aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/phy/broadcom (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25phy: phy-brcm-usb: fixup BCM4908 supportRafał Miłecki3-1/+47
Just like every other family BCM4908 should get its own enum value. That is required to properly handle it in chipset conditional code. The real change is excluding BCM4908 from the PLL reprogramming code (see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908 reference clock frequency but: 1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL 2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices This change makes USB 3.0 PHY recognize e.g.: 1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode) 2. 1058:259f - Western Digital My Passport 259F Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that allow reading chip family and product ids. Such a block & register is missing on BCM4908 so this commit introduces "compatible" string specific binding. Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220218172459.10431-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllersAl Cooper1-8/+38
Add "wake on" support for the newer Synopsis based XHCI only controller. This works on the 72165 and 72164 and newer chips and does not work on 7216 based systems. Also switch the USB sysclk to a slower clock on suspend to save additional power in S2. The clock switch will only save power on the 72165b0 and newer chips and is a nop on older chips. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220215032422.5179-1-f.fainelli@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-23phy: broadcom: Kconfig: Fix PHY_BRCM_USB config optionAl Cooper1-2/+1
The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") added a second "default" line for ARCH_BCM_4908 above the original "default" line for ARCH_BRCMSTB. When two "default" lines are used, only the first is used and this change stopped the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB. The fix is to use one "default line with "||". Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-23phy: usb: Leave some clocks running during suspendAl Cooper1-0/+38
The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all). The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-25phy: bcm-ns-usb2: improve printing ref clk errorsRafał Miłecki1-1/+1
Improve message & use dev_err_probe() helper which prints actual error (helpful for debugging) and deals with -EPROBE_DEFER. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211123221521.25323-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: bcm-ns-usb2: support updated DT binding with PHY reg spaceRafał Miłecki1-9/+43
Updated DT binding maps just a PHY's register space instead of the whole DMU block. Accessing a common CRU reg is handled using syscon & regmap. The old binding has been deprecated and remains supported as a fallback method. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211026093716.5567-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-04Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-0/+4
Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc and other tiny driver subsystem updates for 5.16-rc1. Loads of things in here, all of which have been in linux-next for a while with no reported problems (except for one called out below.) Included are: - habanana labs driver updates, including dma_buf usage, reviewed and acked by the dma_buf maintainers - iio driver update (going through this tree not staging as they really do not belong going through that tree anymore) - counter driver updates - hwmon driver updates that the counter drivers needed, acked by the hwmon maintainer - xillybus driver updates - binder driver updates - extcon driver updates - dma_buf module namespaces added (will cause a build error in arm64 for allmodconfig, but that change is on its way through the drm tree) - lkdtm driver updates - pvpanic driver updates - phy driver updates - virt acrn and nitr_enclaves driver updates - smaller char and misc driver updates" * tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits) comedi: dt9812: fix DMA buffers on stack comedi: ni_usb6501: fix NULL-deref in command paths arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts ...
2021-10-24net: Convert more users of mdiobus_* to mdiodev_*Sean Anderson2-5/+3
This converts users of mdiobus to mdiodev using the following semantic patch: @@ identifier mdiodev; expression regnum; @@ - mdiobus_read(mdiodev->bus, mdiodev->addr, regnum) + mdiodev_read(mdiodev, regnum) @@ identifier mdiodev; expression regnum, val; @@ - mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val) + mdiodev_write(mdiodev, regnum, val) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01phy: broadcom: Kconfig: Add configuration menu for Broadcom phy driversCai Huoqing1-0/+4
Adding a configuration menu to hold many Broadcom phy drivers helps to make the menu display more concise. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210923025013.189-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-23Merge tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-nextGreg Kroah-Hartman1-3/+1
Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-14phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe()He Ying1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408090808.247368-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-14phy: usb: Fix misuse of IS_ENABLEDChen Li1-2/+2
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN. Signed-off-by: Chen Li <chenli@uniontech.com> Reviewed-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 94583a41047e ("phy: usb: Restructure in preparation for adding 7216 USB support") Link: https://lore.kernel.org/r/87czuggpra.wl-chenli@uniontech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb onlyRafał Miłecki1-1/+1
phy-brcm-usb has some conditional init code required on selected brcmstb devices. Execution of that code depends on family / product detected by brcmstb soc code. For ARCH_BCM4908 brcmstb soc code always return 0 values as ids. Don't bother selecting & compiling that redundant driver. Depends-on: 149ae80b1d50 ("soc: bcm: brcmstb: add stubs for getting platform IDs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210305152406.2588-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-10Merge tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-nextGreg Kroah-Hartman1-1/+1
Vinod writes: phy: second round of phy fixes for v5.11 - rockchip: init return and vednor prefix to dt-property - cpcap: bool conversion fix - lantiq: clock enable fix - lgm: kconfig depends on x86 - mediatek: add mising MODULE_DEVICE_TABLE() * tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: Add missing MODULE_DEVICE_TABLE() phy: phy-brcm-sata: remove unneeded semicolon phy: USB_LGM_PHY should depend on X86 phy: lantiq: rcu-usb2: wait after clock enable phy: rockchip: emmc, add vendor prefix to dts properties devicetree: phy: rockchip-emmc optional add vendor prefix phy: cpcap-usb: remove unneeded conversion to bool phy: rockchip-emmc: emmc_phy_init() always return 0
2021-02-04phy: phy-brcm-sata: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/phy/broadcom/phy-brcm-sata.c:654:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1612321087-14743-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: support PHY on the BCM4908Rafał Miłecki2-1/+6
BCM4908 seems to have slightly different registers but works when programmed just like the STB one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: specify init function format at struct levelRafał Miłecki1-4/+3
This is slightly cleaner solution that assures noone assings a wrong function to the pointer. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201216143305.12179-2-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: improve getting OF matching dataRafał Miłecki1-3/+4
1. Use of_device_get_match_data() helper to simplify the code 2. Check for NULL as a good practice Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201216143305.12179-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-09Merge tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-nextGreg Kroah-Hartman8-185/+48
Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...
2020-11-19phy: phy-bcm-ns-usb3: drop support for deprecated DT bindingRafał Miłecki1-151/+5
Initially this PHY driver was implementing MDIO access on its own. It was caused by lack of proper hardware design understanding. It has been changed back in 2017. DT bindings were changed and driver was updated to use MDIO layer. It should be really safe now to drop the old deprecated code. All Linux stored DT files don't use it for 3,5 year. There is close to 0 chance there is any bootloader with its own DTB using old the binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201113113423.9466-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: phy-brcm-sata: Allow configuration SATA AFE TX amplitudeFlorian Fainelli1-0/+32
Read the 'brcm,tx-amplitude-millivolt' property from Device Tree and propagate its value into the appropriate test transmit register to change the TX amplitude. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201022205056.233879-3-f.fainelli@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: broadcom: convert to devm_platform_ioremap_resource(_byname)Chunfeng Yun8-36/+13
Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/1604642930-29019-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-28phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211Al Cooper1-5/+0
The 7211a0 has a tca_drv_sel bit in the USB SETUP register that should never be enabled. This feature is only used if there is a USB Type-C PHY, and the 7211 does not have one. If the bit is enabled, the VBUS signal will never be asserted. In the 7211a0, the bit was incorrectly defaulted to on so the driver had to clear the bit. In the 7211c0 the state was inverted so the driver should no longer clear the bit. This hasn't been a problem because all current 7211 boards don't use the VBUS signal, but there are some future customer boards that may use it. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201002190115.48017-1-alcooperx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: phy-bcm-sr-usb: convert to readl_poll_timeout_atomic()Chunfeng Yun1-11/+8
Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1598320987-25518-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: phy-bcm-ns2-usbdrd: convert to readl_poll_timeout_atomic()Chunfeng Yun1-9/+4
Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1598320987-25518-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: phy-bcm-ns-usb3: convert to readl_poll_timeout_atomic()Chunfeng Yun1-13/+9
Use readl_poll_timeout_atomic() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1598320987-25518-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-21phy: bcm63xx-usbh: Add BCM63xx USBH driverÁlvaro Fernández Rojas3-0/+466
Add BCM63xx USBH PHY driver for BMIPS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Simon Arlott <simon@octiron.net> Link: https://lore.kernel.org/r/20200720131209.1236590-3-noltari@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-18drivers: phy: sr-usb: do not use internal fsm for USB2 phy initBharat Gooty1-53/+2
During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable. Hence do not use internal FSM programming sequence for the USB PHY initialization. Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver") Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: phy-bcm-ns2-usbdrd: Constify phy_opsRikard Falkeborn1-1/+1
phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 7831 3144 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o After: text data bss dec hex filename 7959 3016 128 11103 2b5f drivers/phy/broadcom/phy-bcm-ns2-usbdrd.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-2-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: phy-brcm-usb: Constify static structsRikard Falkeborn1-8/+8
A number of structs were not modified and can therefore be made const to allow the compiler to put them in read-only memory. In order to do so, update a few functions that don't modify there input to take pointers to const. Before: text data bss dec hex filename 15511 6448 64 22023 5607 drivers/phy/broadcom/phy-brcm-usb.o After: text data bss dec hex filename 16058 5936 64 22058 562a drivers/phy/broadcom/phy-brcm-usb.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-4-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-05-18phy: sr-usb: Constify phy_opsRikard Falkeborn1-1/+1
phy_ops are never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4310 1244 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o After: text data bss dec hex filename 4438 1116 0 5554 15b2 drivers/phy/broadcom/phy-bcm-sr-usb.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200516120441.7627-3-rikard.falkeborn@gmail.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-21phy: brcm-sata: Correct MDIO operations for 40nm platformsFlorian Fainelli1-83/+65
The logic to write to MDIO registers on 40nm platforms was wrong because it would use the port number as an offset from the base address rather than the bank address of the PHY. This is hardly noticeable because the only programming we do is enabling SSC or not, which is not really causing an observable functional change. Correct that mistake by passing down the struct brcm_sata_port structure down to the brcm_sata_mdio_wr() and brcm_sata_mdio_rd() functions and do the proper offsetting for 28nm, respectively 40nm platforms from there. This means that brcm_sata_pcb_base() is now useless and is therefore removed. Fixes: c1602a1a0fbe ("phy: phy_brcmstb_sata: add support for MIPS-based platforms") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-14phy: Enable compile testing for some of driversKrzysztof Kozlowski1-2/+2
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Add support for wake and USB low power mode for 7211 S2/S5Al Cooper4-34/+105
Add support for 7211 USB wake. Disable all possible 7211 USB logic for S2/S5 if USB wake is not enabled. On the 7211, the XHCI wake signal was not connected properly and only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register. The workaround is to have VPU code running that polls for the proper bit in the DIAG register and to wake the system when the bit is asserted. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: USB driver is crashing during S3 resume on 7216Al Cooper1-1/+1
This is a result of the USB 2.0 clocks not being disabled/enabled during suspend/resume on XHCI only systems. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: bdc: Fix occasional failure with BDC on 7211Al Cooper3-4/+38
The BDC "Read Transaction Size" needs to be changed from 1024 bytes to 256 bytes to prevent occasional transaction failures. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: PHY's MDIO registers not accessible without device installedAl Cooper1-0/+9
When there is no device connected and FSM is enabled, the XHCI puts the PHY into suspend mode. When the PHY is put into suspend mode the USB LDO powers down the PHY. This causes the MDIO to be inaccessible and its registers reset to default. The fix is to disable FSM. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: fix driver to defer on clk_get deferAl Cooper1-0/+6
Handle defer on clk_get because the new SCMI clock driver comes up after this driver. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Add support for new Synopsys USB controller on the 7211b0Al Cooper4-78/+295
The 7211b0 has added the STB XHCI Synopsys controller and it will be used instead of the RPi based DWC USB controller. The new Synopsys XHCI controller core is the same one that is used on the 7216, but because of the way the STB USB PHY is used on both the A0 and B0, some of the PHY control is different. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Add support for new Synopsys USB controller on the 7216Al Cooper4-18/+227
The 7216 has the new USB XHCI controller from Synopsys. While this new controller and the PHY are similar to the STB versions, the major differences are: - Many of the registers and fields in the CTRL block have been removed or changed. - A new set of Synopsys control registers, BCHP_USB_XHCI_GBL, were added. - MDIO functionality has been replaced with direct access registers in the BCHP_USB_XHCI_GBL block. - Power up PHY defaults that had to be changed by MDIO in previous chips will now power up with the correct defaults. A new init module was created for this new Synopsys USB controller. A new compatible string was added and the driver will dispatch into one of two init modules based on it. A "reg-names" field was added so the driver can more easily get optional registers. A DT bindings document was also added for this driver. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Restructure in preparation for adding 7216 USB supportAl Cooper3-123/+214
The driver is being restructured in preparation for adding support for the new Synopsys USB conroller on the 7216. Since all the bugs and work-arounds in previous STB chips are supposed to be fixed, most of the code in phy-brcm-usb-init.c is not needed. Instead of adding more complexity to the already complicated phy-brcm-usb-init.c module, the driver will be restructured to use a vector table to dispatch into different C modules for the different controllers. There was also some general cleanup done including some ipp setup code that was incorrect. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Add "wake on" functionalityAl Cooper3-3/+63
Add the ability to handle USB wake events from USB devices when in S2 mode. Typically there is some additional configuration needed to tell the USB device to generate the wake event when suspended but this varies with the different USB device classes. For example, on USB Ethernet dongles, ethtool should be used to enable the magic packet wake functionality in the dongle. NOTE: This requires that the "power/wakeup" sysfs entry for the USB device generating the wakeup be set to "enabled". This functionality requires a special hardware sideband path that will trigger the AON_PM_L2 interrupt needed to wake the system from S2 even though the USB host controllers are in IDDQ (low power state) and most USB related clocks are shut off. For the sideband signaling to work we need to leave the usbx_freerun clock running, but this clock consumes very little power by design. There's a bug in the XHCI wake hardware so only EHCI/OHCI wake is currently supported. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Put USB phys into IDDQ on suspend to save power in S2 modeAl Cooper2-4/+9
Currently the Phy driver will put the USB phys into the max power saving mode (IDDQ) when there is no corresponding XHCI, EHCI or OHCI client (through rmmod, unbind or if the driver is not builtin). This change will also put the Phys into IDDQ mode on suspend so that S2 will get the additional power savings. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: Get all drivers that use USB clks using correct enable/disableAl Cooper1-14/+14
The BRCM USB Phy, ohci, ehci and xhci drivers all use the USB clocks but not all drivers use the clk_prepare_enable/clk_disable_unprepare versions to enable/disable the clocks. This change gets all drivers using the prepare version. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 familyAl Cooper1-0/+13
When the EHCI controller received a 512 byte USB packet that had to be broken into 2 256 byte bursts across the SCB bus AND there was a following 512 byte USB packet, the second burst of data from the first packet was sometimes being lost. If the burst size was changed to 128 bytes via the EBR_SCB_SIZE field in the USB_CTRL_EBRIDGE register we'd see the 4th 128 byte burst of the first packet being lost. This problem became much worse if other threads were running that accessed memory, like a memcpy test. Setting the EBR_SCB_SIZE to 512, which prevents breaking the EHCI USB packet (max size of 512 bytes) into bursts, fixed the problem. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: brcm-sata: Implement 7216 initialization sequenceFlorian Fainelli1-0/+120
7216 is a 16nm process chip with a slightly different version of the PHY SerdDeS/AFE that requires a specific tuning sequence. Key on the compatible string to perform that initialization. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23phy: phy-brcm-usb-init: fix use of integer as pointerBen Dooks1-1/+1
The xhci_ec_base variable is a pointer, so don't compare it with an integer. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23phy: phy-brcm-usb-init: fix __iomem annotationsBen Dooks1-4/+4
The register address should have __iomem attributes so fix this to remove the following sparse warnings: drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: expected void [noderef] <asn:2> *reg drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: got void * drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-07-01Merge tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-nextGreg Kroah-Hartman1-1/+0
phy: for 5.3 *) Add a new PHY driver for Qualcomm PCIe2 PHY *) Add a new PHY driver for Mixel DPHY present in i.MX8 *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that PHY enable failed *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to calling a sleeping function from invalid context *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to imbalance powered flag *) Fix .cocci and sparse warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay phy: meson-g12a-usb3-pcie: disable locking for cr_regmap phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs dt-bindings: phy: Add documentation for mixel dphy dt-bindings: phy-pxa-usb: add bindings phy: renesas: rcar-gen3-usb2: fix imbalance powered flag phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting phy: qcom-qmp: Correct READY_STATUS poll break condition phy: ti: am654-serdes: Make serdes_am654_xlate() static phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings phy: samsung: Use struct_size() in devm_kzalloc() phy: qcom: Add Qualcomm PCIe2 PHY driver dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY
2019-07-01Merge tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-nextGreg Kroah-Hartman1-0/+8
Kishon writes: phy: for 5.2-rc *) Move Tegra124 PLL power supplies to be enabled by xusb-tegra124 *) Move Tegra210 PLL power supplies to be enabled by xusb-tegra210 *) Minor fixes: fix memory leaks at error path and addresses coverity. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: tegra: xusb: Add Tegra210 PLL power supplies phy: tegra: xusb: Add Tegra124 PLL power supplies dt-bindings: phy: tegra-xusb: List PLL power supplies phy: usb: phy-brcm-usb: Remove sysfs attributes upon driver removal phy: renesas: rcar-gen2: Fix memory leak at error paths phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.