aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/host (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-04-05Revert "PCI: imx6: Add support for active-low reset GPIO"Fabio Estevam1-6/+14
Commit 5c5fb40de8f1 ("PCI: imx6: Add support for active-low reset GPIO") cause regressions on some boards like MX6 Gateworks Ventana, for example. The reason for the breakage is that this commit sets the GPIO polarity in the wrong logic level. Also, the commit log is wrong because active-low reset GPIO is what the driver used to support since the beginning. So keep the old behavior that ignores the GPIO polarity specified in the device tree and treat the PCI reset GPIO as active-low. Reported-by: Krzysztof Hałasa <khalasa@piap.pl> Tested-by: Tim Harvey <tharvey@gateworks.com> # Gateworks Ventana Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> CC: stable@vger.kernel.org # v4.5+
2016-03-22Revert "PCI: dra7xx: Mark driver as broken"Sekhar Nori1-1/+0
Revert 5c3b99d05752 ("PCI: dra7xx: Mark driver as broken"). 1c96bee4df19 ("ARM: DRA7: hwmod: Add custom reset handler for PCIeSS") added support to de-assert PCIe reset, so DRA7x PCIe is not broken anymore. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-16Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds23-528/+4633
Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-15Merge branch 'pci/host-hv' into nextBjorn Helgaas2-0/+2347
* pci/host-hv: PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs PCI: Look up IRQ domain by fwnode_handle PCI: Add fwnode_handle to x86 pci_sysdata
2016-03-15Merge branch 'pci/host-designware' into nextBjorn Helgaas11-77/+202
* pci/host-designware: PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() ARC: Add PCI support
2016-03-15Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into nextBjorn Helgaas13-376/+2038
* pci/host-altera: PCI: altera: Fix altera_pcie_link_is_up() * pci/host-imx6: PCI: imx6: Add DT bindings to configure PHY Tx driver settings * pci/host-keystone: PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER * pci/host-rcar: PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE * pci/host-tegra: PCI: tegra: Remove misleading PHYS_OFFSET PCI: tegra: Track bus -> CPU mapping PCI: tegra: Remove unused struct tegra_pcie.num_ports field PCI: tegra: Implement ->{add,remove}_bus() callbacks PCI: Add pci_ops.{add,remove}_bus() callbacks * pci/host-thunder: PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() PCI: generic: Move structure definitions to separate header file * pci/host-vmd: x86/PCI: VMD: Attach VMD resources to parent domain's resource tree x86/PCI: VMD: Set bus resource start to 0 x86/PCI: VMD: Document code for maintainability * pci/host-xilinx: microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver PCI: xilinx: Update Zynq binding with Microblaze node PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze PCI: xilinx: Remove dependency on ARM-specific struct hw_pci PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT * pci/host-xilinx-nwl: PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller
2016-03-15PCI: designware: Add driver for prototyping kits based on ARC SDPJoao Pinto3-0/+150
Add a reference platform driver for PCI RC IP Protoyping Kits based on the ARC SDP. [bhelgaas: changelog, split patch up, MAINTAINERS update] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-15PCI: designware: Add default link up check if sub-driver doesn't overrideJoao Pinto1-1/+9
Add a default DesignWare "link_up" test for use when a sub-driver doesn't supply its own pcie_host_ops.link_up() method. [bhelgaas: changelog, split into its own patch] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-15PCI: designware: Add generic dw_pcie_wait_for_link()Joao Pinto8-59/+39
Several DesignWare-based drivers (dra7xx, exynos, imx6, keystone, qcom, and spear13xx) had similar loops waiting for the link to come up. Add a generic dw_pcie_wait_for_link() for use by all these drivers so the waiting is done consistently, e.g., always using usleep_range() rather than mdelay() and using similar timeouts and retry counts. Note that this changes the Keystone link training/wait for link strategy, so we initiate link training, then wait longer for the link to come up before re-initiating link training. [bhelgaas: changelog, split into its own patch, update pci-keystone.c, pcie-qcom.c] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-03-11PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devicesDavid Daney3-0/+411
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root complexes. These root complexes (loosely referred to as ECAM units in the hardware manuals) are used to access the Thunder on-chip devices. They are special in that all the BARs on devices behind these root complexes are at fixed addresses. Add a driver for these devices that synthesizes Enhanced Allocation (EA) capability entries for each BAR. Since this EA synthesis is needed for exactly two chip models, we can hard- code some assumptions about the device topology and the layout of the config space of specific DEVFNs in the driver. [bhelgaas: changelog, whitespace] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2016-03-11PCI: thunder: Add PCIe host driver for ThunderX processorsDavid Daney3-0/+354
The root complexes used to access off-chip PCIe devices (called PEM units in the hardware manuals) on some Cavium ThunderX processors require quirky access methods for the config space of the PCIe bridge. Add a driver to provide these config space accessor functions. Use the pci-host-common code to configure the PCI machinery. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-03-11PCI: generic: Expose pci_host_common_probe() for use by other driversDavid Daney5-165/+202
Move pci_host_common_probe() and associated functions to pci-host-common.c, where it can be shared with other drivers. Make it public (not static) and update Kconfig and Makefile to build it. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()David Daney1-8/+17
Factor gen_pci_probe(), moving most of it into pci_host_common_probe() where it can be shared with other drivers that have slightly different config accessors. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: generic: Move structure definitions to separate header fileDavid Daney2-18/+45
Move definitions for generic PCI host controller driver structures to a separate header file so we can share them with other drivers. No functional change intended. [bhelgaas: split into separate patch, changelog] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com>
2016-03-11PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host ControllerBharat Kumar Gogada3-0/+892
Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP. [bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2016-03-11PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFERShawn Lin1-0/+3
A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all, that's fine. But if devm_phy_get() finds a PHY that doesn't have a driver yet, it returns -EPROBE_DEFER. In that case, defer probing the Keystone driver. We may be able to load it later after a PHY driver is loaded. [bhelgaas: changelog, check for -EPROBE_DEFER first] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11PCI: altera: Fix altera_pcie_link_is_up()Ley Foon Tan1-1/+2
Originally altera_pcie_link_is_up() decided the link was up if any of the low four bits of the LTSSM register were set. But the link is only up if the LTSSM state is L0, so check for that exact value. [bhelgaas: changelog] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILESimon Horman1-2/+2
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS. The motivation is that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-08PCI: tegra: Remove misleading PHYS_OFFSETThierry Reding1-1/+1
BARs are disabled when the size register is 0, so it's misleading to write a base address into the start register. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Track bus -> CPU mappingThierry Reding1-0/+28
Track the offsets of the bus -> CPU mapping for I/O and memory. This is cosmetic for current Tegra chips because the offset is always 0. But to properly support legacy use-cases, like VGA, this would be needed so that PCI bus addresses can be relocated. While at it, also request the I/O resource both in physical memory and I/O space to make /proc/iomem consistent, as well as add the I/O region to the list of host bridge resources. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Remove unused struct tegra_pcie.num_ports fieldThierry Reding1-1/+0
The num_ports field of the tegra_pcie structure is never used so remove it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08PCI: tegra: Implement ->{add,remove}_bus() callbacksThierry Reding1-20/+34
The configuration space mapping on Tegra is somewhat special, and in order to avoid wasting virtual address space the configuration space for each bus needs to be stitched together from several blocks which form a single continuous virtual address range for accessors. Currently the configuration space is mapped upon the first access to one of its registers. However, the mapping operation may sleep under certain circumstances, so doing it from the configuration space accessors (they are protected by a spin lock) will trigger a warning. To avoid the warning, use the ->add_bus() callback to perform the mapping at enumeration time when the operation is allowed to sleep. Also add an implementation of ->remove_bus() that undoes the mapping established by the ->add_bus() callback. While it isn't currently possible to unload the module, there is work underway to remedy this, and this code will come in handy when that happens. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driverBharat Kumar Gogada1-1/+1
Modify the Microblaze PCI subsystem to work with the generic drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq. [bhelgaas: changelog] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-03-08PCI: xilinx: Don't call pci_fixup_irqs() on MicroblazeBharat Kumar Gogada1-0/+2
The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is available there. But Microblaze will do IRQ fixup in pcibios_add_device(), so pci_fixup_irqs() is not available on Microblaze. Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both Zynq and Microblaze Architectures. [bhelgaas: revise changelog to show similarity to bdb8a1844f31 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-03-08PCI: xilinx: Remove dependency on ARM-specific struct hw_pciBharat Kumar Gogada1-66/+16
The Xilinx PCIe host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. [bhelgaas: revise changelog to show similarity to 79953dd22c1d ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-03-08PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DTBharat Kumar Gogada1-102/+5
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF DT parser. [bhelgaas: revise changelog to show similarity to 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-02-29PCI: imx6: Add DT bindings to configure PHY Tx driver settingsJustin Waters1-5/+37
The settings in GPR8 are dependent upon the particular layout of the hardware platform. As such, they should be configurable via the device tree. Look up PHY Tx driver settings from the device tree. Fall back to the original hard-coded values if they are not specified in the device tree. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
2016-02-29PCI: layerscape: Fix MSG TLP drop settingMinghuan Lian1-8/+13
Some kinds of Layerscape PCIe controllers will forward the received message TLPs to system application address space, which could corrupt system memory or lead to a system hang. Enable MSG_DROP to fix this issue. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-29PCI: keystone: Fix MSI code that retrieves struct pcie_port pointerMurali Karicheri1-8/+3
Commit cbce7900598c ("PCI: designware: Make driver arch-agnostic") changed the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare pcie_port structure, and changed pcie-designware.c to reflect that. But it did not change the corresponding code in pci-keystone-dw.c, so it caused crashes on Keystone: Unable to handle kernel NULL pointer dereference at virtual address 00000030 pgd = c0003000 [00000030] *pgd=80000800004003, *pmd=00000000 Internal error: Oops: 206 [#1] PREEMPT SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.2-00139-gb74f926 #2 Hardware name: Keystone PC is at ks_dw_pcie_msi_irq_unmask+0x24/0x58 Change pci-keystone-dw.c to expect sysdata to be the struct pcie_port pointer. [bhelgaas: changelog] Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.4+ CC: Zhou Wang <wangzhou1@hisilicon.com>
2016-02-27PCI: mvebu: Restrict build to 32-bit ARMThierry Reding1-0/+1
This driver uses PCI glue that is only available on 32-bit ARM. This used to work fine as long as ARCH_MVEBU and ARCH_DOVE were exclusively 32-bit, but there's a patch in the pipe to make ARCH_MVEBU also available on 64-bit ARM. [bhelgaas: changelog; patch is coming but not merged yet] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-16PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMsJake Oshins2-0/+2347
Add a new driver which exposes a root PCI bus whenever a PCI Express device is passed through to a guest VM under Hyper-V. The device can be single- or multi-function. The interrupts for the devices are managed by an IRQ domain, implemented within the driver. [bhelgaas: fold in race condition fix (http://lkml.kernel.org/r/1456340196-13717-1-git-send-email-jakeo@microsoft.com)] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-09Merge branches 'pci/host-designware', 'pci/host-imx6', 'pci/host-layerscape' and 'pci/host-rcar' into nextBjorn Helgaas4-98/+69
* pci/host-designware: PCI: designware: Remove PCI_PROBE_ONLY handling PCI: designware: Explain why we don't program ATU for some platforms * pci/host-imx6: PCI: imx6: Move link up check into imx6_pcie_wait_for_link() PCI: imx6: Remove broken Gen2 workaround PCI: imx6: Move PHY reset into imx6_pcie_establish_link() PCI: imx6: Move imx6_pcie_reset_phy() near other PHY handling functions * pci/host-layerscape: PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID * pci/host-rcar: PCI: rcar: Remove PCI_PROBE_ONLY handling
2016-02-09PCI: designware: Remove PCI_PROBE_ONLY handlingLorenzo Pieralisi1-6/+4
The PCIe designware host driver is not used in system configurations requiring the PCI_PROBE_ONLY flag to be set to prevent resources assignment, therefore the driver code handling the flag can be removed from the kernel. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com> Acked-by: Jingoo Han Jingoo Han <jingoohan1@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com> Cc: Zhou Wang <wangzhou1@hisilicon.com>
2016-02-09PCI: designware: Explain why we don't program ATU for some platformsJisheng Zhang1-0/+5
Some platforms don't support ATU, e.g., pci-keystone.c. These platforms use their own address translation component rather than ATU, and they provide the rd_other_conf and wr_other_conf methods to program the translation component and perform the access. Add a comment to explain why we don't program the ATU for these platforms. [bhelgaas: changelog] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-05PCI: layerscape: Add "fsl,ls2085a-pcie" compatible IDYang Shi1-0/+1
The Layerscape PCI host driver must recognize ls2085a compatible when using firmware with ls2085a compatible property, otherwise the PCI bus won't be detected even though ls2085a compatible is included by the dts. Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-05PCI: rcar: Remove PCI_PROBE_ONLY handlingLorenzo Pieralisi1-9/+5
The PCIe rcar host driver is not used in system configurations requiring the PCI_PROBE_ONLY flag to be set to prevent resources assignment, therefore the driver code handling the flag can be removed from the kernel. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Phil Edworthy <phil.edworthy@renesas.com>
2016-01-27PCI: iproc: Allow multiple devices except on PAXCRay Jui1-18/+11
Commit 943ebae781f5 ("PCI: iproc: Add PAXC interface support") only allowed device 0, which is a regression on BCMA-based platforms. All systems support only one device, a Root Port at 00:00.0, on the root bus. PAXC-based systems support only the Root Port (00:00.0) and a single device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc. Non-PAXC systems support arbitrary devices below the Root Port. [bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check] Fixes: 943ebae781f5 ("PCI: iproc: Add PAXC interface support") Reported-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25PCI: imx6: Move link up check into imx6_pcie_wait_for_link()Lucas Stach1-38/+22
imx6_pcie_link_up() previously used usleep_range() to wait for the link to come up. Since it may be called while holding the config spinlock, the sleep causes a "BUG: scheduling while atomic" error. Instead of waiting for the link to come up in imx6_pcie_link_up(), do the waiting in imx6_pcie_wait_for_link(), where we're not holding a lock and sleeping is allowed. [bhelgaas: changelog, references to bugzilla and f95d3ae77191] Link: https://bugzilla.kernel.org/show_bug.cgi?id=100031 Fixes: f95d3ae77191 ("PCI: imx6: Wait for retraining") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25PCI: imx6: Remove broken Gen2 workaroundLucas Stach1-16/+1
Remove the remnants of the workaround for erratum ERR005184 which was never completely implemented. The checks alone don't carry any value as we don't act properly on the result. A workaround should be added to the lane speed change in establish_link later. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25PCI: imx6: Move PHY reset into imx6_pcie_establish_link()Lucas Stach1-13/+15
This adds the PHY reset into a common error path of imx6_pcie_establish_link(), deduplicating some of the debug prints. Also reduce the severity of the "no-link" message in the one place where it is expected to be hit when no peripheral is attached. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25PCI: imx6: Move imx6_pcie_reset_phy() near other PHY handling functionsLucas Stach1-17/+17
Move imx6_pcie_reset_phy() near the other PHY related functions in the file. This is a cosmetic change, but also allows to do the following changes without introducing needless forward declarations. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-21Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds20-204/+1897
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2016-01-20Merge branch 'pci/trivial' into nextBjorn Helgaas1-1/+1
* pci/trivial: PCI: shpchp: Constify hpc_ops structure PCI: Use kobj_to_dev() instead of open-coding it PCI: Use to_pci_dev() instead of open-coding it PCI: Fix all whitespace issues PCI/MSI: Fix typos in <linux/msi.h>
2016-01-15Merge branches 'pci/host', 'pci/host-designware', 'pci/host-hisi', 'pci/host-qcom' and 'pci/host-rcar' into nextBjorn Helgaas12-81/+796
* pci/host: PCI: host: Add of_pci_get_host_bridge_resources() stub PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD * pci/host-designware: PCI: designware: Make config accessor override checking symmetric PCI: designware: Simplify control flow * pci/host-hisi: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers * pci/host-qcom: ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: qcom: Add Qualcomm PCIe controller driver PCI: qcom: Document PCIe devicetree bindings PCI: designware: Ensure ATU is enabled before IO/conf space accesses * pci/host-rcar: PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
2016-01-11PCI: rcar: Add Gen2 PHY setup to pcie-rcarPhil Edworthy1-3/+28
For PCIe compliance, the PHY registers need setting as per the manual. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-01-11PCI: rcar: Add runtime PM support to pcie-rcarPhil Edworthy1-12/+32
If runtime PM is enabled in the kernel config, simply enable the clocks once during probe. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-01-11PCI: designware: Make config accessor override checking symmetricBjorn Helgaas1-6/+6
Drivers based on the DesignWare core can override the config read accessors by supplying rd_own_conf() and rd_other_conf() function pointers. dw_pcie_rd_conf() calls dw_pcie_rd_own_conf() (for accesses to the root bus) or dw_pcie_rd_other_conf(): dw_pcie_rd_conf dw_pcie_rd_own_conf # if on root bus dw_pcie_rd_other_conf # if not on root bus Previously we checked for rd_other_conf() directly in dw_pcie_rd_conf(), but we checked for rd_own_conf() in dw_pcie_rd_own_conf(). Check for rd_other_conf() in dw_pcie_rd_other_conf() to make this symmetric with the rd_own_conf() checking, and similarly for the write path. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-01-08PCI: rcar: Remove unused pci_sys_data struct from pcie-rcarPhil Edworthy1-9/+0
The pci_sys_data struct was previously used by pci_common_init_dev() and by the ARM pcibios_align_resource(), but recent commits removed those uses: cbce7900598c ("PCI: designware: Make driver arch-agnostic") b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer") cbce7900598c removed the use of pci_common_init_dev() by DesignWare drivers, including pcie-rcar.c, and b3a72384fe29 removed the use of struct pci_sys_data by the ARM pcibios_align_resource(). Remove struct pci_sys_data from pcie-rcar.c. [bhelgaas: changelog] Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-08PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllersGabriele Paoloni2-13/+68
Add support for the HiSilicon Hip06 SoC. Documentation has been updated to include Hip06. Add Gabriele Paoloni as maintainer of the driver. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
2016-01-08PCI: Fix all whitespace issuesBogicevic Sasa1-1/+1
Fix all whitespace issues (missing or needed whitespace) in all files in drivers/pci. Code is compiled with allyesconfig before and after code changes and objects are recorded and checked with objdiff and they are not changed after this commit. Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.