aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/perf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-10perf/smmuv3: Use platform_get_irq_optional() for wired interruptJohn Garry1-1/+1
Even though a SMMUv3 PMCG implementation may use an MSI as the form of interrupt source, the kernel would still complain that it does not find the wired (GSIV) interrupt in this case: root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found" [ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found [ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found [ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found [ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found [ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found [ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found [ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found [ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found Use platform_get_irq_optional() to silence the warning. If neither interrupt source is found, then the driver will still warn that IRQ setup errored and the probe will fail. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15perf/imx_ddr: Fix cpu hotplug state cleanupLeonard Crestez1-5/+11
This driver allocates a dynamic cpu hotplug state but never releases it. If reloaded in a loop it will quickly trigger a WARN message: "No more dynamic states available for CPU hotplug" Fix by calling cpuhp_remove_multi_state on remove like several other perf pmu drivers. Also fix the cleanup logic on probe error paths: add the missing cpuhp_remove_multi_state call and properly check the return value from cpuhp_state_add_instant_nocalls. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-10drivers/perf: hisi: Simplify hisi_read_sccl_and_ccl_id and its commentShaokun Zhang1-26/+32
hisi_read_sccl_and_ccl_id is not readable and its comment is a little confused, so simplify the function and its comment as Mark's suggestion. Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: John Garry <john.garry@huawei.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo1-3/+1
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-11-07drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platformShaokun Zhang1-8/+18
For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID are not satisfied with much rich topology when the MT is set, so we extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's update this for HiSilicon uncore PMU driver. Cc: John Garry <john.garry@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Dump AXI ID filter info to userspaceJoakim Zhang1-0/+56
caps/filter indicates whether HW supports AXI ID filter or not. caps/enhanced_filter indicates whether HW supports enhanced AXI ID filter or not. Users can check filter features from userspace with these attributions. Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [will: reworked cap switch to be less error-prone] Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Add driver for DDR PMU in i.MX8MPlusJoakim Zhang1-0/+5
Add driver for DDR PMU in i.MX8MPlus. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Add enhanced AXI ID filter supportJoakim Zhang1-21/+42
With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter which only can get bursts from DDR transaction, i.e. DDR read/write requests. This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW supports AXI ID filter which can get bursts and bytes from DDR transaction at the same time. We hope PMU always return bytes in the driver due to it is more meaningful for users. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-29drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.Ganapatrao Prabhakerrao Kulkarni1-33/+234
CCPI2 is a low-latency high-bandwidth serial interface for inter socket connectivity of ThunderX2 processors. CCPI2 PMU supports up to 8 counters per socket. Counters are independently programmable to different events and can be started and stopped individually. The CCPI2 counters are 64-bit and do not overflow in normal operation. Signed-off-by: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-28perf: arm-ccn: Enable stats for CCN-512 interconnectMarek Bykowski1-0/+1
Add compatible string for the ARM CCN-512 interconnect Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com> Signed-off-by: Boleslaw Malecki <boleslaw.malecki@tieto.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/smmuv3: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+2
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/arm-cci: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/arm-ccn: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-2/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf: xgene: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-10/+4
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf: hisi: use devm_platform_ioremap_resource() to simplify codeYueHaibing3-10/+3
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', 'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/coreWill Deacon7-38/+124
* for-next/52-bit-kva: (25 commits) Support for 52-bit virtual addressing in kernel space * for-next/cpu-topology: (9 commits) Move CPU topology parsing into core code and add support for ACPI 6.3 * for-next/error-injection: (2 commits) Support for function error injection via kprobes * for-next/perf: (8 commits) Support for i.MX8 DDR PMU and proper SMMUv3 group validation * for-next/psci-cpuidle: (7 commits) Move PSCI idle code into a new CPUidle driver * for-next/rng: (4 commits) Support for 'rng-seed' property being passed in the devicetree * for-next/smpboot: (3 commits) Reduce fragility of secondary CPU bringup in debug configurations * for-next/tbi: (10 commits) Introduce new syscall ABI with relaxed requirements for pointer tags * for-next/tlbi: (6 commits) Handle spurious page faults arising from kernel space
2019-08-28perf/imx_ddr: Add support for AXI ID filteringJoakim Zhang1-2/+72
AXI filtering is used by events 0x41 and 0x42 to count reads or writes with an ARID or AWID matching a specified filter. The filter is exposed to userspace as an (ID, MASK) pair, where each set bit in the mask causes the corresponding bit in the ID to be ignored when matching against the ID of memory transactions for the purposes of incrementing the counter. For example: # perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xff,axi_id=0x800/ cmd will count all read transactions from AXI IDs 0x800 - 0x8ff. If the 'axi_mask' is omitted, then it is treated as 0x0 which means that the 'axi_id' will be matched exactly. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate groups for global filteringRobin Murphy1-13/+34
With global filtering, it becomes possible for users to construct self-contradictory groups with conflicting filters. Make sure we cover that when initially validating events. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate group sizeRobin Murphy1-8/+14
Ensure that a group will actually fit into the available counters. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf: Remove dev_err() usage after platform_get_irq()Stephen Boyd5-17/+5
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf/imx_ddr: Add MODULE_DEVICE_TABLELeonard Crestez1-0/+1
This is required for automatic probing when driver is built as a module. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-29drivers/perf: arm_pmu: Fix failure path in PM notifierWill Deacon1-1/+1
Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM notifier code incorrectly skips restoration of the counters. Fix the logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT. Cc: <stable@vger.kernel.org> Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Reported-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-15docs: perf: move to the admin-guideMauro Carvalho Chehab1-1/+1
The perf infrastructure is used for userspace to track issues. At least a good part of what's described here is related to it. So, add it to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: perf: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the perf documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-08Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds5-2/+645
Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-06-27perf: arm_spe: Enable ACPI/Platform automatic module loadingJeremy Linton1-2/+10
Lets add the MODULE_TABLE and platform id_table entries so that the SPE driver can attach to the ACPI platform device created by the core pmu code. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27arm_pmu: acpi: spe: Add initial MADT/SPE probingJeremy Linton1-0/+72
ACPI 6.3 adds additional fields to the MADT GICC structure to describe SPE PPI's. We pick these out of the cached reference to the madt_gicc structure similarly to the core PMU code. We then create a platform device referring to the IRQ and let the user/module loader decide whether to load the SPE driver. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner7-28/+7
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13drivers/perf: imx_ddr: Add DDR performance counter support to perfFrank Li3-0/+563
Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-8/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-9/+1
Pull arm64 fixes from Will Deacon: - Fix SPE probe failure when backing auxbuf with high-order pages - Fix handling of DMA allocations from outside of the vmalloc area - Fix generation of build-id ELF section for vDSO object - Disable huge I/O mappings if kernel page table dumping is enabled - A few other minor fixes (comments, kconfig etc) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso: Explicitly add build-id option arm64/mm: Inhibit huge-vmap with ptdump arm64: Print physical address of page table base in show_pte() arm64: don't trash config with compat symbol if COMPAT is disabled arm64: assembler: Update comment above cond_yield_neon() macro drivers/perf: arm_spe: Don't error on high-order pages for aux buf arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-13drivers/perf: arm_spe: Don't error on high-order pages for aux bufWill Deacon1-9/+1
Since commit 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically"), the perf core tends to back aux buffer allocations with high-order pages with the order encoded in the PagePrivate data. The Arm SPE driver explicitly rejects such pages, causing the perf tool to fail with: | failed to mmap with 12 (Cannot allocate memory) In actual fact, we can simply treat these pages just like any other since the perf core takes care to populate the page array appropriately. In theory we could try to map with PMDs where possible, but for now, let's just get things working again. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23perf/arm-ccn: Clean up CPU hotplug handlingRobin Murphy1-12/+13
Like arm-cci, arm-ccn has the same issue of disabling preemption around operations which can take mutexes. Again, remove the definite bug by simply not trying to fight the theoretical races. And since we are touching the hotplug handling code, take the opportunity to streamline it, as there's really no need to store a full-sized cpumask to keep track of a single CPU ID. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23perf/arm-cci: Remove broken race mitigationRobin Murphy1-9/+12
Uncore PMU drivers face an awkward cyclic dependency wherein: - They have to pick a valid online CPU to associate with before registering the PMU device, since it will get exposed to userspace immediately. - The PMU registration has to be be at least partly complete before hotplug events can be handled, since trying to migrate an uninitialised context would be bad. - The hotplug handler has to be ready as soon as a CPU is chosen, lest it go offline without the user-visible cpumask value getting updated. The arm-cci driver has tried to solve this by using get_cpu() to pick the current CPU and prevent it from disappearing while both registrations are performed, but that results in taking mutexes with preemption disabled, which makes certain configurations very unhappy: [ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004 [ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 [ 1.983342] Preemption disabled at: [ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488 [ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1 [ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 1.983364] Call trace: [ 1.983369] dump_backtrace+0x0/0x158 [ 1.983372] show_stack+0x24/0x30 [ 1.983378] dump_stack+0x80/0xa4 [ 1.983383] ___might_sleep+0x138/0x160 [ 1.983386] __might_sleep+0x58/0x90 [ 1.983391] __rt_mutex_lock_state+0x30/0xc0 [ 1.983395] _mutex_lock+0x24/0x30 [ 1.983400] perf_pmu_register+0x2c/0x388 [ 1.983404] cci_pmu_probe+0x2bc/0x488 [ 1.983409] platform_drv_probe+0x58/0xa8 It is not feasible to resolve all the possible races outside of the perf core itself, so address the immediate bug by following the example of nearly every other PMU driver and not even trying to do so. Registering the hotplug notifier first should minimise the window in which things can go wrong, so that's about as much as we can reasonably do here. This also revealed an additional race in assigning the global pointer too late relative to the hotplug notifier, which gets fixed in the process. Reported-by: Li, Meng <Meng.Li@windriver.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04perf/smmuv3: Enable HiSilicon Erratum 162001800 quirkShameer Kolothum1-7/+41
HiSilicon erratum 162001800 describes the limitation of SMMUv3 PMCG implementation on HiSilicon Hip08 platforms. On these platforms, the PMCG event counter registers (SMMU_PMCG_EVCNTRn) are read only and as a result it is not possible to set the initial counter period value on event monitor start. To work around this, the current value of the counter is read and used for delta calculations. OEM information from ACPI header is used to identify the affected hardware platforms. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [will: update silicon-errata.txt and add reason string to acpi match] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04perf/smmuv3: Add MSI irq supportShameer Kolothum1-0/+58
This adds support for MSI-based counter overflow interrupt. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04perf/smmuv3: Add arm64 smmuv3 pmu driverNeil Leeder3-0/+783
Adds a new driver to support the SMMUv3 PMU and add it into the perf events framework. Each SMMU node may have multiple PMUs associated with it, each of which may support different events. SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page> where <phys_addr_page> is the physical page address of the SMMU PMCG wrapped to 4K boundary. For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840 Filtering by stream id is done by specifying filtering parameters with the event. options are: filter_enable - 0 = no filtering, 1 = filtering enabled filter_span - 0 = exact match, 1 = pattern match filter_stream_id - pattern to filter against Example: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1, filter_span=1,filter_stream_id=0x42/ -a netperf Applies filter pattern 0x42 to transaction events, which means events matching stream ids 0x42 & 0x43 are counted as only upper StreamID bits are required to match the given filter. Further filtering information is available in the SMMU documentation. SMMU events are not attributable to a CPU, so task mode and sampling are not supported. Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> [will: fold in review feedback from Robin] [will: rewrite Kconfig text and allow building as a module] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-10Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-2/+0
Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...
2019-02-06perf/aux: Make perf_event accessible to setup_aux()Mathieu Poirier1-3/+3
When pmu::setup_aux() is called the coresight PMU needs to know which sink to use for the session by looking up the information in the event's attr::config2 field. As such simply replace the cpu information by the complete perf_event structure and change all affected customers. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20190131184714.20388-2-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-31perf: xgene: Remove set but not used variable 'config'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/perf/xgene_pmu.c: In function 'xgene_perf_stop': drivers/perf/xgene_pmu.c:1055:6: warning: variable 'config' set but not used [-Wunused-but-set-variable] It never used since introduction. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-21perf/drivers: Strengthen exclusion checks with PERF_PMU_CAP_NO_EXCLUDEAndrew Murray3-20/+3
For drivers that do not support context exclusion let's advertise the PERF_PMU_CAP_NO_EXCLUDE capability. This ensures that perf will prevent us from handling events where any exclusion flags are set. Let's also remove the now unnecessary check for exclusion flags. This change means that qcom_{l2|l3}_pmu will now also indicate that they do not support exclude_{host|guest} and that xgene_pmu does not also support exclude_idle and exclude_hv. Note that for qcom_l2_pmu we now implictly return -EINVAL instead of -EOPNOTSUPP. This change will result in the perf userspace utility retrying the perf_event_open system call with fallback event attributes that do not fail. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-9-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-21For drivers that do not support context exclusion let's advertise theAndrew Murray8-38/+9
PERF_PMU_CAP_NO_EXCLUDE capability. This ensures that perf will prevent us from handling events where any exclusion flags are set. Let's also remove the now unnecessary check for exclusion flags. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-8-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-21perf/core, arch/arm: Use PERF_PMU_CAP_NO_EXCLUDE conditionallyAndrew Murray1-10/+5
The ARM PMU driver can be used to represent a variety of ARM based PMUs. Some of these PMUs do not provide support for context exclusion, where this is the case we advertise the PERF_PMU_CAP_NO_EXCLUDE capability to ensure that perf prevents us from handling events where any exclusion flags are set. Where an ARM PMU driver has the set_event_filter function implemented, we rely on it to perform exclusion checks. At present some of these functions do not test for all of the available exclude flags. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-6-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-04drivers/perf: hisi: Fixup one DDRC PMU register offsetShaokun Zhang1-2/+2
For DDRC PMU, each PMU counter is fixed-purpose. There is a mismatch between perf list and driver definition on rw_chg event. # perf list | grep chg hisi_sccl1_ddrc0/rnk_chg/ [Kernel PMU event] hisi_sccl1_ddrc0/rw_chg/ [Kernel PMU event] But the register offset of rw_chg event is not defined in the driver, meanwhile bnk_chg register offset is mis-defined, let's fixup it. Fixes: 904dcf03f086 ("perf: hisi: Add support for HiSilicon SoC DDRC PMU driver") Cc: stable@vger.kernel.org Cc: John Garry <john.garry@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Weijian Huang <huangweijian4@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-06drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driverKulkarni, Ganapatrao3-0/+871
This patch adds a perf driver for the PMU UNCORE devices DDR4 Memory Controller(DMC) and Level 3 Cache(L3C). Each PMU supports up to 4 counters. All counters lack overflow interrupt and are sampled periodically. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [will: consistent enum cpuhp_state naming] Signed-off-by: Will Deacon <will.deacon@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.