aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2013-08-14regulator: 88pm800: forever loop in pm800_regulator_probe()Dan Carpenter1-1/+1
This is supposed to be testing "i < ARRAY_SIZE()" instead of just "ARRAY_SIZE()". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13regulator: da9210: Remove redundant MODULE_ALIASAxel Lin1-1/+0
The modalias is set by the MODULE_DEVICE_TABLE, thus remove redundant MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13regulator: 88pm800: Fix checking whether num_regulator is validAxel Lin1-3/+6
The code to check whether num_regulator is valid is wrong because it should iterate all array entries rather than break from the for loop if pdata->regulators[i] is NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13regulator: s2mps11: Fix setting ramp_delayAxel Lin1-2/+6
Current code has wrong mask and val arguments for updating ramp_delay. Fix it. Also ensure the return value of get_ramp_delay() won't greater than 3 because the mask field for ramp_val only takes 2 bits. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13regulator: s2mps11: Fix wrong arguments for regmap_update_bits() callAxel Lin1-2/+2
Current code calls regmap_update_bits() with mask and val arguments swapped. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12regulator: palmas: model SMPS10 as two regulatorsKishon Vijay Abraham I1-6/+24
SMPS10 has two outputs OUT1 and OUT2 and have one input IN1. SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 configures it in BOOST mode. For BYPASS mode regulator_allow_bypass() API can be used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be enabled using regulator_enable(). [ axel.lin@ingics.com : Simplify regulator_desc setting for SMPS10_[OUT1|OUT2] Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-09regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.cAxel Lin2-86/+86
Move regulator_list_voltage_{linear,linear_range,table} helper functions to helpers.c. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-08regulator: max8660: fix build warningsDaniel Mack1-3/+3
Fix a build warning for !CONFIG_OF and a cast from void* to unsigned int which is invalid on 64bit machines. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07regulator: core: Move helpers for drivers out into a separate fileMark Brown3-342/+362
Reduce the size of core.c a bit. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-07Merge remote-tracking branch 'regulator/topic/linear-range' into regulator-helpersMark Brown5-187/+162
2013-08-06regulator: da9210: New driverSteve Twiss4-0/+496
I2C driver for the Dialog DA9210 Multi-phase 12A DC-DC Buck. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-02regulators: max8660: add DT bindingsDaniel Mack1-1/+81
This patch adds devicetree bindings for max8660, along with some documentation. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-02regulator: pfuze100: Fix off-by-one for max_register settingAxel Lin1-1/+1
max_register should be register count - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-02regulators: max8660: add a shorthand to &client->devDaniel Mack1-7/+8
No functional change, just makes the code shorter. [Resolved conflict with platdata patch -- broonie] Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-02regulators: max8660: use i2c_id->driver_data rather than ->nameDaniel Mack1-3/+10
Introduce an enum and denote the device type via struct i2c_id's driver_data field rather than comparing strings. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31regulator: pfuze100: Simplify pfuze100_set_ramp_delay implementationAxel Lin1-16/+5
Simplify the equation to calculate ramp_delay. Below equations are equivalent: ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 50000 / (4 * ramp_delay); ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 12500 / ramp_delay; So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different equations. Also use rdev->desc->vsel_reg instead of run-time calculate register address. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31regulator: core: Provide hints to the core about optional suppliesMark Brown1-0/+59
While the majority of supplies on devices are mandatory and can't be physically omitted for electrical reasons some devices do have optional supplies and need to know if they are missing, MMC being the most common of these. Currently the core accurately reports all errors when regulators are requested since it does not know if the supply is one that must be provided even if by a regulator software does not know about or if it is one that may genuinely be disconnected. In order to allow this behaviour to be changed and stub regulators to be provided in the former case add a new regulator request function regulator_get_optional() which provides a hint to the core that the regulator may genuinely not be connected. Currently the implementation is identical to the current behaviour, future patches will add support in the core for returning stub regulators in the case where normal regulator_get() fails and the board has requested it. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Chris Ball <cjb@laptop.org>
2013-07-30regulator: use dev_get_platdata()Jingoo Han38-43/+43
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with high bit setAxel Lin1-8/+8
Current code adjust min_uV and uV_step but missed adjusting the n_voltages setting. When BIT6 is clear: n_voltages = (1975000 - 400000) / 25000 + 1 = 64 When BIT6 is set: n_voltages = (3300000 - 800000) / 50000 + 1 = 51 The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved. When using regulator_list_voltage_linear, the n_voltages does matter here because wrong n_voltages setting make the equation return wrong result. e.g. if selector is 63, regulator_list_voltage_linear returns 800000 + (50000 * 63) = 4000000 It should return -EINVAL if the selector is in the range of 51 ~ 63. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Use regulator_map_voltage_ascendAxel Lin1-0/+1
All table based voltage list have ascendant order. Use regulator_map_voltage_ascend for them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Fix module alias prefixAxel Lin1-1/+1
i2c drivers use "i2c:" prefix for module alias. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Use i2c_[set|get]_clientdataAxel Lin1-2/+2
Since this is a i2c driver, use i2c_[set|get]_clientdata instead of dev_[set|get]_drvdata. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: REGULATOR_PFUZE100 needs to select REGMAP_I2CAxel Lin1-0/+1
This fixes below build errors: CC [M] drivers/regulator/pfuze100-regulator.o drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default] drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe': drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driverRobin Gong1-0/+1
Fix building error on x86_64 and i386: WARNING: modpost: missing MODULE_LICENSE() in drivers/regulator/pfuze100-regulator.o Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28regulator: da903x: Convert da9034 ldo12 to use linear rangesAxel Lin1-35/+10
The voltage table of da9034 LDO12 is: 1700000, 1750000, 1800000, 1850000, 1900000, 1950000, 2000000, 2050000 2700000, 2750000, 2800000, 2850000, 2900000, 2950000, 3000000, 3050000 The voltage table is composed of two linear ranges: for selector 0 ... 7: volt = 1700000 + 50000 * selector for selector: 8 ... 15: volt = 2700000 + 50000 * (selector - 8) This patch converts da9034 LDO12 to use newly introduced helpers for multiple linear ranges. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-26regulator:pfuze100: fix build warning and correct the binding docRobin Gong1-1/+1
fix building warning and correct the binding doc Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25regulator: pfuze100: add pfuze100 regulator driverRobin Gong3-0/+462
Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25regulator: core: convert class code to use dev_groupsGreg Kroah-Hartman1-12/+16
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the regulator class code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24regulator: tps65912: Convert tps65912_ops_ldo to use linear rangesAxel Lin1-20/+19
The ldo voltage table is composed of linear ranges. Below is the equation in original code (tps65912_vsel_to_uv_ldo): 0 ... 32: uv = vsel * 25000 + 800000; 33 ... 60: uv = (vsel - 32) * 50000 + 1600000; = (vsel -33) * 50000 + 1650000; 61 ...63: uv = (vsel - 60) * 100000 + 3000000; = (vsel - 61) * 100000 + 3100000; This patch converts tps65912_ops_ldo to use multiple linear ranges APIs. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24regulator: as3711: Convert to use linear rangesAxel Lin1-132/+31
The SD, ALDO, and DLDO vlotage tables are composed of linear ranges. This patch converts as3711 to use newly introduced helpers for multiple linear ranges. Below is the voltage table on datasheet: SD: 00h: DC/DC powered down 01h-40h: Volt = 0.6V + sdx_vsel * 12.5mV 41h-70h: Volt = 1.4V + (sdx_vsel - 40h) * 25mV 71h-7Fh: Volt = 2.6V + (sdx_vsel - 70h) * 50mV ALDO: 0h-0Fh: 1.2V + ldox_vsel * 50mV 10h-1Fh: 1.8V + (ldox_vsel - 10h) * 100mV DLDO: 00h-10h: Volt = 0.9V + ldox_vsel * 50mV 11h-1fh: Do not use 20h-3fh: Volt = 1.75V + (ldox_vsel - 20h) * 50mV Note, when convert to use linear ranges APIs, the equation for SD needs below adjustment because the linear ranges APIs wiil substract range->min_sel when apply the equation. SD ( the equation to be used with linear ranges APIs ) 01h-40h: Volt = 0.6125V + (sdx_vsel - 1h) * 12.5mV 41h-70h: Volt = 1.425V + (sdx_vsel - 41h) * 25mV 71h-7Fh: Volt = 2.650V + (sdx_vsel - 71h) * 50mV Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19regulator: 88pm800: Add missing n_voltages setting for bucksAxel Lin1-6/+8
Some regulator APIs are broken if n_voltages setting is not set. e.g. regulator_count_voltages(), regulator_list_voltage(), and regulator_can_change_voltage() do not work if n_voltages setting is missing. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19regulator: 88pm800: Depend on MFD_88PM800 rather than MFD_88PM800=yAxel Lin1-1/+1
This driver can be built as a module, make it depend on MFD_88PM800. Otherwise, we are not able to select this driver when MFD_88PM800=m. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19regulator: 88pm800: Add missing config.of_node setting for regulator registerAxel Lin1-0/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19regulator: 88pm800: add regulator driver for 88pm800Chao Xie3-0/+388
Add the regulator driver for PMIC 88pm800 including device tree support. 88pm800 is an I2C-based power-management IC containing voltage regulators, a real-time clock, and some general purpose ADC devices, Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19Merge remote-tracking branch 'regulator/topic/linear-range' into HEADMark Brown4-152/+152
2013-07-18regulator: core: Ensure selector is mappedMark Brown1-0/+2
Clearly the testing only covered the bottom range. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-18regulator: core: Allow fixed voltage range in multiple linear rangesAxel Lin1-3/+9
Current code does not allow fixed voltage range in multiple linear ranges. If someone does set range->uV_step == 0 in one of the linear ranges, we hit divided by zero bug. This patch fixes this issue. For fixed voltage range, return any selector means the same voltage. Thus just return 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-18regulator: build: Sort KconfigMark Brown2-123/+123
Reduces merge issues if nothing else. Signed-off-by: Mark Brown <broonie@kernel.org>
2013-07-18regulator: core: Use the power efficient workqueue for delayed powerdownMark Brown1-2/+3
There is no need to use a normal per-CPU workqueue for delayed power downs as they're not timing or performance critical and waking up a core for them would defeat some of the point. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
2013-07-15regulator: s2mps11: Convert driver completely to use set_ramp_delay callbackYadwinder Singh Brar1-53/+9
Since now we have ramp_delay and ramp_disable as standard regulator constraints and DT part using it so this patch removes legacy part i.e. getting ramp_delayxx and ramp_enable from pdata since it can be passed as standard regulator constraints. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: s2mps11: Add DT supportYadwinder Singh Brar1-11/+38
This patch adds DT support for parsing regulators constraints for parent(mfd) node and moves some common intialising code out of loop while registering. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: s2mps11: Implement set_ramp_rate callback for bucksYadwinder Singh Brar1-0/+117
Implementing set_ramp_rate() and using standard constraints for getting ramp_delay and ramp_disable, instead of getting it as s2mps11 specific data through platform data, makes driver more compliant with framework and reduces the complexity for adding DT support. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15Merge branch 'topic/ramp' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-secMark Brown2-6/+13
2013-07-15regulator: s2mps11: Implement set_voltage_time_sel() ops for bucksYadwinder Singh Brar1-1/+52
Currently driver uses local struct s2mps11_info to store ramp rate for bucks whic its getting through platform data, so instead of using regulator constraints it should use s2mps11_info to calculate ramp delay. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: core: Remove redundant checksYadwinder Singh Brar1-3/+2
In function _regulator_do_set_voltage(), old_selector gets intialised only if (_regulator_is_enabled(rdev) && rdev->desc->ops->set_voltage_time_sel && rdev->desc->ops->get_voltage_sel)) is true. Before calling set_voltage_time_sel() we checks if (old_selector >= 0) and it will true if it got intialised properly. so we don't need to check again _regulator_is_enabled(rdev) && rdev->desc->ops->set_voltage_time_sel before calling set_voltage_time_sel(). Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: core: Add support for disabling ramp delayYadwinder Singh Brar2-5/+13
Some hardwares support disabling ramp delay, so adding ramp_disable flag to constraints. It will be used to figure out whether ramp_delay in constraints is explicitly set to zero or its unintialized (zero by default). And we don't need to call set_voltage_time_sel() for regulators for whom ramp delay is disabled in constraints. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: lp872x: fix a build waring and coding stylesMilo Kim1-4/+5
Fix a warning below. drivers/regulator/lp872x.c:910:33: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] And checkpatch warnings are fixed. WARNING: space prohibited before semicolon Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: wm8350: Convert to use linear rangesMark Brown1-38/+17
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: wm831x-ldo: Convert to use linear rangesMark Brown1-80/+24
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15regulator: wm8400: Use linear rangesMark Brown1-34/+16
Signed-off-by: Mark Brown <broonie@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.