aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-10Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-0/+57
Pull IOMMU updates from Joerg Roedel: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups * tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Get domain ID before clear pasid entry iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm() iommu/vt-d: Set context field after value initialized iommu/vt-d: Disable ATS support on untrusted devices iommu/mediatek: Fix semicolon code style issue MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope iommu/hyper-v: Add Hyper-V stub IOMMU driver x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available PCI/ATS: Add inline to pci_prg_resp_pasid_required() iommu/vt-d: Check identity map for hot-added devices iommu: Fix IOMMU debugfs fallout iommu: Document iommu_ops.is_attach_deferred() iommu: Document iommu_ops.iotlb_sync_map() iommu/vt-d: Enable ATS only if the device uses page aligned address. PCI/ATS: Add pci_ats_page_aligned() interface iommu/vt-d: Fix PRI/PASID dependency issue. PCI/ATS: Add pci_prg_resp_pasid_required() interface. iommu/vt-d: Allow interrupts from the entire bus for aliased devices iommu/vt-d: Add helper to set an IRTE to verify only the bus number iommu: Fix flush_tlb_all typo ...
2019-03-09Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds44-479/+1514
Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ...
2019-03-06Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds2-7/+5
Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-06Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-1/+14
- Configure MPS settings for VMD root ports (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI/VMD: Configure MPS settings before adding devices
2019-03-06Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas4-31/+74
- Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) * remotes/lorenzo/pci/misc: PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags PCI: pci-bridge-emul: Create per-bridge copy of register behavior
2019-03-06Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas1-4/+9
- Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation
2019-03-06Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-33/+28
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) * remotes/lorenzo/pci/hv: PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
2019-03-06Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas11-59/+337
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) * remotes/lorenzo/pci/endpoint: misc: pci_endpoint_test: Add the layerscape EP device support PCI: layerscape: Add EP mode support arm64: dts: Add the PCIE EP node in dts dt-bindings: add DT binding for the layerscape PCIe controller with EP mode PCI: endpoint: Remove features member in struct pci_epc PCI: designware-plat: Remove setting epc->features in Designware plat EP driver PCI: rockchip: Remove pci_epf_linkup() from Rockchip EP driver PCI: cadence: Remove pci_epf_linkup() from Cadence EP driver PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit PCI: pci-epf-test: Remove setting epf_bar flags in function driver PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags PCI: endpoint: Add helper to get first unreserved BAR PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops PCI: dwc: Add ->get_features() callback function to dw_pcie_ep_ops PCI: endpoint: Add new pci_epc_ops to get EPC features PCI: endpoint: functions: Use memcpy_fromio()/memcpy_toio()
2019-03-06Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas9-124/+373
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) * remotes/lorenzo/pci/dwc: PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ dt-bindings: imx6q-pcie: Add "pcie_aux" clock for imx8mq PCI: qcom: Don't deassert reset GPIO during probe PCI: imx: Add workaround for e10728, IMX7d PCIe PLL failure ARM: dts: imx7d: Add node for PCIe PHY dt-bindings: imx6q-pcie: Add description of imx7d pcie phy PCI: dwc: Print debug error message when MSI-X entry control mask bit is set PCI: imx6: Add support for i.MX8MQ PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag PCI: imx6: Mark PHY functions as i.MX6 specific PCI: imx6: Introduce drvdata PCI: dwc: Replace bit rotation operation (1 << bit) with BIT(bit) PCI: dwc: Improve code readability and simplify mask/unmask operations PCI: dwc: Rename variable name from data to d on dw_pcie_irq_domain_free() PCI: dwc: Rename variable name from data to d on dw_pci_msi_set_affinity() PCI: dwc: Rename variable name from data to d on dw_pci_setup_msi_msg() PCI: dwc: Rename variable name from data to d on dw_pci_bottom_mask/unmask() PCI: dwc: Remove unnecessary header include (signal.h) PCI: dwc: Remove unnecessary header include (of_gpio.h) PCI: dwc: dra7xx: Invoke phy_set_mode() API to set PHY mode to PHY_MODE_PCIE PCI: dwc: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7 dt-bindings: PCI: dra7xx: Add SoC specific compatible strings
2019-03-06Merge branch 'remotes/lorenzo/pci/altera'Bjorn Helgaas2-25/+247
- Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) * remotes/lorenzo/pci/altera: dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support
2019-03-06Merge branch 'pci/pm'Bjorn Helgaas3-35/+52
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) * pci/pm: PCI/PME: Fix possible use-after-free on remove PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove() PCI: pciehp: Disable Data Link Layer State Changed event on suspend Revert "PCI/PME: Implement runtime PM callbacks" PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
2019-03-06Merge branch 'pci/portdrv'Bjorn Helgaas5-9/+134
- Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) * pci/portdrv: PCI/LINK: Report degraded links via link bandwidth notification PCI/portdrv: Support PCIe services on subtractive decode bridges PCI/portdrv: Use conventional Device ID table formatting
2019-03-06Merge branch 'pci/misc'Bjorn Helgaas6-38/+39
- Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) * pci/misc: PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI: Clean up usage of __u32 type genirq/msi: Clean up usage of __u8/__u16 types PCI: Move Rohm Vendor ID to generic list PCI: pciehp: Add HXT quirk for Command Completed errata PCI: Add ACS quirk for HXT SD4800 PCI: Add HXT vendor ID PCI: Use of_node_name_eq() for node name comparisons PCI: Mark expected switch fall-through
2019-03-06Merge branch 'pci/hotplug'Bjorn Helgaas4-37/+15
- Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) * pci/hotplug: PCI: ibmphp: Turn semaphores into completions or mutexes PCI: pciehp: Assign ctrl->slot_ctrl before writing it to hardware
2019-03-06Merge branch 'pci/enumeration'Bjorn Helgaas3-59/+70
- Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) * pci/enumeration: x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub PCI: Rely on config space header type, not class code PCI: Make pci_size() return real BAR size PCI: Probe bridge window attributes once at enumeration-time
2019-03-06Merge branch 'pci/dpc'Bjorn Helgaas1-1/+26
- Fix DPC use of uninitialized data (Dongdong Liu) * pci/dpc: PCI/DPC: Fix print AER status in DPC event handling
2019-03-06Merge branch 'pci/aspm'Bjorn Helgaas2-15/+74
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) * pci/aspm: PCI/ASPM: Save LTR Capability for suspend/resume PCI/ASPM: Use LTR if already enabled by platform
2019-03-06PCI: Update PCIEPORTBUS Kconfig help textHou Zhiqiang1-4/+3
The Virtual Channel service has been removed and Downstream Port Containment has been added, so update the symbol description to be consistent with the current code. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-03-05PCI: Fix "try" semantics of bus and slot resetAlex Williamson1-28/+26
The commit referenced below introduced device locking around save and restore of state for each device during a PCI bus "try" reset, making it decidely non-"try" and prone to deadlock in the event that a device is already locked. Restore __pci_reset_bus() and __pci_reset_slot() to their advertised locking semantics by pushing the save and restore functions into the branch where the entire tree is already locked. Extend the helper function names with "_locked" and update the comment to reflect this calling requirement. Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2019-03-05PCI/LINK: Report degraded links via link bandwidth notificationAlexandru Gagniuc5-6/+129
A warning is generated when a PCIe device is probed with a degraded link, but there was no similar mechanism to warn when the link becomes degraded after probing. The Link Bandwidth Notification provides this mechanism. Use the Link Bandwidth Management Interrupt to detect bandwidth changes, and rescan the bandwidth, looking for the weakest point. This is the same logic used in probe(). Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-03-05Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-23/+16
Pull irq updates from Thomas Gleixner: "The interrupt departement delivers this time: - New infrastructure to manage NMIs on platforms which have a sane NMI delivery, i.e. identifiable NMI vectors instead of a single lump. - Simplification of the interrupt affinity management so drivers don't have to implement ugly loops around the PCI/MSI enablement. - Speedup for interrupt statistics in /proc/stat - Provide a function to retrieve the default irq domain - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - The usual small fixes, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) irqchip/imx-irqsteer: Add multi output interrupts support irqchip/imx-irqsteer: Change to use reg_num instead of irq_group dt-bindings: irq: imx-irqsteer: Add multi output interrupts support dt-binding: irq: imx-irqsteer: Use irq number instead of group number irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tables irqdomain: Allow the default irq domain to be retrieved irqchip/sifive-plic: Implement irq_set_affinity() for SMP host irqchip/sifive-plic: Differentiate between PLIC handler and context irqchip/sifive-plic: Add warning in plic_init() if handler already present irqchip/sifive-plic: Pre-compute context hart base and enable base PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets genirq/affinity: Remove the leftovers of the original set support nvme-pci: Simplify interrupt allocation genirq/affinity: Add new callback for (re)calculating interrupt sets genirq/affinity: Store interrupt sets size in struct irq_affinity genirq/affinity: Code consolidation irqchip/irq-sifive-plic: Check and continue in case of an invalid cpuid. irqchip/i8259: Fix shutdown order by moving syscore_ops registration dt-bindings: interrupt-controller: loongson ls1x intc ...
2019-03-04PCI: altera: Enable driver on ARM64Ley Foon Tan1-1/+1
Enable PCIE_ALTERA on ARM64 platform. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-04PCI: altera: Add Stratix 10 PCIe supportLey Foon Tan1-24/+246
Add PCIe Root Port support for Stratix 10 device. Main differences compared to the PCIe Root Port IP on Cyclone V and Arria 10 devices: - HIP interface to access Root Port configuration register - TLP programming flow: - One REG0 register - Don't need to check alignment Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-01PCI/PME: Fix possible use-after-free on removeSven Van Asbroeck1-0/+1
In remove(), ensure that the PME work cannot run after kfree() is called. Otherwise, this could result in a use-after-free. This issue was detected with the help of Coccinelle. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Frederick Lawler <fred@fredlawl.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-01PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' staticWei Yongjun1-1/+1
Fix the following sparse warning: drivers/pci/controller/pci-aardvark.c:469:28: warning: symbol 'advk_pci_bridge_emul_ops' was not declared. Should it be static? Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-03-01PCI: dwc: skip MSI init if MSIs have been explicitly disabledLucas Stach1-1/+1
Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: stable@vger.kernel.org
2019-03-01PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()Maya Nakamura1-21/+17
Remove the duplicate implementation of cpumask_to_vpset() and use the shared implementation. Export hv_max_vp_index, which is required by cpumask_to_vpset(). Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
2019-03-01PCI: hv: Replace hv_vp_set with hv_vpsetMaya Nakamura1-13/+12
Remove a duplicate definition of VP set (hv_vp_set) and use the common definition (hv_vpset) that is used in other places. Change the order of the members in struct hv_pcibus_device so that the declaration of retarget_msi_interrupt_params is the last member. Struct hv_vpset, which contains a flexible array, is nested two levels deep in struct hv_pcibus_device via retarget_msi_interrupt_params. Add a comment that retarget_msi_interrupt_params should be the last member of struct hv_pcibus_device. Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
2019-03-01PCI: hv: Add __aligned(8) to struct retarget_msi_interruptMaya Nakamura1-1/+1
Because Hyper-V requires that hypercall arguments be aligned on an 8 byte boundary, add __aligned(8) to struct retarget_msi_interrupt. Link: https://lore.kernel.org/lkml/87k1hlqlby.fsf@vitty.brq.redhat.com/ Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-01PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAMHonghui Zhang1-1/+7
The PCIE_AXI_WINDOW0 register defines the inbound window size for requests coming from PCI endpoints. Requests outside of this window will be treated as unsupported requests. Enlarge this window size from 2^31 to 2^33 to support a 8GB address space (which gives endpoints DMA access to full 4GB DRAM address range - physical DRAM starts at 0x40000000). Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-01PCI: mediatek: Fix memory mapped IO range size computationHonghui Zhang1-3/+2
Mediatek's HW assigns a MMIO address range (typically starts from 0x20000000 to 0x2fffffff for both mt2712 and mt7622) for PCI usage. This MMIO address space represents the address space that can be allocated to PCI devices through Base Address Registers. Even though the full MMIO address range is available to be allocated, it should be enabled by the PCIE_AHB_TRANS_BASE register in the host controller and the size that is enabled is determined by AHB2PCIE_SIZE bits in this register. Owing to a bug in the MMIO window size computation, current code does not enable the full size of the available MMIO address range in the PCI host controller; if the PCI devices BARs requested size exceeds the size enabled through the PCIE_AHB_TRANS_BASE register the requests targeting the disabled address address space will be blocked by the root complex causing a system error. Existing code has never run into a system error in production because even half of the enabled MMIO range (128MB) is big enough for typical devices BAR requests (4MB) but the full MMIO address range should be enabled regardless. Fix the MMIO window size computation by using resource_size(mem) instead of mem->end - mem->start. Since the MMIO window size for both MT2712 and MT7622 is 0x10000000, this change will update the parameter passed to fls() from 0xfffffff to 0x10000000 and calculate the whole memory mapped IO range size correctly. Detected through coccinelle semantic patch (and related warning): scripts/coccinelle/api/resource_size.cocci: pcie-mediatek.c:720:13-16: WARNING: Suspicious code. resource_size is maybe missing with mem Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-01PCI: dwc: Remove superfluous shifting in definitionsAndrey Smirnov1-7/+7
Surrounding definitions no longer use explicit shift, so "<< 0" here serve no purpose. Remove them. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org
2019-03-01PCI: dwc: Make use of GENMASK/FIELD_PREPAndrey Smirnov1-13/+16
Convert various multi-bit fields to be defined using GENMASK/FIELD_PREP. This way bit field boundaries are defined in a single place only, as well as defined in a way that makes it easier to verify them against the reference manual. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org
2019-03-01PCI: dwc: Make use of BIT() in constant definitionsAndrey Smirnov3-9/+8
Avoid using explicit left shifts and convert various definitions to use BIT() instead. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [lorenzo.pieralisi@arm.com: fixed PORT_LOGIC_SPEED_CHANGE redefinition] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org
2019-03-01PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()Andrey Smirnov1-38/+23
Default implementation of pcie_rd_other_conf() and dw_pcie_wd_other_conf() share more than 80% of their code. Move shared code into a dedicated subroutine and convert pcie_rd_other_conf() and dw_pcie_wd_other_conf() to use it. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org
2019-03-01PCI: dwc: Make use of IS_ALIGNED()Andrey Smirnov1-2/+2
Make the intent a bit more clear as well as get rid of explicit arithmetic by using IS_ALIGNED() to determine if "addr" is aligned to "size". No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org
2019-03-01PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQAndrey Smirnov1-1/+17
The PCIe IP block has an additional clock, "pcie_aux", that needs to be controlled by the driver. Add code to support it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org
2019-03-01Merge branches 'iommu/fixes', 'arm/msm', 'arm/tegra', 'arm/mediatek', 'x86/vt-d', 'x86/amd', 'hyper-v' and 'core' into nextJoerg Roedel10-53/+98
2019-02-28PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove()Rafael J. Wysocki1-7/+15
Dongdong reported a deadlock triggered by a hotplug event during a sysfs "remove" operation: pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up # echo 1 > 0000:00:0c.0/remove PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is: remove_store pci_stop_and_remove_bus_device_locked pci_lock_rescan_remove pci_stop_and_remove_bus_device ... pcie_pme_remove pcie_pme_suspend synchronize_irq # wait for hotplug IRQ handler pci_unlock_rescan_remove The hotplug side is: pciehp_ist pciehp_handle_presence_or_link_change pciehp_configure_device pci_lock_rescan_remove # wait for pci_unlock_rescan_remove() INFO: task bash:10913 blocked for more than 120 seconds. # ps -ax |grep D PID TTY STAT TIME COMMAND 10913 ttyAMA0 Ds+ 0:00 -bash 14022 ? D 0:00 [irq/745-pciehp] # cat /proc/14022/stack __switch_to+0x94/0xd8 pci_lock_rescan_remove+0x20/0x28 pciehp_configure_device+0x30/0x140 pciehp_handle_presence_or_link_change+0x324/0x458 pciehp_ist+0x1dc/0x1e0 # cat /proc/10913/stack __switch_to+0x94/0xd8 synchronize_irq+0x8c/0xc0 pcie_pme_suspend+0xa4/0x118 pcie_pme_remove+0x20/0x40 pcie_port_remove_service+0x3c/0x58 ... pcie_port_device_remove+0x2c/0x48 pcie_portdrv_remove+0x68/0x78 pci_device_remove+0x48/0x120 ... pci_stop_bus_device+0x84/0xc0 pci_stop_and_remove_bus_device_locked+0x24/0x40 remove_store+0xa4/0xb8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two reasons. First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the native hotplug interrupt handler as well as for the PME one, because they share one IRQ (as per the spec). That may deadlock if hotplug is signaled while pcie_pme_remove() is running and the latter calls pci_lock_rescan_remove() before the former. Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled for the port, it will return without disabling the interrupt as expected by pcie_pme_remove() which was overlooked by commit c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume"). To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear its status and prevent the PME worker function from re-enabling it before calling free_irq() on it, which should be sufficient. Fixes: c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume") Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.com Reported-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bhelgaas: add URL and deadlock details from Dongdong] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-02-28PCI: qcom: Don't deassert reset GPIO during probeBjorn Andersson1-1/+1
Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org
2019-02-26PCI/ATS: Add pci_ats_page_aligned() interfaceKuppuswamy Sathyanarayanan1-0/+27
Return the Page Aligned Request bit in the ATS Capability Register. As per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit is set, it indicates the Untranslated Addresses generated by the device are always aligned to a 4096 byte boundary. An IOMMU that can only translate page-aligned addresses can only be used with devices that always produce aligned Untranslated Addresses. This interface will be used by drivers for such IOMMUs to determine whether devices can use the ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-26PCI/ATS: Add pci_prg_resp_pasid_required() interface.Kuppuswamy Sathyanarayanan1-0/+30
Return the PRG Response PASID Required bit in the Page Request Status Register. As per PCIe spec r4.0, sec 10.5.2.3, if this bit is Set, the device expects a PASID TLP Prefix on PRG Response Messages when the corresponding Page Requests had a PASID TLP Prefix. If Clear, the device does not expect PASID TLP Prefixes on any PRG Response Message, and the device behavior is undefined if the device receives a PRG Response Message with a PASID TLP Prefix. Also the device behavior is undefined if this bit is Set and the device receives a PRG Response Message with no PASID TLP Prefix when the corresponding Page Requests had a PASID TLP Prefix. This function will be used by drivers like IOMMU, if it is required to check the status of the PRG Response PASID Required bit before enabling the PASID support of the device. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-02-22PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flagsThomas Petazzoni4-4/+15
Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2019-02-22PCI: pci-bridge-emul: Create per-bridge copy of register behaviorThomas Petazzoni2-28/+60
The behavior of the different registers of the PCI-to-PCI bridge is currently encoded in two global arrays, shared by all instances of PCI-to-PCI bridge emulation. However, we will need to tweak the behavior on a per-bridge basis, to accommodate for different capabilities of the platforms where this code is used. In preparation for this, create a per-bridge copy of the register behavior arrays, so that they can later be tweaked on a per-bridge basis. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2019-02-21PCI/DPC: Fix print AER status in DPC event handlingDongdong Liu1-1/+26
Previously dpc_handler() called aer_get_device_error_info() without initializing info->severity, so aer_get_device_error_info() relied on uninitialized data. Add dpc_get_aer_uncorrect_severity() to read the port's AER status, mask, and severity registers and set info->severity. Also, clear the port's AER fatal error status bits. Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org # v4.19+
2019-02-21PCI: layerscape: Add EP mode supportXiaowei Bao2-1/+157
Add the PCIe EP mode support to the layerscape platform controller. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-18PCI/MSI: Remove obsolete sanity checks for multiple interrupt setsThomas Gleixner1-14/+0
Multiple interrupt sets for affinity spreading are now handled in the core code and the number of sets and their size is recalculated via a driver supplied callback. That avoids the requirement to invoke pci_alloc_irq_vectors_affinity() with the arguments minvecs and maxvecs set to the same value and the callsite handling the ENOSPC situation. Remove the now obsolete sanity checks and the related comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.778630549@linutronix.de
2019-02-18genirq/affinity: Add new callback for (re)calculating interrupt setsMing Lei1-9/+16
The interrupt affinity spreading mechanism supports to spread out affinities for one or more interrupt sets. A interrupt set contains one or more interrupts. Each set is mapped to a specific functionality of a device, e.g. general I/O queues and read I/O queus of multiqueue block devices. The number of interrupts per set is defined by the driver. It depends on the total number of available interrupts for the device, which is determined by the PCI capabilites and the availability of underlying CPU resources, and the number of queues which the device provides and the driver wants to instantiate. The driver passes initial configuration for the interrupt allocation via a pointer to struct irq_affinity. Right now the allocation mechanism is complex as it requires to have a loop in the driver to determine the maximum number of interrupts which are provided by the PCI capabilities and the underlying CPU resources. This loop would have to be replicated in every driver which wants to utilize this mechanism. That's unwanted code duplication and error prone. In order to move this into generic facilities it is required to have a mechanism, which allows the recalculation of the interrupt sets and their size, in the core code. As the core code does not have any knowledge about the underlying device, a driver specific callback is required in struct irq_affinity, which can be invoked by the core code. The callback gets the number of available interupts as an argument, so the driver can calculate the corresponding number and size of interrupt sets. At the moment the struct irq_affinity pointer which is handed in from the driver and passed through to several core functions is marked 'const', but for the callback to be able to modify the data in the struct it's required to remove the 'const' qualifier. Add the optional callback to struct irq_affinity, which allows drivers to recalculate the number and size of interrupt sets and remove the 'const' qualifier. For simple invocations, which do not supply a callback, a default callback is installed, which just sets nr_sets to 1 and transfers the number of spreadable vectors to the set_size array at index 0. This is for now guarded by a check for nr_sets != 0 to keep the NVME driver working until it is converted to the callback mechanism. To make sure that the driver configuration is correct under all circumstances the callback is invoked even when there are no interrupts for queues left, i.e. the pre/post requirements already exhaust the numner of available interrupts. At the PCI layer irq_create_affinity_masks() has to be invoked even for the case where the legacy interrupt is used. That ensures that the callback is invoked and the device driver can adjust to that situation. [ tglx: Fixed the simple case (no sets required). Moved the sanity check for nr_sets after the invocation of the callback so it catches broken drivers. Fixed the kernel doc comments for struct irq_affinity and de-'This patch'-ed the changelog ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.512444498@linutronix.de
2019-02-15PCI: pciehp: Disable Data Link Layer State Changed event on suspendMika Westerberg1-2/+15
Commit 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") tried to solve an issue where the hierarchy immediately wakes up when it is transitioned into D3cold. However, it turns out to prevent PME propagation on some systems that do not support D3cold. I looked more closely at what might cause the immediate wakeup. It happens when the ACPI power resource of the root port is turned off. The AML code associated with the _OFF() method of the ACPI power resource starts a PCIe L2/L3 Ready transition and waits for it to complete. Right after the L2/L3 Ready transition is started the root port receives a PME from the downstream port. The simplest hierarchy where this happens looks like this: 00:1d.0 PCIe Root Port ^ | v 05:00.0 PCIe switch #1 upstream port 06:01.0 PCIe switch #1 downstream hotplug port ^ | v 08:00.0 PCIe switch #2 upstream port It seems that the PCIe link between the two switches, before PME_Turn_Off/PME_TO_Ack is complete for the whole hierarchy, goes inactive and triggers PME towards the root port bringing it back to D0. The L2/L3 Ready sequence is described in PCIe r4.0 spec sections 5.2 and 5.3.3 but unfortunately they do not state what happens if DLLSCE is enabled during the sequence. Disabling Data Link Layer State Changed event (DLLSCE) seems to prevent the issue and still allows the downstream hotplug port to notice when a device is plugged/unplugged. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202593 Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.20+
2019-02-15PCI/portdrv: Support PCIe services on subtractive decode bridgesHonghui Zhang1-0/+2
The Class Code for subtractive decode PCI-to-PCI bridge is 060401h; add an entry to make portdrv support this type of bridge. This allows use of PCIe services on subtractive decode ports. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [bhelgaas: add braces surrounding entry] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.