aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator/lp87565-regulator.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-05-19mfd: lp87565: Move LP87565_regulator_id to .c fileLuca Ceresoli1-0/+11
This enum is used only internally to the regulator driver for buck indexes. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-22regulator: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200719200623.61524-1-grandmaster@al2klimov.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: lp87565: enable voltage regardless of ENx pinLuca Ceresoli1-2/+19
This driver enables outputs by setting bit EN_BUCKn in the BUCKn_CTRL1 register. However, if bit EN_PIN_CTRLn in the same register is set, the output is actually enabled only if EN_BUCKn is set AND an enable pin is active. Since the driver does not touch EN_PIN_CTRLn, the choice is left to the hardware, which in turn gets this bit from OTP memory, and in absence of OTP data it uses a default value that is documented in the datasheet for LP8752x, but not for LP8756x. Thus the driver doesn't really "know" whether it is actually enabling the output or not. In order to make sure activation is always driver-controlled, just clear the EN_PIN_CTRLn bit. Now all activation solely depend on the EN_BUCKn bit. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200622204329.11147-2-luca@lucaceresoli.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-08regulator: use linear_ranges helperMatti Vaittinen1-1/+1
Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09regulator: lp87565: Simplify lp87565_buck_set_ramp_delayAxel Lin1-3/+2
Use rdev->regmap/&rdev->dev instead of lp87565->regmap/lp87565->dev. In additional, the lp87565->dev actually is the parent mfd device, so the dev_err message is misleading here with lp87565->dev. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190908035720.17748-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24regulator: lp87565: Fix probe failure for "ti,lp87565"Axel Lin1-4/+4
The "ti,lp87565" compatible string is still in of_lp87565_match_table, but current code will return -EINVAL because lp87565->dev_type is unknown. This was working in earlier kernel versions, so fix it. Fixes: 7ee63bd74750 ("regulator: lp87565: Add 4-phase lp87561 regulator support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190711113517.26077-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-15Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-1/+17
Pull MFD updates from Lee Jones: "Core Frameworks: - Set 'struct device' fwnode when registering a new device New Drivers: - Add support for ROHM BD70528 PMIC New Device Support: - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC - Add support for RK809 and RK817 to Rockchip RK808 - Add support for Lid Angle to ChromeOS core - Add support for CS47L15 CODEC to Madera core - Add support for CS47L92 CODEC to Madera core - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core - Add support for Add Intel Elkhart Lake PCH to Intel LPSS New Functionality: - Provide regulator supply information when registering; madera-core - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic - Allow over-riding power button press via Device Tree; rohm-bd718x7 - Differentiate between running processors; cros_ec_dev Fix-ups: - Big header file update; cros_ec_commands.h - Split header per-subsystem; rohm-bd718x7 - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables - Trivial; sorting, coding style; intel-lpss-pci - Only remove Power Off functionality if set locally; rk808 - Make use for Power Off Prepare(); rk808 - Fix spelling mistake in header guards; stmfx - Properly free IDA resources - SPDX fixups; cs47lXX-tables, madera - Error path fixups; hi655x-pmic Bug Fixes: - Add missing break in case() statement - Repair undefined behaviour when not initialising variables; arizona-core, madera-core - Fix reference to Device Tree documentation; madera" * tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk mfd: madera: Fixup SPDX headers mfd: madera: Remove some unused registers and fix some defaults mfd: intel-lpss: Release IDA resources mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs mfd: cs5535-mfd: Remove ifdef OLPC noise mfd: stmfx: Fix macro definition spelling dt-bindings: mfd: Add link to ROHM BD71847 Datasheet MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice mfd: rk808: Prepare rk805 for poweroff mfd: rk808: Check pm_power_off pointer mfd: cros_ec: differentiate SCP from EC by feature bit dt-bindings: Add binding for cros-ec-rpmsg mfd: madera: Add Madera core support for CS47L92 mfd: madera: Add Madera core support for CS47L15 mfd: madera: Update DT bindings to add additional CODECs mfd: madera: Add supply mapping for MICVDD mfd: madera: Fix potential uninitialised use of variable mfd: madera: Fix bad reference to pinctrl.txt file ...
2019-07-02regulator: lp87565: Fix missing break in switch statementColin Ian King1-0/+1
Currently the LP87565_DEVICE_TYPE_LP87561_Q1 case does not have a break statement, causing it to fall through to a dev_err message. Fix this by adding in the missing break statement. Addresses-Coverity: ("Missing break in switch") Fixes: 7ee63bd74750 ("regulator: lp87565: Add 4-phase lp87561 regulator support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-17regulator: lp87565: Add 4-phase lp87561 regulator supportKeerthy1-1/+16
The LP8756x family has a single output 4-phase regulator configuration. Add support for the same. The control lies in the master buck which is buck0 for 4-phase configuration. Enable/disable/voltage set happen via buck0 registers. Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-18regulator: lp87565: Convert to use regulator_set/get_current_limit_regmapAxel Lin1-40/+7
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-18regulator: lp87565: Fix missing register for LP87565_BUCK_0Axel Lin1-1/+1
LP87565_BUCK_0 is missed, fix it. Fixes: f0168a9bf ("regulator: lp87565: Add support for lp87565 PMIC regulators") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-28regulator: lp87565: Constify lp87565_buck_ramp_delay and lp87565_buck_opsAxel Lin1-2/+2
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17regulator: lp87565: Enable LP87565_BUCK_CTRL_1_FPWM_MP_0_2Keerthy1-1/+2
Buck10 is a multi(dual) phase regulator. So as part of enabling it turn on the LP87565_BUCK_CTRL_1_FPWM_MP_0_2 bit which forces it to operate always in multiphase and forced-PWM operation mode. This helps improve the transient voltage response while switching OPP. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-17regulator: lp87565: Add margin while populating ramp_delayKeerthy1-6/+10
The slew rate might need a +/- 15% margin as per the latest data manual: http://www.ti.com/lit/ds/snvsb22/snvsb22.pdf Hence take a conservative approach to program 85% of the original hardware slew rate so that the software accommodates the margin delay while voltage switching. Hence reduce the default ramp_delay populated in the descriptors also by 15%. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-20regulator: lp87565: Fix the initial voltage rangeKeerthy1-1/+1
The latest documentation reveals that initial voltage range that is supported is starting from 0.6V for all the PMICs belonging to lp87565 family. Fix the same. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixes: f0168a9bf ("regulator: lp87565: Add support for lp87565 PMIC regulators") Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-07regulator: lp87565: Fix the GPL headerKeerthy1-2/+1
Fix the GPL header to reflect GPL v2 Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-24regulator: lp87565: Add support for lp87565 PMIC regulatorsKeerthy1-0/+237
The regulators set consists of 4 BUCKs. The output voltages are configurable and are meant to supply power to the main processor and other components. The ramp delay is configurable for all BUCKs. The BUCKs can be configured in single phase or multiphase modes. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.