aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2013-10-07PCI: convert bus code to use bus_groupsGreg Kroah-Hartman3-5/+15
The bus_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the PCI bus code to use the correct field. Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-04PCI: exynos: Add missing clk_disable_unprepare() on error pathWei Yongjun1-6/+12
Add the missing clk_disable_unprepare() before return from exynos_pcie_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
2013-09-30PCI: mvebu: add support for Marvell Dove SoCsSebastian Hesselbarth2-1/+2
This patch adds a compatible for the PCIe controller found on Marvell Dove SoCs. Binding documentation and Kconfig entry are also updated. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30PCI: mvebu: add support for reset on GPIOSebastian Hesselbarth1-1/+32
This patch adds a check for DT passed reset-gpios property and deasserts/ asserts reset pin on probe/remove with configurable delay. Corresponding binding documentation is also updated. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30PCI: mvebu: remove subsys_initcallSebastian Hesselbarth1-19/+14
This removes the subsys_initcall from the driver and converts it to a normal platform_driver. Also, drvdata is set and a remove functions is added to disable the clock and free resources. As pci driver removal currently is not supported, set .suppress_bind_attrs to permit unbinding. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30PCI: mvebu: increment nports only for registered portsSebastian Hesselbarth1-3/+4
The number of ports is probed by counting the number of available child nodes. Later on, the registration of a port can fail and cause a mismatch between the ->nports counter and registered ports. This patch modifies the counting strategy, to make ->nports represent the number of registered ports instead of the number of available childs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30PCI: mvebu: move clock enable before register accessSebastian Hesselbarth1-13/+12
The clock passed to PCI controller found on MVEBU SoCs may come from a clock gate. This requires the clock to be enabled before any registers are accessed. Therefore, move the clock enable before register iomap to ensure it is enabled. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30PCI: mvebu: add support for MSIThomas Petazzoni1-0/+26
This commit adds support for Message Signaled Interrupts in the Marvell PCIe host controller. The work is very simple: it simply gets a reference to the msi_chip associated to the PCIe controller thanks to the msi-parent DT property, and stores this reference in the pci_bus structure. This is enough to let the Linux PCI core use the functions of msi_chip to setup and teardown MSIs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-29Merge 3.12-rc3 into driver-core-nextGreg Kroah-Hartman1-1/+7
We want the driver core and sysfs fixes in here to make merges and development easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-28PCI: Workaround missing pci_set_master in pci driversYinghai Lu1-1/+7
Ben Herrenschmidt found that commit 928bea964827 ("PCI: Delay enabling bridges until they're needed") breaks PCI in some powerpc environments. The reason is that the PCIe port driver will call pci_enable_device() on the bridge, so the device is enabled, but skips pci_set_master because pcie_port_auto and no acpi on powerpc. Because of that, pci_enable_bridge() later on (called as a result of the child device driver doing pci_enable_device) will see the bridge as already enabled and will not call pci_set_master() on it. Fixed by add checking in pci_enable_bridge, and call pci_set_master if driver skip that. That will make the code more robot and wade off problem for missing pci_set_master in drivers. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-27Merge branch 'pci/misc' into nextBjorn Helgaas8-78/+80
* pci/misc: PCI: Remove unused PCI_MSIX_FLAGS_BIRMASK definition PCI: acpiphp_ibm: Convert to dynamic debug PCI: acpiphp: Convert to dynamic debug PCI: Remove Intel Haswell D3 delays PCI: Pass type, width, and prefetchability for window alignment PCI: Document reason for using pci_is_root_bus() PCI: Use pci_is_root_bus() to check for root bus PCI: Remove unused "is_pcie" from pci_dev structure PCI: Update pci_find_slot() description in pci.txt [SCSI] qla2xxx: Use standard PCIe Capability Link register field names PCI: Fix comment typo, remove unnecessary !! in pci_is_pcie() PCI: Drop "setting latency timer" messages
2013-09-27Merge branch 'pci/host-tegra' into nextBjorn Helgaas1-2/+2
* pci/host-tegra: PCI: tegra: Add missing __iomem annotation
2013-09-27Merge branch 'pci/host-imx6' into nextBjorn Helgaas3-0/+582
* pci/host-imx6: PCI: imx6: Add support for i.MX6 PCIe controller ARM: imx6q: Add PCIe bits to GPR syscon definition
2013-09-27PCI: imx6: Add support for i.MX6 PCIe controllerSean Cross3-0/+582
Add support for the PCIe port present on the i.MX6 family of controllers. These use the Synopsis Designware core tied to their own PHY. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-09-27Merge branch 'pci/host-exynos' into nextBjorn Helgaas3-0/+366
* pci/host-exynos: PCI: exynos: Turn off power of phy block when link failed PCI: exynos: Add support for MSI MAINTAINERS: Add Jingoo Han as Samsung Exynos PCIe driver maintainer
2013-09-26PCI: convert bus code to use drv_groupsGreg Kroah-Hartman1-5/+8
The drv_attrs field of struct bus_type is going away soon, drv_groups should be used instead. This converts the PCI bus code to use the correct field. Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26PCI: convert bus code to use bus_groupsGreg Kroah-Hartman3-5/+15
The bus_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the PCI bus code to use the correct field. Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25PCI: acpiphp_ibm: Convert to dynamic debugLan Tianyu1-34/+24
This patch is to use pr_debug/info/warn/err to replace acpiphp_ibm debug functions and remove module's debug param. User interface change: before this patch, boot with the "acpiphp_ibm.debug" kernel parameter to turn on debug. After this patch, set CONFIG_DYNAMIC_DEBUG=y and boot with "acpiphp_ibm.dyndebug=+p" instead. See Documentation/dynamic-debug-howto.txt. [bhelgaas: changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25PCI: acpiphp: Convert to dynamic debugLan Tianyu3-40/+30
This patch is to use pr_debug/info/warn/err to replace acpiphp debug functions and remove module's debug param. User interface change: before this patch, boot with the "acpiphp.debug" kernel parameter to turn on debug. After this patch, set CONFIG_DYNAMIC_DEBUG=y and boot with "acpiphp.dyndebug=+p" instead. See Documentation/dynamic-debug-howto.txt. [bhelgaas: changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25PCI: tegra: Add missing __iomem annotationJingoo Han1-2/+2
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/pci/host/pci-tegra.c:411:41: warning: incorrect type in return expression (different address spaces) drivers/pci/host/pci-tegra.c:411:41: expected void [noderef] <asn:2>* drivers/pci/host/pci-tegra.c:411:41: got void *addr drivers/pci/host/pci-tegra.c:419:25: warning: incorrect type in return expression (different address spaces) drivers/pci/host/pci-tegra.c:419:25: expected void [noderef] <asn:2>* drivers/pci/host/pci-tegra.c:419:25: got void *addr Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thierry Reding <treding@nvidia.com>
2013-09-25PCI: exynos: Turn off power of phy block when link failedJingoo Han1-0/+68
When link failed, there is no need to turn on phy block. Also, turning on phy block is added, in order to turn on phy block regardless of the default value of phy registers. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25PCI: exynos: Add support for MSIJingoo Han3-0/+298
This patch adds support for Message Signaled Interrupt in the Exynos PCIe driver using Synopsys designware PCIe core IP. Signed-off-by: Siva Reddy Kallam <siva.kallam@samsung.com> Signed-off-by: Srikanth T Shivanand <ts.srikanth@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
2013-09-25PCI: Remove Intel Haswell D3 delaysTodd E Brandt1-0/+23
The latest Intel Haswell chipsets have a hardware optimization which allows on-chip PCI devices to ignore the 10ms delay before entering or exiting D3 suspend. This patch implements the optimization as a PCI quirk, since we want tight control over which devices use it. This way we can test each device individually to be sure there are no issues before we enable the quirk. The first set of devices are from the Haswell platform, which includes every PCI device that is on the northbridge and southbridge. This patch reduces the Haswell suspend time from 93 ms to 47 ms and resume time from 160 ms to 64 ms. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-25PCI: Pass type, width, and prefetchability for window alignmentWei Yang1-1/+1
When calculating window_alignment(), type information like IORESOURCE_MEM and IORESOURCE_PREFETCH may not be enough. For example, on powernv, we need to know whether the window is 64-bit or not. This patch passes the full resource type (res->flags) for window alignment. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-09-25PCI: Use pci_is_root_bus() to check for root busWei Yang1-1/+1
In __pci_bus_size_bridges() we check whether a bus is a root bus by testing bus->self. As indicated by commit 79af72d7 ("PCI: pci_is_root_bus helper"), bus->self == NULL is not a proper way to check for a root bus. One issue is that "virtual" buses added for SR-IOV (via virtfn_add_bus()) have bus->self == NULL but are not root buses. This patch changes it to pci_is_root_bus() to check whether it is a root bus. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25PCI: Remove unused "is_pcie" from pci_dev structureYijing Wang1-1/+0
No one uses "is_pcie" now; remove this obsolete member. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-25PCI: Drop "setting latency timer" messagesBjorn Helgaas1-1/+1
This message isn't useful any more, so drop it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60636 Reported-by: Oleksil Shevchuk <alxchk@gmail.com> Reference: http://lkml.kernel.org/r/CALCETrWkr53ZjqdN3t7rTTfr=+ZKZXJoYsuBcwPf0kN_33GfAw@mail.gmail.com Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-24PCI: Export pcie_set_mps() and pcie_get_mps()Yijing Wang1-0/+2
Export pcie_get_mps() and pcie_set_mps() functions so drivers can use them to simplify code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-23Merge branch 'pci/yijing-pci_is_pcie-v2' into nextBjorn Helgaas1-2/+1
* pci/yijing-pci_is_pcie-v2: powerpc/pci: Use pci_is_pcie() to simplify code [SCSI] qla2xxx: Use pcie_is_pcie() to simplify code [SCSI] csiostor: Use pcie_capability_clear_and_set_word() to simplify code [SCSI] bfa: Use pcie_set()/get_readrq() to simplify code x86/pci: Use cached pci_dev->pcie_cap to simplify code PCI: Use pci_is_pcie() to simplify code
2013-09-23PCI/ACPI: Name _OSC #defines more consistentlyBjorn Helgaas2-2/+2
Make PCI Host Bridge _OSC #defines more consistent. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24pci-acpi: convert acpi_get_handle() to acpi_has_method()Zhang Rui1-2/+1
acpi_has_method() is a new ACPI API introduced to check the existence of an ACPI control method. It can be used to replace acpi_get_handle() in the case that 1. the calling function doesn't need the ACPI handle of the control method. and 2. the calling function doesn't care the reason why the method is unavailable. Convert acpi_get_handle() to acpi_has_method() in drivers/pci/pci-acpi.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24acpi_pcihp: convert acpi_get_handle() to acpi_has_method()Zhang Rui1-5/+2
acpi_has_method() is a new ACPI API introduced to check the existence of an ACPI control method. It can be used to replace acpi_get_handle() in the case that 1. the calling function doesn't need the ACPI handle of the control method. and 2. the calling function doesn't care the reason why the method is unavailable. Convert acpi_get_handle() to acpi_has_method() in drivers/pci/hotplug/acpi_pcihp.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-23PCI: Use pci_is_pcie() to simplify codeYijing Wang1-2/+1
Use pci_is_pcie() instead of pci_find_capability() to simplify code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-20PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeupRafael J. Wysocki1-3/+3
Commit 448bd85 (PCI/PM: add PCIe runtime D3cold support) added a piece of code to pci_acpi_wake_dev() causing that function to behave in a special way for devices in D3cold (so that their configuration registers are not accessed before those devices are resumed). However, it didn't take the clearing of the pme_poll flag into account. That has to be done for all devices, even if they are in D3cold, or pci_pme_list_scan() will not know that wakeup has been signaled for the device and will poll its PME Status bit unnecessarily. Fix the problem by moving the clearing of the pme_poll flag in pci_acpi_wake_dev() before the code introduced by commit 448bd85. Reported-and-tested-by: David E. Box <david.e.box@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 3.6+ <stable@vger.kernel.org> # 3.6+
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-22/+0
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12Merge tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-14/+47
Pull ACPI and power management fixes from Rafael Wysocki: "All of these commits are fixes that have emerged recently and some of them fix bugs introduced during this merge window. Specifics: 1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events After the recent ACPIPHP changes we've seen some interesting breakage on a system that triggers device check notifications during boot for non-existing devices. Although those notifications are really spurious, we should be able to deal with them nevertheless and that shouldn't introduce too much overhead. Four commits to make that work properly. 2) Memory hotplug and hibernation mutual exclusion rework This was maent to be a cleanup, but it happens to fix a classical ABBA deadlock between system suspend/hibernation and ACPI memory hotplug which is possible if they are started roughly at the same time. Three commits rework memory hotplug so that it doesn't acquire pm_mutex and make hibernation use device_hotplug_lock which prevents it from racing with memory hotplug. 3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix The ACPI LPSS driver crashes during boot on Apple Macbook Air with Haswell that has slightly unusual BIOS configuration in which one of the LPSS device's _CRS method doesn't return all of the information expected by the driver. Fix from Mika Westerberg, for stable. 4) ACPICA fix related to Store->ArgX operation AML interpreter fix for obscure breakage that causes AML to be executed incorrectly on some machines (observed in practice). From Bob Moore. 5) ACPI core fix for PCI ACPI device objects lookup There still are cases in which there is more than one ACPI device object matching a given PCI device and we don't choose the one that the BIOS expects us to choose, so this makes the lookup take more criteria into account in those cases. 6) Fix to prevent cpuidle from crashing in some rare cases If the result of cpuidle_get_driver() is NULL, which can happen on some systems, cpuidle_driver_ref() will crash trying to use that pointer and the Daniel Fu's fix prevents that from happening. 7) cpufreq fixes related to CPU hotplug Stephen Boyd reported a number of concurrency problems with cpufreq related to CPU hotplug which are addressed by a series of fixes from Srivatsa S Bhat and Viresh Kumar. 8) cpufreq fix for time conversion in time_in_state attribute Time conversion carried out by cpufreq when user space attempts to read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state won't work correcty if cputime_t doesn't map directly to jiffies. Fix from Andreas Schwab. 9) Revert of a troublesome cpufreq commit Commit 7c30ed5 (cpufreq: make sure frequency transitions are serialized) was intended to address some known concurrency problems in cpufreq related to the ordering of transitions, but unfortunately it introduced several problems of its own, so I decided to revert it now and address the original problems later in a more robust way. 10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle. 11) cpufreq fixes related to system suspend/resume The recent cpufreq changes that made it preserve CPU sysfs attributes over suspend/resume cycles introduced a possible NULL pointer dereference that caused it to crash during the second attempt to suspend. Three commits from Srivatsa S Bhat fix that problem and a couple of related issues. 12) cpufreq locking fix cpufreq_policy_restore() should acquire the lock for reading, but it acquires it for writing. Fix from Lan Tianyu" * tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) cpufreq: Acquire the lock in cpufreq_policy_restore() for reading cpufreq: Prevent problems in update_policy_cpu() if last_cpu == new_cpu cpufreq: Restructure if/else block to avoid unintended behavior cpufreq: Fix crash in cpufreq-stats during suspend/resume intel_pstate: Add Haswell CPU models Revert "cpufreq: make sure frequency transitions are serialized" cpufreq: Use signed type for 'ret' variable, to store negative error values cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes cpufreq: Synchronize the cpufreq store_*() routines with CPU hotplug cpufreq: Invoke __cpufreq_remove_dev_finish() after releasing cpu_hotplug.lock cpufreq: Split __cpufreq_remove_dev() into two parts cpufreq: Fix wrong time unit conversion cpufreq: serialize calls to __cpufreq_governor() cpufreq: don't allow governor limits to be changed when it is disabled ACPI / bind: Prefer device objects with _STA to those without it ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks ACPI / hotplug / PCI: Use _OST to notify firmware about notify status ACPI / hotplug / PCI: Avoid doing too much for spurious notifies ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field. ACPI / hotplug / PCI: Don't trim devices before scanning the namespace ...
2013-09-10Merge branch 'acpi-pci-hotplug'Rafael J. Wysocki1-14/+47
* acpi-pci-hotplug: ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks ACPI / hotplug / PCI: Use _OST to notify firmware about notify status ACPI / hotplug / PCI: Avoid doing too much for spurious notifies ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
2013-09-09ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checksRafael J. Wysocki1-7/+25
In the current ACPIPHP notify handler we always go directly for a rescan of the parent bus if we get a device check notification for a device that is not a bridge. However, this obviously is overzealous if nothing really changes, because this way we may rescan the whole PCI hierarchy pretty much in vain. That happens on Alex Williamson's machine whose ACPI tables contain device objects that are supposed to coresspond to PCIe root ports, but those ports aren't physically present (or at least they aren't visible in the PCI config space to us). The BIOS generates multiple device check notifies for those objects during boot and for each of them we go straight for the parent bus rescan, but the parent bus is the root bus in this particular case. In consequence, we rescan the whole PCI bus from the top several times in a row, which is completely unnecessary, increases boot time by 50% (after previous fixes) and generates excess dmesg output from the PCI subsystem. Fix the problem by checking if we can find anything new in the slot corresponding to the device we've got a device check notify for and doing nothig if that's not the case. The spec (ACPI 5.0, Section 5.6.6) appears to mandate this behavior, as it says: Device Check. Used to notify OSPM that the device either appeared or disappeared. If the device has appeared, OSPM will re-enumerate from the parent. If the device has disappeared, OSPM will invalidate the state of the device. OSPM may optimize out re-enumeration. Therefore, according to the spec, we are free to do nothing if nothing changes. References: https://bugzilla.kernel.org/show_bug.cgi?id=60865 Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-07ACPI / hotplug / PCI: Use _OST to notify firmware about notify statusRafael J. Wysocki1-4/+17
The spec suggests that we should use _OST to notify the platform about the status of notifications it sends us, for example so that it doesn't repeate a notification that has been handled already. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-07ACPI / hotplug / PCI: Avoid doing too much for spurious notifiesRafael J. Wysocki1-3/+6
Sometimes we may get a spurious device check or bus check notify for a hotplug device and in those cases we should avoid doing all of the configuration work needed when something actually changes. To that end, check the return value of pci_scan_slot() in enable_slot() and bail out early if it is 0. This turns out to help reduce the amount of diagnostic output from the ACPIPHP subsystem and speed up boot on at least one system that generates multiple device check notifies for PCIe devices on the root bus during boot. Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-06Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds7-56/+1845
Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-2/+48
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05ACPI / hotplug / PCI: Don't trim devices before scanning the namespaceRafael J. Wysocki1-1/+0
In acpiphp_bus_add() we first remove device objects corresponding to the given handle and the ACPI namespace branch below it, which are then re-created by acpi_bus_scan(). This used to be done to clean up after surprise removals, but now we do the cleanup through trim_stale_devices() which checks if the devices in question are actually gone before removing them, so the device hierarchy trimming in acpiphp_bus_add() is not necessary any more and, moreover, it may lead to problems if it removes device objects corresponding to devices that are actually present. For this reason, remove the leftover acpiphp_bus_trim() from acpiphp_bus_add(). Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-03Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds25-1074/+1803
Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds5-685/+440
Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-08-30s390/pci: add recover sysfs knobSebastian Ott1-2/+0
Add an arch specific attribute to recover a pci function from an error state or config space blockage. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci/hotplug: convert to be builtin onlySebastian Ott2-60/+3
Convert s390' pci hotplug to be builtin only, with no module option. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-29Merge branch 'pci/misc' into nextBjorn Helgaas2-148/+145
* pci/misc: PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
2013-08-29PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resourceJulia Lawall1-21/+10
Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci Error-handling code was manually removed from the associated calls to platform_get_resource. Adjust the comment at the third platform_get_resource_byname to make clear why ioremap is not done at this point. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29PCI: exynos: Add I/O access wrappersSeungwon Jeon1-68/+90
This patch adds wrappers for MMIO access to ELBI, PHY, and other registers. No functional change. [bhelgaas: changelog] Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.