aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/nvme (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29nvme-fabrics: Add type of service (TOS) configurationIsrael Rukshin2-0/+21
TOS is user-defined and needs to be configured via nvme-cli. It must be set before initiating any traffic and once set the TOS cannot be changed. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet-tcp: fix possible memory leakSagi Grimberg1-0/+1
when we uninit a command in error flow we also need to free an iovec if it was allocated. Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet-tcp: fix possible NULL derefSagi Grimberg1-4/+8
We must only call sgl_free for sgl that we actually allocated. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet: trace: parse Get LBA Status command in detailMinwoo Im1-0/+18
Four different fields are in CDWs of Get LBA Status command which means it would be great if we can see in detail when tracing in target side also. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: trace: parse Get LBA Status command in detailMinwoo Im1-0/+18
Four different fields are in CDWs of Get LBA Status command which means it would be great if we can see in detail when tracing. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet: fix data units read and written counters in SMART logTom Wu1-6/+8
In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2): This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up. However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires. Signed-off-by: Tom Wu <tomwu@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: support simple pollingSagi Grimberg1-6/+45
Simple polling support via socket busy_poll interface. Although we do not shutdown interrupts but simply hammer the socket poll, we can sometimes find completions faster than the normal interrupt driven RX path. We add per queue nr_cqe counter that resets every time RX path is invoked such that .poll callback can return it to stay consistent with the semantics. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: tcp: selects CRYPTO_CRC32C for nvme-tcpMinwoo Im1-0/+1
The tcp host module is now taking those APIs from crypto ahash: (1) crypto_ahash_final() (2) crypto_ahash_digest() (3) crypto_alloc_ahash() nvme-tcp should depends on CRYPTO_CRC32C. Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: don't pass cap to nvme_disable_ctrlSagi Grimberg5-7/+7
All seem to call it with ctrl->cap so no need to pass it at all. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: move sqsize setting to the coreSagi Grimberg7-55/+17
nvme_enable_ctrl reads the cap register right after, so no need to do that locally in the transport driver. Have sqsize setting in nvme_init_identify. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: set ctrl sqsize to the device q_depthSagi Grimberg1-0/+1
Align with what the rest of the transports are doing. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: have nvme_init_identify set ctrl->capSagi Grimberg1-4/+3
No need to use a stack cap variable. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: Use protocol specific operations while reading socketPotnuri Bharat Teja1-2/+3
Using socket specific read_sock() calls instead of directly calling tcp_read_sock() helps lld module registered handlers if any, to be called from nvme-tcp host. This patch therefore replaces the tcp_read_sock() with socket specific prot_ops. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: cleanup nvme_tcp_recv_pduSagi Grimberg1-8/+3
Can return directly in the switch statement Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-20nvme: Add quirk for LiteON CL1 devices running FW 22301111Mario Limonciello3-1/+17
One of the components in LiteON CL1 device has limitations that can be encountered based upon boundary race conditions using the nvme bus specific suspend to idle flow. When this situation occurs the drive doesn't resume properly from suspend-to-idle. LiteON has confirmed this problem and fixed in the next firmware version. As this firmware is already in the field, avoid running nvme specific suspend to idle flow. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Charles Hyde <charles.hyde@dellteam.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme: Fix cntlid validation when not using NVMEoFGuilherme G. Piccoli1-1/+3
Commit 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") introduced a validation for controllers with duplicate cntlid that runs on nvme_init_subsystem(). The problem is that the validation relies on ctrl->cntlid, and this value is assigned (from id_ctrl value) after the call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics scenario. That leads to ctrl->cntlid always being 0 in case we have a physical set of controllers in the same subsystem. This patch fixes that by loading the discovered cntlid id_ctrl value into ctrl->cntlid before the subsystem initialization, only for the non-fabrics case. The patch was tested with emulated nvme devices (qemu) having two controllers in a single subsystem. Without the patch, we couldn't make it work failing in the duplicate check; when running with the patch, we could see the subsystem holding both controllers. For the fabrics case we see ctrl->cntlid has a more intricate relation with the admin connect, so we didn't change that. Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nvme-multipath: fix possible I/O hang when paths are updatedAnton Eidelman1-0/+1
nvme_state_set_live() making a path available triggers requeue_work in order to resubmit requests that ended up on requeue_list when no paths were available. This requeue_work may race with concurrent nvme_ns_head_make_request() that do not observe the live path yet. Such concurrent requests may by made by either: - New IO submission. - Requeue_work triggered by nvme_failover_req() or another ana_work. A race may cause requeue_work capture the state of requeue_list before more requests get onto the list. These requests will stay on the list forever unless requeue_work is triggered again. In order to prevent such race, nvme_state_set_live() should synchronize_srcu(&head->srcu) before triggering the requeue_work and prevent nvme_ns_head_make_request referencing an old snapshot of the path list. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-17Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-blockLinus Torvalds9-15/+143
Pull block fixes from Jens Axboe: "A collection of fixes that should go into this series. This contains: - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There were still corner cases there, and even though I had a solution for it, it's too involved for this stage. (me) - Set of NVMe fixes (via Sagi) - io_uring fix for fixed buffers (Anthony) - io_uring defer issue fix (Jackie) - Regression fix for queue sync at exit time (zhengbin) - xen blk-back memory leak fix (Wenwen)" * tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block: io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list block: remove REQ_NOWAIT_INLINE io_uring: fix manual setup of iov_iter for fixed buffers xen/blkback: fix memory leaks blk-mq: move cancel of requeue_work to the front of blk_exit_queue nvme-pci: Fix async probe remove race nvme: fix controller removal race with scan work nvme-rdma: fix possible use-after-free in connect error flow nvme: fix a possible deadlock when passthru commands sent to a multipath device nvme-core: Fix extra device_put() call on error path nvmet-file: fix nvmet_file_flush() always returning an error nvmet-loop: Flush nvme_delete_wq when removing the port nvmet: Fix use-after-free bug when a port is removed nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
2019-08-16PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()Logan Gunthorpe1-2/+4
Add pci_p2pdma_unmap_sg() to the two places that call pci_p2pdma_map_sg(). This is a prep patch to introduce correct mappings for p2pdma transactions that go through the root complex. Link: https://lore.kernel.org/r/20190730163545.4915-10-logang@deltatee.com Link: https://lore.kernel.org/r/20190812173048.9186-10-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-16PCI/P2PDMA: Add attrs argument to pci_p2pdma_map_sg()Logan Gunthorpe1-2/+2
This is to match the dma_map_sg() API which this function will have to call in an future patch. Add a pci_p2pdma_map_sg_attrs() function and helper to call it with no attributes just like the dma_map_sg() function. Link: https://lore.kernel.org/r/20190730163545.4915-9-logang@deltatee.com Link: https://lore.kernel.org/r/20190812173048.9186-9-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-12nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabledRafael J. Wysocki1-3/+10
One of the modifications made by commit d916b1be94b6 ("nvme-pci: use host managed power state for suspend") was adding a pci_save_state() call to nvme_suspend() so as to instruct the PCI bus type to leave devices handled by the nvme driver in D0 during suspend-to-idle. That was done with the assumption that ASPM would transition the device's PCIe link into a low-power state when the device became inactive. However, if ASPM is disabled for the device, its PCIe link will stay in L0 and in that case commit d916b1be94b6 is likely to cause the energy used by the system while suspended to increase. Namely, if the device in question works in accordance with the PCIe specification, putting it into D3hot causes its PCIe link to go to L1 or L2/L3 Ready, which is lower-power than L0. Since the energy used by the system while suspended depends on the state of its PCIe link (as a general rule, the lower-power the state of the link, the less energy the system will use), putting the device into D3hot during suspend-to-idle should be more energy-efficient that leaving it in D0 with disabled ASPM. For this reason, avoid leaving NVMe devices with disabled ASPM in D0 during suspend-to-idle. Instead, shut them down entirely and let the PCI bus type put them into D3. Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2019-08-06lightnvm: move metadata mapping to lower level driverHans Holmberg1-3/+17
Now that blk_rq_map_kern can map both kmem and vmem, move internal metadata mapping down to the lower level driver. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hans Holmberg <hans@owltronix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-06lightnvm: remove nvm_submit_io_sync_fnHans Holmberg1-29/+0
Move the redundant sync handling interface and wait for a completion in the lightnvm core instead. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hans Holmberg <hans@owltronix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04blk-mq: remove blk_mq_complete_request_syncMing Lei1-1/+1
blk_mq_tagset_wait_completed_request() has been applied for waiting for completed request's fn, so not necessary to use blk_mq_complete_request_sync() any more. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04nvme: wait until all completed request's complete fn is calledMing Lei5-4/+18
When aborting in-flight request for recovering controller, we have to make sure that queue's complete function is called on completed request before moving on. Otherwise, for example, the warning of WARN_ON_ONCE(qp->mrs_used > 0) in ib_destroy_qp_user() may be triggered on nvme-rdma. Fix this issue by using blk_mq_tagset_wait_completed_request. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04nvme: don't abort completed request in nvme_cancel_requestMing Lei1-0/+4
Before aborting in-flight requests, all IO queues and their interrupts have been shutdown. However, request's completion function may not be done yet because it can be scheduled to run via IPI. So don't abort one request if it is marked as completed, otherwise we may abort one normal completed request. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31nvme-pci: Fix async probe remove raceKeith Busch1-1/+2
Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by: Li Zhong <lizhongfs@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme: fix controller removal race with scan workSagi Grimberg3-8/+54
With multipath enabled, nvme_scan_work() can read from the device (through nvme_mpath_add_disk()) and hang [1]. However, with fabrics, once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang (see nvmf_check_ready()) and the mpath stack device make_request will block if head->list is not empty. However, when the head->list consistst of only DELETING/DEAD controllers, we should actually not block, but rather fail immediately. In addition, before we go ahead and remove the namespaces, make sure to clear the current path and kick the requeue list so that the request will fast fail upon requeuing. [1]: -- INFO: task kworker/u4:3:166 blocked for more than 120 seconds. Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u4:3 D 0 166 2 0x80004000 Workqueue: nvme-wq nvme_scan_work Call Trace: __schedule+0x851/0x1400 schedule+0x99/0x210 io_schedule+0x21/0x70 do_read_cache_page+0xa57/0x1330 read_cache_page+0x4a/0x70 read_dev_sector+0xbf/0x380 amiga_partition+0xc4/0x1230 check_partition+0x30f/0x630 rescan_partitions+0x19a/0x980 __blkdev_get+0x85a/0x12f0 blkdev_get+0x2a5/0x790 __device_add_disk+0xe25/0x1250 device_add_disk+0x13/0x20 nvme_mpath_set_live+0x172/0x2b0 nvme_update_ns_ana_state+0x130/0x180 nvme_set_ns_ana_state+0x9a/0xb0 nvme_parse_ana_log+0x1c3/0x4a0 nvme_mpath_add_disk+0x157/0x290 nvme_validate_ns+0x1017/0x1bd0 nvme_scan_work+0x44d/0x6a0 process_one_work+0x7d7/0x1240 worker_thread+0x8e/0xff0 kthread+0x2c3/0x3b0 ret_from_fork+0x35/0x40 INFO: task kworker/u4:1:1034 blocked for more than 120 seconds. Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u4:1 D 0 1034 2 0x80004000 Workqueue: nvme-delete-wq nvme_delete_ctrl_work Call Trace: __schedule+0x851/0x1400 schedule+0x99/0x210 schedule_timeout+0x390/0x830 wait_for_completion+0x1a7/0x310 __flush_work+0x241/0x5d0 flush_work+0x10/0x20 nvme_remove_namespaces+0x85/0x3d0 nvme_do_delete_ctrl+0xb4/0x1e0 nvme_delete_ctrl_work+0x15/0x20 process_one_work+0x7d7/0x1240 worker_thread+0x8e/0xff0 kthread+0x2c3/0x3b0 ret_from_fork+0x35/0x40 -- Reported-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme-rdma: fix possible use-after-free in connect error flowSagi Grimberg1-5/+11
When start_queue fails, we need to make sure to drain the queue cq before freeing the rdma resources because we might still race with the completion path. Have start_queue() error path safely stop the queue. -- [30371.808111] nvme nvme1: Failed reconnect attempt 11 [30371.808113] nvme nvme1: Reconnecting in 10 seconds... [...] [30382.069315] nvme nvme1: creating 4 I/O queues. [30382.257058] nvme nvme1: Connect Invalid SQE Parameter, qid 4 [30382.257061] nvme nvme1: failed to connect queue: 4 ret=386 [30382.305001] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [30382.305022] IP: qedr_poll_cq+0x8a3/0x1170 [qedr] [30382.305028] PGD 0 P4D 0 [30382.305037] Oops: 0000 [#1] SMP PTI [...] [30382.305153] Call Trace: [30382.305166] ? __switch_to_asm+0x34/0x70 [30382.305187] __ib_process_cq+0x56/0xd0 [ib_core] [30382.305201] ib_poll_handler+0x26/0x70 [ib_core] [30382.305213] irq_poll_softirq+0x88/0x110 [30382.305223] ? sort_range+0x20/0x20 [30382.305232] __do_softirq+0xde/0x2c6 [30382.305241] ? sort_range+0x20/0x20 [30382.305249] run_ksoftirqd+0x1c/0x60 [30382.305258] smpboot_thread_fn+0xef/0x160 [30382.305265] kthread+0x113/0x130 [30382.305273] ? kthread_create_worker_on_cpu+0x50/0x50 [30382.305281] ret_from_fork+0x35/0x40 -- Reported-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme: fix a possible deadlock when passthru commands sent to a multipath deviceSagi Grimberg3-0/+47
When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Tested-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvme-core: Fix extra device_put() call on error pathLogan Gunthorpe1-1/+1
In the error path for nvme_init_subsystem(), nvme_put_subsystem() will call device_put(), but it will get called again after the mutex_unlock(). The device_put() only needs to be called if device_add() fails. This bug caused a KASAN use-after-free error when adding and removing subsytems in a loop: BUG: KASAN: use-after-free in device_del+0x8d9/0x9a0 Read of size 8 at addr ffff8883cdaf7120 by task multipathd/329 CPU: 0 PID: 329 Comm: multipathd Not tainted 5.2.0-rc6-vmlocalyes-00019-g70a2b39005fd-dirty #314 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x7b/0xb5 print_address_description+0x6f/0x280 ? device_del+0x8d9/0x9a0 __kasan_report+0x148/0x199 ? device_del+0x8d9/0x9a0 ? class_release+0x100/0x130 ? device_del+0x8d9/0x9a0 kasan_report+0x12/0x20 __asan_report_load8_noabort+0x14/0x20 device_del+0x8d9/0x9a0 ? device_platform_notify+0x70/0x70 nvme_destroy_subsystem+0xf9/0x150 nvme_free_ctrl+0x280/0x3a0 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 nvme_free_ns+0xc4/0x100 nvme_release+0xb3/0xe0 __blkdev_put+0x549/0x6e0 ? kasan_check_write+0x14/0x20 ? bd_set_size+0xb0/0xb0 ? kasan_check_write+0x14/0x20 ? mutex_lock+0x8f/0xe0 ? __mutex_lock_slowpath+0x20/0x20 ? locks_remove_file+0x239/0x370 blkdev_put+0x72/0x2c0 blkdev_close+0x8d/0xd0 __fput+0x256/0x770 ? _raw_read_lock_irq+0x40/0x40 ____fput+0xe/0x10 task_work_run+0x10c/0x180 ? filp_close+0xf7/0x140 exit_to_usermode_loop+0x151/0x170 do_syscall_64+0x240/0x2e0 ? prepare_exit_to_usermode+0xd5/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5a79af05d7 Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f c3 66 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 c4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 06 fc ff ff 8b 44 24 RSP: 002b:00007f5a7799c810 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007f5a79af05d7 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000008 RBP: 00007f5a58000f98 R08: 0000000000000002 R09: 00007f5a7935ee80 R10: 0000000000000000 R11: 0000000000000293 R12: 000055e432447240 R13: 0000000000000000 R14: 0000000000000001 R15: 000055e4324a9cf0 Allocated by task 1236: save_stack+0x21/0x80 __kasan_kmalloc.constprop.6+0xab/0xe0 kasan_kmalloc+0x9/0x10 kmem_cache_alloc_trace+0x102/0x210 nvme_init_identify+0x13c3/0x3820 nvme_loop_configure_admin_queue+0x4fa/0x5e0 nvme_loop_create_ctrl+0x469/0xf40 nvmf_dev_write+0x19a3/0x21ab __vfs_write+0x66/0x120 vfs_write+0x154/0x490 ksys_write+0x104/0x240 __x64_sys_write+0x73/0xb0 do_syscall_64+0xa5/0x2e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 329: save_stack+0x21/0x80 __kasan_slab_free+0x129/0x190 kasan_slab_free+0xe/0x10 kfree+0xa7/0x200 nvme_release_subsystem+0x49/0x60 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 klist_class_dev_put+0x31/0x40 klist_put+0x8f/0xf0 klist_del+0xe/0x10 device_del+0x3a7/0x9a0 nvme_destroy_subsystem+0xf9/0x150 nvme_free_ctrl+0x280/0x3a0 device_release+0x72/0x1d0 kobject_put+0x144/0x410 put_device+0x13/0x20 nvme_free_ns+0xc4/0x100 nvme_release+0xb3/0xe0 __blkdev_put+0x549/0x6e0 blkdev_put+0x72/0x2c0 blkdev_close+0x8d/0xd0 __fput+0x256/0x770 ____fput+0xe/0x10 task_work_run+0x10c/0x180 exit_to_usermode_loop+0x151/0x170 do_syscall_64+0x240/0x2e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 32fd90c40768 ("nvme: change locking for the per-subsystem controller list") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet-file: fix nvmet_file_flush() always returning an errorLogan Gunthorpe1-0/+3
Presently, nvmet_file_flush() always returns a call to errno_to_nvme_status() but that helper doesn't take into account the case when errno=0. So nvmet_file_flush() always returns an error code. All other callers of errno_to_nvme_status() check for success before calling it. To fix this, ensure errno_to_nvme_status() returns success if the errno is zero. This should prevent future mistakes like this from happening. Fixes: c6aa3542e010 ("nvmet: add error log support for file backend") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet-loop: Flush nvme_delete_wq when removing the portLogan Gunthorpe1-0/+8
After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete. This means a race can occur if a port is removed but there are still active controllers trying to access that memory. To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31nvmet: Fix use-after-free bug when a port is removedLogan Gunthorpe3-0/+16
When a port is removed through configfs, any connected controllers are still active and can still send commands. This causes a use-after-free bug which is detected by KASAN for any admin command that dereferences req->port (like in nvmet_execute_identify_ctrl). To fix this, disconnect all active controllers when a subsystem is removed from a port. This ensures there are no active controllers when the port is eventually removed. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-30nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_nsAnthony Iliopoulos1-0/+1
When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by: Anthony Iliopoulos <ailiopoulos@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23Revert "nvme-pci: don't create a read hctx mapping without read queues"yangerkun1-3/+1
This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix multipath crash when ANA is deactivatedMarta Rybczynska2-7/+7
Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix memory leak caused by incorrect subsystem freeLogan Gunthorpe1-7/+5
When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: ignore subnqn for ADATA SX6000LNPMisha Nasledov1-0/+2
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-15Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-blockLinus Torvalds13-48/+228
Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ...
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-11Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-8/+10
Pull SCSI scatter-gather list updates from James Bottomley: "This topic branch covers a fundamental change in how our sg lists are allocated to make mq more efficient by reducing the size of the preallocated sg list. This necessitates a large number of driver changes because the previous guarantee that if a driver specified SG_ALL as the size of its scatter list, it would get a non-chained list and didn't need to bother with scatterlist iterators is now broken and every driver *must* use scatterlist iterators. This was broken out as a separate topic because we need to convert all the drivers before pulling the trigger and unconverted drivers kept being found, necessitating a rebase" * tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation scsi: core: avoid preallocating big SGL for data scsi: core: avoid preallocating big SGL for protection information scsi: lib/sg_pool.c: improve APIs for allocating sg pool scsi: esp: use sg helper to iterate over scatterlist scsi: NCR5380: use sg helper to iterate over scatterlist scsi: wd33c93: use sg helper to iterate over scatterlist scsi: ppa: use sg helper to iterate over scatterlist scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist scsi: imm: use sg helper to iterate over scatterlist scsi: aha152x: use sg helper to iterate over scatterlist scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist scsi: usb: image: microtek: use sg helper to iterate over scatterlist scsi: pmcraid: use sg helper to iterate over scatterlist scsi: ipr: use sg helper to iterate over scatterlist scsi: mvumi: use sg helper to iterate over scatterlist scsi: lpfc: use sg helper to iterate over scatterlist scsi: advansys: use sg helper to iterate over scatterlist ...
2019-07-11nvme: fix NULL deref for fabrics optionsMinwoo Im1-1/+1
git://git.infradead.org/nvme.git nvme-5.3 branch now causes the following NULL deref oops. Check the ctrl->opts first before the deref. [ 16.337581] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 16.338551] #PF: supervisor read access in kernel mode [ 16.338551] #PF: error_code(0x0000) - not-present page [ 16.338551] PGD 0 P4D 0 [ 16.338551] Oops: 0000 [#1] SMP PTI [ 16.338551] CPU: 2 PID: 1035 Comm: kworker/u16:5 Not tainted 5.2.0-rc6+ #1 [ 16.338551] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 16.338551] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core] [ 16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf [ 16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283 [ 16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007 [ 16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720 [ 16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840 [ 16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8 [ 16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001 [ 16.338551] FS: 0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000 [ 16.338551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0 [ 16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.338551] Call Trace: [ 16.338551] nvme_scan_work+0x2c0/0x340 [nvme_core] [ 16.338551] ? __switch_to_asm+0x40/0x70 [ 16.338551] ? _raw_spin_unlock_irqrestore+0x18/0x30 [ 16.338551] ? try_to_wake_up+0x408/0x450 [ 16.338551] process_one_work+0x20b/0x3e0 [ 16.338551] worker_thread+0x1f9/0x3d0 [ 16.338551] ? cancel_delayed_work+0xa0/0xa0 [ 16.338551] kthread+0x117/0x120 [ 16.338551] ? kthread_stop+0xf0/0xf0 [ 16.338551] ret_from_fork+0x3a/0x50 [ 16.338551] Modules linked in: nvme nvme_core [ 16.338551] CR2: 0000000000000056 [ 16.338551] ---[ end trace b9bf761a93e62d84 ]--- [ 16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core] [ 16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf [ 16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283 [ 16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007 [ 16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720 [ 16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840 [ 16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8 [ 16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001 [ 16.338551] FS: 0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000 [ 16.338551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0 [ 16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 958f2a0f8121 ("nvme-tcp: set the STABLE_WRITES flag when data digests are enabled") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nvme: fix regression upon hot device removal and insertionSagi Grimberg1-2/+2
When we validate the new controller id, we want to skip controllers that are either deleting or dead. Fix the check to do that and not on the newly added controller. Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") Reported-by: Jon Derrick <jonathan.derrick@intel.com> Tested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvme-fc: fix module unloads while lports still pendingJames Smart1-3/+48
Current code allows the module to be unloaded even if there are pending data structures, such as localports and controllers on the localports, that have yet to hit their reference counting to remove them. Fix by having exit entrypoint explicitly delete every controller, which in turn will remove references on the remoteports and localports causing them to be deleted as well. The exit entrypoint, after initiating the deletes, will wait for the last localport to be deleted before continuing. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvme-tcp: don't use sendpage for SLAB pagesMikhail Skorzhinskii1-1/+8
According to commit a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects") and previous discussion, tcp_sendpage should not be used for pages that is managed by SLAB, as SLAB is not taking page reference counters into consideration. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvme-tcp: set the STABLE_WRITES flag when data digests are enabledMikhail Skorzhinskii1-0/+5
There was a few false alarms sighted on target side about wrong data digest while performing high throughput load to XFS filesystem shared through NVMoF TCP. This flag tells the rest of the kernel to ensure that the data buffer does not change while the write is in flight. It incurs a performance penalty, so only enable it when it is actually needed, i.e. when we are calculating data digests. Although even with this change in place, ext2 users can steel experience false positives, as ext2 is not respecting this flag. This may be apply to vfat as well. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Signed-off-by: Mike Playle <mplayle@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvmet: print a hint while rejecting NSID 0 or 0xffffffffMikhail Skorzhinskii1-1/+3
Adding this hint for the sake of convenience. It was spotted that a few times people spent some time before understanding what is exactly wrong in configuration process. This should save a few time in such situations, especially for people who is not very confident with NVMe requirements. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvme-multipath: do not select namespaces which are about to be removedHannes Reinecke1-1/+2
nvme_ns_remove() will first set the NVME_NS_REMOVING flag before removing it from the list at the very last step. So to avoid selecting a namespace in nvme_find_path() which is about to be removed check the NVME_NS_REMOVING flag, too, when selecting a new path. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09nvme-multipath: also check for a disabled path if there is a single siblingHannes Reinecke1-1/+4
When we have a singular list in nvme_round_robin_path() we still need to check its validity. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.