aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pwm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-11-01pwm: samsung: Fix kernel warning while unexporting a channelSachin Kamat1-1/+1
PWM channel data was set to NULL before freeing it. This caused the following kernel warning while unexporting the channel. Set the channel data to NULL after freeing it. [ 70.495000] WARNING: CPU: 0 PID: 1 at drivers/base/devres.c:805 pwm_put+0x48/0x80() [ 70.505000] Modules linked in: [ 70.505000] CPU: 0 PID: 1 Comm: sh Not tainted 3.12.0-rc6-next-20131024-00012-gd4aec04-dirty #58 [ 70.515000] [<c0014ddc>] (unwind_backtrace+0x0/0xf4) from [<c0011784>] (show_stack+0x10/0x14) [ 70.525000] [<c0011784>] (show_stack+0x10/0x14) from [<c03a3cbc>] (dump_stack+0x7c/0xb0) [ 70.530000] [<c03a3cbc>] (dump_stack+0x7c/0xb0) from [<c001de68>] (warn_slowpath_common+0x6c/0x88) [ 70.540000] [<c001de68>] (warn_slowpath_common+0x6c/0x88) from [<c001df20>] (warn_slowpath_null+0x1c/0x24) [ 70.550000] [<c001df20>] (warn_slowpath_null+0x1c/0x24) from [<c01d1af8>] (pwm_put+0x48/0x80) [ 70.560000] [<c01d1af8>] (pwm_put+0x48/0x80) from [<c01d21c8>] (pwm_unexport_store+0x94/0xac) [ 70.565000] [<c01d21c8>] (pwm_unexport_store+0x94/0xac) from [<c010991c>] (sysfs_write_file+0x148/0x1d8) [ 70.575000] [<c010991c>] (sysfs_write_file+0x148/0x1d8) from [<c00b2a80>] (vfs_write+0xb4/0x1a0) [ 70.585000] [<c00b2a80>] (vfs_write+0xb4/0x1a0) from [<c00b3068>] (SyS_write+0x3c/0x78) [ 70.595000] [<c00b3068>] (SyS_write+0x3c/0x78) from [<c000e2e0>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-17pwm: add ep93xx PWM supportH Hartley Sweeten3-0/+240
Remove the non-standard EP93xx PWM driver in drivers/misc and add a new driver for the PWM controllers on the EP93xx platform based on the PWM framework. These PWM controllers each support 1 PWM channel with programmable duty cycle, frequency, and polarity inversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-15pwm: don't use devm_pinctrl_get_select_default() in probeWolfram Sang2-12/+0
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: imx: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: lpc32xx: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: mxs: Remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: twl: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: twl-led: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: samsung: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: imx: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-19pwm: atmel-tcb: fix max time computation for slow clk sourceBoris BREZILLON1-1/+1
Use the the tcb counter width to compute the maximum time that can be represented using the slow clock source instead of the static 16 bit width. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-19pwm: atmel-tcb: add missing clk source configBoris BREZILLON1-0/+2
Clock source changes are never applied to the CMR register. This may lead to wrong period/duty cycle configuration. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-06Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-222/+487
Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-03pwm: pxa: Use module_platform_driverMike Dunn1-11/+1
Commit 76abbdde2d95a3807d0dc6bf9f84d03d0dbd4f3d pwm: Add sysfs interface causes a kernel oops due to a null pointer dereference on PXA platforms. This happens because the class added by the patch is registered in a subsys_initcall (initcall4), but the pxa pwm driver is registered in arch_initcall (initcall3). If the class is not registered before the driver probe function runs, the oops occurs in device_add() when the uninitialized pointers in struct class are dereferenced. I don't see a reason that the driver must be an arch_initcall, so this patch makes it a regular module_platform_driver (initcall6), preventing the oops. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: tiehrpwm: add missing __iomem annotationJingoo Han1-3/+3
Fix the following sparse warnings: drivers/pwm/pwm-tiehrpwm.c:144:16: warning: incorrect type in argument 1 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:144:16: expected void const volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:144:16: got void * drivers/pwm/pwm-tiehrpwm.c:149:9: warning: incorrect type in argument 2 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:149:9: expected void volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:149:9: got void * drivers/pwm/pwm-tiehrpwm.c:157:18: warning: incorrect type in argument 1 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:157:18: expected void const volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:157:18: got void * drivers/pwm/pwm-tiehrpwm.c:160:9: warning: incorrect type in argument 2 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:160:9: expected void volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:160:9: got void * Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context()Jingoo Han1-1/+1
ecap_pwm_save_context() and ecap_pwm_restore_context() are only used when CONFIG_PM_SLEEP is selected. drivers/pwm/pwm-tiecap.c:293:13: warning: 'ecap_pwm_save_context' defined but not used [-Wunused-function] drivers/pwm/pwm-tiecap.c:302:13: warning: 'ecap_pwm_restore_context' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: simplify use of devm_ioremap_resourceJulia Lawall3-14/+1
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: renesas-tpu: Add DT supportLaurent Pinchart1-7/+34
Specify DT bindings for the TPU PWM controller and add OF support to the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: Use the DT macro directly when parsing PWM DT flagsLaurent Pinchart1-4/+3
Don't redefine a PWM_SPEC_POLARITY macro with a value identical to PWM_POLARITY_INVERTED, use the PWM DT macro directly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: mxs: Check the return value from stmp_reset_block()Fabio Estevam1-1/+7
stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-12pwm: Remove superseded pwm-samsung-legacy driverTomasz Figa2-354/+0
This patch removes the now unused pwm-samsung-legacy driver, which was replaced by new pwm-samsung driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-12pwm: Add new pwm-samsung driverTomasz Figa2-0/+619
This patch introduces new Samsung PWM driver, which is completely rewritten to be multiplatform- and DeviceTree-aware. In addition, remaining problems of old driver are fixed, such as: - proper handling of hardware variants, - synchronization on SMP systems, - handling of boundary parameter values, - hardware sharing with PWM clocksource driver, - undefined state of PWM output after stopping PWM channel. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-06pwm: samsung: Rename to pwm-samsung-legacyTomasz Figa2-1/+1
This patch renames the old pwm-samsung driver to pwm-samsung-legacy to create place for the new, rewritten, DT-aware pwm-samsung driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-07-29pwm: convert class code to use dev_groupsGreg Kroah-Hartman1-9/+12
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the PWM class code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare.Marek Belisko1-2/+11
This was found when using pwm-led on am33xx and enable heartbeat trigger. [ 808.624876] ================================= [ 808.629443] [ INFO: inconsistent lock state ] [ 808.634021] 3.9.0 #2 Not tainted [ 808.637415] --------------------------------- [ 808.641981] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 808.648288] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 808.653494] (prepare_lock){+.?.+.}, at: [<c027c211>] clk_unprepare+0x15/0x24 [ 808.661040] {SOFTIRQ-ON-W} state was registered at: [ 808.666155] [<c004ec4d>] __lock_acquire+0x411/0x824 [ 808.671465] [<c004f359>] lock_acquire+0x41/0x50 [ 808.676412] [<c039ee9d>] mutex_lock_nested+0x31/0x1d8 [ 808.681912] [<c027c275>] clk_prepare+0x15/0x28 [ 808.686764] [<c0590c6b>] _init+0x117/0x1e0 [ 808.691256] [<c0019ef9>] omap_hwmod_for_each+0x29/0x3c [ 808.696842] [<c0591107>] __omap_hwmod_setup_all+0x17/0x2c [ 808.702696] [<c0008653>] do_one_initcall+0xc3/0x10c [ 808.708017] [<c058a627>] kernel_init_freeable+0xa7/0x134 [ 808.713778] [<c039a543>] kernel_init+0x7/0x98 [ 808.718544] [<c000cd95>] ret_from_fork+0x11/0x3c [ 808.723583] irq event stamp: 1379172 [ 808.727328] hardirqs last enabled at (1379172): [<c03a0759>] _raw_spin_unlock_irqrestore+0x21/0x30 [ 808.736828] hardirqs last disabled at (1379171): [<c03a03c3>] _raw_spin_lock_irqsave+0x13/0x38 [ 808.745876] softirqs last enabled at (1379164): [<c002ae5d>] irq_enter+0x49/0x4c [ 808.753747] softirqs last disabled at (1379165): [<c002aec3>] irq_exit+0x63/0x88 [ 808.761518] [ 808.761518] other info that might help us debug this: [ 808.768373] Possible unsafe locking scenario: [ 808.768373] [ 808.774578] CPU0 [ 808.777141] ---- [ 808.779705] lock(prepare_lock); [ 808.783186] <Interrupt> [ 808.785929] lock(prepare_lock); [ 808.789595] [ 808.789595] *** DEADLOCK *** [ 808.789595] [ 808.795805] 1 lock held by swapper/0: [ 808.799643] #0: (((&heartbeat_data->timer))){+.-...}, at: [<c002e204>] call_timer_fn+0x0/0x90 [ 808.808814] [ 808.808814] stack backtrace: [ 808.813402] [<c000ff19>] (unwind_backtrace+0x1/0x98) from [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) [ 808.823721] [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) from [<c004e595>] (mark_lock+0x18d/0x434) [ 808.833669] [<c004e595>] (mark_lock+0x18d/0x434) from [<c004ec1d>] (__lock_acquire+0x3e1/0x824) [ 808.842803] [<c004ec1d>] (__lock_acquire+0x3e1/0x824) from [<c004f359>] (lock_acquire+0x41/0x50) [ 808.852031] [<c004f359>] (lock_acquire+0x41/0x50) from [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) [ 808.861433] [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) from [<c027c211>] (clk_unprepare+0x15/0x24) [ 808.870930] [<c027c211>] (clk_unprepare+0x15/0x24) from [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) [ 808.880431] [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) from [<c019f29f>] (pwm_disable+0x27/0x28) [ 808.889751] [<c019f29f>] (pwm_disable+0x27/0x28) from [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) [ 808.899431] [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) from [<c002e249>] (call_timer_fn+0x45/0x90) [ 808.909288] [<c002e249>] (call_timer_fn+0x45/0x90) from [<c002e399>] (run_timer_softirq+0x105/0x17c) [ 808.918884] [<c002e399>] (run_timer_softirq+0x105/0x17c) from [<c002abc5>] (__do_softirq+0xa5/0x150) [ 808.928486] [<c002abc5>] (__do_softirq+0xa5/0x150) from [<c002aec3>] (irq_exit+0x63/0x88) [ 808.937098] [<c002aec3>] (irq_exit+0x63/0x88) from [<c000d599>] (handle_IRQ+0x21/0x54) [ 808.945415] [<c000d599>] (handle_IRQ+0x21/0x54) from [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) [ 808.954900] [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) from [<c000c7ff>] (__irq_svc+0x3f/0x64) [ 808.964287] Exception stack(0xc05b1f68 to 0xc05b1fb0) [ 808.969587] 1f60: 00000001 00000001 00000000 00000000 c05b0000 c0619748 [ 808.978158] 1f80: c05b0000 c05b0000 c0619748 413fc082 00000000 00000000 01000000 c05b1fb0 [ 808.986719] 1fa0: c004f989 c000d6f0 400f0033 ffffffff [ 808.992024] [<c000c7ff>] (__irq_svc+0x3f/0x64) from [<c000d6f0>] (cpu_idle+0x60/0x98) [ 809.000250] [<c000d6f0>] (cpu_idle+0x60/0x98) from [<c058a535>] (start_kernel+0x1e9/0x234) Remove non atomic clk api calls and use only atomic for enable/disable because can be called from atomic context (led_heartbeat_function is timer callback). Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: pca9685: Fix wrong argument to set MODE1_SLEEP bitAxel Lin1-2/+3
Current code actually does not set MODE1_SLEEP bit because the new value for bitmask (0x1) is wrong. To set MODE1_SLEEP bit, we should pass MODE1_SLEEP as the new value for bitmask. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: renesas-tpu: Add MODULE_ALIAS to make module auto loading workAxel Lin1-0/+1
This driver can be built as module, add MODULE_ALIAS to make module auto loading work. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-25pwm: renesas-tpu: fix return value check in tpu_probe()Wei Yongjun1-4/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add Renesas TPU PWM driverLaurent Pinchart3-0/+486
The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add sysfs interfaceH Hartley Sweeten4-2/+380
Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: Fill in missing .owner fieldsThierry Reding9-0/+9
Some drivers don't set the .owner fields of the struct device_driver or struct pwm_ops, which causes the module usage count to become wrong. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: add pca9685 driverSteffen Trumtrar3-0/+308
Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: atmel-tcb: prepare clk before calling enableBoris BREZILLON1-2/+2
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-10pwm: devm: alloc correct pointer sizeWolfram Sang1-2/+2
The allocated object should be the size of what the pointer is pointing to and not the size of the pointer itself. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-27pwm: mxs: Let device core handle pinctrlFabio Estevam1-6/+0
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: <linux-kernel@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-18drivers/pwm: don't check resource with devm_ioremap_resourceWolfram Sang8-40/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-04-23pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_configAxel Lin1-2/+5
lpc32xx_pwm_config() is supposed to set duty_ns and period_ns, it should not change PWM_ENABLE bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-23pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]Axel Lin1-2/+16
According to the LPC32x0 User Manual [1]: For both PWM1 and PWM2 Control Registers: BIT 31: This bit gates the PWM_CLK signal and enables the external output pin to the PWM_PIN_STATE logical level. 0 = PWM disabled. (Default) 1 = PWM enabled So in lpc32xx_pwm_enable(), we should set PWM_ENABLE bit. In lpc32xx_pwm_disable(), we should just clear PWM_ENABLE bit rather than write 0 to the register which will also clear PWMx_RELOADV and PWMx_DUTY bits. [1] http://www.nxp.com/documents/user_manual/UM10326.pdf Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-23pwm: Constify OF match tablesThierry Reding6-6/+6
A few drivers already annotate this properly. Make the same change for all other OF supporting drivers. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-04-02pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chipAxel Lin1-1/+0
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: pxa: Remove PWM_ID_BASE macroAxel Lin1-4/+3
PWM_ID_BASE() is not used after convert to PWM framework, remove it. Also update driver_data field of struct platform_device_id accordingly. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: spear: Remove unused *dev from struct spear_pwm_chipAxel Lin1-3/+0
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: mxs: Remove unused *dev from struct mxs_pwm_chipAxel Lin1-2/+0
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: twl: Return proper error if twl6030_pwm_enable() failsAxel Lin1-1/+1
Return proper error instead of 0 if twl6030_pwm_enable() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chipAxel Lin1-14/+2
clk_enable/clk_disable maintain an enable_count, clk_prepare and clk_unprepare also maintain a prepare_count. These APIs will do prepare/enable when the first user calling these APIs, and do disable/unprepare when the corresponding counter reach 0. Thus We don't need to maintain a clk_enabled counter here. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: imx: Remove enabled field from struct imx_chipAxel Lin1-5/+1
We can test PWMF_ENABLED bit to know if pwm is enabled or not. Thus remove enabled field from struct imx_chip. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: twl: Add .owner to struct pwm_opsAxel Lin1-0/+2
Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: twl-led: Add .owner to struct pwm_opsAxel Lin1-0/+2
Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: atmel-tcb: Add .owner to struct pwm_opsAxel Lin1-0/+1
Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-02pwm: ab8500: Add .owner to struct pwm_opsAxel Lin1-0/+1
Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.