aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2012-06-08regulator: palmas: Slightly code change for better readabilityAxel Lin1-12/+16
It's a little bit hard to read that the "else" case means id == PALMAS_REG_SMPS10. if (id != PALMAS_REG_SMPS10){ do something for the cases id != PALMAS_REG_SMPS10; } else { do something for the case id == PALMAS_REG_SMPS10; } This patch changes above syntax to switch statement. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: palmas: Clear PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK bits in palmas_set_mode_smpsAxel Lin1-2/+1
Current code actually clears more bits than PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK bits. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: rc5t583: Simplify rc5t583_set_voltage_time_sel implementationAxel Lin1-11/+3
For linear mappings, we can use below equation to get the voltage difference between new_selector and old_selector: abs(new_selector - old_selector) * rdev->desc->uV_step Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: da903x: Don't read/write to DA9030_INVAL/DA9034_INVAL addressAxel Lin1-0/+6
For fixed voltage, DA9030_LDO13 and DA9034_LDO5, the info->vol_reg is DA9030_INVAL/DA9034_INVAL. It does not make sense to read/write to DA9030_INVAL/DA9034_INVAL address. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: isl6271a: Use regulator_[list|map]_voltage_linear for isl_fixed_opsAxel Lin1-9/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: core: Handle fixed voltage in map_voltage_linearAxel Lin1-0/+8
Fixed voltage is a kind of linear mapping where n_voltages is 1. This change allows [list|map]_voltage_linear to be used for fixed voltage. For fixed voltage, n_voltages is 1 and the only valid selector is 0. Thus we actually don't care the uV_step setting. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08regulator: core: Properly handle the case min_uV < rdev->desc->min_uV in map_voltage_linearAxel Lin1-0/+3
Properly handle the case if the specified min_uV is less than the voltage given by the lowest selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05regulator: tps6507x: Avoid duplicating the same mapping table for LDO2 and VDCDCxAxel Lin1-18/+2
The voltage mapping table for LDO2 is exactly the same as VDCDCx. Thus we can use one mapping table for both LDO2 and VDCDCx instead of duplicating the mapping table. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05regulator: tps6507x: Remove unused min_uV and max_uV from struct tps_infoAxel Lin1-12/+0
The min_uV and max_uV are not used in this driver. For table based voltage mappings, we can get min_uV and max_uV by info->table[0] and info->table[table_len -1]. Thus remove min_uV and max_uV from struct tps_info. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05regulator: max8649: fix missing regmap in rdevHaojian Zhuang1-0/+1
In probe(), rdev->regmap must be assigned. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max77686: Fix checkpatch warningsAxel Lin1-6/+7
Fix below checkpatch warnings: $ scripts/checkpatch.pl -f drivers/regulator/max77686.c ERROR: return is not a function, parentheses are not required + return (DIV_ROUND_UP(rdev->desc->uV_step WARNING: line over 80 characters + .ops = &max77686_buck_dvs_ops, \ total: 1 errors, 1 warnings, 339 lines checked Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max1586: Convert max1586_v6_ops to set_voltage_selAxel Lin1-22/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max1586: Convert max1586_v6_ops to regulator_list_voltage_tableAxel Lin1-23/+12
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: core: Use map_voltage_linear() if list_voltage_linear() is in use and nothing is setAxel Lin1-4/+10
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: gpio-regulator: populate selector from set_voltageHeiko Stübner1-3/+5
This was missing until now and the underlying _regulator_do_set_voltage is using this value when calling list_voltage. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: gpio-regulator: Fix finding of smallest valueHeiko Stübner1-2/+4
Commit 4dbd8f63f07a (regulator: gpio-regulator: Set the smallest voltage/current in the specified range) forgot to set the newly introduced best_val. Therefore it stayed always at INT_MAX thus breaking the setting of the voltage. Included is also an init value for target, as warnings about a possibly uninitialised target started appearing with this fix. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: gpio-regulator: do not pass drvdata pointer as referenceHeiko Stübner1-1/+1
Commit c172708d38a4 (regulator: core: Use a struct to pass in regulator runtime configuration) added the drvdata pointer only per reference to the new config array in the gpio-regulator. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: anatop: Use correct __devexit_p annotationAxel Lin1-1/+1
__devexit functions are discarded when CONFIG_HOTPLUG is not set, so the symbol needs to be referenced carefully. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: palmas: Fix wrong kfree callsAxel Lin1-7/+0
The devm_kzalloc function eliminates the need for manual resource releasing and simplify error handling. Resources allocated by devm_* are freed automatically on driver detach. Thus adding kfree calls here will introduce double free bug. The memory of desc array and the pointers to the rdev[] are allocated by devm_kzalloc call for struct palmas_pmic. struct palmas_pmic { struct palmas *palmas; struct device *dev; struct regulator_desc desc[PALMAS_NUM_REGS]; struct regulator_dev *rdev[PALMAS_NUM_REGS]; struct mutex mutex; int smps123; int smps457; int range[PALMAS_REG_SMPS10]; }; Which means we should not call kfree for pmic->rdev and pmic->desc. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: wm8350: Convert LDOs to set_voltage_sel()Mark Brown1-30/+8
Since there are two linear ranges for the LDO voltages provide a voltage mapping function and then use regulator_set_voltage_sel_regmap(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: max77686: Use regulator_map_voltage_linear for simple linear mappingsAxel Lin1-0/+2
Both max77686_ops and max77686_buck_dvs_ops use simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the defult regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Use regulator_map_voltage_linear for wm8350_dcdc_opsAxel Lin1-0/+1
wm8350_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: Change db8500-prcmu match names to reflect Device TreeLee Jones1-20/+20
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the db8500-prcum regulator driver so this is true. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: Change ab8500 match names to reflect Device TreeLee Jones1-11/+11
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the ab8500 regulator driver so this is true. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: fixed: Use of_match_ptr() for of_match_table entryAxel Lin1-3/+1
Use the new of_match_ptr() macro for the of_match_table pointer entry to avoid having to #define match NULL. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: MAX77686: Add Maxim 77686 regulator driverJonghwa Lee3-0/+346
Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8400: Use regulator_map_voltage_linear for wm8400_dcdc_opsAxel Lin1-0/+1
wm8400_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm831x-ldo: Use regulator_map_voltage_linear for wm831x_alive_ldo_opsAxel Lin1-0/+1
wm831x_alive_ldo_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8994: Convert wm8994_ldo1_ops to regulator_[list|map]_voltage_linearAxel Lin1-10/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: anatop: Convert to regulator_list_voltage_linear()Axel Lin1-12/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: palmas: Use regulator_[list|map]_voltage_linear() for palmas_ops_smps10Axel Lin1-7/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert DCDCs to set_voltage_sel() and linear voltagesMark Brown1-56/+8
The WM8350 DCDCs have a simple linear mapping from selectors to voltages so can be converted very simply to use the new infrastructure for a nice reduction in code size. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert to core regmap-based enable operationsMark Brown1-92/+29
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert to use core regmap vsel readbackMark Brown1-56/+19
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab8500: Let regulator core handle the case no delay for setting new voltage if regulator is offAxel Lin1-7/+0
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: lp3971: Use regulator_list_voltage_table()Axel Lin1-43/+23
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: tps6507x: Use regulator_list_voltage_table()Axel Lin1-57/+43
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: tps6105x: Use regulator_list_voltage_table()Axel Lin1-11/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: lp3972: Use regulator_list_voltage_table()Axel Lin1-66/+36
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab8500: Use regulator_list_voltage_table()Axel Lin1-40/+24
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab3100: Use regulator_list_voltage_table()Axel Lin1-36/+14
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: core: Use dev_get_regmap() to find the regmapMark Brown1-1/+4
If no regmap is explicitly specified then use dev_get_regmap() to obtain one. The driver must explicitly enable any actual usage of the regmap so there's no concern with unwanted usage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03regulator: Use newly added devres_release() rather than open codingMark Brown1-1/+1
devres_release() will call the destructor for the resource as well as freeing the devres data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03regulator: core: Call set_voltage_time_sel() only when the regulator is onAxel Lin1-2/+3
If the regulator is not on, it won't take time setting new voltage. So only call set_voltage_time_sel() to get the necessary delay when the regulator is on. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: core: Allow drivers to set voltage mapping table in regulator_descAxel Lin1-0/+25
Some regulator hardware use table based mapping can set volt_table in regulator_desc and use regulator_list_voltage_table() for their list_voltage callback. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-29Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds5-68/+70
Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-10/+10
Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-21Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds54-3230/+3878
Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
2012-05-20regulator: tps65910: use of_node of matched regulator being registerLaxman Dewangan1-7/+12
After getting matched regulators by using of_regulator_match(), initialize the config.of_node of regulator being register with of_regulator_match.of_node of that regulator. This is require for supporting regulator consumers in dt. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps65910: dt: support when "regulators" node foundLaxman Dewangan1-0/+4
The device tree binding for the tps65910 is described as: tps65911 { reg = <0x2d> ::::::::: regulators { compatible = "ti,tps65911"; ldo1_reg: ldo1 { /** regulator entry */ }; ldo2_reg: ldo2 { /** regulator entry */ }; :::::::::: }; }; Support the regulators functionality only when there is "regulators" child node available for tps65910. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.