aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-05PCI: Constify pci_dev_type structureBhumika Goyal1-1/+1
Make this const as it not modified in the file referencing it. It is only stored in a const field 'type' of a device structure. Also, add const to the variable declaration in the header file. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-31PCI: Mark Broadcom HT2100 Root Port Extended Tags as brokenSinan Kaya1-0/+1
Per PCIe r3.1, sec 2.2.6.2 and 7.8.4, a Requester may not use 8-bit Tags unless its Extended Tag Field Enable is set, but all Receivers/Completers must handle 8-bit Tags correctly regardless of their Extended Tag Field Enable. Some devices do not handle 8-bit Tags as Completers, so add a quirk for them. If we find such a device, we disable Extended Tags for the entire hierarchy to make peer-to-peer DMA possible. The Broadcom HT2100 seems to have issues with handling 8-bit tags. Mark it as broken. The pci_walk_bus() in the quirk handles devices we've enumerated in the past, and pci_configure_device() handles devices we enumerate in the future. Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1467674 Reported-and-tested-by: Wim ten Have <wim.ten.have@oracle.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: changelog, tweak messages, rename bit and quirk] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-14Merge branch 'pm-pci'Rafael J. Wysocki1-0/+1
* pm-pci: PCI / PM: Fix native PME handling during system suspend/resume PCI / PM: Restore PME Enable after config space restoration
2017-07-12PCI / PM: Restore PME Enable after config space restorationRafael J. Wysocki1-0/+1
Commit dc15e71eefc7 (PCI / PM: Restore PME Enable if skipping wakeup setup) introduced a mechanism by which the PME Enable bit can be restored by pci_enable_wake() if dev->wakeup_prepared is set in case it has been overwritten by PCI config space restoration. However, that commit overlooked the fact that on some systems (Dell XPS13 9360 in particular) the AML handling wakeup events checks PME Status and PME Enable and it won't trigger a Notify() for devices where those bits are not set while it is running. That happens during resume from suspend-to-idle when pci_restore_state() invoked by pci_pm_default_resume_early() clears PME Enable before the wakeup events are processed by AML, effectively causing those wakeup events to be ignored. Fix this issue by restoring the PME Enable configuration right after pci_restore_state() has been called instead of doing that in pci_enable_wake(). Fixes: dc15e71eefc7 (PCI / PM: Restore PME Enable if skipping wakeup setup) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-08Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+0
Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2017-06-28PCI / PM: Simplify device wakeup settings codeRafael J. Wysocki1-7/+2
After previous changes it is not necessary to distinguish between device wakeup for run time and device wakeup from system sleep states any more, so rework the PCI device wakeup settings code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-14PCI: Protect pci_driver->sriov_configure() usage with device_lock()Jakub Kicinski1-1/+0
Every method in struct device_driver or structures derived from it like struct pci_driver MUST provide exclusion vs the driver's ->remove() method, usually by using device_lock(). Protect use of pci_driver->sriov_configure() by holding the device lock while calling it. The PCI core sets the pci_dev->driver pointer in local_pci_probe() before calling ->probe() and only clears it after ->remove(). This means driver's ->sriov_configure() callback will happily race with probe() and remove(), most likely leading to BUGs, since drivers don't expect this. Remove the iov lock completely, since we remove the last user. [bhelgaas: changelog, thanks to Christoph for locking rule] Link: http://lkml.kernel.org/r/20170522225023.14010-1-jakub.kicinski@netronome.com Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-05-08Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-2/+17
Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-28Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+1
* pci/virtualization: ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: Call pcie_flr() from reset_chelsio_generic_dev() PCI: Call pcie_flr() from reset_intel_82599_sfp_virtfn() PCI: Export pcie_flr() PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding PCI: Avoid FLR for Intel 82579 NICs Conflicts: include/linux/pci.h
2017-04-28Merge branch 'pci/resource-mmap' into nextBjorn Helgaas1-2/+2
* pci/resource-mmap: ia64: Use generic pci_mmap_resource_range() ia64: Remove redundant checks for WC in pci_mmap_page_range() ia64: Remove redundant valid_mmap_phys_addr_range() from pci_mmap_page_range() PCI: Add I/O BAR support to generic pci_mmap_resource_range() x86/PCI: Use generic pci_mmap_resource_range() unicore32/PCI: Use generic pci_mmap_resource_range() sh/PCI: Use generic pci_mmap_resource_range() parisc: Use generic pci_mmap_resource_range() mn10300/PCI: Use generic pci_mmap_resource_range() MIPS: PCI: Use generic pci_mmap_resource_range() cris/PCI: Use generic pci_mmap_resource_range() ARM/PCI: Use generic pci_mmap_resource_range() PCI: Add pci_mmap_resource_range() and use it for ARM64 PCI: Add BAR index argument to pci_mmap_page_range() PCI: Use BAR index in sysfs attr->private instead of resource pointer PCI: Add arch_can_pci_mmap_io() on architectures which can mmap() I/O space PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h> PCI: Add arch_can_pci_mmap_wc() macro xtensa/PCI: Do not mmap PCI BARs to userspace as write-through PCI: Only allow WC mmap on prefetchable resources PCI: Fix another sanity check bug in /proc/pci mmap PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
2017-04-20PCI: Add sysfs sriov_drivers_autoprobe to control VF driver bindingBodong Wang1-0/+1
Sometimes it is not desirable to bind SR-IOV VFs to drivers. This can save host side resource usage by VF instances that will be assigned to VMs. Add a new PCI sysfs interface "sriov_drivers_autoprobe" to control that from the PF. To modify it, echo 0/n/N (disable probe) or 1/y/Y (enable probe) to: /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe Note that this must be done before enabling VFs. The change will not take effect if VFs are already enabled. Simply, one can disable VFs by setting sriov_numvfs to 0, choose whether to probe or not, and then re-enable the VFs by restoring sriov_numvfs. [bhelgaas: changelog, ABI doc] Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-04-20PCI: Add pci_mmap_resource_range() and use it for ARM64David Woodhouse1-2/+2
Starting to leave behind the legacy of the pci_mmap_page_range() interface which takes "user-visible" BAR addresses. This takes just the resource and offset. For now, both APIs coexist and depending on the platform, one is implemented as a wrapper around the other. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-30PCI: Recognize Thunderbolt devicesLukas Wunner1-0/+2
Detect on probe whether a PCI device is part of a Thunderbolt controller. Intel uses a Vendor-Specific Extended Capability (VSEC) with ID 0x1234 on such devices. Detect presence of this VSEC and cache it in a newly added is_thunderbolt bit in struct pci_dev. Also, add a helper to check whether a given PCI device is situated on a Thunderbolt daisy chain (i.e., below a PCI device with is_thunderbolt set). The necessity arises from the following: * If an external Thunderbolt GPU is connected to a dual GPU laptop, that GPU is currently registered with vga_switcheroo even though it can neither drive the laptop's panel nor be powered off by the platform. To vga_switcheroo it will appear as if two discrete GPUs are present. As a result, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU which may not be runtime suspended at all at this moment. The solution is to not register external GPUs with vga_switcheroo, which necessitates a way to recognize if they're on a Thunderbolt daisy chain. * Dual GPU MacBook Pros introduced 2011+ can no longer switch external DisplayPort ports between GPUs. (They're no longer just used for DP but have become combined DP/Thunderbolt ports.) The driver to switch the ports, drivers/platform/x86/apple-gmux.c, needs to detect presence of a Thunderbolt controller and, if found, keep external ports permanently switched to the discrete GPU. v2: Make kerneldoc for pci_is_thunderbolt_attached() more precise, drop portion of commit message pertaining to separate series. (Bjorn Helgaas) Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Amir Levy <amir.jer.levy@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: http://patchwork.freedesktop.org/patch/msgid/0ab165a4a35c0b60f29d4c306c653ead14fcd8f9.1489145162.git.lukas@wunner.de
2017-03-29PCI: Add device disconnected stateKeith Busch1-0/+14
Add a new state to pci_dev to be set when it is unexpectedly disconnected. The PCI driver tear down functions can observe this new device state so they may skip operations that will fail. The pciehp and pcie-dpc drivers are aware when the link is down, so these set the flag when their handlers detect the device is disconnected. Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-02-03PCI: Lock each enable/disable num_vfs operation in sysfsEmil Tantilov1-1/+1
Enabling/disabling SRIOV via sysfs by echo-ing multiple values simultaneously: # echo 63 > /sys/class/net/ethX/device/sriov_numvfs& # echo 63 > /sys/class/net/ethX/device/sriov_numvfs # sleep 5 # echo 0 > /sys/class/net/ethX/device/sriov_numvfs& # echo 0 > /sys/class/net/ethX/device/sriov_numvfs results in the following bug: kernel BUG at drivers/pci/iov.c:495! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 8050 Comm: bash Tainted: G W 4.9.0-rc7-net-next #2092 RIP: 0010:[<ffffffff813b1647>] [<ffffffff813b1647>] pci_iov_release+0x57/0x60 Call Trace: [<ffffffff81391726>] pci_release_dev+0x26/0x70 [<ffffffff8155be6e>] device_release+0x3e/0xb0 [<ffffffff81365ee7>] kobject_cleanup+0x67/0x180 [<ffffffff81365d9d>] kobject_put+0x2d/0x60 [<ffffffff8155bc27>] put_device+0x17/0x20 [<ffffffff8139c08a>] pci_dev_put+0x1a/0x20 [<ffffffff8139cb6b>] pci_get_dev_by_id+0x5b/0x90 [<ffffffff8139cca5>] pci_get_subsys+0x35/0x40 [<ffffffff8139ccc8>] pci_get_device+0x18/0x20 [<ffffffff8139ccfb>] pci_get_domain_bus_and_slot+0x2b/0x60 [<ffffffff813b09e7>] pci_iov_remove_virtfn+0x57/0x180 [<ffffffff813b0b95>] pci_disable_sriov+0x65/0x140 [<ffffffffa00a1af7>] ixgbe_disable_sriov+0xc7/0x1d0 [ixgbe] [<ffffffffa00a1e9d>] ixgbe_pci_sriov_configure+0x3d/0x170 [ixgbe] [<ffffffff8139d28c>] sriov_numvfs_store+0xdc/0x130 ... RIP [<ffffffff813b1647>] pci_iov_release+0x57/0x60 Use the existing mutex lock to protect each enable/disable operation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: Alexander Duyck <alexander.h.duyck@intel.com>
2016-12-12Merge branch 'pci/virtualization' into nextBjorn Helgaas1-6/+1
* pci/virtualization: PCI: Add comments about ROM BAR updating PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE PCI: Remove pci_resource_bar() and pci_iov_resource_bar() PCI: Don't update VF BARs while VF memory space is enabled PCI: Separate VF BAR updates from standard BAR updates PCI: Update BARs using property bits appropriate for type PCI: Ignore BAR updates on virtual functions PCI: Do any VF BAR updates before enabling the BARs PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+ PCI: Convert Mellanox broken INTx quirks to be for listed devices only PCI: Convert broken INTx masking quirks from HEADER to FINAL net/mlx4_core: Use device ID defines PCI: Add Mellanox device IDs
2016-12-12Merge branch 'pci/pm' into nextBjorn Helgaas1-2/+2
* pci/pm: x86/platform/intel-mid: Constify mid_pci_platform_pm PCI: pciehp: Add runtime PM support for PCIe hotplug ports ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit PCI: Unfold conditions to block runtime PM on PCIe ports PCI: Consolidate conditions to allow runtime PM on PCIe ports PCI: Activate runtime PM on a PCIe port only if it can suspend PCI: Speed up algorithm in pci_bridge_d3_update() PCI: Autosense device removal in pci_bridge_d3_update() PCI: Don't acquire ref on parent in pci_bridge_d3_update() USB: UHCI: report non-PME wakeup signalling for Intel hardware PCI: Check for PME in targeted sleep state
2016-12-12Merge branch 'pci/misc' into nextBjorn Helgaas1-3/+0
* pci/misc: PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h
2016-12-12PCI: Move config space size macros to pci_regs.hWang Sheng-Hui1-3/+0
Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to include/uapi/linux/pci_regs.h so they can be used by more drivers and eliminate duplicate definitions. [bhelgaas: Expand comment to include PCI-X details] Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platformDongdong Liu1-0/+5
The acpi_get_rc_resources() is used to get the RC register address that can not be described in MCFG. It takes the _HID & segment to look for and outputs the RC address resource. Use PNP0C02 devices to describe such RC address resource. Use _UID to match segment to tell which root bus the PNP0C02 resource belongs to. [bhelgaas: add dev argument, wrap in #ifdef CONFIG_PCI_QUIRKS] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-29PCI: Remove pci_resource_bar() and pci_iov_resource_bar()Bjorn Helgaas1-6/+0
pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Separate VF BAR updates from standard BAR updatesBjorn Helgaas1-0/+1
Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-17PCI: Activate runtime PM on a PCIe port only if it can suspendLukas Wunner1-0/+1
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even if it will never actually suspend because the BIOS is too old or the "pcie_port_pm=off" option was specified on the kernel command line. A few CPU cycles can be saved by not activating runtime PM at all in these cases, because rpm_idle() and rpm_suspend() will bail out right at the beginning when calling rpm_check_suspend_allowed(), instead of carrying out various locking and assignments, invoking rpm_callback(), getting back -EBUSY and rolling everything back. The conditions checked in pci_bridge_d3_possible() are all static, they never change during uptime of the system, hence it's safe to call this to determine if runtime PM should be activated. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17PCI: Autosense device removal in pci_bridge_d3_update()Lukas Wunner1-2/+1
The algorithm to update the flag indicating whether a bridge may go to D3 makes a few optimizations based on whether the update was caused by the removal of a device on the one hand, versus the addition of a device or the change of its D3cold flags on the other hand. The information whether the update pertains to a removal is currently passed in by the caller, but the function may as well determine that itself by examining the device in question, thereby allowing for a considerable simplification and reduction of the code. Out of several options to determine removal, I've chosen the function device_is_registered() because it's cheap: It merely returns the dev->kobj.state_in_sysfs flag. That flag is set through device_add() when the root bus is scanned and cleared through device_remove(). The call to pci_bridge_d3_update() happens after each of these calls, respectively, so the ordering is correct. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-03Merge branch 'pci/pm' into nextBjorn Helgaas1-0/+3
* pci/pm: PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM
2016-09-28PCI: Query platform firmware for device power stateLukas Wunner1-0/+3
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-15PCI: Add Precision Time Measurement (PTM) supportJonathan Yong1-0/+6
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22). Enable PTM on PTM Root devices and switch ports. This does not enable PTM on endpoints. There currently are no PTM-capable devices on the market, but it is expected to be supported by the Intel Apollo Lake platform. [bhelgaas: complete rework] Signed-off-by: Jonathan Yong <jonathan.yong@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-13PCI: Put PCIe ports into D3 during suspendMika Westerberg1-0/+11
Currently the Linux PCI core does not touch power state of PCI bridges and PCIe ports when system suspend is entered. Leaving them in D0 consumes power unnecessarily and may prevent the CPU from entering deeper C-states. With recent PCIe hardware we can power down the ports to save power given that we take into account few restrictions: - The PCIe port hardware is recent enough, starting from 2015. - Devices connected to PCIe ports are effectively in D3cold once the port is transitioned to D3 (the config space is not accessible anymore and the link may be powered down). - Devices behind the PCIe port need to be allowed to transition to D3cold and back. There is a way both drivers and userspace can forbid this. - If the device behind the PCIe port is capable of waking the system it needs to be able to do so from D3cold. This patch adds a new flag to struct pci_device called 'bridge_d3'. This flag is set and cleared by the PCI core whenever there is a change in power management state of any of the devices behind the PCIe port. When system later on is suspended we only need to check this flag and if it is true transition the port to D3 otherwise we leave it in D0. Also provide override mechanism via command line parameter "pcie_port_pm=[off|force]" that can be used to disable or enable the feature regardless of the BIOS manufacturing date. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-15PCI: Add pci_set_vpd_size() to set VPD sizeHariprasad Shenai1-0/+1
After 104daa71b396 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. We don't attempt to read past that valid size because that causes some devices to crash. However, some devices do have data past that valid size. For example, Chelsio adapters contain two VPD structures, and the driver needs both of them. Add pci_set_vpd_size(). If a driver knows it is safe to read past the end of the VPD data structure at offset 0, it can use pci_set_vpd_size() to allow access to as much data as it needs. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa71b396 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-29PCI: Fold struct pci_vpd_pci22 into struct pci_vpdBjorn Helgaas1-1/+6
We only support one flavor of VPD, so there's no need to complicate things by having a "generic" struct pci_vpd and a more specific struct pci_vpd_pci22. Fold struct pci_vpd_pci22 directly into struct pci_vpd. [bhelgaas: remove NULL check before kfree of dev->vpd (per kfreeaddr.cocci)] Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Rename VPD symbols to remove unnecessary "pci22"Bjorn Helgaas1-1/+1
There's only one kind of VPD, so we don't need to qualify it as "the version described by PCI spec rev 2.2." Rename the following symbols to remove unnecessary "pci22": PCI_VPD_PCI22_SIZE -> PCI_VPD_MAX_SIZE pci_vpd_pci22_size() -> pci_vpd_size() pci_vpd_pci22_wait() -> pci_vpd_wait() pci_vpd_pci22_read() -> pci_vpd_read() pci_vpd_pci22_write() -> pci_vpd_write() pci_vpd_pci22_ops -> pci_vpd_ops pci_vpd_pci22_init() -> pci_vpd_init() Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Remove struct pci_vpd_ops.release function pointerBjorn Helgaas1-1/+0
The struct pci_vpd_ops.release function pointer is always pci_vpd_pci22_release(), so there's no need for the flexibility of a function pointer. Inline the pci_vpd_pci22_release() body into pci_vpd_release() and remove pci_vpd_pci22_release() and the struct pci_vpd_ops.release function pointer. Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Move pci_vpd_release() from header file to pci/access.cBjorn Helgaas1-5/+1
Move pci_vpd_release() so it's next to the other VPD functions. This puts it next to pci_vpd_pci22_init(), which allocates the space freed by pci_vpd_release(). Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-01-21Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-2/+0
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2015-12-09PCI / PM: constify pci_platform_pm_ops structureJulia Lawall1-1/+1
The pci_platform_pm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30PCI/MSI: Remove empty pci_msi_init_pci_dev()Bjorn Helgaas1-2/+0
4a7cc8316705 ("genirq/MSI: Move msi_list from struct pci_dev to struct device") removed the contents of pci_msi_init_pci_dev(). All implementation of it are now empty, so remove it completely. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-25ARM/PCI: Move align_resource function pointer to pci_host_bridge structureGabriele Paoloni1-2/+0
Commit b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer") introduced an ARM-specific align_resource() function pointer. This is not portable to other arches and doesn't work for platforms with two different PCIe host bridge controllers. Move the function pointer to the pci_host_bridge structure so each host bridge driver can specify its own align_resource() function. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-06Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-0/+1
Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-10-29PCI: Add support for Enhanced Allocation devicesSean O. Stalley1-0/+1
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-12PCI / PM: Avoid resuming more devices during system suspendRafael J. Wysocki1-0/+1
Commit bac2a909a096 (PCI / PM: Avoid resuming PCI devices during system suspend) introduced a mechanism by which some PCI devices that were runtime-suspended at the system suspend time might be left in that state for the duration of the system suspend-resume cycle. However, it overlooked devices that were marked as capable of waking up the system just because PME support was detected in their PCI config space. Namely, in that case, device_can_wakeup(dev) returns 'true' for the device and if the device is not configured for system wakeup, device_may_wakeup(dev) returns 'false' and it will be resumed during system suspend even though configuring it for system wakeup may not really make sense at all. To avoid this problem, simply disable PME for PCI devices that have not been configured for system wakeup and are runtime-suspended at the system suspend time for the duration of the suspend-resume cycle. If the device is in D3cold, its config space is not available and it shouldn't be written to, but that's only possible if the device has platform PM support and the platform code is responsible for checking whether or not the device's configuration is suitable for system suspend in that case. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-14PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirksWei Yang1-0/+2
Some quirks search for a HyperTransport capability and use a hard-coded TTL value of 48 to avoid an infinite loop. Move the definition of PCI_FIND_CAP_TTL to pci.h and use it instead of the hard-coded TTL values. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-12Merge branches 'pci/aspm', 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/resource' and 'pci/virtualization' into nextBjorn Helgaas1-11/+21
* pci/aspm: PCI/ASPM: Simplify Clock Power Management setting PCI: Use dev->has_secondary_link to find downstream PCIe links PCI/ASPM: Use dev->has_secondary_link to find downstream links PCI: Add dev->has_secondary_link to track downstream PCIe links PCI/ASPM: Remove redundant PCIe port type checking PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter * pci/enumeration: PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: designware: Use pci_scan_root_bus() for simplicity PCI: tegra: Remove tegra_pcie_scan_bus() PCI: mvebu: Remove mvebu_pcie_scan_bus() * pci/hotplug: PCI: pciehp: Wait for hotplug command completion where necessary PCI: Propagate the "ignore hotplug" setting to parent ACPI / hotplug / PCI: Check ignore_hotplug for all downstream devices PCI: pciehp: Drop pointless label from pciehp_probe() PCI: pciehp: Drop pointless ACPI-based "slot detection" check * pci/misc: PCI: Remove unused pci_dma_burst_advice() PCI: Remove unused pcibios_select_root() (again) PCI: Remove unnecessary #includes of <asm/pci.h> PCI: Include <linux/pci.h>, not <asm/pci.h> * pci/msi: PCI/MSI: Remove unused pci_msi_off() PCI/MSI: Drop pci_msi_off() calls from quirks ntb: Drop pci_msi_off() call during probe virtio_pci: drop pci_msi_off() call during probe PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() PCI/MSI: Rename msi_set_enable(), msix_clear_and_set_ctrl() * pci/resource: PCI: Add pci_bus_addr_t * pci/virtualization: ACPI / PCI: Account for ARI in _PRT lookups PCI: Move pci_ari_enabled() to global header PCI: Add function 1 DMA alias quirk for Marvell 9120 PCI: Add ACS quirks for Intel 9-series PCH root ports
2015-05-29PCI: Move pci_ari_enabled() to global headerAlex Williamson1-11/+0
pci_ari_enabled() is useful outside of drivers/pci, particularly for deriving INTx routing via ACPI _PRT, so move it to the global header. Also convert to bool return. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-07PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl()Michael S. Tsirkin1-0/+21
Move pci_msi_set_enable() and pci_msix_clear_and_set_ctrl() to drivers/pci/pci.h so they're available even when MSI isn't configured into the kernel. No functional change. [bhelgaas: changelog, split into separate patch] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2015-04-16Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds1-0/+2
Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-08PCI: Export pci_find_host_bridge() for use inside PCI coreAaron Lu1-0/+2
The find_pci_host_bridge() function can be useful to other PCI code so export it. Change its name to pci_find_host_bridge(). Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-31PCI: Calculate maximum number of buses required for VFsWei Yang1-0/+1
An SR-IOV device can change its First VF Offset and VF Stride based on the values of ARI Capable Hierarchy and NumVFs. The number of buses required for all VFs is determined by NumVFs, First VF Offset, and VF Stride (see SR-IOV spec r1.1, sec 2.1.2). Previously pci_iov_bus_range() computed how many buses would be required by TotalVFs, but this was based on a single NumVFs value and may not have been the maximum for all NumVFs configurations. Iterate over all valid NumVFs and calculate the maximum number of bus numbers that could ever be required for VFs of this device. [bhelgaas: changelog, compute busnr of NumVFs, not TotalVFs, remove kerenl-doc comment marker] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Keep individual VF BAR size in struct pci_sriovWei Yang1-0/+1
Currently we don't store the individual VF BAR size. We calculate it when needed by dividing the PF's IOV resource size (which contains space for *all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability again. Keep the individual VF BAR size in struct pci_sriov.barsz[], add pci_iov_resource_size() to retrieve it, and use that instead of doing the division or reading the SR-IOV capability BAR. [bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove SR-IOV capability BAR sizing] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-02-10Merge branches 'pm-pci' and 'pm-cpuidle'Rafael J. Wysocki1-0/+6
* pm-pci: PCI / PM: Avoid resuming PCI devices during system suspend * pm-cpuidle: drivers: cpuidle: Don't initialize big.LITTLE driver if MCPM is unavailable
2015-01-23PCI / PM: Avoid resuming PCI devices during system suspendRafael J. Wysocki1-0/+6
Commit f25c0ae2b4c4 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend) modified the ACPI PM domain's system suspend callbacks to allow devices attached to it to be left in the runtime-suspended state during system suspend so as to optimize the suspend process. This was based on the general mechanism introduced by commit aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily). Extend that approach to PCI devices by modifying the PCI bus type's ->prepare callback to return 1 for devices that are runtime-suspended when it is being executed and that are in a suitable power state and need not be resumed going forward. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.