aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2012-11-26Merge branch 'next/soc-exynos5440' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/socOlof Johansson3-0/+925
From Kukjin Kim: This is adding support for exynos5440, including Quad ARM Cortex-A15 cores and its reference board SSDK5440. Note, at this moment, just enabled minimal system part for initial kernel boot and pinctrl driver. * 'next/soc-exynos5440' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC ARM: dts: add initial dts file for EXYNOS5440, SSDK5440 ARM: EXYNOS: add support for EXYNOS5440 SoC Add/add conflict in arch/arm/boot/dts/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-24ARM: Kirkwood: support 98DX412x kirkwoods with pinctrlValentin Longchamp1-278/+290
The Marvell 98DX412x SoC embed a kirkwood variant that does not have pinctrl support yet. Even though this kirkwood is very similar to the 88f6281, on the MPP front a lot of pins are not available. That's why a new kirkwood pinctrl variant is needed. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24pinctrl: mvebu: Fix dove_audio1_ctrl_set functionAxel Lin1-0/+8
When setting audio1 pinmux the bits in the corresponding registers are not cleared. This fix first clears all bits and then sets the required bits according to the selected function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24pinctrl: mvebu: fix iomem pointer for dove pinctrlSebastian Hesselbarth1-7/+7
There has been a change in readl/writel to require registers addresses marked as IOMEM(). This patch takes care of this and also replaces ORing address offsets with adding them. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24pinctrl: samsung: Do not initialise statics to 0Sachin Kamat1-1/+1
Static variables are initialised to 0 by GCC. Fixes the following checkpatch error: ERROR: do not initialise statics to 0 or NULL FILE: pinctrl/pinctrl-samsung.c:50: static unsigned int pin_base = 0; Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-23pinctrl: pinctrl-single: Fix error check conditionSachin Kamat1-1/+1
*map should be tested for NULL instead of map. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-23pinctrl: SPEAr: Update error check for unsigned variablesTushar Behera1-1/+1
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-22pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoCThomas Abraham3-0/+925
Add a new pinctrl driver for Samsung EXYNOS5440 SoC. The pin controller module in EXYNOS5440 is different from the pin controller found on other Samsung SoC. Hence, the pin controller driver for EXYNOS5440 SoC is independent of the Samsung pinctrl framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21Merge branch 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dtOlof Johansson4-398/+480
From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * 'next/dt-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: EXYNOS: DT Support for SATA and SATA PHY ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats ARM: dts: Add node for touchscreen for exynos4210-trats ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats ARM: dts: Add node for i2c3 bus for exynos4210-trats ARM: dts: Add nodes for GPIO keys available on Trats ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats ARM: dts: Add nodes for pin controllers for exynos4x12 pinctrl: samsung: Add support for EXYNOS4X12 gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12 ARM: EXYNOS: Skip wakeup-int setup if pinctrl driver is used on EXYNOS4X12 ARM: dts: add board dts file for EXYNOS4412 based SMDK board ARM: dts: Add support for EXYNOS4X12 SoCs ARM: EXYNOS: Add devicetree node for TMU driver for exynos5 ARM: EXYNOS: Add devicetree node for TMU driver for exynos4 ARM: EXYNOS: Add MFC device tree support ARM: dts: Enable serial controllers on Origen and SMDKV310 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT ... Add/add conflicts in: arch/arm/boot/dts/exynos5250-smdk5250.dts arch/arm/boot/dts/exynos5250.dtsi arch/arm/mach-exynos/mach-exynos5-dt.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge branch 'samsung/pinctrl' into next/socOlof Johansson4-399/+481
From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * samsung/pinctrl: pinctrl: samsung: Update error check for unsigned variables pinctrl: samsung: Add support for EXYNOS4X12 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts pinctrl: samsung: Use one GPIO chip per pin bank pinctrl: exynos: Use one IRQ domain per pin bank pinctrl: samsung: Include bank-specific eint offset in bank struct pinctrl: samsung: Hold pointer to driver data in bank struct pinctrl: samsung: Match pin banks with their device nodes ARM: dts: exynos4210-pinctrl: Add nodes for pin banks pinctrl: samsung: Distinguish between pin group and bank nodes pinctrl: samsung: Remove static pin enumerations pinctrl: samsung: Assing pin numbers dynamically pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank pinctrl: samsung: Detect and handle unsupported configuration types
2012-11-21Merge branch 'at91' into develLinus Walleij1-1/+125
2012-11-21pinctrl: single: support gpio request and freeHaojian Zhuang1-2/+78
Marvell's PXA/MMP silicon also match the behavior of pinctrl-single. Each pin binds to one register. A lot of pins could be configured as gpio. GPIO range is defined as a child node of pinmux in .dtsi file. If those pins are with the same gpio function configuration in the pinmux register, they could be defined in the same GPIO range. For this new child node, two properties are used. reg = <the start of pinmux register in range, size of range> pinctrl-single,gpio: <gpio base in range, the gpio function of the range in the pinmux register> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: generic: add input schmitt disable parameterHaojian Zhuang1-0/+1
In Marvell PXA/MMP silicons, input schmitt disable value is 0x40, not 0. So append new config parameter -- input schmitt disable. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl/u300/coh901: stop spawning pinctrl from GPIOLinus Walleij1-6/+0
Let's stop spawning the pinctrl driver from the GPIO driver, we have these two mechanisms broken apart now, and they can each probe in isolation. If the GPIO driver cannot find its pin controller (pinctrl-u300), the pin controller core will tell it to defer probing. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl/u300/coh901: let the gpio_chip register the rangeLinus Walleij2-53/+49
Instead of having the pinctrl driver register the GPIO range for the gpio_chip, making it necessary to instantiate the pin controller from the GPIO driver and pass the GPIO chip as platform data, now let the GPIO chip driver register it's own ranges and have the pinctrl driver look up the GPIO chip from the pinctrl core as necessary. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: add function to retrieve range from pinLinus Walleij1-0/+24
This adds a function to the pinctrl core to retrieve the GPIO range associated with a certain pin for a certain controller. This is needed when a pinctrl driver want to look up the corresponding struct gpio_chip for a certain pin. As the GPIO drivers can now create these ranges themselves, the pinctrl driver no longer knows about all its associated GPIO chips. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: make range registration defer properlyLinus Walleij1-1/+6
This makes the pinctrl_find_and_add_gpio_range() return -EPROBE_DEFER if the range hosting pin controller cannot be located. We may assume that the common case for why adding a range fails is that the targe pin controller device has not probed yet. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21gpiolib: rename find_pinctrl_*Linus Walleij1-2/+2
Rename the function find_pinctrl_and_add_gpio_range() to pinctrl_find_and_add_gpio_range() so as to be consistent with the rest of the functions. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21Merge branch 'delivery/pinctrl-at91-3.8' of http://github.com/at91linux/linux-at91 into at91Linus Walleij1-1/+125
2012-11-19pinctrl: samsung: Update error check for unsigned variablesTushar Behera1-1/+1
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19pinctrl: samsung: Add support for EXYNOS4X12Tomasz Figa3-0/+113
This patch extends the driver with any necessary SoC-specific definitions to support EXYNOS4X12 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsungKukjin Kim4-398/+367
2012-11-19pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux option supportJean-Christophe PLAGNIOL-VILLARD1-0/+111
add : set_deglitch: enable/disable deglitch set_debounce: enable/disable debounce set_pulldown: enable/disable pulldown disable_schmitt_trig: disable schmitt trigger Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19pinctrl: at91: provide gpio namesJean-Christophe PLAGNIOL-VILLARD1-1/+14
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-15pinctrl: nomadik: Staticize non-exported symbolsAxel Lin1-14/+12
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: nomadik: Prevent NULL dereference if of_match_device returns NULLAxel Lin1-3/+8
of_match_device() may return NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: single: dump pinmux register valueHaojian Zhuang1-4/+4
Dump pinmux register value, not only function part in the pinmux register. Also fix the issue on caluclating pin offset. The last parameter should be pin number, not register offset. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15Pinctrl/spear: plgpio: don't call prepare/unprepareViresh Kumar1-4/+15
SPEAr SoC's don't do anything in clk_prepare() of plgpio driver, so there is no need to call this routine multiple times. Just call it once at probe. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: plgpio: Call clk_disable_unprepare only if clk_prepare_enable is calledAxel Lin1-1/+2
This driver allows clk_get() failure, and still work without it. This patch adds !IS_ERR(plgpio->clk) checking in plgpio_request() error path so we only call clk_disable_unprepare() if clk_prepare_enable() is called. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: spear: Make get_gpio_pingroup return NULL when no gpio_pingroup foundAxel Lin1-3/+3
Currently get_gpio_pingroup() may return NULL or ERR_PTR(-EINVAL) when no gpio_pingroup found. The caller in gpio_request_endisable() only checks if the return value is NULL. Return ERR_PTR(-EINVAL) for get_gpio_pingroup() causes problem and seems not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: coh901: Return proper error if irq_domain_add_linear() failsAxel Lin1-2/+4
Return -ENOMEM instead of 0 if irq_domain_add_linear fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: spear: Fix the logic of setting reg in pmx_init_gpio_pingroup_addrAxel Lin1-3/+3
Current code does not work if count > 1, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: imx: Fix the logic checking if not able to find pin reg mapAxel Lin1-1/+1
Current code sets "pin_reg = &info->pin_regs[i];" in each loop iteration, so in the case of no-match, pin_reg is not NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/samsung: don't allow enabling pinctrl-samsung standaloneArnd Bergmann1-1/+1
The main samsung pinctrl module references the specific exynos4210 pinctrl driver, which selects the main driver in Kconfig. Making the main driver a silent "bool" option avoid this potential build error if CONFIG_PINCTRL_SAMSUNG=y && CONFIG_PINCTRL_EXYNOS4=n: drivers/built-in.o:(.rodata+0x4e4): undefined reference to `exynos4210_pin_ctrl' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: tegra: Staticize non-exported symbolsAxel Lin1-10/+12
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/nomadik: db8540: split clkout groupPatrice Chotard1-5/+10
The clkout group is split into groups clkout1 and clkout2 which allows pins cklkout1 and clkout2 to be muxed separately. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/nomadik: db8500: split clkout groupPatrice Chotard1-7/+14
The clkout group is split into groups clkout1 and clkout2 which allows pins cklkout1 and clkout2 to be muxed separately. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: pxa3xx: Remove phy_base and phy_size from struct pxa3xx_pinmux_infoAxel Lin2-4/+0
They are not used, remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: pxa3xx: Use devm_request_and_ioremapAxel Lin1-8/+2
Use managed resources API to simplify the code. Also ensure we do request mem_region before ioremap. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: tegra: Make PINCTRL_TEGRA select PINMUX && PINCONFAxel Lin1-4/+2
Then we can remove "select PINMUX && PINCONF" from PINCTRL_TEGRA{20,30}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13pinctrl: mxs: Make PINCTRL_MXS select PINMUX && PINCONFAxel Lin1-4/+2
Then we can remove "select PINMUX && PINCONF" from PINCTRL_IMX{23,28}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13pinctrl: spear: Staticize non-exported symbolsAxel Lin1-5/+7
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: pinmux: Release all taken pins in pinmux_enable_setting error pathsAxel Lin1-7/+21
Currently pinmux_enable_setting does not release all taken pins if ops->enable() returns error. This patch ensures all taken pins are released in any error paths. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: lantiq: Staticize non-exported symbolsAxel Lin1-6/+6
Both ltq_pinctrl_dt_node_to_map() and ltq_pinctrl_dt_free_map() are not referenced outside of this file. Make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: lantiq: Remove ltq_pmx_disable() functionAxel Lin1-11/+0
Current code adds empty ltq_pmx_disable() because pinmux_check_ops() requires this callback to be defined. This is not required since commit 02b50ce4cb1 "pinctrl: make pinmux disable function optional". Thus remove ltq_pmx_disable() function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: SPEAr: Add SoC specific gpio configuration routinesShiraz Hashim3-14/+53
Different SPEAr SoCs have different approach to configure pins as gpios. Some configure a group of gpios with single register bit and others have one bit per gpio pin. Only earlier one is implemented till now, this patch adds support for later one. Here we add callbacks to SoC specific code to configure gpios in gpio_request_enable(). That will do additional SoC specific configuration to enable gpio pins. We also implement this callback for SPEAr1340 in this patch. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: Staticize pinconf_opsAxel Lin7-7/+7
They are not referenced outside respective driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: John Crispin <blogic@openwrt.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11Merge branch 'nomadik' into develLinus Walleij4-38/+184
2012-11-11Merge branch 'at91' into develLinus Walleij3-0/+1520
2012-11-11pinctrl: SPEAr: Add gpio ranges supportViresh Kumar8-17/+447
Most of SPEAr SoCs, which support pinctrl, can configure & use pads as gpio. This patch gpio enable support for SPEAr pinctrl drivers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.