aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-05-28Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds3-4/+98
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-19ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setupHuang Ying3-4/+98
Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-11PCI: aerdrv: trivial cleanup for aerdrv_core.cHidetoshi Seto1-11/+10
Style cleanup for pci_{en,dis}able_pcie_error_reporting(). Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: trivial cleanup for aerdrv.cHidetoshi Seto1-14/+10
Skip zero-ing in aer_alloc_rpc() since it is allocated by kzalloc(). The closing comment marker "*/" is recommended for kernel-doc comments. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: introduce default_downstream_reset_linkHidetoshi Seto3-39/+63
I noticed that when I inject a fatal error to an endpoint via aer-inject, aer_root_reset() is called as reset_link for a downstream port at upstream of the endpoint: pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401 : pcieport 0000:52:02.0: Root Port link has been reset It externally appears to be working, but internally issues some accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for root port so not available on downstream port. This patch introduces default_downstream_reset_link that is a version of aer_root_reset() with no accesses to root port's register. It is used for downstream ports that has no reset_link function its specific. This patch also updates related description in pcieaer-howto.txt. Some minor fixes are included. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework find_aer_serviceHidetoshi Seto1-21/+16
The structure find_aer_service_data is no longer useful. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove is_downstreamHidetoshi Seto1-21/+12
The pcie->port of port service device points the port associated the service with. The find_aer_service iterates over children of given port udev. So it is clear that the pcie->port of port service of given port udev must always point the udev. Therefore we can know the type of udev without checking its children. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKSHidetoshi Seto2-4/+1
Make it clear that we only interest in 2 *_RCV bits. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRCHidetoshi Seto2-2/+2
The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework do_recoveryHidetoshi Seto1-21/+17
Move dev_printks for debug into do_recovery(). This allows do_recovery() to return void. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework get_e_source()Hidetoshi Seto1-32/+31
Current get_e_source() returns pointer to an element of array. However since it also progress consume counter, it is possible that the element is overwritten by newly produced data before the element is really consumed. This patch changes get_e_source() to copy contents of the element to address pointed by its caller. Once copied the element in array can be consumed. And relocate this function to more innocuous place. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework aer_isr_one_error()Hidetoshi Seto1-21/+36
Divide tricky for-loop into readable if-blocks. The logic to set multi_error_valid (to force walking pci bus hierarchy to find 2nd~ error devices) is changed too, to check MULTI_{,_UN}COR_RCV bit individually and to force walk only when it is required. And rework setting e_info->severity for uncorrectable, not to use magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework add_error_deviceHidetoshi Seto1-5/+13
Stop iteration if we cannot register any more. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: remove compare_device_idHidetoshi Seto1-16/+2
Inline too-simple subroutine only used here. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: introduce is_error_sourceHidetoshi Seto1-40/+34
Take core part of find_device_iter() to make a new function is_error_source() that checks given device has report an error or not. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: rework find_source_deviceHidetoshi Seto1-12/+16
Return bool to indicate that the source device is found or not. This allows us to skip calling aer_process_err_devices() if we can. And move dev_printk for debug into this function. v2: return bool instead of int Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: make aer_{en,dis}able_rootport staticHidetoshi Seto3-109/+107
These functions are only called from init/remove path of aerdrv, so move them from aerdrv_core.c to aerdrv.c, to make them static. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: cleanup inconsistent functionsHidetoshi Seto3-18/+5
This cleanup solves some minor naming issues by removing unuseful function aer_delete_rootport() and by renaming disable_root_aer() to aer_disable_rootport(). - Inconsistent location of alloc & free: The struct rpc is allocated in aer_alloc_rpc() at aerdrv.c while it is implicitly freed in aer_delete_rootport() at aerdrv_core.c. - Inconsistent function name: It makes a bit confusion that aer_delete_rootport() is seemed to be paired with aer_enable_rootport(), i.e. there is neither "add" against "delete" nor "disable" against "enable". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11PCI: aerdrv: RsvdP of PCI_ERR_ROOT_COMMANDHidetoshi Seto2-11/+17
Handle preserved bits properly. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-08PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_resetAlexander Duyck1-2/+8
While testing completion timeouts I found that hardware was not recovering. It looks like the hot reset was never being propagated to the endpoint devices on the bus due to the fact that we were clearing the bit too quickly. The documentation I have states that we should be transmitting hot reset TS1s for 2ms. To achieve this I have added a 2ms delay from the time we set the secondary bus reset bit to the time we clear it. In addition I changed the define used for the secondary bus reset bit to match the register define that was being used. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo5-1/+4
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26PM: Allow PCI devices to suspend/resume asynchronouslyRafael J. Wysocki1-0/+1
Set power.async_suspend for all PCI devices and PCIe port services, so that they can be suspended and resumed in parallel with other devices they don't depend on in a known way (i.e. devices which are not their parents or children). This only affects the "regular" suspend and resume stages, which means in particular that the restoration of the PCI devices' standard configuration registers during resume will still be carried out synchronously (at the "early" resume stage). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-22PCIe PME: use pci_pcie_cap()Kenji Kaneshige1-4/+4
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset. This reduces redundant search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22PCIe PME: use pci_is_pcie()Kenji Kaneshige1-3/+3
Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22PCI PM: Make it possible to force using INTx for PCIe PME signalingRafael J. Wysocki4-3/+67
Apparently, some machines may have problems with PCI run-time power management if MSIs are used for the native PCIe PME signaling. In particular, on the MSI Wind U-100 PCIe PME interrupts are not generated by a PCIe root port after a resume from suspend to RAM, if the system wake-up was triggered by a PME from the device attached to this port. [It doesn't help to free the interrupt on suspend and request it back on resume, even if that is done along with disabling the MSI and re-enabling it, respectively.] However, if INTx interrupts are used for this purpose on the same machine, everything works just fine. For this reason, add a kernel command line switch allowing one to request that MSIs be not used for the native PCIe PME signaling, introduce a DMI table allowing us to blacklist machines that need this switch to be set by default and put the MSI Wind U-100 into this table. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22PCI PM: PCIe PME root port service driverRafael J. Wysocki6-0/+589
PCIe native PME detection mechanism is based on interrupts generated by root ports or event collectors every time a PCIe device sends a PME message upstream. Once a PME message has been sent by an endpoint device and received by its root port (or event collector in the case of root complex integrated endpoints), the Requester ID from the message header is registered in the root port's Root Status register. At the same time, the PME Status bit of the Root Status register is set to indicate that there's a PME to handle. If PCIe PME interrupt is enabled for the root port, it generates an interrupt once the PME Status has been set. After receiving the interrupt, the kernel can identify the PCIe device that generated the PME using the Requester ID from the root port's Root Status register. [For details, see PCI Express Base Specification, Rev. 2.0.] Implement a driver for the PCIe PME root port service working in accordance with the above description. Based on a patch from Shaohua Li <shaohua.li@intel.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-25PCI: fix nested spinlock hang in aer_injectAndrew Patterson1-6/+6
The aer_inject module hangs in aer_inject() when checking the device's error masks. The hang is due to a recursive use of the aer_inject lock. The aer_inject() routine grabs the lock while processing the error and then calls pci_read_config_dword to read the masks. The pci_read_config_dword routine is earlier overridden by pci_read_aer, which among other things, grabs the aer_inject lock. Fixed by moving the pci_read_config_dword calls to read the masks to before the lock is taken. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCIe AER: prevent AER injection if hardware masks error reportingYouquan,Song1-1/+19
The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER driver which will controls the reporting of individual errors to PCIe RC via PCIe error messages. If hardware masks special error reporting to RC, the aer_inject driver should not inject aer error. Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Youquan, Song <youquan.song@intel.com> Acked-by: Ying, Huang <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI: AER: fix aer inject result in kernel oopsYouquan,Song1-1/+7
If the BIOS does not export _OSC to allow OS take over the PCIe AER, the pcie aer driver will not initialize the aer service. However, the aer_inject driver does not check this scenario, which results in a kernel oops when injecting an aer error into OS. For example: BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 PGD 155c41067 PUD 157fe0067 PMD 0 Oops: 0002 [#1] SMP Pid: 5119, comm: aer-inject Not tainted 2.6.32-rc8-mce #2 RIP: 0010:[<ffffffff812e08f7>] [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 RSP: 0018:ffff880157f81e28 EFLAGS: 00010096 RAX: 0000000000000296 RBX: 0000000000000000 RCX: 0000000000000100 RDX: 0000000000010000 RSI: 0000000000000246 RDI: 0000000000000350 RBP: ffff880157f81e28 R08: 0000000000000004 R09: ffff880157f81dac R10: ffff88015a666f60 R11: ffff88015a666f40 R12: ffff88015758cc00 R13: 0000000000000350 R14: 0000000000000000 R15: 0000000000000100 FS: 00007f4d4a66e6f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000350 CR3: 000000015661a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process aer-inject (pid: 5119, threadinfo ffff880157f80000, task ffff8801585f4340) Stack: ffff880157f81e78 ffffffff811b1615 ffff880157f81e78 ffffffff81222823 Call Trace: [<ffffffff811b1615>] aer_irq+0x38/0x117 [<ffffffff81222823>] ? device_for_each_child+0x5f/0x6f [<ffffffffa00967bf>] aer_inject_write+0x409/0x45e [aer_inject] [<ffffffff810eb80e>] vfs_write+0xae/0x16a [<ffffffff810eb98e>] sys_write+0x47/0x6e [<ffffffff8100ba2b>] system_call_fastpath+0x16/0x1b RIP [<ffffffff812e08f7>] _spin_lock_irqsave+0xc/0x23 RSP <ffff880157f81e28> CR2: 0000000000000350 So check the _OSC before assuming that AER is available to the OS. Signed-off-by: Youquan, Song <youquan.song@intel.com> Acked-by: Ying, Huang <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-04PCI: pcie portdrv: style cleanupHidetoshi Seto2-18/+15
No change in logic. Before: drivers/pci/pcie/portdrv_core.c: total: 7 errors, 2 warnings, 508 lines checked drivers/pci/pcie/portdrv_pci.c: total: 4 errors, 2 warnings, 300 lines checked After: drivers/pci/pcie/portdrv_core.c: total: 0 errors, 0 warnings, 506 lines checked drivers/pci/pcie/portdrv_pci.c: total: 0 errors, 0 warnings, 299 lines checked Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: change PCI nomenclature in drivers/pci/ (non-comment changes)Stefan Assmann4-6/+6
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: change PCI nomenclature in drivers/pci/ (comment changes)Stefan Assmann5-9/+9
Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-04PCI: fix BUG_ON triggered by logical PCIe root port removalKenji Kaneshige1-2/+4
This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[<ffffffff811df69b>] [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [<ffffffff811dff52>] pcie_aspm_exit_link_state+0xf5/0x11e [<ffffffff811d7db2>] pci_stop_bus_device+0x76/0x7e [<ffffffff811d7d67>] pci_stop_bus_device+0x2b/0x7e [<ffffffff811d7e4f>] pci_remove_bus_device+0x15/0xb9 [<ffffffff811dcb8c>] remove_callback+0x29/0x3a [<ffffffff81135aeb>] sysfs_schedule_callback_work+0x15/0x6d [<ffffffff81072790>] worker_thread+0x19d/0x298 [<ffffffff8107273b>] ? worker_thread+0x148/0x298 [<ffffffff81135ad6>] ? sysfs_schedule_callback_work+0x0/0x6d [<ffffffff810765c0>] ? autoremove_wake_function+0x0/0x38 [<ffffffff810725f3>] ? worker_thread+0x0/0x298 [<ffffffff8107629e>] kthread+0x7d/0x85 [<ffffffff8102eafa>] child_rip+0xa/0x20 [<ffffffff8102e4bc>] ? restore_args+0x0/0x30 [<ffffffff81076221>] ? kthread+0x0/0x85 [<ffffffff8102eaf0>] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP <ffff88082a2f5ca0> ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang <achiang@hp.com> Tested-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: remove ifdefed pci_cleanup_aer_correct_error_statusAndrew Patterson1-17/+0
The pci_cleanup_aer_correct_error_status() function has been #if 0'd out since 2.6.25. Time to remove the dead code. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: unconditionally clear AER uncorr status register during cleanupAndrew Patterson1-7/+3
The current implementation of pci_cleanup_aer_uncorrect_error_status only clears either fatal or non-fatal error status bits depending on the state of the I/O channel. This implementation will then often leave some bits set after PCI error recovery completes. The uncleared bit settings will then be falsely reported the next time an AER interrupt is generated for that hierarchy. An easy way to illustrate this issue is to use the aer-inject module to simultaneously inject both an uncorrectable non-fatal and uncorrectable fatal error. One of the errors will not be cleared. This patch resolves this issue by unconditionally clearing all bits in the AER uncorrectable status register. All settings and corrective action strategies are saved and determined before pci_cleanup_aer_uncorrect_error_status is called, so this change should not affect errory handling functionality. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant definitionsKenji Kaneshige2-24/+9
Remove unnecessary definitions from portdrv.h and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove unnecessary struct pcie_port_dataKenji Kaneshige4-26/+9
Remove 'port_type' field in struct pcie_port_data(), because we can get port type information from struct pci_dev. With this change, this patch also does followings: - Remove struct pcie_port_data because it no longer has any field. - Remove portdrv private definitions about port type (PCIE_RC_PORT, PCIE_SW_UPSTREAM_PORT and PCIE_SW_DOWNSTREAM_PORT), and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: minor cleanup for pcie_port_device_registerKenji Kaneshige1-11/+10
Minor cleanups for pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: add missing irq cleanupKenji Kaneshige1-7/+12
Add missing service irqs cleanup in the error code path of pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: enable device before irq initializationKenji Kaneshige1-10/+11
Call pci_enable_device() before initializing service irqs, because legacy interrupt is initialized in pci_enable_device() on some architectures. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup service irqs initializationKenji Kaneshige1-42/+29
This patch cleans up the service irqs initialization as follows: - Remove 'irq_mode' field in pcie_port_data and related definitions, which is not needed because we can get the same information from 'is_msix', 'is_msi' and 'pin' fields in struct pci_dev. - Change the name of 'vectors' argument of assign_interrupt_mode() to 'irqs' because it holds irq numbers actually. People might confuse it with CPU vector or MSI/MSI-X vector. - Change function name assign_interrupt_mode() to init_service_irqs() becasuse we no longer have 'irq_mode' data structure, and new name is more straightforward (IMO). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: check capabilities firstKenji Kaneshige1-2/+4
Move capability check capability to the beginning of pcie_port_device_register() prevents redundant execution path. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: move PME capability checkKenji Kaneshige1-3/+3
No reason to check PME capability outside get_port_device_capability(). Do it in get_port_device_capability(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie type calculationKenji Kaneshige1-6/+2
PCIe port type is already stored in 'pcie_type' field of struct pci_dev. So we don't need to get it from pci configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup pcie_device registrationKenji Kaneshige1-51/+26
In the current port bus driver implementation, pcie_device allocation, initialization and registration are done in separated functions. Doing those in one function make the code simple and easier to read. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie_port_device_probeKenji Kaneshige3-29/+8
We don't need pcie_port_device_probe() because we can get pci device/port type using pci_is_pcie() and 'pcie_type' fields in struct pci_dev. Remove pcie_port_device_probe(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe AER: use pci_is_pcie()Kenji Kaneshige2-3/+3
Changes for PCIe AER driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe ASPM: use pci_is_pcie()Kenji Kaneshige1-9/+12
Change for PCIe ASPM driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe ASPM: use pci_pcie_cap()Kenji Kaneshige1-10/+10
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe ASPM driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.