aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/msi.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-0/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas1-0/+1
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-4/+3
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-18PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core codeThomas Gleixner1-0/+2
If interrupt reservation mode is enabled then the PCI/MSI interrupts must be reactivated after early activation. Make sure that all callers of pci_msi_create_irq_domain() have the MSI_FLAG_MUST_REACTIVATE set when reservation mode is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Link: https://lkml.kernel.org/r/20171017075600.448649905@linutronix.de
2017-09-08Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-5/+22
Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-08-25PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULLChristoph Hellwig1-10/+3
irq_create_affinity_masks() can return NULL on non-SMP systems, when there are not enough "free" vectors available to spread, or if memory allocation for the CPU masks fails. Only the allocation failure is of interest, and even then the system will work just fine except for non-optimally spread vectors. Thus remove the warnings. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2017-08-14PCI/MSI: Assume MSIs use real Requester ID, not an aliasRobin Murphy1-5/+22
Currently, we handle all DMA aliases equally when calculating MSI requester IDs for the generic infrastructure. This turns out to be the wrong thing to do in the face of pure DMA quirks like those of Marvell SATA cards, where in the usual case the last thing seen in the alias walk is the DMA phantom function: we end up configuring the MSI doorbell to expect that alias, then find we have no interrupts since the MSI writes still come from the 'real' RID, thus get filtered out and ignored. Improve the alias walk to only account for the topological aliases that matter, based on the logic from the Intel IRQ remapping code. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-08Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-12/+2
Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2017-06-22irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded accessMarc Zyngier1-1/+1
Now that we have irq_domain_update_bus_token(), switch everyone over to it. The debugfs code thanks you for your continued support. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-22PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecsMichael Hernandez1-12/+2
min_vecs is the minimum amount of vectors needed to operate in MSI-X mode which may just include the vectors that don't need affinity. Disabling affinity settings causes the qla2xxx driver scsi_add_host() to fail when blk_mq is enabled as the blk_mq_pci_map_queues() expects affinity masks on each vector. Fixes: dfef358bd1be ("PCI/MSI: Don't apply affinity if there aren't enough vectors left") Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v4.10+
2017-05-08Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-5/+12
Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-28Merge branch 'pci/msi' into nextBjorn Helgaas1-4/+6
* pci/msi: PCI/MSI: Use dev_printk() when possible of/pci: Remove unused MSI controller helpers PCI: mvebu: Remove useless MSI enabling code PCI: aardvark: Move to MSI handling using generic MSI support PCI/MSI: Make pci_msi_shutdown() and pci_msix_shutdown() static PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
2017-04-11PCI: remove pci_enable_msixChristoph Hellwig1-21/+0
Unused now that all callers switched to pci_alloc_irq_vectors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29PCI/MSI: Skip disabling disconnected devicesKeith Busch1-1/+6
Check the device connected state prior to executing device shutdown operations or writing MSI messages so that tear down on disconnected devices completes quicker. Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-23PCI/MSI: Use dev_printk() when possibleBjorn Helgaas1-2/+4
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. This changes messages like this: Unable to allocate affinity masks, ignoring to this: pci 0000:01:00.0: can't allocate MSI affinity masks for 4 vectors Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-09PCI/MSI: Make pci_msi_shutdown() and pci_msix_shutdown() staticBjorn Helgaas1-2/+2
pci_msi_shutdown() and pci_msix_shutdown() are used only in drivers/pci/msi.c, so make them static. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-02PCI: add an API to get node from vectorShaohua Li1-0/+16
Next patch will use the API to get the node from vector for nvme device Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-23Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-100/+22
Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
2017-02-17PCI/MSI: Fix msi_desc->affinity memory leak when freeing MSI IRQsPrarit Bhargava1-1/+1
During device setup, msix_setup_entries() and msi_setup_entry() allocate msi_desc by calling alloc_msi_entry(). alloc_msi_entry() can also allocate a affinity cpumask. During device teardown free_msi_irqs() is called and the msi_desc is freed, but the affinity cpumask is leaked. Fix it by calling free_msi_entry() which frees both the msi_desc and the affinity cpumask. [bhelgaas: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") moved alloc_msi_entry() from drivers/pci/msi.c to kernel/irq/msi.c and added a new corresponding free_msi_entry() interface. After aa48b6f70886, pci/msi.c used alloc_msi_entry(), but did its own kfree() instead of using free_msi_entry(). 28f4b04143c5 ("genirq/msi: Add cpumask allocation to alloc_msi_entry") added affinity to both alloc_msi_entry() and free_msi_entry(), but pci/msi.c didn't use free_msi_entry(), resulting in this leak.] Fixes: aa48b6f70886 ("genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Myron Stowe <mstowe@redhat.com>
2017-02-10PCI/MSI: Return -ENOSPC if pci_enable_msi_range() can't get enough vectorsDennis Chen1-1/+1
If device doesn't support as many MSI vectors as the driver requested, we previously returned -EINVAL from __pci_enable_msi_range() and pci_enable_msi_range(). In other similar situations in both __pci_enable_msi_range() and __pci_enable_msix_range(), we returned -ENOSPC. Return -ENOSPC from __pci_enable_msi_range() so we do it consistently. [bhelgaas: changelog] Signed-off-by: Dennis Chen <dennis.chen@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tejun Heo <tj@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Tom Long Nguyen <tom.l.nguyen@intel.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Marc Zyngier <marc.zyngier@arm.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: Steve Capper <steve.capper@arm.com>
2017-02-10PCI/MSI: Check that we have a legacy interrupt line before using itChristoph Hellwig1-3/+5
It seems like there are some devices (e.g. the PCIe root port driver) that may not always have a INTx interrupt. Check for dev->irq before returning a legacy interrupt in pci_irq_alloc_vectors to properly handle this case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/MSI: Remove pci_msi_domain_{alloc,free}_irqs()Christoph Hellwig1-28/+2
Just call the msi_* version directly instead of having trivial wrappers for one or two callsites. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10PCI/MSI: Remove unused pci_msi_create_default_irq_domain()Christoph Hellwig1-48/+2
pci_msi_create_default_irq_domain() is never called in the whole tree, so remove it as well as all the supporting code for a default PCI MSI domain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10PCI/MSI: Return failure when msix_setup_entries() failsChristophe JAILLET1-1/+1
If alloc_msi_entry() fails, we free resources and set ret = -ENOMEM. However, msix_setup_entries() returns 0 unconditionally. Return the error code instead. Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-02PCI/MSI: Don't apply affinity if there aren't enough vectors leftChristoph Hellwig1-0/+10
Bart reported a problem wіth an out of bounds access in the low-level IRQ affinity code, which we root caused to the qla2xxx driver assigning all its MSI-X vectors to the pre and post vectors, and not having any left for the actually spread IRQs. Fix this issue by not asking for affinity assignment when there are no vectors to assign left. Fixes: 402723ad5c62 ("PCI/MSI: Provide pci_alloc_irq_vectors_affinity()") Link: https://lkml.kernel.org/r/1485359225.3093.3.camel@sandisk.com Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-13PCI/MSI: Remove pci_enable_msi_{exact,range}()Christoph Hellwig1-17/+9
All multi-MSI allocations are now done through pci_irq_alloc_vectors(), so remove the old pci_enable_msi_range() and pci_enable_msi_exact() interfaces. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-11PCI/MSI: Fix msi_capability_init() kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warnings in pci/msi.c: ..//drivers/pci/msi.c:623: warning: No description found for parameter 'affd' ..//drivers/pci/msi.c:623: warning: Excess function parameter 'affinity' description in 'msi_capability_init' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-15Merge tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+2
Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-11-09PCI/MSI: Provide pci_alloc_irq_vectors_affinity()Christoph Hellwig1-7/+13
This is a variant of pci_alloc_irq_vectors() that allows passing a struct irq_affinity to provide fine-grained IRQ affinity control. For now this means being able to exclude vectors at the beginning or end of the MSI vector space, but it could also be used for any other quirks needed in the future (e.g. more vectors than CPUs, or excluding CPUs from the spreading). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-6-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09PCI/MSI: Propagate IRQ affinity description through the MSI codeChristoph Hellwig1-33/+33
No API change yet, just pass it down all the way from pci_alloc_irq_vectors() to the core MSI code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-5-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09genirq/affinity: Handle pre/post vectors in irq_create_affinity_masks()Christoph Hellwig1-2/+4
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09genirq/affinity: Handle pre/post vectors in irq_calc_affinity_vectors()Christoph Hellwig1-4/+4
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-08PCI/MSI: Check for NULL affinity mask in pci_irq_get_affinity()Jan Beulich1-1/+2
If msi_setup_entry() fails to allocate an affinity mask, it logs a message but continues on and allocates an MSI entry with entry->affinity == NULL. Check for this case in pci_irq_get_affinity() so we don't try to dereference a NULL pointer. [bhelgaas: changelog] Fixes: ee8d41e53efe "pci/msi: Retrieve affinity for a vector" Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Thomas Gleixner <tglx@linutronix.de>
2016-10-26doc: Add missing parameter for msi_setupStephen Hemminger1-0/+2
commit 92ca8d20dee2 ("genirq/msi: Switch to new irq spreading") introduced new parameter to msi_init_setup and but did not update docbook comments. Fixes 'make htmldocs' warning. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: bhelgaas@google.com Cc: linux-pci@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-15Merge branch 'irq/for-block' into irq/coreThomas Gleixner1-58/+103
Add the new irq spreading infrastructure.
2016-09-14pci/msi: Retrieve affinity for a vectorThomas Gleixner1-0/+31
Add a helper to get the affinity mask for a given PCI irq vector. For MSI or MSI-X vectors these are stored by the IRQ core, while for legacy interrupts we will always return cpu_possible_map. [hch: updated to follow the style of pci_irq_vector()] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-6-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14genirq/msi: Switch to new irq spreading infrastructureThomas Gleixner1-56/+72
Switch MSI over to the new spreading code. If a pci device contains a valid pointer to a cpumask, then this mask is used for spreading otherwise the online cpu mask is used. This allows a driver to restrict the spread to a subset of CPUs, e.g. cpus on a particular node. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14genirq/msi: Add cpumask allocation to alloc_msi_entryThomas Gleixner1-4/+2
For irq spreading want to store affinity masks in the msi_entry. Add the infrastructure for it. We allocate an array of cpumasks with an array size of the number of used vectors in the entry, so we can hand in the information per linux interrupt later. As we hand in the number of used vectors, we assign them right away. Convert all the call sites. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de
2016-09-12PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI tableTomasz Nowicki1-3/+8
It is possible to provide information about which MSI controller to use on a per-device basis for DT. This patch supply this with ACPI support. Currently, IORT is the only one ACPI table which can provide such mapping. In order to plug IORT into MSI infrastructure we are adding ACPI equivalents for finding PCI device domain and its RID translation (pci_msi_domain_get_msi_rid and pci_msi_domain_get_msi_rid calls). Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-26Merge tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-8/+10
Pull PCI fixes from Bjorn Helgaas: "Resource management: - Update "pci=resource_alignment" documentation (Mathias Koehrer) MSI: - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig) - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig) Intel VMD host bridge driver: - Fix infinite loop executing irq's (Keith Busch)" * tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: VMD: Fix infinite loop executing irq's PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation
2016-08-18PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()Christoph Hellwig1-1/+4
ahci currently insists on an explicit call to pci_intx() before falling back from MSI or MSI-X to legacy IRQs. As pci_intx() is a no-op if the command register already contains the right value it seems safe and useful to add this call to pci_alloc_irq_vectors() so that ahci can just use pci_alloc_irq_vectors(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-16PCI: Use positive flags in pci_alloc_irq_vectors()Christoph Hellwig1-8/+7
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of certain interrupt types, pass positive flags like PCI_IRQ_LEGACY, PCI_IRQ_MSI, etc., to specify the acceptable interrupt types. This is based on a number of pending driver conversions that just happend to be a whole more obvious to read this way, and given that we have no users in the tree yet it can still easily be done. I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting all interrupt types very simple. [bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of PCI_IRQ_NOLEGACY] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-08-09genirq/msi: Make sure PCI MSIs are activated earlyMarc Zyngier1-0/+2
Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru> Reported-by: Matthias Prager <linux@matthiasprager.de> Reported-by: Jason Taylor <jason.taylor@simplivity.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-21PCI: Spread interrupt vectors in pci_alloc_irq_vectors()Christoph Hellwig1-45/+89
Set the affinity_mask in the PCI device before allocating vectors so that the affinity can be propagated through the MSI descriptor structures to the core IRQ code. To facilitate this, new __pci_enable_msi_range() and __pci_enable_msix_range() helpers are factored out of their not prefixed variants which assigning the new IRQ affinity mask in the PCI device so that the low-level interrupt code can perform the interrupt affinity assignment and do node-local allocations. A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that this function can also be used by drivers that don't wish to use the automatic affinity assignment. [bhelgaas: omit "else" after "return" consistently] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Provide sensible IRQ vector alloc/free routinesChristoph Hellwig1-0/+89
Add a function to allocate and free a range of interrupt vectors, using MSI-X, MSI or legacy vectors (in that order) based on the capabilities of the underlying device and PCIe complex. Additionally a new helper is provided to get the Linux IRQ number for given device-relative vector so that the drivers don't need to allocate their own arrays to keep track of the vectors for the multi vector MSI-X case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Make the "entries" argument to pci_enable_msix() optionalChristoph Hellwig1-14/+16
The "entries" argument isn't needed if the list of entries does not contain any holes. Make it optional so that we can avoid the need to allocate a msix_entry structure for this (common) case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Switch msix_program_entries() to use pci_msix_desc_addr()Christoph Hellwig1-4/+2
Instead of relying on the msix_entry structure for the vector number, read it from the msi_desc. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21PCI: Add pci_msix_desc_addr() helperChristoph Hellwig1-8/+9
Add a pci_msix_desc_addr() helper to factor out the calculation of the base address for a given MSI-X vector. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-01-21Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-4/+0
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2015-12-20genirq/msi: Export functions to allow MSI domains in modulesJake Oshins1-0/+4
The Linux kernel already has the concept of IRQ domain, wherein a component can expose a set of IRQs which are managed by a particular interrupt controller chip or other subsystem. The PCI driver exposes the notion of an IRQ domain for Message-Signaled Interrupts (MSI) from PCI Express devices. This patch exposes the functions which are necessary for creating a MSI IRQ domain within a module. [ tglx: Split it into x86 and core irq parts ] Signed-off-by: Jake Oshins <jakeo@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: kys@microsoft.com Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: vkuznets@redhat.com Cc: haiyangz@microsoft.com Cc: marc.zyngier@arm.com Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1449769983-12948-4-git-send-email-jakeo@microsoft.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.