aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rapidio (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2009-12-06ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driverDmitry Artamonow1-0/+2
Many features of h3100/h3600 (LCD, PCMCIA, Flash write, etc.) depend on correct functioning of GPIO expander handled by htc-egpio driver, so force its building in Kconfig. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5825/1: SA1100: h3600: update defconfigDmitry Artamonow1-364/+612
Update defconfig to current kernel, enable support for iPAQ H3100 and following drivers: gpio-keys, htc-egpio, ide_cs. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100Dmitry Artamonow2-2/+2
Both iPAQs h3600 and h3100 share the same control GPIOs for PCMCIA, so driver can be reused. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keysDmitry Artamonow1-1/+38
Add support for "Power" and "Action" (joystick center) buttons - the only buttons on iPaq h3100/h3600 connected to GPIOs (other buttons are controlled by microcontroller) Also remove setting PWER for wakeup on Power button press - gpio-keys driver will handle it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5822/1: SA1100: h3100/h3600: clean up #includesDmitry Artamonow3-49/+2
After a code reorganization and following split, there's some #includes now unused. Clean them up and sort remaining alphabetticaly where possible. Compile tested. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplatesDmitry Artamonow4-64/+27
Correct boilerplates after files split. Also shorten them a bit - use standart GPL wording (as per http://lkml.org/lkml/2007/5/1/220) and drop changelog, which only entry about h3800 support and abstracted EGPIOs is just confusing now, as both of these features are gone. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5820/1: SA1100: h3100/h3600: split h3600.cDmitry Artamonow5-335/+427
Split common h3600.c into three separate files: h3100.c, h3600.c and h3xxx.c (the latter contains common code for h3100/h3600) Copyright boilerplates and #includes are copied intact and will be cleaned up later. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.hDmitry Artamonow4-43/+15
Combine both headers into one, rename to h3xxx.h and change all users accordingly. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitionsDmitry Artamonow2-48/+7
As all existing code was converted to gpiolib, drop no more used pre-gpiolib (bit-shifted) GPIO definintions. Supply new gpiolib-friendly definitions for GPIOs which don't have them yet. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputsDmitry Artamonow1-23/+3
After conversion to gpiolib there's still some GPIOs left, that get configured in *_mach_init() as outputs (using direct operations on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly sound related and should be configured by corresponding driver once it is written. Drop this initialisation and configure all GPIOs as input. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitionsDmitry Artamonow2-14/+0
As all the remaining users of these definitions (in pcmcia/sa1100_h3600 driver) were converted to gpio_to_irq(), they can be safely removed. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlersDmitry Artamonow3-184/+0
As all users of assign_h3600_egpio now converted to gpiolib, we can safely remove all assign_h3600_egpio handling code and definitions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolibDmitry Artamonow2-18/+126
Use of gpio_request/gpio_free in some callbacks may look ugly, but corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet) init/exit hooks and registering these gpios in *_mach_init is also not possible, because htc-gpio driver starts a bit later... Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driverDmitry Artamonow2-0/+69
It will be used for future conversion of assign_h3600_egpio calls to gpiolib. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpersDmitry Artamonow1-9/+20
h3100 and h3600 have different sets of LCD-controlling gpios, which mapped to the same "abstracted" EGPIO. As we plan to get rid of those abstracted egpios completely, we need to separate these helper functions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolibDmitry Artamonow1-11/+71
Convert all operations with GPLR/GPCR/GPSR to gpiolibs calls. Also change all IRQ_GPIO* to gpio_to_irq(*GPIO*) Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pinsDmitry Artamonow1-3/+1
sa1100_fb driver handles this Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.hDmitry Artamonow1-8/+0
PM_SUSPEND, PM_RESUME and machine_is_h3xxx() are not used anywhere in kernel (checked with git grep), so it's safe to remove them. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5796/1: SA1100: h3600: remove IRDA bits from serial PM callbackDmitry Artamonow1-4/+1
IRDA is handled by separate sa1100-ir driver and has nothing to do with sa1100_serial Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5797/1: SA1100: h3100/h3600: remove dead links from Kconfig help textDmitry Artamonow1-2/+0
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5795/1: SA1100: h3100/h3600: mark *_mach_init functions as __initDmitry Artamonow1-3/+3
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: no need to set PWER_RTCRussell King1-1/+1
The rtc-sa1100 driver takes care of this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: move serial port support functionsRussell King2-26/+52
No point calling sa1100_register_uart_fns early - these aren't used until late in the boot sequence. Also convert to gpiolib support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: convert H3100 IrDA to use generic gpio supportRussell King2-3/+17
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: provide a way to setup platform-controlled GPIOsRussell King1-0/+42
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: separate IrDA machine specificsRussell King1-21/+41
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: h3600: provide each iPAQ machine type with own init functionRussell King1-2/+12
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: sa11x0: convert set_xxx_data() to register_xxx()Russell King13-40/+42
Only register devices if we have platform data for those which require platform data. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-05avr32: Convert BUG() to use unreachable()David Daney1-1/+1
Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-05s390: Convert BUG() to use unreachable()David Daney1-1/+1
Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: linux390@de.ibm.com CC: linux-s390@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-05MIPS: Convert BUG() to use unreachable()David Daney1-3/+1
Use the new unreachable() macro instead of while(1); Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> CC: linux-mips@linux-mips.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-05x86: Convert BUG() to use unreachable()David Daney1-2/+2
Use the new unreachable() macro instead of for(;;);. When allyesconfig is built with a GCC-4.5 snapshot on i686 the size of the text segment is reduced by 3987 bytes (from 6827019 to 6823032). Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: x86@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-05Add support for GCC-4.5's __builtin_unreachable() to compiler.h (v2)David Daney2-0/+19
Starting with version 4.5, GCC has a new built-in function __builtin_unreachable() that can be used in places like the kernel's BUG() where inline assembly is used to transfer control flow. This eliminated the need for an endless loop in these places. The patch adds a new macro 'unreachable()' that will expand to either __builtin_unreachable() or an endless loop depending on the compiler version. Change from v1: Simplify unreachable() for non-GCC 4.5 case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-03x86, apic: Enable lapic nmi watchdog on AMD Family 11hMikael Pettersson1-1/+1
The x86 lapic nmi watchdog does not recognize AMD Family 11h, resulting in: NMI watchdog: CPU not supported As far as I can see from available documentation (the BKDM), family 11h looks identical to family 10h as far as the PMU is concerned. Extending the check to accept family 11h results in: Testing NMI watchdog ... OK. I've been running with this change on a Turion X2 Ultra ZM-82 laptop for a couple of weeks now without problems. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: <stable@kernel.org> LKML-Reference: <19223.53436.931768.278021@pilspetsen.it.uu.se> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-03GFS2: Fix glock refcount issuesSteven Whitehouse1-13/+8
This patch fixes some ref counting issues. Firstly by moving the point at which we drop the ref count after a dlm lock operation has completed we ensure that we never call gfs2_glock_hold() on a lock with a zero ref count. Secondly, by using atomic_dec_and_lock() in gfs2_glock_put() we ensure that at no time will a glock with zero ref count appear on the lru_list. That means that we can remove the check for this in our shrinker (which was racy). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03writeback: remove unused nonblocking and congestion checks (gfs2)Wu Fengguang1-12/+0
No one is calling wb_writeback and write_cache_pages with wbc.nonblocking=1 any more. And lumpy pageout will want to do nonblocking writeback without the congestion wait. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: drop rindex glock to refresh rindex listBenjamin Marzinski1-2/+6
When a gfs2 filesystem is grown, it needs to rebuild the rindex list to be able to use the new space. gfs2 does this when the rindex is marked not uptodate, which happens when the rindex glock is dropped. However, on a single node setup, there is never any reason to drop the rindex glock, so gfs2 never invalidates the the rindex. This patch makes gfs2 automatically drop the rindex glock after filesystem grows, so it can refresh the rindex list. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Tag all metadata with jidSteven Whitehouse5-3/+13
There are two spare field in the header common to all GFS2 metadata. One is just the right size to fit a journal id in it, and this patch updates the journal code so that each time a metadata block is modified, we tag it with the journal id of the node which is performing the modification. The reason for this is that it should make it much easier to debug issues which arise if we can tell which node was the last to modify a particular metadata block. Since the field is updated before the block is written into the journal, each journal should only contain metadata which is tagged with its own journal id. The one exception to this is the journal header block, which might have a different node's id in it, if that journal was recovered by another node in the cluster. Thus each journal will contain a record of which nodes recovered it, via the journal header. The other field in the metadata header could potentially be used to hold information about what kind of operation was performed, but for the time being we just zero it on each transaction so that if we use it for that in future, we'll know that the information (where it exists) is reliable. I did consider using the other field to hold the journal sequence number, however since in GFS2's journaling we write the modified data into the journal and not the original data, this gives no information as to what action caused the modification, so I think we can probably come up with a better use for those 64 bits in the future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Locking order fix in gfs2_check_blk_stateSteven Whitehouse1-4/+10
In some cases we already have the rindex lock when we enter this function. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Remove dirent_first() functionSteven Whitehouse1-33/+1
This function only had one caller left, and that caller only called it for leaf blocks, hence one branch of the "if" was never taken. In addition the call to get_left had already verified the metadata type, so the function can be reduced to a single line of code in its caller. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Display nobarrier option in /proc/mountsSteven Whitehouse1-0/+3
Since the default is barriers on, this only displays the nobarrier option when that is active. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: add barrier/nobarrier mount optionsChristoph Hellwig3-0/+17
Currently gfs2 issues barrier unconditionally. There are various reasons to disable them, be that just for testing or for stupid devices flushing large battert backed caches. Add a nobarrier option that matches xfs and btrfs for this. Also add a symmetric barrier option to turn it back on at remount time. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: remove division from new statfs codeBenjamin Marzinski1-8/+9
It's not necessary to do any 64bit division for the statfs sync code, so remove it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Improve statfs and quota usabilityBenjamin Marzinski5-10/+100
GFS2 now has three new mount options, statfs_quantum, quota_quantum and statfs_percent. statfs_quantum and quota_quantum simply allow you to set the tunables of the same name. Setting setting statfs_quantum to 0 will also turn on the statfs_slow tunable. statfs_percent accepts an integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to do any early sync when the local number of blocks free changes by at least statfs_percent from the totoal number of blocks free. Setting statfs_percent to 0 disables this. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Use dquot_send_warning()Steven Whitehouse1-1/+9
This adds support to GFS2 to send quota warnings via netlink. Also it removes a stray \r which was left over from when the code used to print warnings on the console. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03VFS: Export dquot_send_warningSteven Whitehouse4-85/+114
Sending a message to userspace in a generic format to warn of events (e.g. quota exceeded) in the quota subsystem is a generically useful feature. This patch makes some minor changes to the send_message function from dquot.c renaming it quota_send_message, moving it to quota.c and exporting it for use by filesystems which do not use the dquot code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Add set_xquota supportSteven Whitehouse1-26/+172
This patch adds the ability to set GFS2 quota limit and warning levels via the XFS quota API. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Add get_xquota supportSteven Whitehouse1-0/+43
This adds support for viewing the current GFS2 quota settings via the XFS quota API. The setting of quotas will be addressed in a later patch. Fields which are not supported here are left set to zero. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com>
2009-12-03GFS2: Clean up gfs2_adjust_quota() and do_glock()Steven Whitehouse1-56/+26
Both of these functions contained confusing and in one case duplicate code. This patch adds a new check in do_glock() so that we report -ENOENT if we are asked to sync a quota entry which doesn't exist. Due to the previous patch this is now reported correctly to userspace. Also there are a few new comments, and I hope that the code is easier to understand now. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Remove constant argument from qd_get()Steven Whitehouse1-4/+4
This function was only ever called with the "create" argument set to true, so we can remove it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.