aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-vt8500.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-25pwm: vt8500: Undo preparation of a clock source.Arvind Yadav1-0/+1
Undo preparation of a clock source if vt8500_pwm_probe() is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-19pwm: constify pwm_ops structuresBhumika Goyal1-1/+1
Declare pwm_ops structures as const as they are only stored in the ops field of a pwm_chip structure. This field is of type const struct pwm_ops *, so pwm_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct pwm_ops i@p={...}; @ok1@ identifier r1.i; position p; struct pxa_pwm_chip pwm; struct bfin_pwm_chip bwm; struct vt8500_chip vp; struct imx_chip icp; @@ ( pwm.chip.ops=&i@p | bwm.chip.ops=&i@p | vp.chip.ops=&i@p | icp.chip.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct pwm_ops i; File size details: text data bss dec hex filename 1646 328 0 1974 7b6 drivers/pwm/pwm-imx.o 1742 224 0 1966 7ae drivers/pwm/pwm-imx.o 1941 296 0 2237 8bd drivers/pwm/pwm-pxa.o 2037 192 0 2229 8b5 drivers/pwm/pwm-pxa.o 1946 296 0 2242 8c2 drivers/pwm/pwm-vt8500.o 2050 192 0 2242 8c2 drivers/pwm/pwm-vt8500.o The drivers/pwm/pwm-bfin.o file did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-20pwm: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-28pwm: vt8500: Remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-18drivers/pwm: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-02-26Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds1-15/+72
Pull PWM changes from Thierry Reding: "A new driver has been added to support the PWM mode of the timer counter blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained suspend and resume functionality. User drivers can now query the core for whether access to a PWM device will sleep (if the PWM chip is on a slow bus such as I2C or SPI). The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state in addition to the FB layer's blanking states. To round things off, a few fixes and cleanups are also included" * tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: twl: Use to_twl() instead of container_of() pwm: tegra: assume CONFIG_OF pwm_backlight: Validate dft_brightness in main probe function pwm: Export pwm_{set,get}_chip_data() pwm: Make Kconfig entries more consistent pwm: Add can_sleep property to drivers pwm: Add pwm_can_sleep() as exported API to users pwm-backlight: handle BL_CORE_FBBLANK state pwm: pwm-tiecap: Low power sleep support pwm: pwm-tiehrpwm: Low power sleep support pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver pwm: vt8500: Add polarity support pwm: vt8500: Register write busy test performed incorrectly pwm: atmel: add Timer Counter Block PWM driver
2013-01-22pwm: Convert to devm_ioremap_resource()Thierry Reding1-3/+3
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-09pwm: vt8500: Add polarity supportTony Prisk1-0/+23
Add support to set polarity on PWM devices, allowing for inverted duty cycles. Also update the binding document to #pwm-cells = <3> to allow passing the flags from devicetree. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-09pwm: vt8500: Register write busy test performed incorrectlyTony Prisk1-15/+49
Correct operation for register writes is to perform a busy-wait after writing the register. Currently the busy wait it performed before, meaning subsequent register writes to bitfields may occur before the previous field has been updated. Also, all registers are defined as 32-bit read/write. Change pwm_busy_wait() to use readl rather than readb. Improve readability of code with defines for registers and bitfields. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-22pwm: vt8500: Ensure PWM clock is enabled during pwm_configTony Prisk1-2/+12
This patch corrects a bug reported by Peter Vasil. When all PWMs are disabled, PWM module may be disabled during calls to pwm_config. This patch enables/disables the clock in pwm_config to ensure the module is active before register read/ writes. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Tested-by: Peter Vasil <petervasil@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-22pwm: vt8500: Fix build errorTony Prisk1-1/+1
A missing '{' causes a build error in pwm-vt8500.c Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-01pwm: vt8500: Update vt8500 PWM driver supportTony Prisk1-23/+63
This patch updates pwm-vt8500.c to support devicetree probing and make use of the common clock subsystem. A binding document describing the PWM controller found on arch-vt8500 is also included. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-08-17pwm: vt8500: Fix coding style issueSachin Kamat1-1/+1
Fixes the following: WARNING: Prefer pr_warn(... to pr_warning(... pr_warning("Waiting for status bits 0x%x to clear timed out\n", Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm: Convert pwm-vt8500 to use devm_* APIsAxel Lin1-39/+8
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-02ARM vt8500: Move vt8500 pwm driver to pwm frameworkSascha Hauer1-0/+208
Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.