aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-01-17PCI: Fix __initdata issue with "pci=disable_acs_redir" parameterLogan Gunthorpe1-1/+2
The disable_acs_redir parameter stores a pointer to the string passed to pci_setup(). However, the string passed to PCI setup is actually a temporary copy allocated in static __initdata memory. After init, once the memory is freed, it is no longer valid to reference this pointer. This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") caused pci_disable_acs_redir() to be called during shutdown which manifested as an unable to handle kernel paging request at: RIP: 0010:pci_enable_acs+0x3f/0x1e0 Call Trace: pci_restore_state.part.44+0x159/0x3c0 pci_restore_standard_config+0x33/0x40 pci_pm_runtime_resume+0x2b/0xd0 ? pci_restore_standard_config+0x40/0x40 __rpm_callback+0xbc/0x1b0 rpm_callback+0x1f/0x70 ? pci_restore_standard_config+0x40/0x40 rpm_resume+0x4f9/0x710 ? pci_conf1_read+0xb6/0xf0 ? pci_conf1_write+0xb2/0xe0 __pm_runtime_resume+0x47/0x70 pci_device_shutdown+0x1e/0x60 device_shutdown+0x14a/0x1f0 kernel_restart+0xe/0x50 __do_sys_reboot+0x1ee/0x210 ? __fput+0x144/0x1d0 do_writev+0x5e/0xf0 ? do_writev+0x5e/0xf0 do_syscall_64+0x48/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It was also likely possible to trigger this bug when hotplugging PCI devices. To fix this, instead of storing a pointer, we use kstrdup() to copy the disable_acs_redir_param to its own buffer which will never be freed. Fixes: aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support") Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-11-30PCI: Fix incorrect value returned from pcie_get_speed_cap()Mikulas Patocka1-13/+11
The macros PCI_EXP_LNKCAP_SLS_*GB are values, not bit masks. We must mask the register and compare it against them. This fixes errors like this: amdgpu: [powerplay] failed to send message 261 ret is 0 when a PCIe-v3 card is plugged into a PCIe-v1 slot, because the slot is being incorrectly reported as PCIe-v3 capable. 6cf57be0f78e, which appeared in v4.17, added pcie_get_speed_cap() with the incorrect test of PCI_EXP_LNKCAP_SLS as a bitmask. 5d9a63304032, which appeared in v4.19, changed amdgpu to use pcie_get_speed_cap(), so the amdgpu bug reports below are regressions in v4.19. Fixes: 6cf57be0f78e ("PCI: Add pcie_get_speed_cap() to find max supported link speed") Fixes: 5d9a63304032 ("drm/amdgpu: use pcie functions for link width and speed") Link: https://bugs.freedesktop.org/show_bug.cgi?id=108704 Link: https://bugs.freedesktop.org/show_bug.cgi?id=108778 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> [bhelgaas: update comment, remove use of PCI_EXP_LNKCAP_SLS_8_0GB and PCI_EXP_LNKCAP_SLS_16_0GB since those should be covered by PCI_EXP_LNKCAP2, remove test of PCI_EXP_LNKCAP for zero, since that register is required] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # v4.17+
2018-10-25Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-15/+97
Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-20Merge branch 'pci/misc'Bjorn Helgaas1-3/+2
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) * pci/misc: PCI: pcie: Remove redundant 'default n' from Kconfig NTB: switchtec_ntb: Update switchtec documentation with prerequisites for NTB PCI: Fix Switchtec DMA aliasing quirk dmesg noise PCI: Add macro for Switchtec quirk declarations PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk PCI: Remove pci_set_dma_max_seg_size() PCI: Remove pci_set_dma_seg_boundary() PCI: Remove pci_unmap_addr() wrappers for DMA API PCI / ACPI: Mark expected switch fall-through PCI: Remove set but unused variable PCI: Fix pci.c kernel-doc parameter warning PCI: Allocate dma_alias_mask with bitmap_zalloc() PCI: Remove unused NFP32xx IDs
2018-10-20Merge branch 'pci/hotplug'Bjorn Helgaas1-11/+83
- Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) * pci/hotplug: PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI/AER: Use threaded IRQ for bottom half PCI/AER: Use kfifo_in_spinlocked() to insert locked elements PCI/AER: Use kfifo for tracking events instead of reimplementing it PCI/AER: Remove error source from AER struct aer_rpc PCI/AER: Remove unused aer_error_resume() PCI: Uninline PCI bus accessors for better ftracing PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls PCI: pnv_php: Use kmemdup() PCI: cpqphp: Remove set but not used variable 'physical_slot' PCI/ERR: Remove duplicated include from err.c PCI: Equalize hotplug memory and io for occupied and empty slots PCI / ACPI: Whitelist D3 for more PCIe hotplug ports ACPI / property: Allow multiple property compatible _DSD entries PCI/PME: Implement runtime PM callbacks PCI: pciehp: Implement runtime PM callbacks PCI/portdrv: Add runtime PM hooks for port service drivers PCI/portdrv: Resume upon exit from system suspend if left runtime suspended PCI: pciehp: Do not handle events if interrupts are masked PCI: pciehp: Disable hotplug interrupt during suspend PCI / ACPI: Enable wake automatically for power managed bridges PCI: Do not skip power-managed bridges in pci_enable_wake() PCI: Make link active reporting detection generic PCI: Unify device inaccessible PCI/ERR: Always report current recovery status for udev PCI/ERR: Simplify broadcast callouts PCI/ERR: Run error recovery callbacks for all affected devices PCI/ERR: Handle fatal error recovery PCI/ERR: Use slot reset if available PCI/AER: Don't read upstream ports below fatal errors PCI/AER: Take reference on error devices PCI/DPC: Save and restore config state PCI: portdrv: Restore PCI config state on slot reset PCI: portdrv: Initialize service drivers directly PCI: hotplug: Document TODOs PCI: hotplug: Embed hotplug_slot PCI: hotplug: Drop hotplug_slot_info PCI: hotplug: Constify hotplug_slot_ops PCI: pciehp: Reshuffle controller struct for clarity PCI: pciehp: Rename controller struct members for clarity PCI: pciehp: Unify controller and slot structs PCI: pciehp: Tolerate Presence Detect hardwired to zero PCI: pciehp: Drop hotplug_slot_ops wrappers PCI: pciehp: Drop unnecessary includes PCI: pciehp: Differentiate between surprise and safe removal PCI: Simplify disconnected marking
2018-10-02PCI / ACPI: Whitelist D3 for more PCIe hotplug portsMika Westerberg1-0/+9
In order to have better power management for Thunderbolt PCIe chains, Windows enables power management for native PCIe hotplug ports if there is the following ACPI _DSD attached to the root port: Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} } }) This is also documented in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) and then implement it for ACPI based systems so that the above property is checked. There is one catch, though. The initial pci_dev->bridge_d3 is set before the root port has ACPI companion bound (the device is not added to the PCI bus either) so we need to look up the ACPI companion manually in that case in acpi_pci_bridge_d3(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02PCI: Do not skip power-managed bridges in pci_enable_wake()Mika Westerberg1-3/+6
Commit baecc470d5fd ("PCI / PM: Skip bridges in pci_enable_wake()") changed pci_enable_wake() so that all bridges are skipped when wakeup is enabled (or disabled) with the reasoning that bridges can only signal wakeup on behalf of their subordinate devices. However, there are bridges that can signal wakeup themselves. For example PCIe downstream and root ports supporting hotplug may signal wakeup upon hotplug event. For this reason change pci_enable_wake() so that it skips all bridges except those that we power manage (->bridge_d3 is set). Those are the ones that can go into low power states and may need to signal wakeup. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02PCI: Make link active reporting detection genericKeith Busch1-6/+27
The spec has timing requirements when waiting for a link to become active after a conventional reset. Implement those hard delays when waiting for an active link so pciehp and dpc drivers don't need to duplicate this. For devices that don't support data link layer active reporting, wait the fixed time recommended by the PCIe spec. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-28PCI: Add support for Immediate ReadinessFelipe Balbi1-1/+12
PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register: Immediate Readiness – This optional bit, when Set, indicates the Function is guaranteed to be ready to successfully complete valid configuration accesses at any time following any reset that the host is capable of issuing Configuration Requests to this Function. When this bit is Set, for accesses to this Function, software is exempt from all requirements to delay configuration accesses following any type of reset, including but not limited to the timing requirements defined in Section 6.6. This means that all delays after a Conventional or Function Reset can be skipped. This patch reads such bit and caches its value in a flag inside struct pci_dev to be checked later if we should delay or can skip delays after a reset. While at that, also move the explicit msleep(100) call from pcie_flr() and pci_af_flr() to pci_dev_wait(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-27PCI: Reprogram bridge prefetch registers on resumeDaniel Drake1-8/+19
On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of NVIDIA GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM] Similarly, the NVIDIA proprietary driver also fails after resume (black screen, 100% CPU usage in Xorg process). We shipped a sample to NVIDIA for diagnosis, and their response indicated that it's a problem with the parent PCI bridge (on the Intel SoC), not the GPU. Runtime suspend/resume works fine, only S3 suspend is affected. We found a workaround: on resume, rewrite the Intel PCI bridge 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In the cases that I checked, this register has value 0 and we just have to rewrite that value. Linux already saves and restores PCI config space during suspend/resume, but this register was being skipped because upon resume, it already has value 0 (the correct, pre-suspend value). Intel appear to have previously acknowledged this behaviour and the requirement to rewrite this register: https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23 Based on that, rewrite the prefetch register values even when that appears unnecessary. We have confirmed this solution on all the affected models we have in-hands (X542UQ, UX533FD, X530UN, V272UN). Additionally, this solves an issue where r8169 MSI-X interrupts were broken after S3 suspend/resume on ASUS X441UAR. This issue was recently worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop that we had not yet patched. I suspect it will also fix the issue that was worked around in commit 7c53a722459c ("r8169: don't use MSI-X on RTL8168g"). Thomas Martitz reports that this change also solves an issue where the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3 suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069 Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Peter Wu <peter@lekensteyn.nl> CC: stable@vger.kernel.org
2018-09-21PCI/ERR: Use slot reset if availableKeith Busch1-0/+37
The secondary bus reset may have link side effects that a hotplug capable port may incorrectly react to. Use the slot specific reset for hotplug ports, fixing the undesirable link down-up handling during error recovering. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: fold in https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-20PCI/DPC: Save and restore config stateKeith Busch1-0/+2
This patch provides DPC save and restore capabilities. This is necessary for the driver to observe DPC events in the event the configuration space needs to be restored after a reset. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-18PCI: hotplug: Constify hotplug_slot_opsLukas Wunner1-2/+2
Hotplug drivers cannot declare their hotplug_slot_ops const, making them attractive targets for attackers, because upon registration of a hotplug slot, __pci_hp_initialize() writes to the "owner" and "mod_name" members in that struct. Fix by moving these members to struct hotplug_slot and constify every driver's hotplug_slot_ops except for pciehp. pciehp constructs its hotplug_slot_ops at runtime based on the PCIe port's capabilities, hence cannot declare them const. It can be converted to __write_rarely once that's mainlined: http://www.openwall.com/lists/kernel-hardening/2016/11/16/3 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> # drivers/pci/hotplug/rpa* Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org>
2018-09-17PCI: Fix pci.c kernel-doc parameter warningRandy Dunlap1-1/+1
Fix kernel-doc warning: ../drivers/pci/pci.c:218: warning: Excess function parameter 'p' description in 'pci_dev_str_match_path' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-17PCI: Allocate dma_alias_mask with bitmap_zalloc()Andy Shevchenko1-2/+1
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type ("unsigned long *") instead of the opaque "void *". Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-11IB/hfi1,PCI: Allow bus reset while probingDennis Dalessandro1-0/+1
Calling into the new API to reset the secondary bus results in a deadlock. This occurs because the device/bus is already locked at probe time. Reverting back to the old behavior while the API is improved. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985 Fixes: c6a44ba950d1 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()") Fixes: 409888e0966e ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Cc: Sinan Kaya <okaya@codeaurora.org>
2018-09-11PCI: Fix faulty logic in pci_reset_bus()Dennis Dalessandro1-1/+1
The pci_reset_bus() function calls pci_probe_reset_slot() to determine whether to call the slot or bus reset. The check has faulty logic in that it does not account for pci_probe_reset_slot() being able to return an errno. Fix by only calling the slot reset when the function returns 0. Fixes: 811c5cb37df4 ("PCI: Unify try slot and bus reset API") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Cc: Sinan Kaya <okaya@codeaurora.org>
2018-08-16Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-140/+363
Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-08-15Merge branch 'pci/virtualization'Bjorn Helgaas1-66/+26
- To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: Rename pci_try_reset_bus() to pci_reset_bus() PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions PCI: Unify try slot and bus reset API PCI: Hide pci_reset_bridge_secondary_bus() from drivers IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset PCI: Handle error return from pci_reset_bridge_secondary_bus() PCI/IOV: Tidy pci_sriov_set_totalvfs() PCI: Enable PASID only if entire path supports End-End TLP prefixes # Conflicts: # drivers/pci/hotplug/pciehp_hpc.c
2018-08-15Merge branch 'pci/switchtec'Bjorn Helgaas1-2/+13
- Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) * pci/switchtec: PCI: Expand documentation for pci_add_dma_alias() PCI: Add DMA alias quirk for Microsemi Switchtec NTB switchtec: Use generic PCI Vendor ID and Class Code # Conflicts: # drivers/pci/quirks.c
2018-08-15Merge branch 'pci/resource'Bjorn Helgaas1-2/+35
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) * pci/resource: PCI: Make pci_get_rom_size() static PCI: Add check code for last image indicator not set PCI: Avoid accessing memory outside the ROM BAR PCI: Make early dump functionality generic PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling PCI: Restore resized BAR state on resume PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources() # Conflicts: # Documentation/admin-guide/kernel-parameters.txt
2018-08-15Merge branch 'pci/peer-to-peer'Bjorn Helgaas1-56/+253
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) * pci/peer-to-peer: PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core
2018-08-15Merge branch 'pci/misc'Bjorn Helgaas1-0/+1
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) * pci/misc: PCI: Limit config space size for Netronome NFP5000 PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Unify PCI and normal DMA direction definitions PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough # Conflicts: # drivers/pci/hotplug/pciehp_ctrl.c
2018-08-15Merge branch 'pci/hotplug'Bjorn Helgaas1-6/+15
- Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) * pci/hotplug: PCI: pciehp: Deduplicate presence check on probe & resume PCI: pciehp: Avoid implicit fallthroughs in switch statements PCI: Whitelist Thunderbolt ports for runtime D3 PCI: Whitelist native hotplug ports for runtime D3 PCI: sysfs: Resume to D0 on function reset PCI: pciehp: Resume parent to D0 on config space access PCI: pciehp: Resume to D0 on enable/disable PCI: pciehp: Support interrupts sent from D3hot PCI: pciehp: Obey compulsory command delay after resume PCI: pciehp: Clear spurious events earlier on resume PCI: portdrv: Deduplicate PM callback iterator PCI: pciehp: Avoid slot access during reset PCI: pciehp: Always enable occupied slot on probe PCI: pciehp: Become resilient to missed events PCI: pciehp: Tolerate initially unstable link PCI: pciehp: Declare pciehp_enable/disable_slot() static PCI: pciehp: Drop enable/disable lock PCI: pciehp: Enable/disable exclusively from IRQ thread PCI: pciehp: Track enable/disable status PCI: pciehp: Publish to user space last on probe PCI: hotplug: Demidlayer registration with the core PCI: pciehp: Drop slot workqueue PCI: pciehp: Handle events synchronously PCI: pciehp: Stop blinking on slot enable failure PCI: pciehp: Convert to threaded polling PCI: pciehp: Convert to threaded IRQ PCI: pciehp: Document struct slot and struct controller PCI: pciehp: Declare pciehp_unconfigure_device() void PCI: pciehp: Drop unnecessary NULL pointer check PCI: pciehp: Fix unprotected list iteration in IRQ handler PCI: pciehp: Fix use-after-free on unplug PCI: hotplug: Don't leak pci_slot on registration failure PCI: hotplug: Delete skeleton driver PCI: shpchp: Separate existence of SHPC and permission to use it
2018-08-15Merge branch 'pci/enumeration'Bjorn Helgaas1-7/+20
- Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) * pci/enumeration: PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Check for PCIe Link downtraining PCI: Workaround IDT switch ACS Source Validation erratum
2018-08-15Merge branch 'pci/aspm'Bjorn Helgaas1-1/+0
- Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) * pci/aspm: PCI: Remove unnecessary include of <linux/pci-aspm.h> iwlwifi: Remove unnecessary include of <linux/pci-aspm.h> ath9k: Remove unnecessary include of <linux/pci-aspm.h> igb: Remove unnecessary include of <linux/pci-aspm.h> PCI/ASPM: Convert to use sysfs_match_string() helper
2018-08-10PCI: Check for PCIe Link downtrainingAlexandru Gagniuc1-7/+20
When both ends of a PCIe Link are capable of a higher bandwidth than is currently in use, the Link is said to be "downtrained". A downtrained Link may indicate hardware or configuration problems in the system, but it's hard to identify such Links from userspace. Refactor pcie_print_link_status() so it continues to always print PCIe bandwidth information, as several NIC drivers desire. Add a new internal __pcie_print_link_status() to emit a message only when a device's bandwidth is constrained by the fabric and call it from the PCI core for all devices, which identifies all downtrained Links. It also emits messages for a few cases that are technically not downtrained, such as a x4 device in an open-ended x1 slot. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: changelog, move __pcie_print_link_status() declaration to drivers/pci/, rename pcie_check_upstream_link() to pcie_report_downtraining()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Add device-specific ACS Redirect disable infrastructureLogan Gunthorpe1-0/+3
Intel Sunrise Point (SPT) PCH hardware has an implementation of the ACS bits that does not comply with the PCIe standard. To deal with this we need device-specific quirks to disable ACS redirection. Add a new pci_dev_specific_disable_acs_redir() quirk and a new .disable_acs_redir() function pointer for use by non-compliant devices. No functional change intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split to separate patch, move pci_dev_specific_disable_acs_redir() declarations to drivers/pci/pci.h] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-09PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer supportLogan Gunthorpe1-2/+71
To support peer-to-peer traffic on a segment of the PCI hierarchy, we must disable the ACS redirect bits for select PCI bridges. The bridges must be selected before the devices are discovered by the kernel and the IOMMU groups created. Therefore, add a kernel command line parameter to specify devices which must have their ACS bits disabled. The new parameter takes a list of devices separated by a semicolon. Each device specified will have its ACS redirect bits disabled. This is similar to the existing 'resource_alignment' parameter. The ACS Request P2P Request Redirect, P2P Completion Redirect and P2P Egress Control bits are disabled, which is sufficient to always allow passing P2P traffic uninterrupted. The bits are set after the kernel (optionally) enables the ACS bits itself. It is also done regardless of whether the kernel or platform firmware sets the bits. If the user tries to disable the ACS redirect for a device without the ACS capability, print a warning to dmesg. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: reorder to add the generic code first and move the device-specific quirk to subsequent patches] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Allow specifying devices using a base bus and path of devfnsLogan Gunthorpe1-21/+97
When specifying PCI devices on the kernel command line using a bus/device/function address, bus numbers can change when adding or replacing a device, changing motherboard firmware, or applying kernel parameters like "pci=assign-buses". When bus numbers change, it's likely the command line tweak will be applied to the wrong device. Therefore, it is useful to be able to specify devices with a base bus number and the path of devfns needed to get to it, similar to the "device scope" structure in the Intel VT-d spec, Section 8.3.1. Thus, we add an option to specify devices in the following format: [<domain>:]<bus>:<device>.<func>[/<device>.<func>]* The path can be any segment within the PCI hierarchy of any length and determined through the use of 'lspci -t'. When specified this way, it is less likely that a renumbered bus will result in a valid device specification and the tweak won't be applied to the wrong device. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: use "device" instead of "slot" in documentation since that's the usual language in the PCI specs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Make specifying PCI devices in kernel parameters reusableLogan Gunthorpe1-54/+103
Separate out the code to match a PCI device with a string (typically originating from a kernel parameter) from the pci_specified_resource_alignment() function into its own helper function. While we are at it, this change fixes the kernel style of the function (fixing a number of long lines and extra parentheses). Additionally, make the analogous change to the kernel parameter documentation: Separate the description of how to specify a PCI device into its own section at the head of the "pci=" parameter. This patch should have no functional alterations. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: use "device" instead of "slot" in documentation since that's the usual language in the PCI specs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Christian König <christian.koenig@amd.com>
2018-08-09PCI: Export pcie_has_flr()Alex Williamson1-1/+2
pcie_flr() suggests pcie_has_flr() to ensure that PCIe FLR support is present prior to calling. pcie_flr() is exported while pcie_has_flr() is not. Resolve this. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-06PCI: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas1-1/+0
Several PCI core files include pci-aspm.h even though they don't need anything provided by that file. Remove the unnecessary includes of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-07-31PCI: Whitelist Thunderbolt ports for runtime D3Lukas Wunner1-1/+5
Thunderbolt controllers can be runtime suspended to D3cold to save ~1.5W. This requires that runtime D3 is allowed on its PCIe ports, so whitelist them. The 2015 BIOS cutoff that we've instituted for runtime D3 on PCIe ports is unnecessary on Thunderbolt because we know that even the oldest controller, Light Ridge (2010), is able to suspend its ports to D3 just fine -- specifically including its hotplug ports. And the power saving should be afforded to machines even if their BIOS predates 2015. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Andreas Noever <andreas.noever@gmail.com>
2018-07-31PCI: Whitelist native hotplug ports for runtime D3Lukas Wunner1-5/+10
Previously we blacklisted PCIe hotplug ports for runtime D3 because: (a) Ports handled by the firmware must not be transitioned to D3 by the OS behind the firmware's back: https://bugzilla.kernel.org/show_bug.cgi?id=53811 (b) Ports handled natively by the OS lacked runtime D3 support in the pciehp driver. We've just rectified the latter, so allow users to manually enable and test it by passing pcie_port_pm=force on the command line. Vendors are thus put in a position to validate hotplug ports for runtime D3 and perhaps we can someday enable it by default, but with a BIOS cutoff date. Ashok Raj tested runtime D3 on hotplug ports of a SkyLake Xeon-SP in 2017 and encountered Hardware Error NMIs, so this feature clearly cannot be enabled for everyone yet: https://lkml.kernel.org/r/20170503180426.GA4058@otc-nc-03 While at it, remove an erroneous code comment I added with 97a90aee5dab ("PCI: Consolidate conditions to allow runtime PM on PCIe ports") which claims that parents of a hotplug port must stay awake lest interrupts cannot be delivered. That has turned out to be wrong at least for Thunderbolt hotplug ports. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Yinghai Lu <yinghai@kernel.org>
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie1-0/+38
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-19PCI: Rename pci_try_reset_bus() to pci_reset_bus()Sinan Kaya1-8/+8
Now that the old implementation of pci_reset_bus() is gone, replace pci_try_reset_bus() with pci_reset_bus(). Compared to the old implementation, new code will fail immmediately with -EAGAIN if object lock cannot be obtained. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19PCI: Deprecate pci_reset_bus() and pci_reset_slot() functionsSinan Kaya1-52/+1
pci_reset_bus() and pci_reset_slot() functions are not being used by any code. Remove them from the kernel in favor of pci_try_reset_bus() and pci_try_reset_slot() functions. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19PCI: Unify try slot and bus reset APISinan Kaya1-5/+16
Drivers are expected to call pci_try_reset_slot() or pci_try_reset_bus() by querying if a system supports hotplug or not. A survey showed that most drivers don't do this and we are leaking hotplug capability to the user. Hide pci_try_slot_reset() from drivers and embed into pci_try_bus_reset(). Change pci_try_reset_bus() parameter from struct pci_bus to struct pci_dev. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19PCI: Hide pci_reset_bridge_secondary_bus() from driversSinan Kaya1-6/+5
Rename pci_reset_bridge_secondary_bus() to pci_bridge_secondary_bus_reset() and move the declaration from linux/pci.h to drivers/pci.h to be used internally in PCI directory only. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19PCI: Handle error return from pci_reset_bridge_secondary_bus()Sinan Kaya1-6/+6
Commit 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") added a return value to the function to return if a device is accessible following a reset. Callers are not checking the value. Pass error code up high in the stack if device is not accessible. Fixes: 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-18PCI: OF: Fix I/O space page leakSergei Shtylyov1-0/+38
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthroughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-05PCI: Export pcie_get_speed_cap and pcie_get_width_capAlex Deucher1-0/+2
So drivers can use them. This can be used to replace duplicate code in the drm subsystem. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-30PCI: Expand documentation for pci_add_dma_alias()Logan Gunthorpe1-2/+13
Seeing there's been some confusion about the use of pci_add_dma_alias(), expand the comment to describe why it must be called early and how early it must be called. Also, expand on the purpose of this function and common reasons it would be used. [The comment was reworded to some extent by Alex Williamson] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Doug Meyer <dmeyer@gigaio.com>
2018-06-29PCI: Make early dump functionality genericSinan Kaya1-0/+5
Move early dump functionality into common code so that it is available for all architectures. No need to carry arch-specific reads around as the read hooks are already initialized by the time pci_setup_device() is getting called during scan. Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-06-29PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handlingChristian König1-3/+3
Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling. That was hard coded instead of properly defined in the header for some reason. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29PCI: Restore resized BAR state on resumeChristian König1-0/+28
Resize BARs after resume to the expected size again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199959 Fixes: d6895ad39f3b ("drm/amdgpu: resize VRAM BAR for CPU access v6") Fixes: 276b738deb5b ("PCI: Add resizable BAR infrastructure") Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.15+
2018-06-07Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-47/+42
Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-06Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+11
- add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) * pci/virtualization: PCI/IOV: Allow PF drivers to limit total_VFs to 0 PCI: Add "pci=noats" boot parameter PCI: Add ACS quirk for Intel 300 series PCI: Add ACS quirk for Intel 7th & 8th Gen mobile nvme-pci: Use pci_sriov_configure_simple() to enable VFs net: ena: Use pci_sriov_configure_simple() to enable VFs PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs PCI/IOV: Add pci_sriov_configure_simple()
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.