aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2017-04-20nvme-fc: fix status code handling in nvme_fc_fcpio_doneChristoph Hellwig1-8/+8
nvme_complete_async_event expects the little endian status code including the phase bit, and a new completion handler I plan to introduce will do so as well. Change the status variable into the little endian format with the phase bit used in the NVMe CQE to fix / enable this. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19lightnvm: Use blk_init_request_from_bio() instead of open-coding itBart Van Assche1-5/+1
This patch changes the behavior of the lightnvm driver as follows: * REQ_FAILFAST_MASK is set for read-ahead requests. * If no I/O priority has been set in the bio, the I/O priority is copied from the I/O context. * The rq_disk member is initialized if bio->bi_bdev != NULL. * The bio sector offset is copied into req->__sector instead of retaining the value -1 set by blk_mq_alloc_request(). * req->errors is initialized to zero. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matias Bjørling <m@bjorling.me> Cc: Adam Manzanares <adam.manzanares@wdc.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-18nvme/pci: Switch to pci_request_irq()Christoph Hellwig1-17/+13
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-04-16lightnvm: bad type conversion for nvme control bitsJavier González1-1/+1
The NVMe I/O command control bits are 16 bytes, but is interpreted as 32 bytes in the lightnvm user I/O data path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: enable nvme size compile assertsMatias Bjørling1-2/+4
The asserts in _nvme_nvm_check_size are not compiled due to the function not begin called. Make sure that it is called, and also fix the wrong sizes of asserts for nvme_nvm_addr_format, and nvme_nvm_bb_tbl, which checked for number of bits instead of bytes. Reported-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16lightnvm: submit erases using the I/O pathJavier González1-22/+10
Until now erases have been submitted as synchronous commands through a dedicated erase function. In order to enable targets implementing asynchronous erases, refactor the erase path so that it uses the normal async I/O submission functions. If a target requires sync I/O, it can implement it internally. Also, adapt rrpc to use the new erase path. Signed-off-by: Javier González <javier@cnexlabs.com> Fixed spelling error. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identifyScott Bauer1-1/+1
There are two closely named structs in lightnvm: struct nvme_nvm_addr_format and struct nvme_addr_format. The first struct has 4 reserved bytes at the end, the second does not. (gdb) p sizeof(struct nvme_nvm_addr_format) $1 = 16 (gdb) p sizeof(struct nvm_addr_format) $2 = 12 In the nvme_nvm_identify function we memcpy from the larger struct to the smaller struct. We incorrectly pass the length of the larger struct and overflow by 4 bytes, lets not do that. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-09nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capabilitySagi Grimberg1-1/+1
both our sqsize and the controller MQES cap are a 0 based value, so making it 1 based is wrong. Reported-by: Trapp, Darren <Darren.Trapp@cavium.com> Reported-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-09nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capabilitySagi Grimberg1-1/+1
both our sqsize and the controller MQES cap are a 0 based value, so making it 1 based is wrong. Reported-by: Trapp, Darren <Darren.Trapp@cavium.com> Reported-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-09nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capabilitySagi Grimberg1-1/+1
both our sqsize and the controller MQES cap are a 0 based value, so making it 1 based is wrong. Reported-by: Trapp, Darren <Darren.Trapp@cavium.com> Reported-by: Daniel Verkamp <daniel.verkamp@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08nvme: implement REQ_OP_WRITE_ZEROESChristoph Hellwig3-11/+11
But now for the real NVMe Write Zeroes yet, just to get rid of the discard abuse for zeroing. Also rename the quirk flag to be a bit more self-explanatory. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08block: add a flags argument to (__)blkdev_issue_zerooutChristoph Hellwig1-1/+1
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with similar semantics, but without referring to diѕcard. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07Merge branch 'for-linus' into for-4.12/blockJens Axboe3-4/+4
We've added a considerable amount of fixes for stalls and issues with the blk-mq scheduling in the 4.11 series since forking off the for-4.12/block branch. We need to do improvements on top of that for 4.12, so pull in the previous fixes to make our lives easier going forward. Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05nvme: move the retries count to struct nvme_requestChristoph Hellwig2-5/+6
The way NVMe uses this field is entirely different from the older SCSI/BLOCK_PC usage, so move it into struct nvme_request. Also reduce the size of the file to a unsigned char so that we leave space for additional smaller fields that will appear soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05nvme: mark nvme_max_retries staticChristoph Hellwig2-4/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05nvme: cleanup nvme_req_needs_retryChristoph Hellwig1-5/+11
Don't pass the status explicitly but derive it from the requeust, and unwind the complex condition to be more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05nvme: move ->retries setup to nvme_setup_cmdChristoph Hellwig2-4/+5
->retries is counting the number of times a command is resubmitted, and be cleared on the first time we see the command. We currently don't do that for non-PCIe command, which is easily fixed by moving the setup to common code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme: factor request completion code into a common helperChristoph Hellwig6-93/+40
This avoids duplicating the logic four times, and it also allows to keep some helpers static in core.c or just opencode them. Note that this loses printing the aborted status on completions in the PCI driver as that uses a data structure not available any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-fc: drop ctrl for all command completionsChristoph Hellwig1-2/+3
A requeue means we go through nvme_fc_start_fcp_op again and get another controller reference. To make sure the refcount doesn't leak we also need to drop it for every completion that came from the LLDD. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-fc: increment request retries counter before requeuingSagi Grimberg1-0/+1
This way our max retry limit holds as well. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: increment request retries counter before requeuingSagi Grimberg1-0/+1
This way our max retry limit holds as well. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: increment request retries counter before requeuingSagi Grimberg1-0/+1
This way our max retry limit holds as well. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme_fc: Clean up host fcpio done status handlingJames Smart1-7/+7
As Dan Carpenter pointed out: mixing 16-bit nvme status with 32-bit error status from driver. Corrected comment on fcp request struct status field, and converted done routine to explicitly set nvme status codes for nvme status. Signed-off-by: James Smart <james.smart@broadcom.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet_fc: Clear SG list to avoid double freesJames Smart1-0/+2
Clear SG list to avoid double frees of payload page list Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme_fc: correct LS validationJames Smart1-4/+5
LS validations shouldn't have been independent checks. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet_fc: Sync NVME LS reject reasons with specJames Smart1-7/+12
nvmet_fc: Sync NVME LS reject reasons with spec Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme_fc: Add check of status_code in ERSP_IUJames Smart1-0/+1
Add check of status_code in ERSP_IU Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: Support ctrl_loss_tmoSagi Grimberg1-13/+28
Before scheduling a reconnect attempt, check nr_reconnects against max_reconnects, if not exhausted (or max_reconnects is not -1), schedule a reconnect attempts, otherwise schedule ctrl removal. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-fabrics: Allow ctrl loss timeout configurationSagi Grimberg2-0/+38
When a host sense that its controller session is damaged, it tries to re-establish it periodically (reconnect every reconnect_delay). It may very well be that the controller is gone and never coming back, in this case the host will try to reconnect forever. Add a ctrl_loss_tmo to bound the number of reconnect attempts to a specific controller (default to a reasonable 10 minutes). The timeout configuration is actually translated into number of reconnect attempts and not a schedule on its own but rather divided with reconnect_delay. This is useful to prevent racing flows of remove and reconnect, and it doesn't really matter if we remove slightly sooner than what the user requested. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: get rid of local reconnect_delaySagi Grimberg1-5/+3
we already have it in opts. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: retrieve iod from the cqe command_idSagi Grimberg1-6/+25
useful to validate that the we didn't mess up the command_id. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: remove unneeded includesSagi Grimberg1-2/+0
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-fc: fix module_init (theoretical) error pathSagi Grimberg1-1/+10
If nvmf_register_transport happened to fail (it can't, but theoretically) we leak memory. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: fix module_init (theoretical) error pathSagi Grimberg1-1/+6
if nvmf_register_transport happend to fail, we need to nvmet_unregister_transport as well. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: fix module_init (theoretical) error pathSagi Grimberg1-5/+13
If nvmf_register_transport happened to fail (it can't, but theoretically) we leak memory. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet: use symbolic constants for log identifiersMax Gurtovoy1-6/+6
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet: Introduced helper routine for controller status check.Parav Pandit6-34/+41
This patch introduces helper function for checking controller status during admin and io command processing which returns u16 status. As to bring consistency on returning status, other friend functions also now return u16 status instead of int to match the spec. As part of the theseerror log prints in also prints qid on which command error occured. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet: Fixed avoided printing nvmet: twice in error logs.Parav Pandit4-21/+20
This patch avoids printing "nvmet:" twice in error logs as its already coming through pr_fmt macro. Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: use inet_pton_with_scope helperSagi Grimberg1-44/+19
Both the destination and the host addresses are now parsed using inet_pton_with_scope helper. We also get ipv6 (with address scopes support). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet-rdma: use generic inet_pton_with_scopeSagi Grimberg1-13/+29
Instead of parsing address strings, use a generic helper. This also adds ipv6 (with address scopes) support. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: remove some code duplicationSagi Grimberg1-12/+21
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: Give some more grace for rdma connection establishmentSagi Grimberg1-1/+1
The target might be occupied with multiple hosts so lets give it some more grace before failing the connection establishment. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet-rdma: occasionally flush ongoing controller teardownSagi Grimberg1-0/+5
If we are attacked with establishments/teradowns we need to make sure we do not consume too much system memory. Thus let ongoing controller teardowns complete before accepting new controller establishments. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-rdma: handle cpu unplug when re-establishing the controllerSagi Grimberg1-14/+14
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet-rdma: Fix a possible uninitialized variable dereferenceSagi Grimberg1-5/+3
When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it. Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables. Reported-by: Yi Zhang <yizhan@redhat.com> Reported-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvmet: confirm sq percpu has scheduled and switched to atomicSagi Grimberg2-1/+11
percpu_ref_kill is not enough to prevent subsequent percpu_ref_tryget_live from failing. Hence call perfcpu_ref_kill_confirm to make it safe. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme-loop: handle cpu unplug when re-establishing the controllerSagi Grimberg1-38/+50
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-04nvme-loop: fix a possible use-after-free when destroying the admin queueSagi Grimberg1-1/+1
we need to destroy the nvmet sq and let it finish gracefully before continue to cleanup the queue. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-02nvmet: fix byte swap in nvmet_parse_io_cmdChristoph Hellwig1-1/+1
We need to do arithmetics after byte swapping, not before. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-02nvmet: fix byte swap in nvmet_execute_write_zeroesChristoph Hellwig1-1/+1
The length field in the Write Zeroes command is a 16-bit field. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.