aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2012-11-27regulator: da9055: Select maximum current in specific range for set_current_limitAxel Lin1-12/+9
Selecting the minimal value is only true for voltage regulators. For current regulators the maximum in the given range should be selected instead. This issue was reported by Heiko Stuebner for gpio-regulator driver [1], and the conclusion is to select the max current for current regulators [2]. [1] https://lkml.org/lkml/2012/8/5/162 [2] https://lkml.org/lkml/2012/8/6/183 This patch also ensures da9055_buck_set_current_limit return -EINVAL when the supported current limit does not meet the request range. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27regulator: tps6586x: fix build warning in debug buildLaxman Dewangan1-1/+1
When building the driver in debug mode, it generates warning as drivers/regulator/tps6586x-regulator.c: In function 'tps6586x_regulator_probe': drivers/regulator/tps6586x-regulator.c:392:9: warning: 'id' is used uninitialized in this function [-Wuninitialized] Fix this warning. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27regulator: tps51632: Fix writing to wrong register when enable_pwm_dvfs is setAxel Lin1-1/+1
When tps->enable_pwm_dvfs is true, write to TPS51632_VOLTAGE_BASE_REG rather than TPS51632_VOLTAGE_SELECT_REG. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27regulator: da9055: Use linear_min_sel and regulator_[map|list]_voltage_linearAxel Lin1-47/+8
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27Merge branches 'topic/da9055' and 'topic/tps51632' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-minMark Brown4-0/+1038
2012-11-27regulator: palmas: Use linear_min_sel and regulator_[map|list]_voltage_linearAxel Lin1-32/+5
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27regulator: core: Allow specific minimal selector for starting linear mappingAxel Lin1-0/+6
Some drivers (at least 3 drivers) have such variant of linear mapping that the first few selectors are invalid and the reset are linear mapping. Let's support this case in core. This patch adds linear_min_sel in struct regulator_desc, so we can allow specific minimal selector for starting linear mapping. Then extends regulator_[map|list]_voltage_linear() to support this feature. Note that for selectors less than min_linear_index, we need count them to n_voltages so regulator_list_voltage() won't fail while checking the boundary for selector before calling list_voltage callback. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27Merge branch 'topic/hotplug' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-max8997Mark Brown63-279/+2002
Conflicts: drivers/regulator/max8997.c
2012-11-27regulator: add device tree support for max8997Thomas Abraham1-2/+146
Add device tree based discovery support for max8997. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-24regulator: max8997: limit the number of dvs registers programmed in non-dvs modeThomas Abraham1-3/+6
In case the gpio based volatage selection mode is not used for either of buck 1/2/5, then only the BUCKxDVS1 register need to be programmed. So determine whether dvs mode is used and limit the loop count appropriately. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-24regulator: max8997: reorder buck1/2/5 dvs setup codeThomas Abraham1-13/+13
The BUCKxDVSx register programming is now moved prior to setting up of the gpio based dvs mode. This will ensure that all the BUCKxDVSx registers are programmed with appropriate voltage values before the gpio based dvs mode is selected for buck1/2/5. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-24regulator: tps65090: Add MODULE_ALIASAxel Lin1-0/+1
This driver can be built as a module, add MODULE_ALIAS for it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23regulator: max8973: provide enable/disable if external control disabledLaxman Dewangan1-1/+1
If external control is enabled then do not provide regulator enable/disable apis. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23regulator: add a regulator driver for the AS3711 PMICGuennadi Liakhovetski3-0/+387
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23regulator: tps80031: Implement list_voltage and set n_voltages = 1 for fixed regulatorsAxel Lin1-1/+5
Implement list_voltage for fixed regulators, otherwise regulator_is_supported_voltage() returns 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23regulator: tps80031: Trivial cleanupsAxel Lin1-6/+4
This patch includes below cleanups: - Fix typo in comment - Fix showing wrong register in dev_err - Remove unnecessary rinfo variable - Add TPS80032 to MODULE_DESCRIPTION Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-22regulator: max8973: Fix callback setting for max8973_dcdc_ops.enableAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-21regulator: da9055: Properly handle voltage range that doesn't start with 0 offsetAxel Lin1-30/+50
This patch implements map_voltage and list_voltage callbacks to properly handle the case voltage range that doesn't start with 0 offset. Now we adjust the selector in map_voltage() before calling set_voltage_sel(). And return 0 in list_voltage() for invalid selectors. With above change, we can remove da9055_regulator_set_voltage_bits function. One tricky part is that we need adding voffset to n_voltages. Although for the cases "selector < voffset" are invalid, we need add voffset to n_voltage so regulator_list_voltage() won't fail while checking the boundary for selector before calling list_voltage callback. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton56-62/+62
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: wm831x: Set the new rather than old value for DVS VSELMark Brown1-1/+1
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-11-20Merge branch 'topic/tps6586x' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-hotplugMark Brown1-25/+154
Conflicts: drivers/regulator/tps6586x-regulator.c
2012-11-20regulator: remove use of __devinitBill Pemberton57-78/+78
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton56-62/+62
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20Merge branches 'topic/tps51632', 'topic/tps80031', 'topic/vexpress', 'topic/max8925', 'topic/gpio' and 'topic/tps65090' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-hotplugMark Brown9-64/+1658
2012-11-19regulator: max8973: add regulator driver supportLaxman Dewangan3-0/+516
The MAXIM MAX8973 high-efficiency, three phase, DC-DC step-down switching regulator delievers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. Add regulator driver for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-16regulator: da9055: Fix checking wrong value in da9055_gpio_initAxel Lin1-1/+1
Check pdata->gpio_rsel && pdata->gpio_rsel[id] for the case GPI pin is muxed with regulator to select the regulator register set A/B for voltage ramping. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-15regulator: tps80031: add prefix TPS80031 on common defines.Laxman Dewangan1-38/+42
Pefix "TPS80031" is added on all defines of tps80031 header to avoid conflict with other header definitions. Update the regualtor driver of tps80031 to use the same name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-15regulator: DA9055 regulator driverAshish Jangam3-0/+674
This is the Regulator patch for the DA9055 PMIC and has got dependency on the DA9055 MFD core. This patch support all of the DA9055 regulators. The output voltages are fully programmable through I2C interface only. The platform data with regulation constraints is passed down from the board to the regulator. This patch is functionaly tested on SMDK6410 board. DA9055 Evaluation board was connected to the SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-15mfd: tps6586x: move regulator dt parsing to regulator driverLaxman Dewangan1-25/+154
Moving regulator node parsing to regulator driver in place of parsing it on mfd driver. The motivation for this change are: - MFD core driver should not depends on regulator and able to instantiate device without regulator. - The API for matching regulators are in regulator core and it is good that regulator driver only calls this API. - Regulator specific support should be in regulator driver only to ease any enhancement/modification for regulators. - The regulator driver is now registered as mfd sub device and all regulator registration is done from single probe call. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-15Merge remote-tracking branches 'regulator/fix/gpio', 'regulator/fix/put' and 'regulator/fix/supp-volt' into tmpMark Brown1-12/+18
2012-11-15regulator: fix voltage check in regulator_is_supported_voltage()Marek Szyprowski1-1/+1
regulator_is_supported_voltage() should return true only if the voltage of fixed/constant regulator is between min_uV and max_uV. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-11-14regulator: gpio-regulator: Catch 'no states property' misuseLee Jones1-0/+5
A selection of voltage or current values (AKA states) should always be specified when using a GPIO regulator. If there are no switchable states then the fixed regulators should be used instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-14regulator: core: Avoid deadlock when regulator_register failsCharles Keepax1-11/+17
When regulator_register fails and exits through the scrub path the regulator_put function was called whilst holding the regulator_list_mutex, causing deadlock. This patch adds a private version of the regulator_put function which can be safely called whilst holding the mutex, replacing the aforementioned call. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13regulator: gpio-regulator: fix can't find regulator node in dtFrank Li1-0/+1
Need initilize of_node in regulator config when register regulator, otherwise regulator driver think it is no-dt device. in regulator_dev_lookup list_for_each_entry(r, &regulator_list, list) if (r->dev.parent && node == r->dev.of_node) return r r->dev.of_noe will be zero if miss config in cfg. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13regulator: tps80031: add regulator driver for tps80031Laxman Dewangan3-0/+799
Add regulator driver for Texas Instrument TPS80031/TPS80032 device. TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. It has 5 configurable step-down converters, 11 general purpose LDOs, VBUS generator and digital output to control regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-07regulator: max8925: support dt for regulatorQing Xu1-3/+69
Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01regulator: tps51632: Fix trivial typo for TPS51632 Kconfig help textAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-28Regulator: core: Unregister when gpio request fails.Andrew Lunn1-1/+2
If the gpio_request_one() fails, or returns EPROBE_DEFER, the regulator must be device_unregister()ed. When this is not done, there are WARNING: from sysfs: WARNING: at fs/sysfs/file.c:343 sysfs_open_file+0x238/0x268() Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-22regulator: max77686: Make max77686_enable() static.Yadwinder Singh Brar1-1/+1
This patch fixes a sparse warning. Since max77686_enable() is a callback,so it should be static. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: gpio-regulator: Allow use of GPIO controlled regulators though DTLee Jones1-0/+94
Here we provide the GPIO Regulator driver with Device Tree capability, so that when a platform is booting with DT instead of platform data we can still make full use of it. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: tps65090: add external control support for DCDCLaxman Dewangan1-20/+57
The TPS65090's DCDC output can also be enable/disable through the external digital input signal. Add support for enable/disable either through register access via I2C or through external control inputs. The external control inputs can be driven through GPIOs also and hence adding support for passing the GPIO number. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: tps65090: Add support for LDO regulatorsLaxman Dewangan1-0/+5
TPS65090 supports the two LDOs, LDO1 and LDO2. These are always ON regulators. The output on these LDOs are available once the input voltage available for these LDOs. Add support for these LDOs regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: tps65090: rename driver name and regulator nameLaxman Dewangan1-8/+8
To make the names proper and more appropriate: Rename the driver name from tps65090-regulator to tps65090-pmic. Rename the regulators from TPS65090_ID_* to TPS65090_REGULATOR_* Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: tps65090: Register all regulators in single probe callLaxman Dewangan1-56/+135
MFD driver registers the regulator driver once per device and hence it is require to register all regulators in single probe call. Following are details of changes done to achieve this: - Move the regulator enums to mfd header and remove the tps65090-regulator.h as it does not contain more info. - Add max regulator and register all regulators even if there is no regulator init data from platform. - Convert regulator init data to pointer type in platform data. - Add input supply name in regulator desc to provide input supply. - Separate desc information from driver information. - Disable external control bit to have control through register write. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: tps65910: fix BUG_ON() shown with vrtc regulatorAnilKumar Ch1-0/+7
Fix BUG_ON() error if tps65910 VRTC regulator is used with out rdev->desc->volt_table data. Recent changes in regulator core driver which add support for "regulator_list_voltage_table" have BUG_ON() if regulator descriptor do not voltage table information. This patch adds the voltage table information to fix the issue. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: max77686: Add set_suspend_disable/set_suspend_mode callbacks.Yadwinder Singh Brar1-7/+141
This patch implements set_suspend_disable callback for BUCKs which support only switch ON/OFF modes during system suspend state, and set_suspend_mode callbacks for LDOs which also suport Low power mode and switch ON/OFF modes. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: max77686: Use already set opmode while re-enabling regulators.Yadwinder Singh Brar1-2/+14
This patch adds basic support to take care of opmode(if any) which can be set by set_suspend_[disable/mode] callbacks. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: vexpress: Add terminating entry for vexpress_regulator_of_match tableAxel Lin1-0/+1
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15regulator: Versatile Express regulator driverPawel Moll3-0/+154
Implementation of the regulator framework driver for the Versatile Express voltage control. Devices without voltage constraints (ie. "regulator-[min|max]-microvolt" properties in the DT node) are treated as fixed (or rather read-only) regulators. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15regulator: core: Support for continuous voltage rangePawel Moll1-0/+5
Some regulators can set any voltage within the constraints range, not being limited to specified operating points. This patch makes it possible to describe such regulator and makes the regulator_is_supported_voltage() function behave correctly. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.