aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-zynq.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-31pinctrl: zynq: fix UTF-8 errorsLinus Walleij1-2/+2
Fix up Sören's name in the Zynq driver. I caused this. I fix it. Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-30pinctrl: zynq: Initialize earlyMike Looijmans1-1/+11
Supplying pinmux configuration for e.g. gpio pins leads to deferred probes because the pinctrl device is probed much later than gpio. Move the init call to a much earlier stage so it probes before the devices that may need it. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-25pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grpMike Looijmans1-2/+2
Group names should be smc0_nand_grp and smc0_nor_grp, otherwise you'll get errors like this if you try to pinmux them via the devicetree: zynq-pinctrl 700.pinctrl: invalid group "smc0_nand_grp" for function "smc0_nand" Probably a typo while creating these tables. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada1-2/+2
Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02pinctrl: zynq: add static const to zynq_pctrl_groupsMasahiro Yamada1-1/+1
This array is only referenced in this file and never updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-02pinctrl: zynq: add static to zynq_pinsMasahiro Yamada1-1/+1
This array is only referenced in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01pinctrl: zynq: fix offset address for {SD0,SD1}_WP_CD_SELMasahiro Yamada1-4/+4
The address for SD0_WP_CD_SEL, SD1_WP_CD_SEL is 0xf8000830, 0xf8000834, respectively. Each offset address must be prefixed with 0x. Fixes: add958cee967 "pinctrl: Add driver for Zynq" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01pinctrl: zynq: fix DEFINE_ZYNQ_PINMUX_FUNCTION_MUX macroMasahiro Yamada1-1/+2
The offset to the mux register is missing. Fixes: add958cee967 "pinctrl: Add driver for Zynq" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19pinctrl: zynq: add static to platform_driver remove callbackMasahiro Yamada1-1/+1
This function is only referenced in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-06pinctrl: zynq: configure SPI SSx pins separatelyHelmut Buchsbaum1-7/+63
Since SCLK, MISO and MOSI are the only mandatory signals at Zynq's SPI interfaces, SS0, SS1 and SS2 have to be configured separately as they may be used as simple GPIO lines. This, of course, has to be considered in the devicetree, so pin controller configuration for e.g. an SPI0 using SS0 and SS1 only might look like the following snippet (derived from the example of chapter "17.5.3 MIO/EMIO" Routing of Zynq-7000 TRM UG585). So MIO20 can now be used as GPIO instead of being occupied by SPI0 SS2 function. Note the separate pinmux function for the slave select signals: pinctrl_spi0_default: spi0-default { mux_spi { function = "spi0"; groups = "spi0_0_grp"; }; mux_ss { function = "spi0_ss"; groups = "spi0_0_ss0_grp", "spi0_0_ss1_grp"; } conf-output { pins = "MIO16", "MIO21"; slew-rate = <0>; bias-disable; low-power-disable; io-standard = <1>; }; conf-input { pins = "MIO17"; slew-rate = <0>; bias-high-impedance; low-power-disable; io-standard = <1>; }; conf-select { pins = "MIO18", "MIO19"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; pinctrl_gpio0_default { mux { function = "gpio0"; groups = "gpio0_20_grp" }; conf { pins = "MIO20"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: hide PCONFDUMP in #ifdefArnd Bergmann1-0/+4
The zynq and qcom-spmi pinctrl drivers both use pin_config_item arrays to provide extra interfaces in debugfs. This structure and the PCONFDUMP macro are not defined if CONFIG_DEBUG_FS is turned off, so we get build errors like: pinctrl/qcom/pinctrl-spmi-gpio.c:139:37: error: array type has incomplete element type static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = { ^ pinctrl/qcom/pinctrl-spmi-gpio.c:140:2: error: implicit declaration of function 'PCONFDUMP' [-Werror=implicit-function-declaration] PCONFDUMP(PMIC_GPIO_CONF_PULL_UP, "pull up strength", NULL, true), ^ pinctrl/qcom/pinctrl-spmi-gpio.c:139:37: warning: 'pmic_conf_items' defined but not used [-Wunused-variable] static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = { Lacking any better idea to solve this nicely, this patch uses #ifdef to hide the structures, just like the pinctrl core does. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-30pinctrl: zynq: Fix usb0 pinsAndreas Färber1-1/+1
Fix usb0 pin 19 -> 29 (matching ethernet1 pins and manual). Pin 19 is used for ethernet0 on the Parallella board. Fixes: add958cee967 ("pinctrl: Add driver for Zynq") Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-14pinctrl: pinconf-generic: loose DT dependenceLinus Walleij1-4/+4
New pin controllers such as ACPI-based may also have custom properties to parse, and should be able to use generic pin config. Let's make the code compile on !OF systems and rename members a bit to underscore it is custom parameters and not necessarily DT parameters. This fixes a build regression for x86_64 on the zeroday kernel builds. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-and-tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-11pinctrl: Add driver for ZynqSoren Brinkmann1-0/+1176
This adds a pin-control driver for Zynq. Changes since v2: - driver-specific DT properties are passed to the core in two arrays, one for the actual DT parsing one for the debugfs representation. Issue a compiler warning when the number of entries is not the same for both arrays. Changes since v1: - fix EMIO_SD1_CD pin name - add USB to pinmux options changes since RFCv2: - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is present in DT but no driver available. - add #defines to get rid of magical constants - add commas at end of initializers - separate changes in mach-zynq in separate patch - add driver specific io-standard DT property - refactored pinconf set function to not require arguments for argument-less properties - squash other patches in - support for IO-standard property - support for low-power mode property - migration to pinconf_generic_dt_node_to_map_all() - use newly created infrastructure to add pass driver-specific DT params to pinconf-generic changes since RFC: - use syscon/regmap to access registers in SLCR space - rebase to 3.18: rename enable -> set_mux - add kernel-doc - support pinconf - supported attributes - pin-bias: pull up, tristate, disable - slew-rate: 0 == slow, 1 == fast; generic pinconf does not display argument Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.