aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator/wm8350-regulator.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-12regulator: Convert WM835x to use get_voltage_sel()Mark Brown1-10/+6
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Report actual configured voltage to set_voltage()Mark Brown1-2/+6
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06regulator: wm8350-regulator - fix the logic of checking REGULATOR_MODE_STANDBY modeAxel Lin1-1/+1
In wm8350_dcdc_set_mode(), we set DCx_SLEEP bit of WM8350_DCDC_SLEEP_OPTIONS register for REGULATOR_MODE_STANDBY mode. ( DCx_SLEEP bits: 0: Normal DC-DC operation 1: Select LDO mode ) In wm8350_dcdc_get_mode(), current logic to determinate REGULATOR_MODE_STANDBY mode is just reverse. ( sleep is set should mean REGULATOR_MODE_STANDBY mode. ) Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27wm8350-regulator: fix wm8350_register_regulator error handlingAxel Lin1-1/+1
In the case of platform_device_add() fail, we should call platform_device_put() instead of platform_device_del() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-07mfd: Add a data argument to the WM8350 IRQ free functionMark Brown1-1/+1
To better match genirq. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-03regulator: Implement enable_time() for WM835x ISINKsMark Brown1-0/+46
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-01regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraintsMark Brown1-1/+3
The WM8350 LED driver needs to be able to enable and disable the regulators it is using. Previously the core wasn't properly enforcing status change constraints so the driver was able to function but this has always been intended to be required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-13mfd: Mask and unmask wm8350 IRQs on request and freeMark Brown1-3/+0
Bring the WM8350 IRQ API more in line with the generic IRQ API by masking and unmasking interrupts as they are requested and freed. This is mostly just a case of deleting the mask and unmask calls from the individual drivers. The RTC driver is changed to mask the periodic IRQ after requesting it rather than only unmasking the alarm IRQ. If the periodic IRQ fires in the period where it is reqested then there will be a spurious notification but there should be no serious consequences from this. The CODEC drive is changed to explicitly disable headphone jack detection prior to requesting the IRQs. This will avoid the IRQ firing with no jack set up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Convert wm8350 IRQ handlers to irq_handler_tMark Brown1-2/+5
This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-22regulator: add check index of wm8350->pmic.pdev[]Roel Kluin1-0/+2
Ensure that reg is within the bounds of array wm8350->pmic.pdev[]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: Set MODULE_ALIAS for regulator driversMark Brown1-0/+1
Several of the regulator drivers didn't have MODULE_ALIAS so couldn't be auto loaded. Add the MODULE_ALIAS in case they do get built as modules. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Implement list_voltage for WM835x LDOs and DCDCsMark Brown1-0/+29
Implement the recently added voltage step listing API for the WM835x DCDCs and LDOs. DCDCs can use values up to 0x66, LDOs can use the full range of values in the mask. Both masks are the lower bits of the register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Fix get_mode() for WM835x DCDCsMark Brown1-6/+18
The WM835x regulators need a different register checking for force mode on each DCDC. Previously the force mode status for DCDC1 was checked. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Pass regulator init data as explict argument when registeringMark Brown1-1/+1
Rather than having the regulator init data read from the platform_data member of the struct device that is registered for the regulator make the init data an explict argument passed in when registering. This allows drivers to use the platform data for their own purposes if they wish. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31Regulator: Push lock out of _notifier_call_chain + add voltage change event.Jonathan Cameron1-0/+2
Regulator: Push lock out of _notifier_call_chain and into caller functions (side effect of fixing deadlock in regulator_force_disable) + Add a voltage changed event. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-30leds: Fix bounds checking of wm8350->pmic.ledRoel Kluin1-1/+1
Fix bounds checking of wm8350->pmic.led Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08leds: Add WM8350 LED driverMark Brown1-0/+91
The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-04mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown1-0/+7
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-13regulator: Add WM8350 regulator supportMark Brown1-0/+1431
The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.