aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/of (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-02-14of: move definition of of_chosen into common code.Grant Likely1-0/+1
Rather than defining of_chosen in each arch, it can be defined for all in driver/of/base.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14of/flattree: Don't assume HAVE_LMBJeremy Kerr1-3/+6
We don't always have lmb available, so make arches provide an early_init_dt_alloc_memory_arch() to handle the allocation of memory in the fdt code. When we don't have lmb.h included, we need asm/page.h for __va. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of/flattree: Make the kernel accept ePAPR style phandle informationDavid Gibson1-1/+10
Currently when processing flattened device trees, the kernel expects the phandle in a property called "linux,phandle". The ePAPR spec - not being Linux specific - instead requires phandles to be encoded in a property named simply "phandle". This patch makes the kernel accept either form when unflattening the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: endian-convert members of boot_param_headerJeremy Kerr1-8/+8
The boot_param_header has big-endian fields, so change the types to __be32, and perform endian conversion when we access them. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: assume big-endian properties, adding conversions where necessaryJeremy Kerr6-41/+47
Properties in the device tree are specified as big-endian. At present, the only platforms to support device trees are also big-endian, so we've been acessing the properties as raw values. We'd like to add device tree support to little-endian platforms too, so add endian conversion to the sites where we access property values in the common of code. Compiled on powerpc (ppc44x_defconfig & ppc64_defconfig) and arm (fdt support only for now). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: use __be32 for cell value accessorsJeremy Kerr1-2/+2
Currently, we're using u32 for cell values, and hence assuming host-endian device trees. As we'd like to support little-endian platforms, use a __be32 for cell values, and convert in the cell accessors. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsingJeremy Kerr1-2/+2
At present we're using hard-coded values for defaults when parsing the FDT. This change uses the #defines instead. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: use callback to setup initrd from /chosenJeremy Kerr1-16/+11
At present, the fdt code sets the kernel-wide initrd_start and initrd_end variables when parsing /chosen. On ARM, we only set these once the bootmem has been reserved. This change adds an arch hook to setup the initrd from the device tree: void early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end); The arch-specific code can then setup the initrd however it likes. Compiled on powerpc, with CONFIG_BLK_DEV_INITRD=y and =n. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: include linux/proc_fs.hJeremy Kerr1-0/+1
We use a few procfs-specific functions (eg, proc_device_tree_*) which aren't covered by the current includes. This causes the following build error on arm: drivers/of/base.c: In function 'prom_add_property': drivers/of/base.c:861: error: implicit declaration of function 'proc_device_tree_add_prop' drivers/of/base.c: In function 'prom_remove_property': drivers/of/base.c:902: error: implicit declaration of function 'proc_device_tree_remove_prop' drivers/of/base.c: In function 'prom_update_property': drivers/of/base.c:946: error: implicit declaration of function 'proc_device_tree_update_prop' Add proc_fs.h for these prototypes. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of/flattree: merge early_init_dt_scan_memory() common codeGrant Likely1-0/+50
Merge common code between PowerPC and Microblaze architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of: add 'of_' prefix to machine_is_compatible()Grant Likely1-3/+3
machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09of: merge of_find_node_by_phandleJeremy Kerr1-0/+21
Merge common function between powerpc, sparc and microblaze. Code is identical for powerpc and microblaze, but adds a lock (and release) of the devtree_lock on sparc. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: merge of_attach_node() & of_detach_node()Grant Likely2-0/+75
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28Merge commit 'v2.6.33-rc5' into secretlab/test-devicetreeGrant Likely1-15/+290
2010-01-28of: unify phandle name in struct device_nodeGrant Likely1-4/+3
In struct device_node, the phandle is named 'linux_phandle' for PowerPC and MicroBlaze, and 'node' for SPARC. There is no good reason for the difference, it is just an artifact of the code diverging over a couple of years. This patch renames both to simply .phandle. Note: the .node also existed in PowerPC/MicroBlaze, but the only user seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't look like the assignment between .linux_phandle and .node is significantly different enough to warrant the separate code paths unless ibm,phandle properties actually appear in Apple device trees. I think it is safe to eliminate the old .node property and use phandle everywhere. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28of: Merge of_node_get() and of_node_put()Grant Likely1-0/+75
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28of: merge machine_is_compatible()Grant Likely1-0/+21
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-10of/flattree: merge early_init_dt_scan_chosen()Grant Likely1-0/+38
Merge common code between PowerPC and Microblaze. This patch splits the arch-specific stuff out into a new function, early_init_dt_scan_chosen_arch(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-10of/flattree: merge dt_mem_next_cellGrant Likely1-0/+8
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-10of/flattree: Merge earlyinit_dt_scan_root()Grant Likely1-0/+26
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-10of/flattree: Merge early_init_dt_check_for_initrd()Grant Likely1-0/+37
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09Merge commit 'origin/master' into nextBenjamin Herrenschmidt1-1/+25
Conflicts: include/linux/kvm.h
2009-11-23of: merge prom_{add,remove,modify}_propertyGrant Likely1-0/+116
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: Merge unflatten_device_treeGrant Likely1-0/+52
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: Merge unflatten_dt_nodeGrant Likely1-0/+200
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: Merge of_flat_dt_is_compatibleGrant Likely1-0/+24
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: merge of_get_flat_dt_propGrant Likely1-0/+43
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: merge of_get_flat_dt_rootGrant Likely1-0/+16
Merge common code between PowerPC and MicroBlaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: merge of_scan_flat_dtGrant Likely1-0/+64
Merge common code between PowerPC and Microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-11-23of/flattree: merge find_flat_dt_string and initial_boot_paramsGrant Likely3-0/+26
Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-10-30of/platform: Implement support for dev_pm_opsAnton Vorontsov1-15/+290
Linux power management subsystem supports vast amount of new PM callbacks that are crucial for proper suspend and hibernation support in drivers. This patch implements support for dev_pm_ops, preserving support for legacy callbacks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-15of: merge of_find_all_nodes() implementationsGrant Likely1-1/+25
Merge common code between Microblaze and PowerPC, and make it available to Sparc Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
2009-10-15of: Remove nested functionJérôme Pouiller1-6/+7
Some toolchains dislike nested function definition, so we define function match outside of of_phy_find_device. Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-09-23of: remove "stm,m25p40" aliasAnton Vorontsov1-1/+0
The alias isn't needed any longer since the m25p80 driver converted to the module device table matching. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-22of/mdio: Add support function for Ethernet fixed-link propertyAnton Vorontsov1-0/+42
Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet device drivers. The "OF MDIO rework" patches removed most of the support. Instead of re-adding fixed-link stuff to the drivers, this patch adds a support function for parsing the fixed-link property and obtaining a dummy phy to match. Note: the dummy phy handling in arch/powerpc is a bit of a hack and needs to be reworked. This function is being added now to solve the regression in the Ethernet drivers, but it should be considered a temporary measure until the fixed link handling can be reworked. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds4-0/+170
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits) pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US ipv4: Fix fib_trie rebalancing Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver Bluetooth: Fix Kconfig issue with RFKILL integration PIM-SM: namespace changes ipv4: update ARPD help text net: use a deferred timer in rt_check_expire ieee802154: fix kconfig bool/tristate muckup bonding: initialization rework bonding: use is_zero_ether_addr bonding: network device names are case sensative bonding: elminate bad refcount code bonding: fix style issues bonding: fix destructor bonding: remove bonding read/write semaphore bonding: initialize before registration bonding: bond_create always called with default parameters x_tables: Convert printk to pr_err netfilter: conntrack: optional reliable conntrack event delivery list_nulls: add hlist_nulls_add_head and hlist_nulls_del ...
2009-06-15Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds1-0/+1
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits) powerpc: Fix bug in move of altivec code to vector.S powerpc: Add support for swiotlb on 32-bit powerpc/spufs: Remove unused error path powerpc: Fix warning when printing a resource_size_t powerpc/xmon: Remove unused variable in xmon.c powerpc/pseries: Fix warnings when printing resource_size_t powerpc: Shield code specific to 64-bit server processors powerpc: Separate PACA fields for server CPUs powerpc: Split exception handling out of head_64.S powerpc: Introduce CONFIG_PPC_BOOK3S powerpc: Move VMX and VSX asm code to vector.S powerpc: Set init_bootmem_done on NUMA platforms as well powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock powerpc/mm: Fix some SMP issues with MMU context handling powerpc: Add PTRACE_SINGLEBLOCK support fbdev: Add PLB support and cleanup DCR in xilinxfb driver. powerpc/virtex: Add ml510 reference design device tree powerpc/virtex: Add Xilinx ML510 reference design support powerpc/virtex: refactor intc driver and add support for i8259 cascading powerpc/virtex: Add support for Xilinx PCI host bridge ...
2009-06-15Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6David S. Miller1-4/+4
Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-05-21microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek1-4/+4
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-19powerpc/85xx: Add STMicro M25P40 serial flash support for MPC8569E-MDSAnton Vorontsov1-0/+1
For serial flash support we need to: - Add QE Par IO Bank E device tree node, a GPIO from this bank is used for SPI chip-select line; - Add serial-flash node; - Add proper module alias into of/base.c. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-27openfirmware: Add OF phylib support codeGrant Likely3-0/+146
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27of: add of_parse_phandle() helper for parsing phandle propertiesGrant Likely1-0/+24
of_parse_phandle() is a helper function to read and parse a phandle property and return a pointer to the resulting device_node. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-01powerpc: add mmc-spi-slot bindingsAnton Vorontsov1-0/+1
The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09drivers/of: Add the of_find_i2c_device_by_node function.Jon Smirl1-0/+19
The of_find_i2c_device_by_node function allows you to follow a reference in the device tree to an i2c device node and then locate the linux device instantiated by the device tree. Example use: an I2S bus driver finding the i2c_device instance for a codec described by a device tree node. This was waiting for Anton's i2c patches that were just added. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21of/gpio: Implement of_gpio_count()Anton Vorontsov1-0/+34
This function is used to count how many GPIOs are specified for a device node. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of: of_parse_phandles_with_args() learns to differentiate 'hole' cellsAnton Vorontsov1-6/+16
Given this list (contains three gpio specifiers, one of which is a hole): gpios = <&phandle1 1 2 3 0 /* a hole */ &phandle2 4 5 6>; of_parse_phandles_with_args() would report -ENOENT for the `hole' specifier item, the same error value is used to report the end of the list, for example. Sometimes we want to differentiate holes from real errors -- for example when we want to count all the [syntax correct] specifiers. With this patch of_parse_phandles_with_args() will report -EEXITS when somebody requested to parse a hole. Also, make the out_{node,args} arguments optional, when counting we don't really need the out values. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of: Minor simplification for the of_parse_phandles_with_args()Anton Vorontsov1-7/+4
By using 'list++' in the beginning we can simplify the code a little bit. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03of/gpio: Implement of_get_gpio_flags()Anton Vorontsov1-7/+29
This adds a new function, of_get_gpio_flags, which is like of_get_gpio(), but accepts a new "flags" argument. This new function will be used by the drivers that need to retrieve additional GPIO information, such as active-low flag. Also, this changes the default ("simple") .xlate routine to warn about bogus (< 2) #gpio-cells usage: the second cell should always be present for GPIO flags. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03of/i2c: Fill the archdata for I2C devicesAnton Vorontsov1-0/+11
For I2C devices we just setting the node pointer in the archdata. This is needed so that the I2C devices could find their OF tree nodes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19of: Add helpers for finding device nodes which have a given propertyMichael Ellerman1-0/+35
This commit adds a routine for finding a device node which has a certain property. The contents of the property are not taken into account, merely the presence or absence of the property. Based on that routine, we add a for_each_ macro for iterating over all nodes that have a certain property. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.