aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2013-07-29sh-pfc: r8a7790: Remove deprecated Ethernet MII/RMII pinsShinya Kuribayashi1-130/+94
The pins have been removed from the datasheet, remove them here as well. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: r8a7790: Remove trailing '_TANS' string from RTS/CTS pinsShinya Kuribayashi1-10/+10
The RTS/CTS pins have been renamed in the datasheet, rename them here as well. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: r8a7790: Rename I2C SDA/SCL pinsShinya Kuribayashi1-104/+104
The I2C pins have been renamed in the datasheet, rename them here as well. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: r8a7779: Add I2C pin groupsPhil Edworthy1-0/+105
Add all I2C pin groups to R8A7779 PFC driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh73a0: Remove EXT_IRQ16L and EXT_IRQ16H macrosLaurent Pinchart1-36/+32
The macros expand to irq_pin() calls and where most probably introduced from a copy&paste of the sh7372 PFC data. Replace them with irq_pin(). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se>
2013-07-29sh-pfc: sh7372: Replace <mach/irqs.h> with <linux/sh_intc.h>Laurent Pinchart1-2/+1
The mach/irqs.h header is included only to get the evt2irq macro definition. The macro is defined in linux/sh_intc.h, include it directly instead of the mach-specific header. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se>
2013-07-29sh-pfc: Remove unneeded mach/<soc>.h includesLaurent Pinchart3-3/+0
The SoC-specific mach/<soc>.h headers are included needlesly. Don't include them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se>
2013-07-29sh-pfc: Support pins not associated with a GPIO portLaurent Pinchart5-18/+49
Pins with selectable functions but without a GPIO port can't be named PORT_# or GP_#_#. Add a SH_PFC_PIN_NAMED macro to declare such pins in the pinmux pins array, naming them with the PIN_ prefix followed by the pin physical position. In order to make sure not to register those pins as GPIOs, add a SH_PFC_PIN_CFG_NO_GPIO pin flag to denote pins without a GPIO port. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Compute pin ranges automaticallyLaurent Pinchart7-88/+88
Remove the manually specified ranges from PFC SoC data and compute the ranges automatically. This prevents ranges from being out-of-sync with pins definitions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Rename struct sh_pfc nr_pins field to nr_gpio_pinsLaurent Pinchart3-4/+4
The field contains the number of pins with an associated GPIO port. This is currently equal to the total number of pins but will be modified when adding support for pins without a GPIO port. Rename the field accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Add pin number to struct sh_pfc_pinLaurent Pinchart1-8/+12
The pin number is usually equal to the GPIO number but can differ when GPIO numbering is sparse. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Pass the pin number down to the port function macroLaurent Pinchart1-3/+3
The PORT_1 macro invokes a macro passed as a parameter. Pass the pin number down to that macro at the bottom of the call stack. This will be used to compute the pin ranges automatically. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Add port numbers to the CPU_ALL_PORT macroLaurent Pinchart5-112/+112
Pass down the port number down to the PORT_1 macro. The port number will be used to compute the pin ranges automatically. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Don't duplicate argument to PINMUX_GPIO macroLaurent Pinchart12-1420/+1418
The PINMUX_GPIO macro takes a port name and a data mark, respectively of the form GPIO_name and name_DATA. Modify the macro to take the name as a single argument and derive the port name and data mark from it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: shx3: Remove shx3_ prefix from static symbolsLaurent Pinchart1-14/+14
Unlike all other PFC SoC data, the shx3 data prefix all static symbols with shx3_. Remove the prefix to be consistent with the other source files. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7734: Use the common GP port style macrosLaurent Pinchart2-49/+20
The SoC has a bank-style PFC. Replace the custom-defined macros with common macros from sh-pfc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: Consolidate pin definition macrosLaurent Pinchart5-56/+36
Move the pin definition macros to a common header file. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Consolidate PFC SoC data macrosLaurent Pinchart9-214/+140
Move macros defined in several SoC data files to a common location and document them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Rename gpio arguments to be consistent with the rest of the codeLaurent Pinchart1-5/+5
The gpio_get_data_reg() and gpio_setup_data_reg() functions both take an argument named gpio. The argument contains a GPIO offset for the first function and a pin index for the second one. Rename them to offset and idx respectively to match the rest of the code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Replace pinmux_enum_id typedef with u16Laurent Pinchart21-46/+37
The typedef only conceals the real variable type without bringing any additional value (see Documentation/CodingStyle, section 5.b). Moreover, it polutes the pinmux namespace. Replace it with the integer type it used to hide. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Don't overallocate memory for the GPIO chip pins arrayLaurent Pinchart1-2/+2
The GPIO driver uses an array of sh_pfc_gpio_pin structures to store per-GPIO pin data. The array size is miscomputed at allocation time by using the number of the last pin instead of the number of pins. When the pin space contains holes this leads to memory overallocation. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Remove unused GPIO_PORT_ALL macroLaurent Pinchart3-16/+0
The macro isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Remove unneeded const keywordsLaurent Pinchart1-2/+2
Two integer field structures are needlesly defined as const. Remove the const keyword. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Remove unused macro and enum entriesLaurent Pinchart1-7/+0
The SH_PFC_MARK_INVALID macro and the PINMUX_FLAG_TYPE, GPIO_CFG_REQ and GPIO_CFG_FREE enum entries are used, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Remove unused PORT_DATA_* macrosLaurent Pinchart1-30/+0
Most of the PORT_DATA_* macros are not used, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: Remove unused input_pd and input_pu rangesLaurent Pinchart2-12/+0
The ranges are not used anymore, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
2013-07-29sh-pfc: shx3: Remove unused input_pu rangeLaurent Pinchart1-146/+124
The PFC SHX3 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SHX3 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7786: Remove unused input_pu rangeLaurent Pinchart1-140/+120
The PFC SH7786 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7786 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7785: Remove unused input_pu rangeLaurent Pinchart1-253/+222
The PFC SH7785 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7785 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7757: Remove unused input_pu rangeLaurent Pinchart1-170/+129
The PFC SH7757 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7757 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7724: Remove unused input_pu rangeLaurent Pinchart1-389/+342
The PFC SH7724 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7724 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7723: Remove unused input_pu rangeLaurent Pinchart1-23/+16
The PFC SH7723 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7723 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7722: Remove unused input_pd and input_pu rangesLaurent Pinchart1-241/+206
The PFC SH7722 SoC data contains input_pd and input_pu ranges used to configure pull-down and pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the ranges are thus not used anymore. Remove them. If required, configuring pull-down and pull-up resistors for the SH7722 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-29sh-pfc: sh7720: Remove unused input_pu rangeLaurent Pinchart1-248/+217
The PFC SH7720 SoC data contains a input_pu range used to configure pull-up resistors using the legacy non-pinconf API. That API has been removed from the driver, the range is thus not used anymore. Remove it. If required, configuring pull-up resistors for the SH7720 can be implemented using the pinconf API, as done for the SH-Mobile, R-Mobile and R-Car platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-07-25pinctrl: fix a memleak when freeing mapsLinus Walleij1-0/+1
We forgot to free the node itself when free:ing a map. Reported-by: xulinuxkernel <xulinuxkernel@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: pinctrl-imx: Remove unneeded check for platform_get_resource()Fabio Estevam1-3/+0
As devm_ioremap_resource() is used on probe, there is no need to explicitly check the return value from platform_get_resource(), as this is something that devm_ioremap_resource() takes care by itself. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: Remove duplicate code in pinctrl_pm_select_state functionsTony Lindgren1-28/+27
There's no need to duplicate essentially the same functions. Let's introduce static int pinctrl_pm_select_state() and make the other related functions call that. This allows us to add support later on for multiple active states, and more optimized dynamic remuxing. Note that we still need to export the various pinctrl_pm_select functions as we want to keep struct pinctrl_state private to the pinctrl code, and cannot replace those with inline functions. Cc: Felipe Balbi <balbi@ti.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl-baytrail: fix to avoid sparse warningsAndy Shevchenko1-4/+8
There are couple of sparse warnings we could avoid if we use a bit verbose version of the code in byt_gpio_direction_output(). drivers/pinctrl/pinctrl-baytrail.c:266:45: warning: dubious: x | !y drivers/pinctrl/pinctrl-baytrail.c:267:36: warning: dubious: x | !y Additionally simplify a bit the code in byt_gpio_direction_input(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl-baytrail: introduce to_byt_gpio() macroAndy Shevchenko1-8/+10
The introduced macro helps to convert struct gpio_chip to struct byt_gpio. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl-baytrail: remove redundant ptr variableAndy Shevchenko1-3/+1
There is no need to have an additional variable in byt_gpio_reg(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl-baytrail: change lvl to levelAndy Shevchenko1-3/+3
Additionally remove trailing whitespace when print triggering type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl-baytrail: fix indentationsAndy Shevchenko2-1/+2
There are two minor issues with indentation in the code. This patch fixes them. No functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: sirf: add freeze and restore entries for hibernation supportBarry Song1-0/+2
this patch adds hibernation entries so that the sirf platform can support suspend-to-disk. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-23pinctrl: sirf: fix the checkpatch issue about indentationRongjun Ying1-3/+3
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: pinctrl-single: fix compile warning when no CONFIG_PMJean-Francois Moine1-0/+2
This warning has been introduced by the commit 0f9bc4bcdf4f pinctrl: single: adopt pinctrl sleep mode management Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DTGuennadi Liakhovetski1-0/+1
The PFC pinctrl driver on sh73a0 is also regiatering a VccQ regulator for SDHI0. However, its consumers list only included the platform-data based SDHI device name. When booted with DT SDHI0 couldn't enable VccQ and therefore was unusable. Fix this by adding a consumer with DT-based name. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrlQipan Li1-0/+20
this patch adds the lost pin group which supports to let USP0 to simulate a UART without hardware flow control. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22pinctrl: sirf: fix the pin number and mux bit for usp0Qipan Li1-2/+2
we missed a pin and related mux bit for usp pin group, this patch fixes it. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-15pinctrl: don't use PTR_RET().Rusty Russell1-1/+1
We've already tested that it's an error. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds37-2680/+11174
Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.