aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-11Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"Bjorn Helgaas1-4/+4
This reverts commit 2a4d9408c9e8b6f6fc150c66f3fef755c9e20d4a. Robert reported a NULL pointer dereference caused by the PCI core (local_pci_probe()) calling the i2c_designware_pci driver's .runtime_resume() method before the .probe() method. i2c_dw_pci_resume() depends on initialization done by i2c_dw_pci_probe(). Prior to 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver"), pci_pm_runtime_resume() avoided calling the .runtime_resume() method because pci_dev->driver had not been set yet. 2a4d9408c9e8 and b5f9c644eb1b ("PCI: Remove struct pci_dev->driver"), removed pci_dev->driver, replacing it by device->driver, which *has* been set by this time, so pci_pm_runtime_resume() called the .runtime_resume() method when it previously had not. Fixes: 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver") Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/ Reported-by: Robert Święcki <robert@swiecki.net> Tested-by: Robert Święcki <robert@swiecki.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-1/+1
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05Merge branch 'pci/sysfs'Bjorn Helgaas1-2/+2
- Check for CAP_SYS_ADMIN before validating sysfs user input, not after (Krzysztof Wilczyński) - Always return -EINVAL from sysfs "store" functions for invalid user input instead of -EINVAL sometimes and -ERANGE others (Krzysztof Wilczyński) - Use kstrtobool() directly instead of the strtobool() wrapper (Krzysztof Wilczyński) * pci/sysfs: PCI: Use kstrtobool() directly, sans strtobool() wrapper PCI/sysfs: Return -EINVAL consistently from "store" functions PCI/sysfs: Check CAP_SYS_ADMIN before parsing user input # Conflicts: # drivers/pci/iov.c
2021-11-05Merge branch 'pci/portdrv'Bjorn Helgaas1-17/+30
- Don't setup portdrv IRQs if there are no port drivers that use them, to conserve vectors and avoid spurious events (Jan Kiszka) * pci/portdrv: PCI/portdrv: Do not setup up IRQs if there are no users
2021-11-05Merge branch 'pci/hotplug'Bjorn Helgaas4-40/+17
- Ignore Link Down/Up caused by error-induced Hot Reset so endpoint driver can remain bound to device during error recovery (Lukas Wunner) - Remove unused resume err_handler (Lukas Wunner) - Remove unused pcie_port_bus_{,un}register() declarations (Lukas Wunner) - Skip compiling err.c when CONFIG_PCIEAER not set (Lukas Wunner) * pci/hotplug: PCI/ERR: Reduce compile time for CONFIG_PCIEAER=n PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarations PCI/portdrv: Remove unused resume err_handler PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot Reset PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()
2021-10-18PCI: Use to_pci_driver() instead of pci_dev->driverUwe Kleine-König1-4/+4
Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pci_dev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-16PCI/ERR: Reduce compile time for CONFIG_PCIEAER=nLukas Wunner1-2/+2
The sole non-static function in err.c, pcie_do_recovery(), is only called from: * aer.c (if CONFIG_PCIEAER=y) * dpc.c (if CONFIG_PCIE_DPC=y, which depends on CONFIG_PCIEAER) * edr.c (if CONFIG_PCIE_EDR=y, which depends on CONFIG_PCIE_DPC) Thus, err.c need not be compiled if CONFIG_PCIEAER=n. Also, pci_uevent_ers() and pcie_clear_device_status(), which are called from err.c, can be #ifdef'ed away unless CONFIG_PCIEAER=y. Since x86_64_defconfig doesn't enable CONFIG_PCIEAER, this change may slightly reduce compile time for anyone doing a test build with that config. Link: https://lore.kernel.org/r/98f9041151268c1c035ab64cca320ad86803f64a.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarationsLukas Wunner1-2/+0
Commit c6c889d932bb ("PCI/portdrv: Remove pcie_port_bus_type link order dependency") removed pcie_port_bus_{,un}register() but erroneously retained their declarations in portdrv.h. Remove them as well. Link: https://lore.kernel.org/r/7fd76b0591c37287ab94d911d8fd9ab9a2afcd16.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15PCI/portdrv: Remove unused resume err_handlerLukas Wunner2-27/+0
Commit 3e41a317ae45 ("PCI/AER: Remove unused aer_error_resume()") removed the resume err_handler from AER. Since no other port service implements the callback, support for it can be removed from portdrv. It can be revived later if need be, preferably by re-using the pcie_port_device_iter() iterator. Link: https://lore.kernel.org/r/25334149b604e005058aeb0fdf51e01f991d5d74.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Keith Busch <kbusch@kernel.org>
2021-10-15PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot ResetLukas Wunner2-0/+5
Stuart Hayes reports that an error handled by DPC at a Root Port results in pciehp gratuitously bringing down a subordinate hotplug port: RP -- UP -- DP -- UP -- DP (hotplug) -- EP pciehp brings the slot down because the Link to the Endpoint goes down. That is caused by a Hot Reset being propagated as a result of DPC. Per PCIe Base Spec 5.0, section 6.6.1 "Conventional Reset": For a Switch, the following must cause a hot reset to be sent on all Downstream Ports: [...] * The Data Link Layer of the Upstream Port reporting DL_Down status. In Switches that support Link speeds greater than 5.0 GT/s, the Upstream Port must direct the LTSSM of each Downstream Port to the Hot Reset state, but not hold the LTSSMs in that state. This permits each Downstream Port to begin Link training immediately after its hot reset completes. This behavior is recommended for all Switches. * Receiving a hot reset on the Upstream Port. Once DPC recovers, pcie_do_recovery() walks down the hierarchy and invokes pcie_portdrv_slot_reset() to restore each port's config space. At that point, a hotplug interrupt is signaled per PCIe Base Spec r5.0, section 6.7.3.4 "Software Notification of Hot-Plug Events": If the Port is enabled for edge-triggered interrupt signaling using MSI or MSI-X, an interrupt message must be sent every time the logical AND of the following conditions transitions from FALSE to TRUE: [...] * The Hot-Plug Interrupt Enable bit in the Slot Control register is set to 1b. * At least one hot-plug event status bit in the Slot Status register and its associated enable bit in the Slot Control register are both set to 1b. Prevent pciehp from gratuitously bringing down the slot by clearing the error-induced Data Link Layer State Changed event before restoring config space. Afterwards, check whether the link has unexpectedly failed to retrain and synthesize a DLLSC event if so. Allow each pcie_port_service_driver (one of them being pciehp) to define a slot_reset callback and re-use the existing pm_iter() function to iterate over the callbacks. Thereby, the Endpoint driver remains bound throughout error recovery and may restore the device to working state. Surprise removal during error recovery is detected through a Presence Detect Changed event. The hotplug port is expected to not signal that event as a result of a Hot Reset. The issue isn't DPC-specific, it also occurs when an error is handled by AER through aer_root_reset(). So while the issue was noticed only now, it's been around since 2006 when AER support was first introduced. [bhelgaas: drop PCI_ERROR_RECOVERY Kconfig, split pm_iter() rename to preparatory patch] Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/ Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver") Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.19+: ba952824e6c1: PCI/portdrv: Report reset for frozen channel Cc: Keith Busch <kbusch@kernel.org>
2021-10-15PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()Lukas Wunner2-10/+11
Rename pm_iter() to pcie_port_device_iter() and make it visible outside CONFIG_PM and portdrv_core.c so it can be used for pciehp slot reset recovery. [bhelgaas: split into its own patch] Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/ Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI/ERR: Factor out common dev->driver expressionsBjorn Helgaas1-16/+24
Save the struct pci_driver pointer from pdev->driver instead of repeating it several times. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-08PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński1-1/+1
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-28PCI: Use kstrtobool() directly, sans strtobool() wrapperKrzysztof Wilczyński1-2/+2
strtobool() is a wrapper around kstrtobool() that has been added for backward compatibility. There is no reason to use the old API, so use kstrtobool() directly. Related: ef951599074b ("lib: move strtobool() to kstrtobool()") Link: https://lore.kernel.org/r/20210915230127.2495723-3-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-20PCI/portdrv: Do not setup up IRQs if there are no usersJan Kiszka1-17/+30
Avoid registering service IRQs if there is no service that offers them or no driver to register a handler against them. This saves IRQ vectors when they are limited (e.g. on x86) and also avoids that spurious events could hit a missing handler. Such spurious events need to be generated by the Jailhouse hypervisor for active MSI vectors when enabling or disabling itself. Link: https://lore.kernel.org/r/8f9a13ac-8ab1-15ac-06cb-c131b488a36f@siemens.com Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-07Merge tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds3-12/+13
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-02Merge branch 'pci/misc'Bjorn Helgaas1-3/+1
- Add pci_numachip_init() declaration (Krzysztof Wilczyński) - Allocate pci_dev_str_match_path() string atomically (Dan Carpenter) - Drop error message when Precision Time Measurement supported but not enabled (Jakub Kicinski) - Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron) - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Make saved capability state private to core (Bjorn Helgaas) - Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko) - Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET) * pci/misc: x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n PCI: Make saved capability state private to core PCI: Add schedule point in proc_bus_pci_read() PCI: Correct the pci_iomap.h header guard #endif comment PCI/PTM: Remove error message at boot PCI: Fix pci_dev_str_match_path() alloc while atomic bug x86/PCI: Add pci_numachip_init() declaration # Conflicts: # include/linux/pci.h
2021-09-02Merge branch 'pci/reset'Bjorn Helgaas1-7/+5
- Cache PCIe Device Capabilities register (Amey Narkhede) - Add pcie_reset_flr() with 'probe' argument (Amey Narkhede) - Add pdev->reset_methods[] array to track reset method ordering (Amey Narkhede) - Remove reset_fn field from pci_dev (Amey Narkhede) - Add sysfs interface to query and set device reset mechanism (Amey Narkhede) - Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni) - Use acpi_pci_power_manageable() instead of duplicating logic (Shanker Donthineni) - Set ACPI fwnode early and at the same time with OF (Shanker Donthineni) - Add support for ACPI _RST reset method (Shanker Donthineni) - Change reset function 'probe' argument to bool (Amey Narkhede) * pci/reset: PCI: Change the type of probe argument in reset functions PCI: Add support for ACPI _RST reset method PCI: Setup ACPI fwnode early and at the same time with OF PCI: Use acpi_pci_power_manageable() PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION PCI: Allow userspace to query and set device reset mechanism PCI: Remove reset_fn field from pci_dev PCI: Add array to track reset method ordering PCI: Add pcie_reset_flr() with 'probe' argument PCI: Cache PCIe Device Capabilities register
2021-08-31PCI/portdrv: Enable Bandwidth Notification only if port supports itStuart Hayes1-2/+7
Previously we assumed that all Root Ports and Switch Downstream Ports supported Link Bandwidth Notification. Per spec, this is only required for Ports supporting Links wider than x1 and/or multiple Link speeds (PCIe r5.0, sec 7.5.3.6). Because we assumed all Ports supported it, we tried to set up a Bandwidth Notification IRQ, which failed for devices that don't support IRQs at all, which meant pcieport didn't attach to the Port at all. Check the Link Bandwidth Notification Capability bit and enable the service only when the Port supports it. [bhelgaas: commit log] Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Link: https://lore.kernel.org/r/20210512213314.7778-1-stuart.w.hayes@gmail.com Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org
2021-08-24PCI: Add pcie_ptm_enabled()Vinicius Costa Gomes1-0/+9
Add a predicate that returns if PCIe PTM (Precision Time Measurement) is enabled. It will only return true if it's enabled in all the ports in the path from the device to the root. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20PCI/PTM: Remove error message at bootJakub Kicinski1-3/+1
Since 39850ed51062 ("PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume"), devices that have PTM capability but don't enable it see this message on calls to pci_save_state(): no suspend buffer for PTM Drop the message, it's perfectly fine not to use a capability. Fixes: 39850ed51062 ("PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume") Link: https://lore.kernel.org/r/20210811185955.3112534-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David E. Box <david.e.box@linux.intel.com>
2021-08-18PCI: Change the type of probe argument in reset functionsAmey Narkhede1-1/+1
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-7/+5
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-07-06Merge branch 'pci/sysfs'Bjorn Helgaas2-11/+13
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add newline to 'devspec' sysfs file (Krzysztof Wilczyński) * pci/sysfs: PCI/sysfs: Add 'devspec' newline PCI/sysfs: Fix 'resource_alignment' newline issues PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun # Conflicts: # drivers/pci/p2pdma.c
2021-07-06Merge branch 'pci/hotplug'Bjorn Helgaas1-5/+69
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to driver (Lukas Wunner) - Declare global cpci_debug in header file (Krzysztof Wilczyński) * pci/hotplug: PCI: cpcihp: Declare cpci_debug in header file PCI: pciehp: Ignore Link Down/Up caused by DPC
2021-06-16PCI: pciehp: Ignore Link Down/Up caused by DPCLukas Wunner1-5/+69
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon an error and attempts to re-enable it when instructed by the DPC driver. A slot which is both DPC- and hotplug-capable is currently powered off by pciehp once DPC is triggered (due to the link change) and powered back up on successful recovery. That's undesirable, the slot should remain powered so the hotplugged device remains bound to its driver. DPC notifies the driver of the error and of successful recovery in pcie_do_recovery() and the driver may then restore the device to working state. Moreover, Sinan points out that turning off slot power by pciehp may foil recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm reset. Sathyanarayanan reports extended delays or failure in link retraining by DPC if pciehp brings down the slot. Fix by detecting whether a Link Down event is caused by DPC and awaiting recovery if so. On successful recovery, ignore both the Link Down and the subsequent Link Up event. Afterwards, check whether the link is down to detect surprise-removal or another DPC event immediately after DPC recovery. Ensure that the corresponding DLLSC event is not ignored by synthesizing it and invoking irq_wake_thread() to trigger a re-run of pciehp_ist(). The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and dpc_handler(), race against each other. If pciehp is faster than DPC, it will wait until DPC recovery completes. Recovery consists of two steps: The first step (waiting for link disablement) is recognizable by pciehp through a set DPC Trigger Status bit. The second step (waiting for link retraining) is recognizable through a newly introduced PCI_DPC_RECOVERING flag. If DPC is faster than pciehp, neither of the two flags will be set and pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag. The flag is zero if DPC didn't occur at all, hence DLLSC events are not ignored by default. pciehp waits up to 4 seconds before assuming that DPC recovery failed and bringing down the slot. This timeout is not taken from the spec (it doesn't mandate one) but based on a report from Yicong Yang that DPC may take a bit more than 3 seconds on HiSilicon's Kunpeng platform. The timeout is necessary because the DPC Trigger Status bit may never clear: On Root Ports which support RP Extensions for DPC, the DPC driver polls the DPC RP Busy bit for up to 1 second before giving up on DPC recovery. Without the timeout, pciehp would then wait indefinitely for DPC to complete. This commit draws inspiration from previous attempts to synchronize DPC with pciehp: By Sinan Kaya, August 2018: https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/ By Ethan Zhao, October 2020: https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/ By Kuppuswamy Sathyanarayanan, March 2021: https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/ Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de Reported-by: Sinan Kaya <okaya@kernel.org> Reported-by: Ethan Zhao <haifeng.zhao@intel.com> Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <kbusch@kernel.org>
2021-06-03PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński2-11/+13
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst Related commit: ad025f8e46f3 ("PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions"). Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-05-27PCI/AER: Use consistent format when printing PCI deviceYicong Yang1-2/+2
We use format domain:bus:slot.function when printing PCI device. Use consistent format in AER messages. [bhelgaas: also drop "AER recover:" prefix since we already have an "AER:" prefix from pr_fmt()] Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-05-04Merge branch 'pci/kernel-doc'Bjorn Helgaas2-4/+4
- Fix kernel-doc warnings (Krzysztof Wilczyński) * pci/kernel-doc: PCI: Fix kernel-doc errors
2021-03-11PCI: Fix kernel-doc errorsKrzysztof Wilczyński2-4/+4
Fix kernel-doc formatting errors, function names that don't match the doc, and some missing parameter documentation. These are reported by: make W=1 drivers/pci/ No functional change intended. [bhelgaas: squashed into one patch since this only changes comments] Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-10PCI/RCEC: Fix RCiEP device to RCEC associationQiuxu Zhuo1-1/+1
rcec_assoc_rciep() used "rciep->devfn" (a single byte encoding both the device and function number) as the device number to check whether the corresponding bit was set in the RCEC's Association Bitmap for RCiEPs. But per PCIe r5.0, sec 7.9.10.2, "Association Bitmap for RCiEPs", the 32-bit bitmap contains one bit per device. That bit applies to all functions of the device. Fix rcec_assoc_rciep() to convert the value of "rciep->devfn" to a device number to ensure that RCiEP devices are correctly associated with the RCEC. Reported-and-tested-by: Wen Jin <wen.jin@intel.com> Fixes: 507b460f8144 ("PCI/ERR: Add pcie_link_rcec() to associate RCiEPs") Link: https://lore.kernel.org/r/20210222011717.43266-1-qiuxu.zhuo@intel.com Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sean V Kelley <sean.v.kelley@intel.com>
2021-02-25Merge tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds7-166/+12
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Remove unnecessary locking around _OSC (Bjorn Helgaas) - Clarify message about _OSC failure (Bjorn Helgaas) - Remove notification of PCIe bandwidth changes (Bjorn Helgaas) - Tidy checking of syscall user config accessors (Heiner Kallweit) Resource management: - Decline to resize resources if boot config must be preserved (Ard Biesheuvel) - Fix pci_register_io_range() memory leak (Geert Uytterhoeven) Error handling (Keith Busch): - Clear error status from the correct device - Retain error recovery status so drivers can use it after reset - Log the type of Port (Root or Switch Downstream) that we reset - Always request a reset for Downstream Ports in frozen state Endpoint framework and NTB (Kishon Vijay Abraham I): - Make *_get_first_free_bar() take into account 64 bit BAR - Add helper API to get the 'next' unreserved BAR - Make *_free_bar() return error codes on failure - Remove unused pci_epf_match_device() - Add support to associate secondary EPC with EPF - Add support in configfs to associate two EPCs with EPF - Add pci_epc_ops to map MSI IRQ - Add pci_epf_ops to expose function-specific attrs - Allow user to create sub-directory of 'EPF Device' directory - Implement ->msi_map_irq() ops for cadence - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence - Add EP function driver to provide NTB functionality - Add support for EPF PCI Non-Transparent Bridge - Add specification for PCI NTB function device - Add PCI endpoint NTB function user guide - Add configfs binding documentation for pci-ntb endpoint function Broadcom STB PCIe controller driver: - Add support for BCM4908 and external PERST# signal controller (Rafał Miłecki) Cadence PCIe controller driver: - Retrain Link to work around Gen2 training defect (Nadeem Athani) - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński) Freescale Layerscape PCIe controller driver: - Add LX2160A rev2 EP mode support (Hou Zhiqiang) - Convert to builtin_platform_driver() (Michael Walle) MediaTek PCIe controller driver: - Fix OF node reference leak (Krzysztof Wilczyński) Microchip PolarFlare PCIe controller driver: - Add Microchip PolarFire PCIe controller driver (Daire McNamara) Qualcomm PCIe controller driver: - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith) - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Drop PCIE_RCAR config option (Lad Prabhakar) - Always allocate MSI addresses in 32bit space (Marek Vasut) Rockchip PCIe controller driver: - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai) - Make 'ep-gpios' DT property optional (Chen-Yu Tsai) Synopsys DesignWare PCIe controller driver: - Work around ECRC configuration hardware defect (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Change size to u64 for EP outbound iATU (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Make dw_pcie ops optional (Jisheng Zhang) - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang) Xilinx Versal CPM PCIe controller driver: - Fix OF node reference leak (Pan Bian) Miscellaneous: - Remove tango host controller driver (Arnd Bergmann) - Remove IRQ handler & data together (altera-msi, brcmstb, dwc) (Martin Kaiser) - Fix xgene-msi race in installing chained IRQ handler (Martin Kaiser) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Fix pci-bridge-emul array overruns (Russell King) - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)" * tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits) PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250 PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings PCI: dwc: Work around ECRC configuration issue PCI/portdrv: Report reset for frozen channel PCI/AER: Specify the type of Port that was reset PCI/ERR: Retain status from error notification PCI/AER: Clear AER status from Root Port when resetting Downstream Port PCI/ERR: Clear status of the reporting device dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional Documentation: PCI: Add PCI endpoint NTB function user guide ...
2021-02-24Merge branch 'pci/link'Bjorn Helgaas5-154/+0
- Remove bandwidth notification for now to avoid reporting spam (Bjorn Helgaas) * pci/link: PCI/LINK: Remove bandwidth notification
2021-02-23PCI/portdrv: Report reset for frozen channelKeith Busch1-1/+2
The PCI error recovery always resets the link for a frozen state, so the port driver should return that a reset is required for its result. This will get the .slot_reset() callback invoked, which is necessary to restore the port's config space. Without this, the driver had been relying on downstream drivers to return this status. Link: https://lore.kernel.org/r/20210104230300.1277180-6-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/AER: Specify the type of Port that was resetKeith Busch1-1/+2
The AER driver may be called upon to reset either a Downstream or a Root Port. Check which type it is to properly identify it when logging that the reset occurred. Link: https://lore.kernel.org/r/20210104230300.1277180-5-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/ERR: Retain status from error notificationKeith Busch1-2/+1
Overwriting the frozen detected status with the result of the link reset loses the NEED_RESET result that drivers are depending on for error handling to report the .slot_reset() callback. Retain this status so that subsequent error handling has the correct flow. Link: https://lore.kernel.org/r/20210104230300.1277180-4-kbusch@kernel.org Reported-by: Hinko Kocevar <hinko.kocevar@ess.eu> Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/AER: Clear AER status from Root Port when resetting Downstream PortKeith Busch1-1/+1
The pci_dev parameter given to aer_root_reset() may be a Downstream Port rather than the Root Port. Get the Root Port from the provided device in order to clear the root's AER status. Link: https://lore.kernel.org/r/20210104230300.1277180-3-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/ERR: Clear status of the reporting deviceKeith Busch1-7/+6
Error handling operates on the first Downstream Port above the detected error, but the error may have been reported by a downstream device. Clear the AER status of the device that reported the error rather than the first Downstream Port. Link: https://lore.kernel.org/r/20210104230300.1277180-2-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-02PCI/LINK: Remove bandwidth notificationBjorn Helgaas5-154/+0
The PCIe Bandwidth Change Notification feature logs messages when the link bandwidth changes. Some users have reported that these messages occur often enough to significantly reduce NVMe performance. GPUs also seem to generate these messages. We don't know why the link bandwidth changes, but in the reported cases there's no indication that it's caused by hardware failures. Remove the bandwidth change notifications for now. Hopefully we can add this back when we have a better understanding of why this happens and how we can make the messages useful instead of overwhelming. Link: https://lore.kernel.org/r/20200115221008.GA191037@google.com/ Link: https://lore.kernel.org/r/155605909349.3575.13433421148215616375.stgit@gimli.home/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=206197 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-01-27Revert "PCI/ASPM: Save/restore L1SS Capability for suspend/resume"Bjorn Helgaas1-44/+0
This reverts commit 4257f7e008ea394fcecc050f1569c3503b8bcc15. Kenneth reported that after 4257f7e008ea, he sees a torrent of disk I/O errors on his NVMe device after suspend/resume until a reboot. Link: https://lore.kernel.org/linux-pci/20201228040513.GA611645@bjorn-Precision-5520/ Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-15Merge branch 'pci/ptm'Bjorn Helgaas1-0/+60
- Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) * pci/ptm: PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
2020-12-15Merge branch 'pci/err'Bjorn Helgaas8-68/+363
- Stop writing AER Capability when we don't own it (Sean V Kelley) - Bind RCEC devices to the Port driver (Qiuxu Zhuo) - Cache the RCEC RA Capability offset (Sean V Kelley) - Add pci_walk_bridge() (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley) - Recover from RCiEP AER errors (Sean V Kelley) - Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) * pci/err: PCI/AER: Add RCEC AER error injection support PCI/PME: Add pcie_walk_rcec() to RCEC PME handling PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/ERR: Recover from RCiEP AER errors PCI/ERR: Add pcie_link_rcec() to associate RCiEPs PCI/ERR: Recover from RCEC AER errors PCI/ERR: Clear AER status only when we control AER PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities() PCI/ERR: Bind RCEC devices to the Root Port driver PCI/AER: Write AER Capability only when we control it
2020-12-10PCI: Disable PTM during suspend to save powerDavid E. Box1-0/+17
There are systems (for example, Intel based mobile platforms since Coffee Lake) where the power drawn while suspended can be significantly reduced by disabling Precision Time Measurement (PTM) on PCIe root ports as this allows the port to enter a lower-power PM state and the SoC to reach a lower-power idle state. To save this power, disable the PTM feature on root ports during pci_prepare_to_sleep() and pci_finish_runtime_suspend(). The feature will be returned to its previous state during restore and error recovery. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361 Link: https://lore.kernel.org/r/20201207223951.19667-2-david.e.box@linux.intel.com Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resumeDavid E. Box1-0/+43
The PCI subsystem does not currently save and restore the configuration space for the Precision Time Measurement (PTM) Extended Capability leading to the possibility of the feature returning disabled on S3 resume. This has been observed on Intel Coffee Lake desktops. Add save/restore of the PTM control register. This saves the PTM Enable, Root Select, and Effective Granularity bits. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20201207223951.19667-1-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add RCEC AER error injection supportQiuxu Zhuo1-1/+4
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and may also have the AER capability. Add RCEC support to the AER error injection driver. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-16-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/PME: Add pcie_walk_rcec() to RCEC PME handlingSean V Kelley2-10/+15
Root Complex Event Collectors (RCEC) appear as peers of Root Ports and also have the PME capability. As with AER, there is a need to be able to walk the RCiEPs associated with their RCEC for purposes of acting upon them with callbacks. Add RCEC support through the use of pcie_walk_rcec() to the current PME service driver and attach the PME service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-15-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add pcie_walk_rcec() to RCEC AER handlingSean V Kelley2-4/+48
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and also have the AER capability. In addition, actions need to be taken for associated RCiEPs. In such cases the RCECs will need to be walked in order to find and act upon their respective RCiEPs. Extend the existing ability to link the RCECs with a walking function pcie_walk_rcec(). Add RCEC support to the current AER service driver and attach the AER service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-14-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/ERR: Recover from RCiEP AER errorsQiuxu Zhuo2-12/+27
Add support for handling AER errors detected by Root Complex Integrated Endpoints (RCiEPs). These errors are signaled to software natively via a Root Complex Event Collector (RCEC) or non-natively via ACPI APEI if the platform retains control of AER or uses a non-standard RCEC-like device. When recovering from RCiEP errors, the Root Error Command and Status registers are in the AER Capability of an associated RCEC (if any), not in a Root Port. In the non-native case, the platform is responsible for those registers and we can't touch them. [bhelgaas: commit log, etc] Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-13-sean.v.kelley@intel.com Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/ERR: Add pcie_link_rcec() to associate RCiEPsSean V Kelley2-0/+97
A Root Complex Event Collector terminates error and PME messages from associated RCiEPs. Use the RCEC Endpoint Association Extended Capability to identify associated RCiEPs. Link the associated RCiEPs as the RCECs are enumerated. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-12-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-05PCI/ERR: Recover from RCEC AER errorsSean V Kelley2-21/+56
A Root Complex Event Collector (RCEC) collects and signals AER errors that were detected by Root Complex Integrated Endpoints (RCiEPs), but it may also signal errors it detects itself. This is analogous to errors detected and signaled by a Root Port. Update the AER service driver to claim RCECs in addition to Root Ports. Add support for handling RCEC-detected AER errors. This does not include handling RCiEP-detected errors that are signaled by the RCEC. Note that we expect these errors only from the native AER and APEI paths, not from DPC or EDR. [bhelgaas: split from combined RCEC/RCiEP patch, commit log] Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.