aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/power/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-01-06power_supply: Add DA9052 battery driverAshish Jangam1-0/+7
Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver for definitions and methods. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-06bq20z75: Rename to sbs-batteryRhyland Klein1-4/+4
This driver for the bq20z75 implemented the register spec defined by the SBS standard. As this is not unique to this the TI part this was originally written for, we can generalize this driver to show its support for any SBS compliant battery. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04Merge branch 'power-supply-scope' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xenAnton Vorontsov1-0/+1
2012-01-04power_supply: Add LP8727 charger driverWoogyom Kim1-0/+6
National Semiconductor LP8727 is the battery charger with Micro/Mini USB interface. This IC includes below functions: - I2C interface for accessing user registers - Single input Li-Ion battery charger - Charger input ID detection from Micro/Mini USB - Multiplexing switches on USB, UART Signed-off-by: Woogyom Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Add initial Charger-Manager driverDonggeun Kim1-0/+10
Because battery health monitoring should be done even when suspended, it needs to wake up and suspend periodically. Thus, userspace battery monitoring may incur too much overhead; every device and task is woken up periodically. Charger Manager uses suspend-again to provide in-suspend monitoring. This patch allows to monitor battery health in-suspend state. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-02um: switch to use of drivers/KconfigAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-07-31Merge git://git.infradead.org/battery-2.6Linus Torvalds1-0/+14
* git://git.infradead.org/battery-2.6: gpio-charger: Fix checking return value of request_any_context_irq power_supply: MAX17042: Support additional properties max8903_charger: Allow platform data to be __initdata power_supply: Add charger driver for MAX8998/LP3974 power_supply: Add charger driver for MAX8997/8966 max17042_battery: Remove obsolete cleanup for clientdata twl4030_charger: Fix warnings wm831x_power: Support multiple instances wm831x_backup: Support multiple instances apm_power: Fix style error in macros s3c_adc_battery: Fix annotation for s3c_adc_battery_probe() bq20z75: Enable detection after registering bq20z75: Add support for external notification
2011-07-08power_supply: Add charger driver for MAX8998/LP3974Donggeun Kim1-0/+7
This patch supports power supply APIs for MAX8998/LP3974. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: Add charger driver for MAX8997/8966Donggeun Kim1-0/+7
MAX8997/8966 chip is a multi-function device which includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery charging control. The driver for it is located at drivers/mfd. This patch supports battery charging control of MAX8997/8966 chip and provides power supply class information to userspace. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-05-27Merge git://git.infradead.org/battery-2.6Linus Torvalds1-0/+9
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
2011-05-26w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC supportClifton Barnes1-0/+7
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-22max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)Anton Vorontsov1-0/+1
S390 is special as it doesn't have IRQ lines, so these errors pop up: drivers/built-in.o: In function 'max8903_remove': drivers/power/max8903_charger.c:355: undefined reference to 'free_irq' drivers/power/max8903_charger.c:357: undefined reference to 'free_irq' drivers/power/max8903_charger.c:359: undefined reference to 'free_irq' This commit fixes the issue by making the driver depend on GENERIC_HARDIRQS feature. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-20power_supply: Add driver for MAX8903 chargerMyungJoo Ham1-0/+8
MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-02-22bq27x00: Add bq27000 supportLars-Peter Clausen1-0/+14
This patch adds support for the bq27000 battery to the bq27x00 driver. The bq27000 is similar to the bq27200 except that it uses the HDQ bus instead of I2C to communicate with the host system. The driver is implemented as a platform driver. The driver expects to be provided with a read callback function through its platform data. The read function is assumed to do the lowlevel HDQ handling and read out the value of a certain register. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2011-01-14power_supply: Add MAX17042 Fuel Gauge DriverMyungJoo Ham1-0/+10
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-18power_supply: Add gpio charger driverLars-Peter Clausen1-0/+10
This patch adds a simple driver for chargers indicating their online status through a GPIO pin. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-29power: Revert "power_supply: Mark twl4030_charger as broken"Samuel Ortiz1-1/+0
The missing definitions are now in. This reverts commit 23886839a752401aba66517bff8a8b91549279ce. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-28power_supply: Mark twl4030_charger as brokenAnton Vorontsov1-0/+1
The driver is not buildable without MFD changes. For now, let's disable the driver as it breaks build for major platforms (i.e. x86). CC [M] drivers/power/twl4030_charger.o drivers/power/twl4030_charger.c: In function 'twl4030_clear_set_boot_bci': drivers/power/twl4030_charger.c:105: error: 'TWL4030_PM_MASTER_BOOT_BCI' undeclared (first use in this function) drivers/power/twl4030_charger.c:105: error: (Each undeclared identifier is reported only once drivers/power/twl4030_charger.c:105: error: for each function it appears in.) drivers/power/twl4030_charger.c: In function 'twl4030_bci_have_vbus': drivers/power/twl4030_charger.c:137: error: 'TWL4030_PM_MASTER_STS_HW_CONDITIONS' undeclared (first use in this function) drivers/power/twl4030_charger.c: In function 'twl4030_bci_probe': drivers/power/twl4030_charger.c:477: warning: overflow in implicit constant conversion drivers/power/twl4030_charger.c:485: warning: overflow in implicit constant conversion make[2]: *** [drivers/power/twl4030_charger.o] Error 1 We can re-enable it if MFD tree will finally merge into 2.6.37. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-30power_supply: Add driver for TWL4030/TPS65950 BCI chargerGrazvydas Ignotas1-0/+6
TWL4030/TPS65950 is a multi-function device with integrated charger, which allows charging from AC or USB. This driver enables the charger and provides several monitoring functions. Tested on OMAP3 Pandora board. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-23ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependencyMartin Schwidefsky1-2/+1
Fix this Kconfig warning on allmodconfig for s390: warning: (BATTERY_DS2760 && POWER_SUPPLY) selects W1 which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-06power_supply: Add driver for TI BQ20Z75 gas gauge ICRhyland Klein1-0/+7
This driver depends on I2C and uses SMBUS for communication with the host. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-19power_supply: Add isp1704 charger detection driverHeikki Krogerus1-0/+7
NXP ISP1704 is Battery Charging Specification 1.0 compliant USB transceiver. This adds a power supply driver for ISP1704 and ISP1707 USB transceivers. Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-12Merge git://git.infradead.org/battery-2.6Linus Torvalds1-0/+13
* git://git.infradead.org/battery-2.6: intel_mid_battery: Fix battery scaling intel_mid_battery: Fix the argument order to intel_scu_ipc_command olpc_battery: Fix build failure caused by sysfs changes Add s3c-adc-battery driver Intel MID platform battery driver Fix up trivial conflicts (battery drivers added from different branches) in drivers/power/{Kconfig,Makefile}
2010-08-05POWER: Add JZ4740 battery driver.Lars-Peter Clausen1-0/+11
Add support for the battery voltage measurement part of the JZ4740 ADC unit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-23Add s3c-adc-battery driverVasily Khoruzhick1-0/+6
s3c-adc-battery is driver for monitoring and charging battery on iPAQ H1930/H1940/RX1950. It depends on s3c-adc driver to get battery voltage and current. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-17Intel MID platform battery driverNithish Mahalingam1-0/+7
The PMIC Battery driver provides battery charging and battery gauge functionality on Intel MID platforms. This provides the basic functions. There are some USB drivers to merge before the selection of charging between the different USB power levels can be enabled. Moved to a platform device by Alek Du. Signed-off-by: Nithish Mahalingam <nithish.mahalingam@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-18power_supply: Add test_power driverAnton Vorontsov1-0/+5
Just a handy driver that is used for testing purposes. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-26ds2782_battery: Add support for ds2786 battery gas gaugeYulia Vilensky1-2/+2
Signed-off-by: Yulia Vilensky <vilensky@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-06Driver for Zipit Z2 battery chipMarek Vasut1-0/+6
This patch adds driver for Zipit Z2 battery chip called AER915. No details are known about the chip. The chip is available through I2C bus at address 0x55 and it's register 0x02 contains battery voltage. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-03-07power_supply: Enable power supply of max8925Haojian Zhuang1-0/+7
MAX8925 is a PMIC that contains charger component Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-02-16power_supply: bq27x00: add BQ27500 supportGrazvydas Ignotas1-2/+2
BQ27500 is newer fuel gauge chip from TI with slightly changed register layout and some different register semantics. Add new i2c ID for it and handle differences where needed. Also rename bq27200 functions to bq27x00, as they are no longer bq27200 specific. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-12-15Merge git://git.infradead.org/battery-2.6Linus Torvalds1-0/+7
* git://git.infradead.org/battery-2.6: power_supply_sysfs: Handle -ENODATA in a special way wm831x_backup: Remove unused variables gta02: Set pcf50633 charger_reference_current_ma pcf50633: Query charger status directly pcf50633: Properly reenable charging when the supply conditions change pcf50633: Get rid of charging restart software auto-triggering pcf50633: introduces battery charging current control pcf50633: Add ac power supply class to the charger wm831x: Factor out WM831x backup battery charger
2009-11-27collie: add battery driverThomas Kunze1-0/+7
This driver is based on tosa_battery.c.
2009-11-16wm831x: Factor out WM831x backup battery chargerMark Brown1-0/+7
The backup battery on WM831x is a separate IP block to the main PMU and is largely unrelated to the main supply functionality. Factor it out into a separate driver in order to reflect this and better support future hardware versions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-09-04power_supply: Add driver for the PMU on WM831x PMICsMark Brown1-0/+7
The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-07-01Add ds2782 battery gas gauge driverRyan Mallon1-0/+7
This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-09Add MAX17040 Fuel Gauge driverMinkyu Kang1-0/+8
The MAX17040 is a I2C interfaced Fuel Gauge systems for lithium-ion batteries This patch adds support the MAX17040 Fuel Gauge Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-01-11power_supply: PCF50633 battery charger driverBalaji Rao1-0/+6
Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add Dialog DA9030 battery charger driverMike Rapoport1-0/+7
Driver for battery charger integrated into Dialog Semiconductor DA9030 PMIC Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add support for WM8350 PMUMark Brown1-0/+7
This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-18Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Anton Vorontsov1-4/+4
Conflicts: drivers/power/Makefile
2008-10-12Fix Kconfig dependency for WM97xx battery driverLinus Torvalds1-1/+1
It needs the WM97xx touchscreen driver to be compiled in, not as a module. And it cannot itself be a module, due to some unfortunate interactions with platform data. Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02[ARM] 5248/1: wm97xx generic battery driverMarek Vašut1-4/+4
This patch adds generic battery driver for wm97xx chips. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26power_supply: fix dependency of tosa_batteryDmitry Baryshkov1-1/+1
tosa_battery should also depend on wm97xx_ts as it uses dac-accessing functions from that module. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-01power_supply: Support for Texas Instruments BQ27200 battery managersRodolfo Giometti1-0/+6
These battery managers came in two different packages: one for I2C busses (BQ27200) and one for HDQ busses (BQ27000). This driver currently supports only the I2C chip version but the code is designed in order to easily allow the HDQ chip version integration. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make things static, use kasprintf()] Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-07-30Merge branch 'master' of /home/cbou/linux-2.6Anton Vorontsov1-0/+6
Conflicts: drivers/power/Kconfig drivers/power/Makefile
2008-07-10[ARM] 5155/1: PalmTX battery monitorMarek Vašut1-0/+6
This patch adds battery monitoring driver for PalmTX. It can read voltage from the battery and temperature. It also monitors charging/discharging status. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01power_supply: Sharp SL-6000 (tosa) batteries supportDmitry Baryshkov1-0/+7
This patch adds common battery interface support for Sharp SL-6000 (tosa). Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2007-07-23Don't compile the PMU power driver on 64-bit PowerPCPaul Mackerras1-1/+1
As reported by Stephen Rothwell, an allmodconfig build on 64-bit PowerPC reports these errors: ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined! ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined! ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined! This fixes the problem by not building pmu_battery.ko on ppc64. There are no battery-powered ppc64 machines with an Apple PMU, and we can be reasonably confident there never will be. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-15PDA_POWER depends on having request_irq()Al Viro1-0/+1
... so all proud owners of s390-based PDAs will have to live without that one Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.