aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/quirks.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-11PCI: Add MSI masking quirk for Nvidia ION AHCIMarc Zyngier1-0/+6
The ION AHCI device pretends that MSI masking isn't a thing, while it actually implements it and needs MSIs to be unmasked to work. Add a quirk to that effect. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-7/+7
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05PCI: Add ACS quirk for Pericom PI7C9X2G switchesNathan Rossi1-0/+55
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an erratum for ACS P2P Request Redirect behaviour when used in the cut-through forwarding mode. The recommended work around for this issue is to use the switch in store and forward mode. The erratum results in packets being queued and not being delivered upstream, which can be observed as very poor downstream device performance and/or dropped device-generated data/interrupts. Add a fixup so that when enabling or resuming the downstream port we check if it has enabled ACS P2P Request Redirect, and if so, change the device (via the upstream port) to use the store and forward operating mode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471 Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27PCI: Prefer 'unsigned int' over bare 'unsigned'Krzysztof Wilczyński1-6/+6
The bare "unsigned" type implicitly means "unsigned int", but the preferred coding style is to use the complete type name. Update the bare use of "unsigned" to the preferred "unsigned int". No change to functionality intended. See a1ce18e4f941 ("checkpatch: warn on bare unsigned or signed declarations without int"). Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-08PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński1-1/+1
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-20PCI: Mark Atheros QCA6174 to avoid bus resetIngmar Klein1-0/+1
When passing the Atheros QCA6174 through to a virtual machine, the VM hangs at the point where the ath10k driver loads. Add a quirk to avoid bus resets on this device, which avoids the hang. [bhelgaas: commit log] Link: https://lore.kernel.org/r/08982e05-b6e8-5a8d-24ab-da1488ee50a8@web.de Signed-off-by: Ingmar Klein <ingmar_klein@web.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org
2021-09-15PCI: Add AMD GPU multi-function power dependenciesEvan Quan1-2/+7
Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with power dependencies between the GPU and the other functions as in 6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies"). Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI controllers. Without this, runtime power management, including GPU resume and temp and fan sensors don't work correctly. Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704 Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-09-07Merge tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-21/+107
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-02Merge branch 'pci/virtualization'Bjorn Helgaas1-1/+50
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Enforce pci=noats with Transaction Blocking (Alex Williamson) * pci/virtualization: PCI/ACS: Enforce pci=noats with Transaction Blocking PCI: Add ACS quirks for Cavium multi-function devices PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
2021-09-02Merge branch 'pci/reset'Bjorn Helgaas1-14/+11
- Cache PCIe Device Capabilities register (Amey Narkhede) - Add pcie_reset_flr() with 'probe' argument (Amey Narkhede) - Add pdev->reset_methods[] array to track reset method ordering (Amey Narkhede) - Remove reset_fn field from pci_dev (Amey Narkhede) - Add sysfs interface to query and set device reset mechanism (Amey Narkhede) - Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni) - Use acpi_pci_power_manageable() instead of duplicating logic (Shanker Donthineni) - Set ACPI fwnode early and at the same time with OF (Shanker Donthineni) - Add support for ACPI _RST reset method (Shanker Donthineni) - Change reset function 'probe' argument to bool (Amey Narkhede) * pci/reset: PCI: Change the type of probe argument in reset functions PCI: Add support for ACPI _RST reset method PCI: Setup ACPI fwnode early and at the same time with OF PCI: Use acpi_pci_power_manageable() PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION PCI: Allow userspace to query and set device reset mechanism PCI: Remove reset_fn field from pci_dev PCI: Add array to track reset method ordering PCI: Add pcie_reset_flr() with 'probe' argument PCI: Cache PCIe Device Capabilities register
2021-09-02Merge branch 'pci/iommu'Bjorn Helgaas1-0/+39
- Allow PASID on fake PCIe devices, e.g., HiSilicon KunPeng920 and KunPeng930 AMBA devices, without TLP prefixes (Zhangfei Gao) - Allow SVA / dma-can-stall on fake PCIe devices (Zhangfei Gao) * pci/iommu: PCI: Set dma-can-stall for HiSilicon chips PCI: Allow PASID on fake PCIe devices without TLP prefixes
2021-08-31PCI: Set dma-can-stall for HiSilicon chipsZhangfei Gao1-0/+25
HiSilicon KunPeng920 and KunPeng930 have devices that appear as PCI but are actually on the AMBA bus. These fake PCI devices can support SVA via the SMMU stall feature. DT systems can indicate this in the device tree, but ACPI systems don't have that mechanism, so add a "dma-can-stall" property manually for them. [bhelgaas: add text from Robin as comment near quirk] Link: https://lore.kernel.org/r/1626144876-11352-4-git-send-email-zhangfei.gao@linaro.org Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Robin Murphy <robin.murphy@arm.com>
2021-08-26PCI: Allow PASID on fake PCIe devices without TLP prefixesZhangfei Gao1-0/+14
Some systems, e.g., HiSilicon KunPeng920 and KunPeng930, have devices that appear as PCI but are actually on the AMBA bus. Some of these fake PCI devices support a PASID-like feature and they do have a working PASID capability even though they do not use the PCIe Transport Layer Protocol and do not support TLP prefixes. Add a pasid_no_tlp bit for this "PASID works without TLP prefixes" case and update pci_enable_pasid() so it can enable PASID on these devices. Set this bit for HiSilicon KunPeng920 and KunPeng930. [bhelgaas: squashed, commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/1626144876-11352-2-git-send-email-zhangfei.gao@linaro.org Link: https://lore.kernel.org/r/1626144876-11352-3-git-send-email-zhangfei.gao@linaro.org Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-20PCI/ACS: Enforce pci=noats with Transaction BlockingAlex Williamson1-1/+1
PCIe Address Translation Services (ATS) provides a mechanism for a device to provide an on-device caching translation agent (device IOTLB). We already have a means to disable support for this feature via the pci=noats option. For untrusted and externally facing devices, we not only disable ATS support for the device, but we use Access Control Services (ACS) Transaction Blocking to actively prevent devices from sending TLPs with non-default AT field values. Extend pci=noats to also make use of PCI_ACS_TB so that not only is ATS disabled at the device, but blocked at the downstream ports. This provides a means to further lock-down ATS for cases such as device assignment, where it may not be the hardware configuration of the device that makes it untrusted, but the driver running on the device. Link: https://lore.kernel.org/r/162404966325.2362347.12176138291577486015.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rajat Jain <rajatja@google.com>
2021-08-20PCI: Add ACS quirks for Cavium multi-function devicesGeorge Cherian1-0/+4
Some Cavium endpoints are implemented as multi-function devices without ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation for the following devices: - BGX device found on Octeon-TX (8xxx) - CGX device found on Octeon-TX2 (9xxx) - RPM device found on Octeon-TX3 (10xxx) Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-19PCI: Increase D3 delay for AMD Renoir/Cezanne XHCIMarcin Bachry1-0/+1
The Renoir XHCI controller apparently doesn't resume reliably with the standard D3hot-to-D0 delay. Increase it to 20ms. [Alex: I talked to the AMD USB hardware team and the AMD Windows team and they are not aware of any HW errata or specific issues. The HW works fine in Windows. I was told Windows uses a rather generous default delay of 100ms for PCI state transitions.] Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com Signed-off-by: Marcin Bachry <hegel666@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Prike Liang <prike.liang@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
2021-08-18PCI: Change the type of probe argument in reset functionsAmey Narkhede1-10/+10
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-17PCI: Remove reset_fn field from pci_devAmey Narkhede1-1/+1
"reset_fn" indicates whether the device supports any reset mechanism. Remove the use of reset_fn in favor of the reset_methods array that tracks supported reset mechanisms of a device and their ordering. The octeon driver incorrectly used reset_fn to detect whether the device supports FLR or not. Use pcie_reset_flr() to probe whether it supports FLR. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-5-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-6/+3
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-03PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platformsWasim Khan1-0/+45
Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex with unique segment numbers, do provide isolation features to disable peer transactions and validate bus numbers in requests, but do not provide an actual PCIe ACS capability. Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms. LX2xx0A : without security features + CAN-FD LX2160A (0x8d81) - 16 cores LX2120A (0x8da1) - 12 cores LX2080A (0x8d83) - 8 cores LX2xx0C : security features + CAN-FD LX2160C (0x8d80) - 16 cores LX2120C (0x8da0) - 12 cores LX2080C (0x8d82) - 8 cores LX2xx0E : security features + CAN LX2160E (0x8d90) - 16 cores LX2120E (0x8db0) - 12 cores LX2080E (0x8d92) - 8 cores LX2xx0N : without security features + CAN LX2160N (0x8d91) - 16 cores LX2120N (0x8db1) - 12 cores LX2080N (0x8d93) - 8 cores LX2xx2A : without security features + CAN-FD LX2162A (0x8d89) - 16 cores LX2122A (0x8da9) - 12 cores LX2082A (0x8d8b) - 8 cores LX2xx2C : security features + CAN-FD LX2162C (0x8d88) - 16 cores LX2122C (0x8da8) - 12 cores LX2082C (0x8d8a) - 8 cores LX2xx2E : security features + CAN LX2162E (0x8d98) - 16 cores LX2122E (0x8db8) - 12 cores LX2082E (0x8d9a) - 8 cores LX2xx2N : without security features + CAN LX2162N (0x8d99) - 16 cores LX2122N (0x8db9) - 12 cores LX2082N (0x8d9b) - 8 cores [bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE as a clue that they share the same Device ID namespace] Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-26PCI: Restrict ASMedia ASM1062 SATA Max Payload Size SupportedMarek Behún1-0/+1
The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported of 512, but in fact it cannot handle incoming TLPs with payload size of 512. We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark and DesignWare), where the issue presents itself as an External Abort. Bjorn Helgaas says: Probably ASM1062 reports a Malformed TLP error when it receives a data payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an arm64 External Abort. [1] To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256 bytes, so we set the Max Payload Size of devices that may send TLPs to the ASM1062 to 256 or less. [1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695 Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org
2021-07-26PCI: Call Max Payload Size-related fixup quirks earlyMarek Behún1-6/+6
pci_device_add() calls HEADER fixups after pci_configure_device(), which configures Max Payload Size. Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes them into account. Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge") Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-07-08Merge tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-0/+11
Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-07-06Merge branch 'pci/reset'Bjorn Helgaas1-0/+65
- Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) * pci/reset: PCI: Work around Huawei Intelligent NIC VF FLR erratum PCI: Add pci_reset_bus_function() Secondary Bus Reset interface
2021-06-18PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna1-0/+2
The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan1-1/+3
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni1-0/+12
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark TI C667X to avoid bus resetAntti Järvinen1-0/+10
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org
2021-06-07PCI: Leave Apple Thunderbolt controllers on for s2idle or standbyKonstantin Kharlamov1-0/+11
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the external monitor no longer being detected, a stacktrace, and errors like this in dmesg: pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible) The reason is that we know how to turn power to the Thunderbolt controller *off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power back on. We have to rely on firmware to turn the power back on. When going to the "suspend-to-idle" or "standby" system sleep states, firmware is not involved either on the suspend side or the resume side, so we can't use SXIO/SXFP/SXLF to turn the power off. Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when we're going to the "suspend-to-idle" or "standby" system sleep states. Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767 Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org
2021-05-24PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-05-04Merge branch 'remotes/lorenzo/pci/msi'Bjorn Helgaas1-11/+4
- Convert tegra to MSI domains (Marc Zyngier) - Use rcar controller address as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert rcar to MSI domains (Marc Zyngier) - Use xilinx port structure as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert xilinx to MSI domains (Marc Zyngier) - Remove unused Hyper-V msi_controller structure (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) * remotes/lorenzo/pci/msi: PCI: Refactor HT advertising of NO_MSI flag PCI/MSI: Document the various ways of ending up with NO_MSI PCI: mediatek: Advertise lack of built-in MSI handling PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains PCI/MSI: Let PCI host bridges declare their reliance on MSI domains PCI/MSI: Kill default_teardown_msi_irqs() PCI/MSI: Kill msi_controller structure PCI/MSI: Drop use of msi_controller from core code PCI: hv: Drop msi_controller structure PCI: xilinx: Convert to MSI domains PCI: xilinx: Don't allocate extra memory for the MSI capture address PCI: rcar: Convert to MSI domains PCI: rcar: Don't allocate extra memory for the MSI capture address PCI: tegra: Convert to MSI domains
2021-05-04Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+1
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) * pci/virtualization: PCI: Delay after FLR of Intel DC P4510 NVMe
2021-04-20PCI: Refactor HT advertising of NO_MSI flagMarc Zyngier1-11/+4
The few quirks that deal with NO_MSI tend to be copy-paste heavy. Refactor them so that the hierarchy of conditions is slightly cleaner. Link: https://lore.kernel.org/r/20210330151145.997953-15-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-09PCI: Delay after FLR of Intel DC P4510 NVMeRaphael Norwitz1-0/+1
Like the Intel DC P3700 NVMe, the Intel P4510 NVMe exhibits a timeout failure when the driver tries to interact with the device too soon after an FLR. Add a device-specific reset method that delays 250ms after doing an FLR. Link: https://lore.kernel.org/r/20210408190521.16897-1-raphael.norwitz@nutanix.com Signed-off-by: Alay Shah <alay.shah@nutanix.com> Signed-off-by: Suresh Gumpula <suresh.gumpula@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-31IB/mthca: Disable parity reportingHeiner Kallweit1-9/+4
For Mellanox Tavor devices, we previously set dev->broken_parity_status, which does not change the device's behavior; it merely prevents the EDAC PCI error reporting from warning about Master Data Parity Error, Signaled System Error, or Detected Parity Error for this device. Instead, disable Parity Error Response so the device doesn't report parity errors in the first place. [bhelgaas: split out pci_disable_parity(), commit log, keep quirk static] Link: https://lore.kernel.org/r/20210330174318.1289680-3-helgaas@kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2020-12-15Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-0/+1
- Support multiple ATU memory regions (Rob Herring) - Warn if non-prefetchable memory aperture is > 32-bit (Vidya Sagar) - Allow programming ATU for >4GB memory (Vidya Sagar) - Move ATU offset out of driver match data (Rob Herring) - Move "dbi", "dbi2", and "addr_space" resource setup to common code (Rob Herring) - Remove unneeded function wrappers (Rob Herring) - Ensure all outbound ATU windows are reset to reduce dependencies on bootloader (Rob Herring) - Use the default MSI irq_chip for dra7xx (Rob Herring) - Drop the .set_num_vectors() host op (Rob Herring) - Move MSI interrupt setup into DWC common code (Rob Herring) - Rework and simplify DWC MSI initialization (Rob Herring) - Move link handling to DWC common code (Rob Herring) - Move dw_pcie_msi_init() calls to DWC common code (Rob Herring) - Move dw_pcie_setup_rc() calls to DWC common code (Rob Herring) - Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring) - Revert "keystone: Drop duplicated 'num-viewport'" to prepare for detecting number of iATU regions without help from DT (Rob Herring) - Move inbound and outbound windows to common struct (Rob Herring) - Detect number of DWC iATU windows from device registers (Rob Herring) - Drop samsung,exynos5440-pcie binding (Marek Szyprowski) - Add samsung,exynos-pcie and samsung,exynos-pcie-phy bindings for Exynos5433 variant (Marek Szyprowski) - Rework phy-exynos-pcie driver to support Exynos5433 PCIe PHY (Jaehoon Chung) - Rework pci-exynos.c to support Exynos5433 PCIe host (Jaehoon Chung) - Move tegra "dbi" accesses to post common DWC initialization (Vidya Sagar) - Read tegra dbi" base address in application logic (Vidya Sagar) - Fix tegra ASPM-L1SS advertisement disable code (Vidya Sagar) - Set Tegra194 DesignWare IP version to 0x490A (Vidya Sagar) - Continue tegra unconfig sequence even if parts fail (Vidya Sagar) - Check return value of tegra_pcie_init_controller() (Vidya Sagar) - Disable tegra LTSSM during L2 entry (Vidya Sagar) - Add SM8250 SoC PCIe DT bindings and support (Manivannan Sadhasivam) - Add SM8250 BDF to SID mapping (Manivannan Sadhasivam) - Set 32-bit DMA mask for DWC MSI target address allocation (Vidya Sagar) * remotes/lorenzo/pci/dwc: PCI: dwc: Set 32-bit DMA mask for MSI target address allocation PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 PCI: qcom: Add SM8250 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC PCI: tegra: Disable LTSSM during L2 entry PCI: tegra: Check return value of tegra_pcie_init_controller() PCI: tegra: Continue unconfig sequence even if parts fail PCI: tegra: Set DesignWare IP version PCI: tegra: Fix ASPM-L1SS advertisement disable code PCI: tegra: Read "dbi" base address to program in application logic PCI: tegra: Move "dbi" accesses to post common DWC initialization PCI: dwc: exynos: Rework the driver to support Exynos5433 variant phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY dt-bindings: phy: exynos: add the samsung,exynos-pcie-phy binding dt-bindings: PCI: exynos: add the samsung,exynos-pcie binding dt-bindings: PCI: exynos: drop samsung,exynos5440-pcie binding PCI: dwc: Detect number of iATU windows PCI: dwc: Move inbound and outbound windows to common struct Revert "PCI: dwc/keystone: Drop duplicated 'num-viewport'" PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init() PCI: dwc: Move dw_pcie_setup_rc() to DWC common code PCI: dwc: Move dw_pcie_msi_init() into core PCI: dwc: Move link handling into common code PCI: dwc: Rework MSI initialization PCI: dwc: Move MSI interrupt setup into DWC common code PCI: dwc: Drop the .set_num_vectors() host op PCI: dwc/dra7xx: Use the common MSI irq_chip PCI: dwc: Ensure all outbound ATU windows are reset PCI: dwc/intel-gw: Remove some unneeded function wrappers PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code PCI: dwc/intel-gw: Move ATU offset out of driver match data PCI: dwc: Add support to program ATU for >4GB memory PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit PCI: dwc: Support multiple ATU memory regions
2020-12-15Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+17
- Mark AMD Raven iGPU ATS as broken in some Emerson platforms to avoid issues (Alex Deucher) - Add function 1 DMA alias quirk for Marvell 9215 SATA controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller PCI: Mark AMD Raven iGPU ATS as broken in some platforms
2020-12-15PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controllerBjorn Helgaas1-0/+3
Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 Link: https://lore.kernel.org/r/20201110220516.697934-1-helgaas@kernel.org Reported-by: John Smith <LK7S2ED64JHGLKj75shg9klejHWG49h5hk@protonmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI: Mark AMD Raven iGPU ATS as broken in some platformsAlex Deucher1-0/+14
Edgar reported [1] AMD Raven iGPU errors on several of his systems. There is no root cause. Turn off ATS on these systems to avoid the issue. [1] https://lore.kernel.org/linux-iommu/MWHPR10MB1310CDB6829DDCF5EA84A14689150@MWHPR10MB1310.namprd10.prod.outlook.com/ [bhelgaas: commit log] Link: https://lore.kernel.org/r/MWHPR10MB131082779A86BE4CCCF190B789CB0@MWHPR10MB1310.namprd10.prod.outlook.com Reported-by: Edgar Merger <Edgar.Merger@emerson.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-01PCI: dwc: exynos: Rework the driver to support Exynos5433 variantJaehoon Chung1-0/+1
Exynos5440 SoC support has been dropped since commit 8c83315da1cf ("ARM: dts: exynos: Remove Exynos5440"). Rework this driver to support DWC PCIe variant found in the Exynos5433 SoCs. The main difference in Exynos5433 variant is lack of the MSI support (the MSI interrupt is not even routed to the CPU). [mszyprow: reworked the driver to support only Exynos5433 variant, simplified code, rebased onto current kernel code, added regulator support, converted to the regular platform driver, removed MSI related code, rewrote commit message, added help] Link: https://lore.kernel.org/r/20201113170139.29956-6-m.szyprowski@samsung.com Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2020-11-20PCI: Use predefined Pericom Vendor IDAndy Shevchenko1-3/+3
Pericom has predefined Vendor ID, use it instead of hard-coded value. Link: https://lore.kernel.org/r/20201106100526.17726-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI: Disable MSI for Pericom PCIe-USB adapterAndy Shevchenko1-4/+13
Pericom PCIe-USB adapter advertises MSI, but documentation says "The MSI Function is not implemented on this device" in chapters 7.3.27, 7.3.29-7.3.31, and Alberto found that MSI in fact does not work. Disable MSI for these devices. Datasheet: https://www.diodes.com/assets/Datasheets/PI7C9X440SL.pdf Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Link: https://lore.kernel.org/linux-usb/20201030134826.GP4077@smile.fi.intel.com/ Link: https://lore.kernel.org/r/20201106100526.17726-1-andriy.shevchenko@linux.intel.com Reported-by: alberto.vignani@fastwebnet.it Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-22Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-34/+44
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-21Merge branch 'pci/pm'Bjorn Helgaas1-34/+34
- Remove unused pcibios_pm_ops (Vaibhav Gupta) - Rename pci_dev.d3_delay to d3hot_delay (Krzysztof Wilczyński) - Apply D2 transition delay as microseconds, not milliseconds (Bjorn Helgaas) * pci/pm: PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" PCI/PM: Remove unused PCI_PM_BUS_WAIT PCI/PM: Rename pci_dev.d3_delay to d3hot_delay PCI/PM: Remove unused pcibios_pm_ops
2020-09-29PCI/PM: Rename pci_dev.d3_delay to d3hot_delayKrzysztof Wilczyński1-34/+34
PCI devices support two variants of the D3 power state: D3hot (main power present) D3cold (main power removed). Previously struct pci_dev contained: unsigned int d3_delay; /* D3->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ "d3_delay" refers specifically to the D3hot state. Rename it to "d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for Specifying Device Readiness Durations" in the PCI Firmware spec r3.2, sec 4.6.9. There is no change to the functionality. Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-16PCI/ACS: Enable Translation Blocking for external devicesRajat Jain1-0/+10
Translation Blocking is a required feature for Downstream Ports (Root Ports or Switch Downstream Ports) that implement ACS. When enabled, the Port checks the Address Type (AT) of each upstream Memory Request it receives. The default AT (00b) means "untranslated" and the IOMMU can decide whether to treat the address as I/O virtual or physical. If AT is not the default, i.e., if the Memory Request contains an already-translated (physical) address, the Port blocks the request and reports an ACS error. When enabling ACS, enable Translation Blocking for external-facing ports and untrusted (external) devices. This is to help prevent attacks from external devices that initiate DMA with physical addresses that bypass the IOMMU. [bhelgaas: commit log, simplify setting bit and drop warning; TB is required for Downstream Ports with ACS, so we should never see the warning] Link: https://lore.kernel.org/r/20200707224604.3737893-4-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-03PCI / thunderbolt: Switch to use device links instead of PCI quirkMika Westerberg1-57/+0
On older Apple systems there is currently a PCI quirk in place to block resume of tunneled PCIe ports until NHI (Thunderbolt controller) is resumed. This makes sure the PCIe tunnels are re-established before PCI core notices it. With device links the same thing can be done without quirks. The driver core will make sure the supplier (NHI) is resumed before consumers (PCIe downstream ports). For this reason switch the Thunderbolt driver to use device links and remove the PCI quirk. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-07Merge tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-14/+19
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.