aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/meson (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-12-29pinctrl: meson: fix gpio request disabling other modesNeil Armstrong1-1/+1
The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: meson: Add GXL pinctrl definitionsNeil Armstrong4-1/+601
Add support for the Amlogic Meson GXL SoC, this is a partially complete definition only based on the Amlogic Vendor tree. This definition differs a lot from the GXBB and needs a separate entry. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge tag 'v4.8-rc6' into develLinus Walleij1-7/+1
Linux 4.8-rc6
2016-09-15pinctrl: amlogic: gxbb: add i2c pinsJerome Brunet1-0/+30
Add EE domains pins for the i2c devices A,B,C Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add nand pinsJerome Brunet1-0/+23
Add EE domains pins for the NAND flash controller. Even tough we have no driver for the NAND flash controller yet, we need to have these pins in pinctrl as the actual pin are shared with the spifc controller. The bootloader on the S905-P200 setup pinmux for the NAND controller so we need the kernel to properly deactivate this if necessary. Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add spi nor pinsJerome Brunet1-0/+14
Add EE domains pins for the SPI flash controller Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: meson-gxbb: add the missing SDIO interrupt pinMartin Blumenstingl1-1/+3
This adds the SDIO interrupt pin which can be used by sd_emmc_a. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 29885a656511 ("pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller") Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controllerMartin Blumenstingl1-0/+19
sd_emmc_a is used a controller for the SDIO modules. This adds the pin configuration for the SDIO controller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-24pinctrl: meson-gxbb: add pins for PWMNeil Armstrong1-0/+79
Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: amlogic: gxbb: add the IR remote input pinMartin Blumenstingl1-0/+8
This adds the IR remote receiver to the AO domain devices. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: meson: get rid of unneeded domain structuresBeniamino Galvani5-228/+118
The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: meson: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun1-7/+1
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Fixes: e649f7ec8c5f ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add ethernet pinsKevin Hilman1-0/+39
Add EE domain pins for ethernet interface. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add more UART pinsKevin Hilman1-0/+48
Add EE domain pins for UART A, B & C. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add EMMC and SD pinsKevin Hilman1-0/+41
Add EE domain pins for eMMC and SD card. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add UART_AO_B, I2CKevin Hilman1-1/+34
Add pins for some more AO domain devices: UART_AO_B and I2C master & slave. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11pinctrl: meson: Fix eth_tx_en bit indexAlexander Müller1-1/+1
Fix pinctrl eth_tx_en bit index according to Hardkernel ODROID-C1 datasheet. Signed-off-by: Alexander Müller <serveralex@gmail.com> Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11pinctrl: amlogic: Add support for Amlogic Meson GXBB SoCCarlo Caione4-1/+443
This patch adds the basic platform file to support the pin controller found on the Amlogic Meson GXBB SoCs. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: meson: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan1-1/+1
Use devm_pinctrl_register() for pin control registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-01pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_mapIrina Tirdea1-1/+1
Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, since it does not depend on device tree despite the current name. This will enforce a consistent naming in pinctr-utils.c and will make it clear it can be called from outside device tree (e.g. from ACPI handling code). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09pinctrl: amlogic: Make driver independent from two-domain configurationCarlo Caione4-224/+228
In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8bCarlo Caione1-8/+27
Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09pinctrl: meson: make explicitly non-modularPaul Gortmaker1-7/+1
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_MESON drivers/pinctrl/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: meson: use gpiochip data pointerLinus Walleij1-11/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-24Merge tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds1-2/+2
Pull pin control updates from Linus Walleij: "Here is the bulk of pin control changes for the v4.2 series: Quite a lot of new SoC subdrivers and two new main drivers this time, apart from that business as usual. Details: Core functionality: - Enable exclusive pin ownership: it is possible to flag a pin controller so that GPIO and other functions cannot use a single pin simultaneously. New drivers: - NXP LPC18xx System Control Unit pin controller - Imagination Pistachio SoC pin controller New subdrivers: - Freescale i.MX7d SoC - Intel Sunrisepoint-H PCH - Renesas PFC R8A7793 - Renesas PFC R8A7794 - Mediatek MT6397, MT8127 - SiRF Atlas 7 - Allwinner A33 - Qualcomm MSM8660 - Marvell Armada 395 - Rockchip RK3368 Cleanups: - A big cleanup of the Marvell MVEBU driver rectifying it to correspond to reality - Drop platform device probing from the SH PFC driver, we are now a DT only shop for SuperH - Drop obsolte multi-platform check for SH PFC - Various janitorial: constification, grammar etc Improvements: - The AT91 GPIO portions now supports the set_multiple() feature - Split out SPI pins on the Xilinx Zynq - Support DTs without specific function nodes in the i.MX driver" * tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: rockchip: add support for the rk3368 pinctrl: rockchip: generalize perpin driver-strength setting pinctrl: sh-pfc: r8a7794: add SDHI pin groups pinctrl: sh-pfc: r8a7794: add MMCIF pin groups pinctrl: sh-pfc: add R8A7794 PFC support pinctrl: make pinctrl_register() return proper error code pinctrl: mvebu: armada-39x: add support for Armada 395 variant pinctrl: mvebu: armada-39x: add missing SATA functions pinctrl: mvebu: armada-39x: add missing PCIe functions pinctrl: mvebu: armada-38x: add ptp functions pinctrl: mvebu: armada-38x: add ua1 functions pinctrl: mvebu: armada-38x: add nand functions pinctrl: mvebu: armada-38x: add sata functions pinctrl: mvebu: armada-xp: add dram functions pinctrl: mvebu: armada-xp: add nand rb function pinctrl: mvebu: armada-xp: add spi1 function pinctrl: mvebu: armada-39x: normalize ref clock naming pinctrl: mvebu: armada-xp: rename spi to spi0 pinctrl: mvebu: armada-370: align spi1 clock pin naming pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet ...
2015-06-10pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada1-2/+2
Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19pinctrl: Fix gpio/pin mapping for Meson8bCarlo Caione2-3/+3
The num_pins field in the struct meson_domain_data must include also the missing pins in the Meson8b SoC, otherwise the GPIO <-> pin mapping is broken on this platform. Avoid also the dinamic allocation for GPIOs. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07pinctrl: Add support for Meson8bCarlo Caione4-1/+905
This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07documentation: Extend pinctrl docs for Meson8bCarlo Caione1-2/+3
Add the compatible string for Meson8b in Meson pinctrl documentation and add new information for Meson8b in source code comments. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-07pinctrl: Cleanup Meson8 driverCarlo Caione2-597/+461
This patch introduces a new PIN macro and few small modifications to simplify and shorten the Meson pinctrl drivers and cleanup the support file for the AmLogic Meson8 SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-26pinctrl: add driver for Amlogic Meson SoCsBeniamino Galvani4-0/+2061
This is a driver for the pinmux and GPIO controller available in Amlogic Meson SoCs. It currently supports only Meson8, however the common code should be generic enough to work also for other SoCs after having defined the proper set of functions and groups. GPIO interrupts are not supported at the moment due to lack of documentation. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.