LIVE state so that we don't need to remember which state the controller had been in prior to the pause. Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-14nvme-pci: Free tagset if no IO queuesKeith Busch1-2/+9
If a controller becomes degraded after a reset, we will not be able to perform any IO. We currently teardown previously created request queues and namespaces, but we had kept the unusable tagset. Free it after all queues using it have been released. Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-10-04nvme: retain split access workaround for capability readsArd Biesheuvel1-1/+1
Commit 7fd8930f26be4 "nvme: add a common helper to read Identify Controller data" has re-introduced an issue that we have attempted to work around in the past, in commit a310acd7a7ea ("NVMe: use split lo_hi_{read,write}q"). The problem is that some PCIe NVMe controllers do not implement 64-bit outbound accesses correctly, which is why the commit above switched to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in the code. In the mean time, the NVMe subsystem has been refactored, and now calls into the PCIe support layer for NVMe via a .reg_read64() method, which fails to use lo_hi_readq(), and thus reintroduces the problem that the workaround above aimed to address. Given that, at the moment, .reg_read64() is only used to read the capability register [which is known to tolerate split reads], let's switch .reg_read64() to lo_hi_readq() as well. This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys DesignWare PCIe host controller. Fixes: 7fd8930f26be4 ("nvme: add a common helper to read Identify Controller data") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-10-04nvme: fix possible deadlock when nvme_update_formats failsSagi Grimberg1-2/+1
nvme_update_formats may fail to revalidate the namespace and attempt to remove the namespace. This may lead to a deadlock as nvme_ns_remove will attempt to acquire the subsystem lock which is already acquired by the passthru command with effects. Move the invalid namepsace removal to after the passthru command releases the subsystem lock. Reported-by: Judy Brock <judy.brock@samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-09-27Merge branch 'nvme-5.4' of git://git.infradead.org/nvme into for-linusJens Axboe7-51/+154
Pull NVMe changes from Sagi: "This set consists of various fixes and cleanups: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John" * 'nvme-5.4' of git://git.infradead.org/nvme: nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work nvme-pci: Fix a race in controller removal nvmet: change ppl to lpp
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.